Transport a char. from dev to prod

hi all,
i need to add a char. to a cube which has data, so i know i first need to delete the data in the cube and add the char.
when i transport that to qa, if the cube in qa has data, do i need to delete the data in the cube in qa, before transporting the char.?
thanks in advance

Hi BSK,
No need to delete data for adding a characteristic to a cube. You can just add the characteristic and send it to QA. No problem.
Hope it helps.
Thanks,
Soumya

Similar Messages

Transporting standard table from DEV to PROD

Hi All,
I have updated a table called T166K and T166P for Purchase Order Printouts.
I have entered few values in the above mentioned tables in DEV server.
Now, i would like to move these tables to Production, since i can not create values to these tables in Production server.
How to move tables from DEV till PROD...??
NOTE: While updating these tables, system didnt prompt for saving under Transport Request Numbers in DEV server.
Regards
Pavan

Hi,
You can use scatt tool to upload the data in the developement server. Prepare a file with data. Do it in developement environment only. then in SCATT you have remote logon facility using which you can run the scatt in developement environment and the result will be placed in the production server.
Let me know if you what more information on this.
Pls reward points if helpful
rgds,
Harikrishna

Transporting SLD objects from DEV to PROD

Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.

Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

Transporting a workflow from DEV to Prod

Hi all expert,
thanks for your help in solving my issue .. that was awesome guys. Now I stuck with transporting the workflow that i have made from development system to production system. I have tried using regular transport request, and the workflow number exist but no active version available. So I cannot using it. Any suggestion on something that might have been forgotten?
thank you in advance for your help
regards,
david

Hi David,
I hope you configured the SWU3 in Production as well.
Then in Production check the syntax error in your workflow template using CTRL+F2.
During the transports, sometimes some containers may missing.
If there is no syntax error, then in Development create new version and activate the workflow again and do the transport again.
Before transport, do a buffer sync using transaction SWU_OBUF.
Thanks,
Viji.

Best method to transport changes from DEV to Prod Environment

Hi SDNers,
I have a requirement here :
I have made some changes to the DEV environment, which i want to move to the production Environment.
Changes mainly include the Structural changes, XSD's, Import maps, Remote systems, Export Maps, Validations etc. Please note that I DO NOT WANT to transport the data from DEV to Prod environment.
I can see 2 options available :
1. Export/Import Repository schema - But as far as i know, the import and export maps will not be transported auomatically through Export/Import Schema.
2. Archive/Unarchiving Without data -
Here are my questions :
1. Is the 2nd option feasible looking at the changes I need to transport? If yes, is there any recommended guide available by SAP suggesting the 2nd option for trnasport mechanism.( Please sendme the links)
2. Will it affect the data in Prodcution in any chance?
3. Is there anything Archiving/Unarchiving without data cannot handle.
4. Will it impact any other normal running of Production environment.
Please respond to my queries.
Thanks and Regards
Nitin Jain

Hi Nitin,
If you use Archive/UnArchive option without data then you cannot persists the PROD env since you need to UnArchive the entire repository which is empty and then you need to move the PROD data into this repository.
1. Is the 2nd option feasible looking at the changes I need to transport? If yes, is there any recommended guide available by SAP suggesting the 2nd option for trnasport mechanism.( Please sendme the links)
Ans. I don't think, 2nd option is feasible as a mentioned earlier. This option should be used when we need the entire repository without data which is not the case you are looking for.
2. Will it affect the data in Prodcution in any chance?
Ans. If you are using 2nd option then this question is not related because when you UnArchive, you will get the new repository so this wont affect the existing repository at all.
3. Is there anything Archiving/Unarchiving without data cannot handle.
Ans. Workflows
4. Will it impact any other normal running of Production environment.
Ans. If you are using 1st option then you need to unload the PROD repository first and then import the changes. For option 2 its not related.
Regards,
Jitesh Talreja

Problems when transporting from DEV to PROD

Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon Sulvaran

The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail

Transport from DEV to PROD BPC 7.5

Hi
i had a question of transporting AppSets from DEV to PROD System.
On the PROD Systems are no AppSets the PROD System is completly new.
Is it possible to transport the AppSets directly from the DEV to the PROD or must we first make a Backup in the DEV and an Restore in the PROD.
Thank you for your help.

