Transparent images in cover flow view mode

Hi out there & hello to the forum.
I searched a bit, but all I found was a thread in the Finder and Dock section ([http://discussions.apple.com/thread.jspa?threadID=1553972&tstart=0]). Using CocoThumbX I managed to get the image transparent in Cover Flow in the Finder. But in iTunes the cover still has a white background. Does anyone know if this is a known bug in iTunes or if there is a workaround?
Best,
Fojel

I actually figured out the answer to this one myself, with the help of someone's previous post about creating new thumbnails with a little app called CocoThumbX, which can be used to strip image files of their thumbnails and create new ones. I almost gave up on it, because the new thumbnails I was generating from it didn't show up any clearer. But then I used it to remove thumbnails only, without creating new ones afterward, and the images now look as they should in cover flow. I don't know if there are any negative side effects of not having thumbnails, or even where the original thumbnails were located in the system, but wherever needed, the computer seems to be generating it's own thumbnails for the images, and they're looking good. Hope this helps.

Similar Messages

How can i Display my images in cover flow view in Keynote?

I am working on a project .I am on Mavericks . I need to make a presentation of my project ideas . My project involves showing some images in cover flow view . So, is there any way i can show my images in cover flow view in keynote or pages app or by using any other app .

Keynote is an screen based presentation application
Pages is a page layout application for print output
Coverflow is a viewing option of the finder to look at the contents of a folder
To create a slideshow of your images, open Keynote and drag and drop images from a folder into the Navigator pane then press the play button
The Navigator panel is the side panel on the left

Blurry images in cover flow view

why do my tiff files (primarily) look so blurry when I switch to cover flow view on my new mac? I've seen posts about this issue as far back as 2007- has apple still not fixed this, or is it just me? As a photographer it's a major annoyance to have to zoom in on each image to get a good look at it. Little help?

I actually figured out the answer to this one myself, with the help of someone's previous post about creating new thumbnails with a little app called CocoThumbX, which can be used to strip image files of their thumbnails and create new ones. I almost gave up on it, because the new thumbnails I was generating from it didn't show up any clearer. But then I used it to remove thumbnails only, without creating new ones afterward, and the images now look as they should in cover flow. I don't know if there are any negative side effects of not having thumbnails, or even where the original thumbnails were located in the system, but wherever needed, the computer seems to be generating it's own thumbnails for the images, and they're looking good. Hope this helps.

ITunes 7.3.2: ArtWork does not match Images on Cover Flow View and iPod

Hello everyone, this is my first post, thanks in advance for any and all help.
I have loaded most of my music collection onto iTunes, and authorized it to get album artwork. It has only found about 60% of my cover art (I have a lot of international discs, etc.), and of what it does find maybe 60% is correct. So I have spent a lot of time adding artwork by either scanning in cover art or cutting and pasting from the web. I go to "Get Info" and check the artwork tab all the time to make sure that only artwork that is correct or that I have added is attached to each of my song files.
However, I have noticed that there is a significant amount of my song files that, when I use cover flow view, or when I play the songs on my video iPod, the artwork that is on the artwork pane and what appears on the cover flow view don't match. Or the artwork that is in the artwork pane (and the only artwork in the get info artwork section) and what shows up on my iPod, don't match up. It is, for an OCD completist like me, rather annoying.
As an example, I have a lot of compilation albums. I have probably 13 different albums by different artists but which all have the same name of "The Ultimate Collection". There are some tracks for each album where the artwork pane and the cover flow view artwork match, but not all of the tracks.
I selected "group compilations when browsing", but that doesn't help. I selected all the tracks from the same album and clicked yes to whether it is a compilation, and that didn't work.
Does anyone have a simple, QUICK solution for making the artwork I have put in the artwork pane override or force itself on the cover flow view? Horrible phrasing I know, but thank you in advance for your help!

