Transparent outline problem

Hi!
I just switched from old CS2 to CC and I have a problem I can't solve or find a solution.
There's a transparent outline around every image that I make in my Photoshop. It's just 1 px thin and not fully transparent, look at the screenshot please. Is it a bug or bad settings?
Lukas

As I understand you right, you want to use a top layered image with transparent parts. If this is the case, you should use the same color for all transparent parts in the picture and use a paint program to change the transparent color to the color mentioned. I use always microsoft paint to do this. (picture-attributes-transparent...)
the colored parts will automatically appear transparent.

Similar Messages

Live Bookmark drop down sometimes appears as a blank transparent outline.

Sometimes when clicking on a Live Bookmark, a transparent outline drops down instead of the normal stories. I've included a link to a picture of the problem. This happens about 50% of the time when clicking on the Live Bookmark. My only work around is to keep clicking the LIve Bookmark until it shows up normal again. I recently downloaded Aurora to see if that would fix the issue, but it did not. Before I was using the beta version of 19.
http://i246.photobucket.com/albums/gg98/jesseskogh/brokenlivefeed_zpsddc3acd0.jpg

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

InDesign Transparency Effects - Problems with Image Quality and File Size

Hello,
We are experiencing new problems exporting InDesign files to PDF.
To summarize, though our largest workflow is to create files for offset printing, we also deliver our work to PDF for mounting on a website so our clients can download directly from the web. Our new problem is Transparency Effects, and creating a PDF that will both have a high quality (or resolution), and be a small file size.
We are working with multiple page documents (24 to 48 pages), and would very much like to work with InDesign Transparency Effects. However, after spending much time testing a variety of PDF types, we are finding there is a radical difference between quality and file size. I was curious if anyone has had these problems, and if there is a simple answer. InDesign is an incredible program that allows us to design on the fly with Transparency Effects, but, if we are going to experience these problems, we will have to eliminate these wonderful tools.
Can you help me or lead me to information online that will help.
Thank you,
Lain

Please don't post in multiple forums. Your question has nothing to do with the PDF language and specifications, but rather PDF workflow or InDesign. I've responded to your other posting and am closing this thread.
- Dov

PS 2014 Foreground to transparent (gradient problems)

Adobe Photoshop 2014
Files:
PSD                                Clock, Gradient line
DOCX, MHTML, PDF                   PS Foreground to transparent gradient
SWF                                2014-06-26_1509
PNG                                Clock (original), Clock (gradient), Clock (masked), PS 1, PS 2, PS 3
Foreground to transparent gradient
Foreground to Transparent will not work by simply clicking 'OK' and dragging mouse across a selected layer. This gradient tool is hyper sensitive, and unstable.
We tried to record the PS method for our gradient. Jing was our first choice, but Jing’s flash engine conflicts with the PS flash engine, blocking the gradient tool’s drag action. Jing can only record steps prior to the final drag-and-drop gradient action. Cam is rendered useless by HDR displays’ high resolution, causing glare white-out. Here is our visible work-flow.
>>
1. Select Gradient Tool on left toolbar, open tool group and select 'Foreground to transparent' tool.
Occasionally, next close and reopen PS 2014 (stubborn gradient problems).
>
When PS 2014 reopens, the specific gradient tool remains selected. This clears some aspects of the PS 2014 cache, which sometimes help.
Notice that selected left tool bar button momentarily changes to Eyedropper, when Gradient Editor opens! A hint of what follows.
2. Select a layer to apply gradient to, this selected layer is the gradient tool's "Foreground". However, gradient is applied in ‘reverse’ (see below, 5).
3. Panels bottom bar, click mask button to 'Add a layer mask', then ‘Filter for pixel layers’ and ‘Add a vector mask' -

