Transparent Partion with three sources and one target- Need quick response

I am creating transparent partion with three sources and one target.What will be the impact of this on retrieval and how can I improve retrieval.
Thanks,

transparent partion
1:network load will be heavy
2:transparent partion allows user to manipulate or edit or delete at will ,from the user to target
and also from target u can update it back to respective databases
3: disk usage will be high
[email protected]

Similar Messages

Support for PostgreSQL as a source and/or target in DS XI3.2 SP2

Hi,
I've noticed that PostgreSQL is not mentionned in the supported database connectivity for Data Services XI 3.2 SP2 (Windows), but it is also stated that "3rd Party ODBC Level 2-compliant Drivers may potentially have issues as not all combinations have been tested yet, but are supported as a general rule."
Does it means that we could use PostgreSQL (v8.0 or v8.4) as a source and/or target with PostgreSQL ODBC connectors ?
Thanks,
Olivier

Hi Fabrice,
I may not have been clear enough, but when I said in my first post that "PostgreSQL is not mentionned in the supported database connectivity for Data Services XI 3.2 SP2 (Windows)", it meant that I've already read the PAR for Data Services XI 3.2 SP2.
I'm looking for precisions and advices about ODBC to generic data sources, where this document says that ODBC level 2-compliant drivers, although not fully tested, are supported as a general rule.
I wonder if it applies to PostgreSQL ODBC or Datadirect ODBC drivers for PostgreSQL.
Regards,
Olivier

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up und one account.

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.

You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

TS4009 I seem to have 2 iCloud accounts with different names - a free storage that came with my Macbook and one I used when I bought some iCloud space. How can I cancel the free account?

I seem to have 2 iCloud accounts with different names - a free storage that came with my MacBook and one I used when I bought some iCloud space. How can I cancel the free account? Because of this I can't access iMatch and the ICloud account I paid for on my MacBook
Any ideas cos its frustrating that I can't access something I paid for!

Sign out of the account you do not wish to use, sign into the one that you do wish to use.

How can I make two copies of the same picture one with my watermark and one without for printing for clients?

how can I make two copies of the same picture one with my watermark and one without for printing for clients?

Export the photo twice, once with a watermark and once without a watermark.

How do I create an unordered list with three items and link to id's

How do I create an ordered list with three items and linl to id's on my page

Thanks, I guess what I was really asking, Is there a n option in the insert menu or somewhere where Dreamweaver does it for you.
I am not clear on what you are wanting DW to do for you? Is it that you want it to insert a three item unordered list? No - there's no such function. You would need to click in Design view where you want the list to go, click on the bulleted list icon on the Property inspector, and then enter the three items separated by carriage returns. Then you'd have to link each item specifically.
To enter the named anchors to element ID values, CS5 has no way to do this. You'd have to enter those links manually.

Motion how to create 3d effect with a background and one primary object

motion how to create 3d effect with a background and one primary object

… like that?
http://youtu.be/yOht1GJpEm4

SAP System copy without shutting down the source and the target system

Hi,
We need to need to System refresh without shutting down both the source and the target system, i read the docs from SAP looks like we need to shutdown the source system during export and import phase, is there any way to do the system refresh without shutting down the system.
Sathish

Hi,
Think a little bit about what is a database and you'll get the answer that what you "need to need" is impossible.
Of course it is possible to keep the source running (hopefully, because ususally it is the production system !) by using an online backup, but you need to stop the target system because you will restore a backup on it.
If you use the export/import way, you have to stop both source and target system.
Regards,
Olivier

Hello, we have both Creative Cloud and Creative Cloud for teams. Can you help me with the difference and if i need to have both?

Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
Thank you

Please refer to Creative Cloud Help | Creative Cloud / Common Questions
CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
Regards
Rajshree

Multiple source and single target

Hi,
I have 3 users in informatica and i wanted to find out tablespace size in gb and mb
SELECT
     '$$TABLESPACE_NAME',
     SYSDATE,
SUM(BYTES) / 1024 / 1024 / 1024 size_in_gb,
     SUM(BYTES) / 1024 / 1024 size_in_mb
FROM user_segments
WHERE tablespace_name like '%$$TABLESPACE_NAME%'
i confugred this wf and it has 3 session task and each session task confugured with one user but in wf connection details i can able to add only 1 parameter i.e. dbconnection_oltlp and dbconnecion_olap
so what is happening it is reading size for one user only i.e. for dbconnection_oltlp and dbconnecion_olap.what about remaining users.i.e. remaining session task is getting failed
i.e. dbConneciton_olap2
thanks
Chinu

Hi
I have 3 different session task in one workflow and each of them have different source now i want the parameters should generate automatically in paramaeters tab of DAC
because when i am adding above query in informatica it is reading only one connection which confugured in task i.e. is not reading remaing 2 sources
i.e. dbconnection_oltp and dbconnection_olap---session--1--reading it because confugred in task confugrtion of DAC)
dbconnection_oltp1 and dbconnection_olap1---session-2(different source and target-not hitting to this connection)
etc
thanks
chinu
Edited by: Chinu on Aug 4, 2011 9:05 PM
Edited by: Chinu on Aug 4, 2011 9:08 PM

Can you drag several sources to one target?

Hi,
I am using Captivate 8 and I have a drag and drop set up. Can you drag several sources (correct answers) into one target? Or does each source have to have its own target?
Thanks,
Kristen

Yes, you can. Check out the demos here by Dr.Pooja Jaisingh.
Adobe Captivate Help | Drag-and-drop interaction
Sreekanth

Installation with multiple as and one DB (no cluster)

Hi, I'm trying to setup a production environment with three Jboss AS non-clustered and one MSSQL database. I've made the installation on each AS and for each AS I've executed all the steps of the Configuration Manager.
Now I have some problems about the three AS line up; when I modify an user password on one AS the other don't see this modification. Moreover, some common features works such as the policy definition; for example, when I create a policy on the first AS the others can see this policy.
Can you help me?
Thanks
Fabio

Multiple, non-clustered LiveCycle instances against a single database is neither tested, nor supported. For each instance, you'd need a separate database (with multiple sets of tables, views and sequences). All changes have to be repeated for every instance you have.
This technical whitepaper from Adobe will provide more details:
http://www.adobe.com/devnet/livecycle/pdfs/lc_platchoice_wp_ue.pdf
What you are attempting is a deployment architecture the author of this whitepaper calls "Server Load Balancing" (see page 11).
You might be better off clustering the three instances.

Multiple Iphones with separate apps and one computer

I've researched this and can not find any help on either the apple site, internet and not really in here clearly.
We have multiple iphones each with their own apps and information and one computer. My husband doesn't want my apps installed on his iphone and I don't want his either.
How can we sync and update our phones using one computer and back them up without overwritting each phone with the others apps. Especially if a restore needs to be done, itunes holds one phones set of apps.

Because the iPhone does not support disk mode as with most iPods, which is probably for security reasons which isn't a concern with an iPod.
I'm concerned what will happen when I get a new PC.
No reason to be concerned. You need to transfer your iTunes library from your old PC to your new PC - the iTunes named folder located in your Music folder and with iTunes quit on the new PC, place the iTunes folder in the Music folder. You also need to authorize your new PC with your iTunes account with iTunes.
When getting a new computer, you transfer your iTunes library and content along with all other important data that you will need or want to access on your new computer such as photos, documents, etc.

IMessage trouble with two iPhones and one Apple ID

Hi,
I'm having trouble with iMessage after updating both of my iPhones to iOS 6 and not being able to use iMessage with one of the phones.
Some background:
-I have two iPhones, one on AT&T in the U.S., and one on NTT DoCoMo in Japan, both with separate phone numbers, using the same Apple ID.
-The AT&T iPhone is a 4, the NTT is an unlocked 4S.
On my 4 (AT&T), on iMessage, I have the option to send/receive as my U.S. phone number and my Apple ID. Works just like before updating.
On my 4S (NTT), on iMessage, before I updated, I was able to send/receive using my Japanese number and Apple ID. After updating, I have the option to send/receive using my U.S. number and Apple ID. My Japanese number is greyed out and I cannot select it. When I turn on iMessage, it says "Waiting for activation..." and does not do anything. Turning iMessage off and on, some times I get an error message staying that activation cannot be completed.
I have rebooted the phone multiple times, turned on/off iMessage and FaceTime, turned the Set Date & Time Automatically option on/off, and reset Network settings several times. Nothing works; iMessage will not activate on my NTT 4S. Please help!