I had the same problem when I updated to 7.3, but I was able to fix it.
As far as I can tell, itunes 7.3 sees all music files (in your user/itunes/music folder) with the extension .mpg as quicktime movies, not mp3's and itunes won't let you add a cover to them. The problem is that songs imported as mp3's by previous versions of iTunes were all given the extension .mpg and not .mp3 (at least on my machine). I was able to fix the problem by simply changing the .mpg to .mp3 for all of my songs. As soon as I did this, the album artwork showed up again.
You have a few options for how you change the extension. You can right click on every file in your itunes library and select "Show In Finder" to change the file extension, or if you have many songs to fix (I had 793) you can download 'A Better Finder Rename' (search for it at www.versiontracker.com, it costs $20 to change more than 10 files at a time) which will make the changes automatically. If you are cheap you can always set up an automator work-flow to get the job done.
Hope this helps

Subtle Mac Humor in Finder "Cover Flow" View

Has anyone else noticed this?
When I use the "Cover Flow" view mode when looking for other computers on my office network via the Finder, the Macs on the network are displayed as the newest anodized aluminum iMacs.
The PCs are shown as drab beige CRT monitors, with MicroSoft's "Blue Screen of Death" message on the monitors.
Someone at Apple has a wicked sense of humor.
Gotta love it!

It happens... See http://samsoft.org.uk/iTunes/grouping.asp for more.
tt2

View –Cover Flow View-Grey scale images

View –Cover Flow View-Grey scale images
Hi. No problems when I view my album covers in either [List View] or [Album View]. When I use [Cover Flow View] I get distorted lines, less than even a blurred image, in fact grey scale. Seems strange that iTunes can display in [List View] or [Album View], but not in [Cover Flow View]. Any ideas? Thanks.

I don't know the answer to this so a couple of suggestions, are you on the latest version of iTunes that is compatible with Windows 2000?
If not you can download it here:
http://www.apple.com/support/downloads/itunes732forwindows2000.html
Are you upto date with your DirectX for Windows 2000? Although looking at the MS website it doesn't look as though there is anything particularly new:
http://www.microsoft.com/downloads/details.aspx?FamilyID=7c61e5da-8c60-43f6-9549 -65b93cf6f987&DisplayLang=en
Also check your computer manufacturer's support website to make sure you are upto date with your drivers etc.

How to show one album art image for a compilation album in cover flow view?

I just finished getting album art for my entire music collection. Now I go to the Cover Flow view or the Album view and individual songs in compilation albums each have their own album art instead of being grouped together under the same album art. For instance I have a "Buddha Bar" Album with various artists. Instead of having one image for the album, each artist has his or her own image (all the same Buddha Bar album art). So a compilation CD with various artists ends up having 15 images instead of one image in the Album art or Cover Flow view which makes it harder to look through my albums. Does anybody know if it is possible to change this?
Imac PowerPC G5 Mac OS X (10.4.9)

iTunes doesn't have the ability to do what you want, i.e. to define multiple separated values in a field and then have the item show up when looking at a selection based on each of those values. "Bob Dylan", "The Band" and "Bob Dylan & The Band" are three distinct values that can't be linked together. Sort values can change where in a list things are displayed but shouldn't be used to attempt to merge different values as results are undefined and unpredictable.
tt2

Cover flow view problem

I'm having an issue with cover flow view of images in OS 10.6.8
Whenever a jpeg or tiff file is edited in Photoshop (image size not changed) the preview of that picture in cover flow view
becomes smaller, pixelated and it never clears up.
Cover flow displays Raw camera files and unedited jpegs & tiffs correctly, only when an image is edited does it's preview in
cover flow become distorted.
I really like to use cover flow to browse through photos quickly but this issue is bugging me.
I've been on Photoshop forums and they say it's an Apple issue. So I don't know where the problem is.
Any help would be appreciated.

I know this paste below doesn't directly respond to your issue, but the steps below will restore OS X with a new copy and possibily clear up your issue.
There was a recent security update and it's doing very strange things, in your case it will restore a new OS X copy.
Security Update 2012-001 Bricks Rosetta programs
I've outlined the restore proceedure here, it covers a lot of bases and explains what is going to occur so please don't be intimidated it's a LOT easier that it appears.
Take your time and comprehend the steps involved and you'll be backup up like before in short order.
Restore method.
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Try Restoring from a TimeMachine or hold option bootable clone
If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from before the Security Update occured.
Obviously if you didn't make a recent backup before the update, your going to have to skip to Step #3.
Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
If you don't know how to restore from TM drive
http://pondini.org/OSX/Home.html
#3 Reinstall OS X 10.6 from disk
If no recent TM or bootable clone then:
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk and Permissions (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
Note: If Disk Uitlity can't repair the drive, then come back to seek further assistance and make sure you have a copy of your data off the machine.
#4 Update to 10.6.8 without Security Update 2012-001
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#5 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
Note: For most users likley Step #3 and #4 is likley all that is needed to be done.
That's it really.
Further Reading:
Learn how to have a OS X drive restore ability using TimeMachine or cloning software
Learn how to clone your entire OS X boot here
http://www.bombich.com/get_ready_for_lion.html
TimeMachine help here
http://pondini.org/OSX/Home.html
Make copies of your original Snow Leopard
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB thumb drive
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Deciding on upgrading to Lion?
Learn which programs ARE NOT compatible/updated for Lion, Rosetta programs will not run on Lion.
http://roaringapps.com/apps:table
Unverified hacks
Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
If at any time you feel this is beyond your capability, please seek local Mac/PC professional assistance before you lose your data.
In fact my steps above are very simple, you might want to have a family member or friend perfrom the proceedure in about a hour or two.
If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
If your a bit more skilled, a option bootable clone is much superior than TM drive.
Good Luck

