Transport ABAP program

Hi experts,
I have a ABAP program needs to be transported into P system from D system, but I cannot find the item in Transport Connection. Could you please guide me to do this ?
Thanks in advance

Hi,
Goto SE38 and then activate and collect the request and then goto SE09 and release it and tell to basis team to transport into target system.
In SE38 , Menu -> GOTO-> Object Dirsctory Entry then change to your packeheg and collect req.
Thanks
Reddy
Edited by: Surendra Reddy on Feb 3, 2009 4:45 AM

Similar Messages

How to transport ABAP programe from D-Q

Hi,
I generated one ABAP Programme to automate the selective deletion in Process chain. I transported the entire Process chain from D to Q. To Q, entire process chain was transported except the programme which was generated in Q. So I am unable to delete the content of InfoCube using Programme in Process chain in Q.So I generated the same programme in Q again. Plz advise me how I can transport the same programme to Q. I don't want to generate the same programme in Q and in P when I transport from Q to P.

Hi,
If you have the program name goto edit mode of the program and follwo the steps below:
1. Goto -> Object Directory Entry
2. Click on Edit and change the package to a transportable package
3. It will prompt for a request .. create a new request and release and transport.
hope this helps.
Best regards,
Kazmi

URGENT : ABAP Program latest transport

Hi gurus,
I have to get the latest version (in fact the transport request pertaining to that version) of an ABAP Program.
I can see the request number in the Version Management,but which table stores it ? Or how this info can be retrievd by..say a dummy program into a file ?
This is very urgent.Kindly help.
Regards,
Sandip.

Hello Sandip,
From the tables E070 & E071, you can get the details for the latest request and its status. Follow following procedure -
1. Get the list of objects for which you want to find the latest request.
2. For this list of objects, first get the details from SE16 transaction. Goto table E071.
3. Give the list of object as input in the field OBJ_NAME & execute.
4. You will get the list of requests linked to this OBJ_NAMEs.
5. Take this list of requests and go to table E070 in transaction SE16.
6. Pass on the list of request in the input of field, TRKORR. Here also select the appropriate status from input field TRSTATUS search help like released etc. Other input parameters can also be given here. Finally execute.
7. Now in the output, sort the list on date in descending order.
Here you get the list of latest requests for your objects. Same logic, you can use in your program by select queries.
Hope this sort out your query.
PS: If the answer solves your query, plz close the thread by rewarding points to each reply.
Regards

Error in Transport of ABAP Program in Process Chain

Hi All,
I am trying to transport a process chain that contains ABAP programs.
I have transported the programs along with the other process chain variants
There is an error that occurs when I transport - "Errors occurred during post-handling RS_AFTER_IMPORT for EVEN L"
The Process chain in the target system is fine except that I am not able to see the ABAP programs in the process chain.
I am not able to locate the error.
Your help will be appreciated
Thanks,
Shruti

If a Process Variant (in this case; 'ABAP Program with success/failed' ) does not exist in the succeeding systems, it is very likely that this Process Variant has been created as a customized variant by a user. Unless the user transports this variant to further systems, this variant cannot be used in the process chain.
Therefore it is better to use general Process Variants (those delivered by SAP) in the process chains. The General Variant here can be 'ABAP Program'.
- Shruti Kulkarni

ABAP Program to Read Transports and Get Descriptions

Hello,
Does anyone out there have an abap program or know of one that will read transports with the technical names and give you the description of the objects, in order to make it easier to verify things in a transport?

Hi,
there is a good weblog here about transport request program that write about usefull FMs.
Try this link
/people/uwe.schieferstein/blog/2009/01/07/multi-purpose-alv-list-programming
Bye
Andrea

How to make a transport of ABAP Program to a QA environment

Hi forum and sorry for my easy question, but i am a newby in ABAP
How can i a transport an ABAP program to QA environment?... is the same machine only changes the mandant.
Thnks
Josue Cruz

You need have transport request for ABAP program.
Transport Request are two types :
1.customizing
2 work bench
customizing - it is related to SPRO Transaction and Functional people will create Customizing request
Work Bench Request - normally irt realeted to ABAP Develper. and all about SE38 Programs ,Data dictinary and so on..
If you want to to release transport request ,then you need to use SE10 or SE09 Transaction.
Goto SE10 and see ur transport request -.it will have sub request #
Select Sub request #->overall check -Syntax check
then Activate check
then click on release dirctly button(Looks like Bus)
activate
now select main request and click on release directly button.
check the status - by using transport logs at SE10 transaction,you need to have sy-subrc eq 0
when you get sy-subrc eq 4 then you deleted something in ur program ,sy-subrc eq 8,sy-subrc eq 12 these all status of ur transport request.
once you done then you need import to Tst Box,use STMS Transaction.
Reward Points if it is useful
Thanks
Seshu