This may also help!
                Using only Add layer mask may indiscriminately result the following:
- Stressing here the words "may indiscriminately"...
when PS 2014 is unstable, adding actions when Layer mask alone fails, may (often) be stabilizing enough to make gradient work...
once PS 2014 begins performing Foreground to transparent gradients, then simply begin creating new transparency gradients when PS 2014 re-opens,
or just click Add layer mask to get going again;
- Layer mask alone may suffice, or it may slightly penetrate underlying layers with partial transparency, and/or…
- May convert transparent background to a foreground 'Color to transparent' gradient in opposite direction to (reversed) Foreground to transparent gradient;
- Exact/intended layer vs. vector behaviors are unknown, though each provides unique creative applications, in isolation and when used together;
- Use a new PSD file dedicated just to Foreground to transparent gradient. This quickly resolves inevitable multiple layer-and-tool conflicts.
4. Layers panel top bars, click ‘Lock transparent pixels’ and then click 'Filter for pixel layers'. These actions help focus PS 2014 on the current work-flow. Though given this gradient’s obvious corruption, it cannot be said that any method is specific, or repeatable. We are now stepping beyond the sometimes sufficient Add layer mask, experimenting with gradient line attempts as we go.
5. Finally, we will drag from point A to point B in workspace, resulting gradient with greatest transparency at A-side of selected layer. Click workspace anywhere and drag across selected layer: this creates a straight, dashed gradient line. When the mouse button is released at point B, the dashed line vanishes and the gradient is applied. Release mouse button where you want gradient to end. Note that the endpoint B inside of layer object will fade into opaque towards point B, right up to the B-side edge of the layer object. PS 2014 auto-renders an even gradient. Extending beyond object renders opacity curve with midpoint transparency closer to full opacity B-side of gradient line. This gradient tool, in its current structure, performs in reverse and should be renamed to Transparent to foreground: starting Point A is the transparent side of the gradient line!
6. Ctrl-Z or history to undo Foreground to transparent gradient (s). Experiment until it looks best. Multiple gradients can be applied from any direction. Occasionally, once PS 2014 has established effective (reversed) Foreground to transparent gradient behavior or behaviors (?... not sure what's going on there), then closing and reopening PS 2014, one can immediately begin to create new (reversed) Foreground to transparent gradients... without any masking or other workspace preparation!
Office 365 32-bit and PS 2014 64-bit conflict. When image pasted from PS into Word 365, Office pastes image as ‘Object’. Pasted object is distorted as square dimensions are vertically stretched 150% to offset square dimensions – e.g., 2px x 4px PS 2014 copied image layer becomes 2px x 6px Word image “Object”. Also, pasted objects cannot be formatted in any way. Re-sizing is not possible! This dimension distortion and formatting conflict does not arise in Office 64-bit; however, Microsoft will discourage (even withdraw support) as the bulk of corporate clients deploy Office as 32-bit software. PS 2014 is set to Maximize Compatibility.
- - Riverleaf digital publishing, summer 2014

Linking to HTTP / Spry problem / Outline problem

Three questions:
1. I have DIV Tags with JPEGs in them and am trying to link them to existing pages (Facebook and the like.) Every time I get the cursor in the DIV Tag and click HTML in the Properties panel, I try to type the link into the "Link" flyout menu. However, when I click again ANYWHERE (mostly not even on the design page, but right outside the flyout menu) everything I just typed disappears. Am I missing something?
2. I designed for a vertical spry navigation bar. I wanted spacing between the buttons, so I put a 13px margin as a property in ul.MenuBarVertical a. After this, the space between my buttons has turned white, but only in a browser (not even in live view.) Is there a color property I need to add and manipulate to make it not have any color, but just show what's behind the whole spry menu?
3. This is probably my most crucial problem. Every single DIV tag that I put on my page (including my spry menu) has this annoying white boxy outline around it!!! It makes my webpage look insanely unprofessional. I do not want any outline, but for the background to just show behind any items I put on the page. This does not happen, however, with any DIV Tags that only have text in them, just my spry and any other tags that have backgrounds or JPEGs. HELP!!!
-Kaschak

You need to choose the image.
It has no effect on my menubar at all
If I were you I would patent the effect, I cannot replicate it
I all earnest, please post a link to your site so that we can help you in an appropriate manner.
Gramps

