Transport after changes

i have made a changes in a Multiprovider recently.
I alreday had transfered the same MP using transport connection in BI 7.0
Do i need to use transport connection again to transfer the new chnages and go through
collecting the MP and the process of install the MP again or is there a better way out. where I do not
have to transfer the whole transport MP again.
Please help if you can. Thanks.
Venkat

I got your question . Please find the solution .
Yes when the first time you make changes to the transport connection you have transported the same to the Production .
If after that we have made other chnages yes we need to again collect the changes and transport the same to the production server followed by the quality server .
Assign marks is the best way to appreciate help

Similar Messages

  • Issue with Info Object Transport after changing Data Type

    Hi Experts,
    We have a DSO which is running past 5 years. And recently(3 days back) we added new fields into that DSO. Delta loaded for last three days and new info object (Say XXX) data populated into DSO.
    Now the problem is, We identified that, info object data type is not correct. We used data type NUMC  instead of CHAR.So Character information is missing for that field.
    Example:
    Data from ECC: ABC123
    Data Loaded to DSO: 123 (Missed character ABC)
    So we deleted data from DSO and changed the info object data type in Development system.
    And also I have deleted only last three days delta records from DSO and transported my info object to Production. But its giving error as: Info object contains data in DSO".
    But that info object field is empty in DSO. I have already deleted last three days delta.
    Do I need to Delete all 5 years data from DSO to change the data type of recently added new info object ?
    Please give me your solutions and ideas to solve this issue.
    Thank you,
    Best Regards,
    Santhosh

    Hi Raman,
    Thank you for your answer.
    When I changed the data type of info object in Dev, I deleted the content of DSO. And same thing transported to QA as well. Before importing changed info object, I just deleted the content of DSO from QA. So transport done successfully QA.
    But in Production we have a history of past 5 years. So I cant delete all contents of DSO.
    So just deleted only the delta request's which contains data for that info object(3 days back, we moved that info object(NUMC data type) to production,So last 3 days delta only loaded for that info object). And tried to transport it. But it was failed. I am sure we need to drop all data from DSO, if I am interested to go with same info object.
    I have some comments on your first approach,
    1. If we delete info objects from Dev DSO and transport to Production will give transport failure, Why because, my previous transports errors clearly saying that info object contains data in DSO . So it wont allow to remove that info object from DSO.
    2.We are using same info object technical name in BO Data federator also. So if we change add new info objects again we need to make changes with BO as well. I am thinking this point as my last option if i cant find any other solution.
    Thank you.
    Best Regards.

  • How to transport Parameter changes in a crystal report

    Hi All,
    Very Good morning!!!
    I have designed a crystal report with static parameters. Earlier i used to have a dropdown kind of input selection for my parameters.
    Now i got a new requirement for a direct input in the field....tht means no dropdown ...single date field is to be entered directly.
    Accordingly i have removed the dropdown and changed to a single direct date field. I saved these changes to a request and transported to quality. Not sure whether the parameter changes are collected into a request.
    Whereas i couldn't found any changes of my parameters in quality. They are as same dropdown manner in the quality whereas i need them to be a direct field date entry which did not affected the quality server after transporting the changes.
    Could some one please let me know how to reflect these changes in quality server regarding parameter changes in a crystal report for BW.
    Thanks in Advance.
    Jitendra

    Please re-post if this is still an issue or purchase a case and have a dedicated support
    engineer work with your directly

  • Transformationsde-activating after changing write optimized to standard dso

    Hi experts,
    i changed write optimized dso to standard dso because of some changes, but after changes done i activated the changed transformations  standard dso(previously write optimized), but it is not activating , after gone through the issue its happened
    because of 0 record mode, i deleted the 0 recordmode rule and activated.
    Now the real issue:-
    when i transport this changed dso and transformations from dev to acceptance test am facing this issue below are the details.
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
    Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC deleted in version M of DDIC
    Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N deleted in version M of DDIC
    Activation of Objects with Type Transformation
    Checking Objects with Type Transformation
    Checking Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
    Rule 10 (target: 0RECORDMODE group: 02 Technical Group ): Constant is initial
    Checking Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N
    Rule 10 (target: 0RECORDMODE group: 02 Technical Group ): Constant is initial
    Saving Objects with Type Transformation
    Internal Activation (Transformation )
    Preprocessing / Creation of DDIC Objects for Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
    Preprocessing / Creation of DDIC Objects for Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N
    Please help me in this by rectificying in dev system how could i manage to send this transport to acceptance test.
    One more thing even after deletin the 0recordmode in transformation , i can able to see that in techinical group.
    cheers
    vas
    Post Processing/Checking the Activation for Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
    Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC was activated