Can Cover Flow view be limited to playback of only one album at a time?

Hi all,
I've been using the Cover Flow view in my iTunes Library more and more lately (after years of suffering owning a slow machine). But there has been a question regarding playback that has been slightly nagging me for a little while. I couldn't come up with effective search results, so I'll pose the question to the masses.
Cover Flow playback (by default) seems limited to playing through one album and jumping straight into the next album in the Library without stopping. Scroll through the track listing in the lower screen and you'll notice that iTunes lists every track from every album in your Library.
(picture one of those digital bar jukeboxes and an unlimited bankroll...)
Conversely, when clicking the album's title in the default List view, iTunes will only play the tracks in that particular album's playlist, and stop playback once this is finished. I have grown used to this option when desiring to fall asleep to one particular album only... and not the 476 albums which follow it.
Is there a workaround in place to emulate this "List View" playback behavior for Cover Flow playback?
Just curious... if not, it isn't the end of the world - List View will still continue to serve its specific purpose for my needs.
I just have a thirst for knowledge.
Thanks,
Steve

Hi Jeremy,
Conversely, when clicking the album's title in the default List view, iTunes will only play the tracks in that particular album's playlist, and stop playback once this is finished.
I'm not sure I follow you here — if I click a track in list view, iTunes always goes on to the next track when it's over (assuming Shuffle is off). If that's the next track on an album, great, but when I come to the end of an album it moves on to the next one.
Or are you talking about the Browser? Selecting an album in the Album browser pane will indeed produce the results you're describing, since the rest of your library will be excluded.
Yes that's correct - my apologies, I was at work at the time and was working from memory. I've had the Browser enabled since day one that it almost becomes second nature.
My iTunes interface, while displaying in List mode with the Browser active, limits the upper display fields to only Artist and Album panes.
And exactly as you said, once the album finishes playing, iTunes ceases playback.
Is there a workaround in place to emulate this "List View" playback behavior for Cover Flow playback?
Yes, but it's a bit clunky: use the Search box to narrow down your library until only one album is displayed.
Yes you are correct - it is a bit clunky. But it does work for the most part, provided that the album title is unique from a song title on another album.
Thanks for the info Jeremy!
Steve

Problem w/ cover flow view

To begin I'd like to say I'm not new to message boards and even a forum moderator for the company Streetglow. I've searched for hours trying to figure out my cover flow problem and I just can't get it to organize the way I like. I've had a few problems with itunes in the past but a store rep fixed them within minutes. This is my first big problem.
A few days ago I moved my entire library (I only have music files) to my external HD. The move went flawlessly and itunes even deleted itself in my "My Music" folder. Weird but everything was fine and I checked a song's location and saw that the location lead to my external. This is where the problem starts.
Yesterday, I opened itunes and my entire library is empty. It's as if I just installed itunes on my computer.
So, I re-imported all my files again and went to my cover flow view and I have multiple album art covers for each song. But, if I go to the grid view, its exactly how I want it. Artist....Album...in ascending order. But if I switch to cover flow, I have close to 500 album art covers.
Prior to this, every time I imported a CD, I filled out the info entirely. Kept the artist, and album artist the same. Cover flow view was perfect before this incident.
Now, I have to use the grid view because it's the way I'd like but I would like to use the cover flow.
Any ideas?