Transport of ABAP Programs via File

Hello,
I want to transport an ABAP-Program into my training-system at home (SneakPreview 2004s).
Because there is no connection between the systems, I search for a solution via filesystem.
Thanks
Armin

Hello Armin,
The approach for downloading to a notepad maynot be very be useful The report will have includes,function modules etc... Also it will have screens which you cannot download on notepad!!
So do one thing. Include the report with all its components : includes,screens etc..in a transport request. Do it though SE80 transaction. Once done release the transport request. This will result in creation of data file and co file.
Now at OS level you can get these files and then you can copy them on CD/DVD. Put these files i the respective folders of your target system and import the transport.
If this is Z report and has a Z development class/message class I would suggest including it also in the transports. Development class/message class availability before the report import happens is a must. So include every thing in the transport and use data files and co-files.
Please award points for useful answers.
Regards.
Ruchit.

Transport of ABAP Program

Hello everybody,
I have a Process chain which contains a bunch of Variants and ABAp Pgms and other process. Now when i transport from Dev. to QA all of the process and variants gets transported except one of ABAP Pgm. To be more clear out of 5 abap pgms 4 got transported one did not and this one is a generated by one of the SAP standard funnctions (so we get a long name such as GP45SXONN8POR4DEXS447WYTUIO). can any of you please let me know if you had a similar problem.
Also wondering if we have a need just to transport pgm how would we do , i was not able to see the abap pgm as an option in the transport connection.
thanks
Priya

You can transport any Program from the ABAP Editor screen as well. in ABAP Editor-> select Go To->Object Directory Entry->Assign ur package n transport request here.

How to transport a ABAP program to Test and Production?

I created a ABAP program and used in a Process chain. I did transport to Testing system. I got an error message that program didn't not find when I was trying to run that Process Chain.
How can collect the Program and transport it again? Thanks!

steps required.
1) find the name of the program
2) collect it in the transport request.
1)go to the process chains maintaincne and right click on the abap process > to the maintaince screen and note down the name of the program
2) go to se37 type in the program name > display > menu > goto > object directory entry.
3) go to se10 > request and check the attributes of the object >
r3tr-fugr- ( package name ) > select the request and release it.
Regards,
BWer

Error while exporting ABAP programs for transport

Hi,
In the process of exporting my abap programs so that they can be transported, I released my work request.
However, during release, errors were encountered, and the status of the release was set to 'Release Started'.
The error encountered was
'[STOP ICON] ===> HALT: rscpi_init fails with rc = 1 (twconv. c:957) Please contact the SAP support.'
Can anyone help? Thanks.

check all the objects used in ur report are in same package
Edited by: BrightSide on May 14, 2008 3:53 PM

Read ABAP Program from Transport File

Hi Guys,
I have a transport log file which contains an abap program, i want to read that program before inporting that to my system, when i open the file the program sources come in not readable format we are on ECC.6 and transport file is also generated out of ECC.6 system.
Does anyone have any idea how can i read the source of and any editor where i can get that converted in readable format.
Atul

Hi,
I think it is downloaded in binary format.
Use the method of uploading binary data files from PC to Internal tables by function module.
GUI_UPLOAD
As filetype - BIN

How to transport an ABAP Program

I have an ABAP Program Z_CSFILE_SYSTEMCMD which I want to put in a transport request. Jeevan and I could not figure out how to do that.
Also this ABAP program uses two program variants:
XCS_PARM_CLEAN and XCS_PARM_PREP
If they are not automatically included with ABAP Program transport, how to transport the?
Thanks a lot,

Hi
you can transport the existing program through version management
Step 1
go to se38. give the program name Z_CSFILE_SYSTEMCMD press change.
Step 2
Change the program by introdusing space in the program(make sure the program is not effected)
Step3
after do so save the program . go to utilities on the top of the menu --- version management .
now after saving you can see Modified version there . again go back and activate the program.
Step4
after activating the program go to utilities on the top of the menu --- version management .
now you can see the the active version of the program and below that you can see the versions (eg version 1, 2 , 3 and so on with the request been genrated next to it)
Step 5
Copy the request for example BD1K900578
Step6
go to SE09 create a request (F6) give the name of the request name (create a work bench request)
Step7
once the a new request created.
go to SE09 and and give the user name and display. you will get a new screen where no objects are added.
Step8
Place the curser on the new request name -> include CNTRL+F11->Paste the request name BD1K900578 (Object list from the request) and press enter.
Step9
Refresh it now you can find program Z_CSFILE_SYSTEMCMD included in the request.
Step10
Relese the request and import the same to Quality.
Follow the same procedure for the rest of the varients XCS_PARM_CLEAN and XCS_PARM_PREP or varients can be created in their respective Servers
hope this helps
santosh
Edited by: Santhosh Nagaraj on Oct 29, 2009 12:41 AM

All transport requests of an ABAP program.