Simple vector transparency - printing problems

Morning everybody,
I'm having problems printing a PDF which has been generated from Indesign CS3. The problem also arises when printing directly from Indesign. Everything appears OK when on screen.
I have a background colour, in front of which i have placed an Illustrator CS3 file which is a row of white squares with gaps (transparent) between then. The squares are white, but I really want them to fade from a hue of the background colour to fully transparent. To achieve this I have used a gradient feather, going from opacity 50% to opacity 0%. [See sceenshot]
My problem is that all the squares show up when I print the file, even the ones which should have an opacity level of 0%. On the printout the gradient feather is visible (i.e. the squares 'fade out'), but they do not compeltely fade out to fully transparent.
Does anyone have any tips?
Thanks very much for any help with this.
Robin

Thanks a lot for your reply.
I don't have a brilliant understanding of colour, but I believe that all the colours in the document are process [see screenshot].
Turning on overprint preview doesn't change the appearance of the document. Nor does turning on simulate overprint in acrobat. In both cases, the appearance of the document on screen is how i want it to print.

Transparent Canvas problem

Any one know hov i can create a compleatly transparent Canvas?
Please give me some code :)

Thanks!!!
I found that JComponent har a setOpaque(boolean) metod that is very handy. I also found that i could add this component to a JFrame using setGlassPane(component)...Problem sort of fixed

Transparent image problem

Hi all,
I have two images of the world, both of exactly the same size. The first is a background, and provides texture. The second image goes on top and is supposed to be transparent to let the texture show through. My problem is that when i display the 'transparent' image on top, you cannot see the contours through it, instead the top image just appears a pale colour because of the transparency added to it, as opposed to actually being transparent. Here is my code:
import java.awt.*;
import java.awt.image.*;
import java.io.*;
import javax.imageio.*;
public class GamePane extends Canvas {
    /** Creates a new instance of GamePane */
    public GamePane() {
        try {
            buff1 = ImageIO.read(getClass().getResource("images/map_background.gif"));
            buff2 = ImageIO.read(getClass().getResource("images/map.gif"));
        catch (IOException ioe) {
            System.out.println("Problem reading in file: " + ioe);
    public void paint(Graphics g) {
        g.drawImage(buff1, 0, 0, null);
        g.drawImage(buff2, 0, 0, null); //the transparent image
    Image img;
    BufferedImage buff1;
    BufferedImage buff2;
}Can anyone suggest where i am going wrong?
Many thanks

As I understand you right, you want to use a top layered image with transparent parts. If this is the case, you should use the same color for all transparent parts in the picture and use a paint program to change the transparent color to the color mentioned. I use always microsoft paint to do this. (picture-attributes-transparent...)
the colored parts will automatically appear transparent.

ASO to BSO Transparent Partition problem

Hi,
I am doing a partition from ASO(Source) to BSO(Target). Outlines are same except one dimension:
Aso cube
dimension has 10 Level 0 members in Level 1.
BSO cube
Same dimension has 2 level 0 members(these 2 members are same as in ASo) in Level 1.
Do rest 8 members be available while retrieving data in BSo cube? [Right now when i connect can only see 2 members]
Was wondering with Transparent partition is it possible to see the additional outline members in BS ?.
Any help to clarify would help thanks.

I think i am understanding your question.
A user will only "see" what members/dimensions are in the Target cube. You would need to add the other 8 members to the target outline to be able to pull the data for them from the source cube.

[SOLVED] xorg7 transparency (xshape) problems

After the upgrade to xorg7 (w00t!) I have issues with the "fake transparency" that window managers use with xshape.
Here's an example: http://img327.imageshack.us/img327/4797/badtrans7jc.jpg
This happens not only with the window manager, but with anything that uses xshapes to provide transparency...
EDIT:
Added
Load "extmod"
to my Modules section, problem solved. Thanks phrakture!

I have the same problem ( nv-legacy, riva tnt2 and xorg 7)
(EE) Failed to load module "glx" (module does not exist, 0)
nvidia-legacy package is installing glx libs not where it should?
EDIT:
tpowa released a new release of nvidia-legacy, now works fine, thx to him

E63 black outline problem

Hi guys,
I have a rather strange problem which is aesthetic rather than technical. The black contour/outline surrounding the actual screen is fading away in the right side of the screen. Well, not really fading away as it doesn't disappear but more like, instead of being straight it;s become curved. What could be the problem and how could I fix it? Could it be that water got there or something like this?
Cheers!
Maia

i also having same problem. please do something. when i have visited nokia care center ,they replied it is manufacturing outline but anothor nokia e63 doesn't have this type of problem when i checked anothor e63. i have bought before 6 months.