Finally resolved this issue after months of off and on troubleshooting.
I have no idea exactly which steps "fixed" the issue, but here's what I did. None of the basic troubleshooting steps that are on here worked for me, and this is including restoring both phones in iTunes as a "last resort" step that two Apple technical service representatives suggested.
I found a post on here from user "tungddao" who suggested:
"Turn on iMessage then make a phone call to : 011+445773142076
With Facetime & Siri: 011+447786205094"
I called both numbers with my NTT 4S, and both numbers hung up right away. I also texted both numbers, and the FaceTime one went through, while the iMessage number did not. I then checked my SMS blocking settings with NTT. There were no blocks, but I reset the settings to "unblock all" anyway.
I was able to activate iMessage and FaceTime with my Apple ID and my NTT phone number. Halfway there.
I then turned on my ATT 4, and while I could send/receive using my Apple ID and NTT phone number, the ATT number was greyed out, which was the opposite of what had happened before, when I could use the ATT number, but not the NTT one. On my NTT 4S, I could select my ATT number, but it was stuck on "verifying" for days, and I knew it wouldn't go through.
So, I signed out of my Apple ID on iMessage and FaceTime on my ATT 4, and turned both services off. I turned on data roaming, and turned off WiFi. *This step was key to activating both services, as they would not activate over WiFi for some reason.
I turned on iMessage and FaceTime without signing in to my Apple ID just yet. They both activated successfully, and then I signed into my Apple ID on both services, and from then on, I can use both numbers and my Apple ID on both phones! Finally!
These are my current options:
Phone 1 (4S on NTT): Phone 1's #, Phone 2's #, Apple ID
Phone 2 (4 on ATT, roaming here in Japan on Softbank): Phone 2's #, Phone 1's #, Apple ID
Hope this helps someone out there, as this issue was real frustrating for me.

Help to read a table with data source and convert time stamp

Hi Gurus,
I have a req and need to write a ABAP prog. As soon as i excute ABAP program it should ask me enter a data source name, then my ABAP prog has excute teh code, in ABAP code i have to read a table with this data source as key, sort time stamp from table and should display the data source and time stamp as output.
As follows:
Enter Data Source Name:
Then user enters : 2lis_11_vahdr
Then out put should be "Data source :" 10-15-2008.
The time stamp format in table is 20,050,126,031,520 (YYYYMMDDhhmmss). I have to display as 05-26-2005. Any help would be apprciated.
Thanks,
Ram

Hi Jayanthi Babu Peruri,
I tried to extract YEAR, MONTH, DAY separately and using
EDIT MASK written it.
Definitely there will be some STANDARD CONVERSION ROUTINE will be there. But no idea about it.
DATA : V_TS      TYPE TIMESTAMP,
       V_TS_T    TYPE CHAR16,
       V_YYYY    TYPE CHAR04,
       V_MM      TYPE CHAR02,
       V_DD      TYPE CHAR02.
START-OF-SELECTION.
GET TIME STAMP FIELD V_TS.
V_TS_T = V_TS.
CONDENSE V_TS_T.
V_YYYY = V_TS_T.
V_MM   = V_TS_T+4(2).
V_DD   = V_TS_T+6(2).
V_TS_T(2) = V_MM.
V_TS_T+2(2) = V_DD.
V_TS_T+4(4) = V_YYYY.
SKIP 10.
WRITE : /10 V_TS," USING EDIT MASK '____-__-________'.
          /10 V_YYYY,
          /10 V_MM,
          /10 V_DD,
          /10 V_TS_T USING EDIT MASK '__-__-__________'.
If you want DATE alone, just declare the length of V_TS_T as 10.
Regards,
R.Nagarajan.
We can -

Transparent Partion with three sources and one target- Need quick response

Similar Messages

Maybe you are looking for