Hi Carsten,
As far as i understand you need to transport application sets individually, from development to production. The object type ASET and APPM refer to an application set and application respectively.
As mentioned above, you can check and confirm from SAP Support if the back up mode ia now available to users.
Hope this helps.
Regards,
Poonam

Transport SLDm repository, directory objects from Dev to Prod

Hi Forum,
I heve a development XI system and a production XI system,
and seperate SLD for each of them,
In development SLD i have created,
1 business system (third party)
1 product and software component
in Repository of Development XI,
i have a file to file scenario,
in directory of Development XI,
i have configured the scenario,
Now i want to transport everything (as explained above) from Development to Production XI system ....including SLD things ...
please tell me the procedure and sequence
Edited by: rana brata de on Jan 18, 2008 9:16 AM

Hi,
Check the links below for transporting the Objects from DEV to PRD.
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Regards,
Phani
Reward points if helpful

Error while importing request from DEV to PROD

Dear Experts,
                  i am having the problems with request no.. There are two transport request nos and these have to be transported
                 from DEV to PROD. I relesed these two but while importing into PROD showing everthing completed successfully
                  with one error and error is Generation or programs and screens for both transport requests .
                  I am just enable to understand what this message is for ..
                   Please someone help me out in this....
with regards.
Praveen.
Moderator message: please search for available information/documentation before asking, read the detailed transport logs, correct the errors, try again.
Edited by: Thomas Zloch on Dec 13, 2010 6:05 PM

Hi,
First check the source system: ZSTGLDV110 is exists or not. check the rfc connections (Also check the source system assignment in both the system to each other). check the settings in the stms tcode. check the suppoet pack on your quality system,.... there are plenty of reasons.
thanks.

RC 8 error while transporting the query from Dev to Qa - Element missing

Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
     Start of subsequent processing ... 20110517070025
     End of subsequent processing... 20110517070045
Kind regards,

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

Error while transporting Data sources from DEV to Qual

System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
Manoj

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Error while transporting Dimension Members from Dev to Quality

Hi all,
I am having issue while I am transporting dimension members from dev to QA, The error log is as below; i am not sure what could be wrong;
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset XXXX
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'XXXX'
No access to environment 'XXXX'
BPF: Error reading master data
No access to environment 'XXXX'
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
please advise.
Thanks.
Ambika

hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika

Not updating Prompts when report is moved from Dev to Prod

Hi,
I have a report In development which uses a Prompt ( Dynamic Lov) pointed to an existing prompt group.
When this report is moved to production the prompt does not give any values as the it is not pointed to any prompt group.
Could any one help me why the prompt is not being updated when it is moved from DEV to PROD.
Thank you..!!

Need more info...
What version and are you using BOE or CRS?
Thank you
Don

How to use the repository; uploading reports from DEV to PROD...

Hello...
I'm fairly new to CR-XIr2 (SP3) but have worked with Crystal Reports since v6.0. I'm trying to figure out how to create a dynamic parameter list that someone can select an item from, which will get sent as an input parameter to the SQL Server 2005 stored proc that populates the report. I'm also trying to figure out if there's an easy way to copy reports from a DEV environment into PROD. We have BOE.
Basically, I would like to find out resources online or in books on how to use the BOE repository for dynamic and/or cascading parameters (i.e. pulling a list of text values & their associated IDs from a lookup table that won't be used in the report), images (i.e. corporate logo), etc.. What complicates things for us is that IT is now requiring us to use a DEV environmentit was really easy when we had unlimited access in PROD! We also need to put together a process where reports & other repository objects that are copied from DEV to PROD access the correct db, etc. (Crystal Report in DEV accesses DEV db/repository/etc.when copied to PROD it accesses PROD db/repository/etc.)
Anyway, I'm just looking for info on where to begin--whether it be a book, a BO/SAP knowledge base article, in-class training from a specific company, etc. Thanks!

Hey Markian,
Can you let me know the process you have followed to migrate from Dev to Prod.
We can migrate all the reports and objects and database fields through migrate wizard where you can import all the objects, reports and database fields and users to production enterprise.
Just follow the above scenario and let us know if you are facing any error.
Try publish the reports using import wizard and run it in the crystal designer.
Regards,
Naveen.

How to transport modified query from Dev to QA??

Hi All,
I have made a few changes to a query that has already been transported to QA from Dev. I have removed an Infoobject and introduced a new Infoobject and other such changes.
Now I would like to transport the "new version" of the same query from Dev to QA again so that all the new changes are reflected in QA environment as well.
What steps or procedures do I need to follow for this please?
Thanks for your time,
Regards,
Reddy

Reddy,
BW reporting objects (query / Workbook / WAS tempalte) change transport system is different than other BW development objects (Infoobjects, cubes, transfer/update rules etc..).
Before you start making changes to any Query objects (which are already transported before), first you need to assign the respective Request in the "Transport Connection" tab (click on the BEX with truck symbol icon) and assign your request with the package name.
hope this helps a little..
Good luck
Mavi

Transport a char. from dev to prod

Similar Messages

Maybe you are looking for