Transparent subvi problem

I'm trying to run a subvi transparent window above the main VI. It seemed to work fine just configuring this subvi to run transparently (under "Customize window appearance"). However if I click on the Windows toolbar (at the bottom of the screen) before the execution of the subvi, it appears for a short while (less than one second).
I'm using Labview 8.2.
I would appreciate any help to solve this problem.

I have seen this behavior in the past. For example, say you have a graph in a subVI and you would like to export its image. The graph will not update unless the FP is open, so I usually open the FP with the VI set to run transparently. I recall that this was not a clean solution, you see the subVI in the taskbar and I remember some flashing. I usually set the FP position to some corner of the screen and it seems fine. In this case, trying to cover one VI with another, that could be an issue.
All of that said, if you are simply looking to block mouse clicks I suggest using an Event Structure to filter the Mouse Down events. See the following example. Run it and try to change the value of the button inside the box.
Attachments:
StopMouseClicks.vi ‏17 KB
PointInRect.vi ‏11 KB

Transparent Table (Problem in data fetching)

There is a new bapi developed in our sap environment which is fetching data from pool tables and transparent tables.
When this bapi is called from non sap environment then only pool tables are returning data .Transparent tables are returning blank values.
Case
When we are passing hard coded values in "Where Clause" of transparent tables like A931 table ,then transparent tables are also returning data from bapi in non sap environment.
But when we pass values in "Where Clause " of transparent tables through Variables declared in bapi then transparent tables are not returning any value (instead returns Blank) in non sap environment.
Help

Don't blame it on the transparent tables, I'm quite sure that something is wrong with your selection statement, e.g. how you pass "variables" in the WHERE-condition. Give more information on a selection that doesn't work as expected.
Thomas

Textarea ... background-color:transparent causing problem in IE7

hello;
when I use <textarea style="background-color:transparent " > IE7 does not accept input ... other browsers work fine;
is there a way to get a transparent background for a textarea such that the textarea functions correctly in IE7 ( I haven't tested it in IE8 )?
thanks,
Shannon

What happens if you remove the background tag altogether?
I do this with my overflow css for text boxes and it leaves them transparent (as in: showing the page background) in Firefox, Safari Opera and IE 5, 6, 7 and 8.

IE border / outline problem.

I'm having a spot of bother with a Flash site I've done for a
client. It should be white with a white background, but on Windows
+ IE the flash part gets a border around it, as though windows
thinks it's a big button. A caption also pops up saying 'press
space or click to activate this control'.
The client doesn't want to see the outline/border
I only work on macs, so I'm clueless when it comes to PCs. My
questions are, is this an automatic setting in IE? Can I disable it
through flash?
Anyone get any advice?
image here
http://img91.imageshack.us/img91/2134/trnbc6.jpg
Cheers for any help.

ha - no offense but at this point, it's actually getting
kinda funny - search - that's all i can say
is search - this forum, this site, google - anywhere - it has
been the most asked question on this
forum for months - been asked at least once everyday this
week - search for "active content" -
almost everybody here ignores this question because they are
tired of replying to it :)
good luck.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Bob_Manchster wrote:
> I'm having a spot of bother with a Flash site I've done
for a client. It should
> be white with a white background, but on Windows + IE
the flash part gets a
> border around it, as though windows thinks it's a big
button. A caption also
> pops up saying 'press space or click to activate this
control'.
>
> The client doesn't want to see the outline/border
>
> I only work on macs, so I'm clueless when it comes to
PCs. My questions are,
> is this an automatic setting in IE? Can I disable it
through flash?
>
> Anyone get any advice?
>
> image here
http://img91.imageshack.us/img91/2134/trnbc6.jpg
>
> Cheers for any help.
>

Transparent outline problem

Similar Messages

Maybe you are looking for