Hi,
I want all the transport request numbers created and released for a particular ABAP program.
Thanks in advance,
Rajesh Gupta

Hello,
Get all the Transport request numbers from the Version management of the program
- Create a Transport of Copies within SE09 or SE10
- Include all the Transport request numbers which u colelcted from the version management of the priogram and transport the Transport of copies .
Ensure the Transports were included in the correct order (ascending Order) within the Transport of copies.
Regards

Transport for ABAP Program

Hello,
Can anyone tell me how I can create a transport for and ABAP Program. It is currently in DEV but needs to go to test.
Thanks

I think you must have created this object as a Local Object. You need to do 2 things here :
Reassign the Development Class to a Z Dev Class.
Use trx code SE38. On the first screen, specify the program name & click on Goto-->Object Directory Entry.
You will get a popup here, change the Dev Class to whatever you have on your side, this will prompt you for a Workbench Transport request. Follow up with Basis to get it to Test.

How to create the condition record by ABAP program

Hi Friends,
I want to create/change the condition record of PR00 by ABAP program. It seems that there have no such BAPI/standard function can help on this. Can any one of you point out a way to me?? Thanks in addvance.
Joe GR.

Joe,
Check with below FM..
BAPI_PRICES_CONDITIONS.
Check this link:
Re: Sample code for BAPI_PRICES_CONDITIONS
examples....
http://www.4ap.de/abap/bapi_prices_conditions.php
Two useful threads on Same topic
Re: Sample code for BAPI_PRICES_CONDITIONS
Re: Problem with BAPI_PRICES_CONDITIONS
BAPI_PRICES_CONDITIONS
Please check this sample code from other thread.
wtable1-table_no = '306'.
wtable1-applicatio = 'V'.
wtable1-cond_type = 'ZPR0'.
wtable1-operation = '009'.
wtable1-varkey = '13001001USD 000000000050068946'.
wtable1-valid_to = '99991231'.
wtable1-valid_from = '20051101'.
wtable1-cond_no = '$000000001'.
APPEND wtable1 TO table1.
wtable2-operation = '009'.
wtable2-cond_no = '$000000001'.
wtable2-created_by = sy-uname.
wtable2-creat_date = '20051022'.
wtable2-cond_usage = 'A'.
wtable2-table_no = '110'.
wtable2-applicatio = 'V'.
wtable2-cond_type = 'ZPR0'.
wtable2-varkey = '13001001USD 000000000050068946'.
wtable2-valid_from = '20051101'.
wtable2-valid_to = '99991231'.
APPEND wtable2 TO table2.
wtable3-operation = '009'.
wtable3-cond_no = '$000000001'.
wtable3-cond_count = '01'.
wtable3-applicatio = 'V'.
wtable3-cond_type = 'ZPR0'.
wtable3-scaletype = 'A'.
wtable3-scalebasin = 'C'.
wtable3-scale_qty = '1'.
wtable3-cond_p_unt = '1'.
wtable3-cond_unit = 'EA'.
wtable3-calctypcon = 'C'.
wtable3-cond_value = '454'.
wtable3-condcurr = 'USD'.
APPEND wtable3 TO table3.
CALL FUNCTION 'BAPI_PRICES_CONDITIONS'
EXPORTING
PI_initialmode = 'X'
PI_BLOCKNUMBER =
TABLES
ti_bapicondct = table1
ti_bapicondhd = table2
ti_bapicondit = table3
ti_bapicondqs = table4
ti_bapicondvs = table5
to_bapiret2 = table6
to_bapiknumhs = table7
to_mem_initial = table8
EXCEPTIONS
update_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE table6 WITH KEY type = 'E' TRANSPORTING NO FIELDS.
IF sy-subrc = 0.
loop at table6 into ret.
write: / ret-type, ret-message, ret-id, RET-LOG_NO, RET-LOG_MSG_NO,
RET-MESSAGE_V1, RET-MESSAGE_V2, RET-MESSAGE_V3, RET-MESSAGE_V4,
RET-PARAMETER,RET-ROW,RET-FIELD.
endloop.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*EXPORTING
WAIT =
IMPORTING
return = ret
ENDIF.
Don't forget to reward if useful....

Transport ABAP program

Similar Messages

Maybe you are looking for