The albums will only stay grouped together when sort as *Album, Album by Artist* or *Album by Year*. Sort on Track title or Track No. and the order of covers will be pretty random. Sorting as Album by Artist groups all albums by the same alphbetically which tends to work for most people. What cues are your browsing for? Artwork, Album title, Artist, Track Name. You can use the search box to type in part of a track name if you're trying to find something specific. If you're just flicking through for something to take your fancy you might find grid mode more useful.
tt2

Jpeg Icons Instead of Images in Cover Flow

First time poster, not sure if this is the right place. Anyway...
For the past few days, when I'm opening folders of images, in Cover Flow mode, instead of seeing the images, all I see is the jpeg icon.
Q1: Did I do something to cause the change?
Q2: How do I restore it?
Thank you, in advance, for any advice!
Don

Welcome to Apple forums, Don.
Q1 No, I doubt yopu did anything.
Q2 Go to Users/yourname/Library/Preferences and trash these two files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart.
(You will have to reset a few finder prefs the way you like them.)
Let us know if that helps.
-mj

Thumbnails in cover flow view are blurry

For some reason my main user account refuses to refresh its thumbnails in the Finder's Cover Flow view. The same file views fine in my Test user account. Merely copying/moving the file to a different folder or burning it the file directly to a cd does not remedy the problem.
However, the same file views fine if I burn it to a CD using iPhoto and then re-import it.
A similar problem began for me in iPhoto around the same time I got my new Aluminum iMac 24". I don't remember exactly when though. My iPhoto thumbnails started switching at their own will. A photo would get represented by an incorrect thumbnail. However, if I resized the thumbnail to a larger size it would snap to the correct thumbnail. I have several thousand photos in iPhoto and on my computer, so I was used to viewing thumbnails at the smaller magnifications. I feel that enlarging the the thumbnails to a larger magnification forces my iPhoto to create a new thumbnail.
Apple Tech Support on numerous occasions has run me through the full painful protocol of troubleshooting - up to being referred to a product specialist who finally concedes that I need to purge all of my images and just reimport and reorganize EVERYTHING.
THERE MUST BE a file/folder somewhere on my Mac holding a cache of these thumbnails that just refuses to refresh itself. PLEASE SHOW MERCY APPLE and MR. JOBS, please tell me where I can find the folder that needs to be refreshed.

Off and on I have the same problem with not seeing the image thumbnails in cover flow.
When this happens, I force quit the finder (commandoptionesc) and then I see the thumbnails.
Don't have a clue why this method works but it does for me!

Finder crashing when in Cover Flow view

I installed Leopard a few days ago and have noticed that whenever Finder is on Cover Flow view, it crashes and restarts. This happens at least 50% of the time but only in this view mode. In the other 3 view modes, it is stable.
Has anyone else experienced this?

I have noticed that many JPG files do not show preview icons or coverflow views on my system (many do, many don't 50-50?). I tried launching a JPG file and Preview launched, but no file, then Finder crashed (desktop and all) and reloaded. I repeated this several times with different JPG files. Same thing with Quick View (caused a crash).
The other issue I've had is with the photo screen savers. They play through once then quit, or don't work at all. I can no longer use my picture catalog for a screen saver with Leopard.
I've just rebuilt my Spotlight index... maybe that will help?
Jon.

Issues with finder going out of sync with file images in cover flow.

Hi All,
I'm having issues with files going out of sync with images in cover flow since updating to Mavericks. Typically, if I had for example 10 pictures listed as 1 to 10, if i deleted images 6&7 the images remain in coverflow but the file listings are removed, then if i click on image 7 the file listing of image 8 is highlighted, then to make matters worse, if i click on the file listing for image 9 in shows image 8 in cover flow. To stop this I have to shut down finder and restart it, then the whole thing repeats itself if i delete more images. Its a nightmare when your working with 50 plus images at a time!!! Help!!
Thanks all.

com.apple.systemuiserver.plist and com.apple.finder.plist
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/. Move the .plists to your desktop.
Re-launch Finder by loggin out/in and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.
If you look at the 'More Like This' box (top right) it seems the Cover Flow view is having problems.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

No Thumbnails in Cover Flow View

I used to be able to view all image files at the top of the windo in cover flow view. Now, instead of showing me the image, it shows me icons. Like .jpg's show up as a preview icon. I want to see the image itself so I don't have to open every file. Isn't this the point of cover flow? Help! Thanks.

Off and on I have the same problem with not seeing the image thumbnails in cover flow.
When this happens, I force quit the finder (commandoptionesc) and then I see the thumbnails.
Don't have a clue why this method works but it does for me!

Transparent images in cover flow view mode

Similar Messages

Maybe you are looking for