    Hi
    You can change write optimised to satndard DSO.
    You are supposed to add 0recordmode field in datsource check below links for clear information:
    error  while activating transformations
    Re: Transformation error.
    Ravi

  • Visual composer report not working after change backend function ?

    We already suffered from strange behaviour of visual composer reports totally not functioning at all at some times.
    now I made a change in a function which is called in a function that is used by visual composer. after transporting the change the VC report is not working anymore (while the function itself in the backend is working fine)
    how comes that the VC report is not working anymore after inside changes of the functions it calls ??
    kind regards
    arthur

    As you have made changes to the function those changes wont be reflected to the VC.so you try to re call the function into VC then it will work fine.

  • Role of old released transport after configuring charm

    I want to configure charm 7.1 in solution manager 7.1 SP10 .how can i include released(old ) transports after charm configuration? please share your ideas about this.Thanks in advance

    Hi
    Only hostname/ipaddress and SID name will be changed for solution manager. So for solution manager back RFC in ECC and EP systems you need to change hostname/ipaddress and instance number.
    From SMSY try to update/read ECC and EP systems data. Check it is working fine or not.
    Suman

  • STMS_QA - allow transport of change requests

    Hi,
    we have configured the quality assurance tool (TMS). Now the users must - allow - the transport of change requests into the productive SAP-system via
    transaction STMS_QA.
    If we transport objects via "transport of copies" (from another SAP-system) the QA doesnt work. The users can avoid the QA-System.
    Does anyone know how I could define the transport routes to avoid this situation?
    Thanks
    Michael

    put the Objects in this ( from another system )<b> "transport of copies"</b> request and give the TARGET System name .
    It is simple process , if u are doing first time  do it carefully .
    after doing the process check the TARGET system.
    Regards
    Prabhu

  • Master-detail: detail field not displayed after changed by master field

    I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
    In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
    How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

    Wouter,
    I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
    So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
    Steven Davelaar,
    JHeadstart team

  • Message Server Unreachable (after changing IP address at host)

    Hi guys,
    I changed the IP address in my server. According to note 403708, I updated the new IP address in /etc/hosts. The note also suggests me to change in /etc/services but I see no IP address for me to update.
    Later when I restart my sapinstance, I see the disp+work.exe is "Running, but Message Server Unreachable". I've also updated the IP address in SM59 but I see no change.
    This is what I got from dev_rfc.trc:
    ERROR file opened at 20071206 221839, SAP-REL 620,0,674 RFC-VER 3 549374 MT-SL
    T:5048 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1400
    T:5048 <* RfcDispatch [1] : returns 1:RFC_FAILURE
    This is what I got from dev_disp:
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3212]
    Anyone has any idea?

    Yes I'm on Windows, the path that i'm refering is:
    winnt/system32/drivers/etc/services
    winnt/system32/drivers/etc/hosts
    Anyway my prob is fixed now. Probably the problem is due to I did not restart the server after changing the IP. Anyway everything looks pretty fine now
    Thanks guys

  • Internet very slow after changing my previous airport extreme to my new 2T TC

    Hi,
    I just got a new 2T time capsule to replace my Airpot Extreme that worked fine. After installing it I chose to import a previous wifi network to the new TC and my internet became very slow. I read a few online documents sugesting that the internet slows down when backing up large data, but I dont think it is backing up (I did a force quit on systems preferences that "froze" with the cursor becoming a spinning ball) and after that tryed to restart my mac pro, but it has been recovering space from file vault for 2 hours. I am trying to access the internet from my mac air, but the speed is 10% of what I usually get.
    Any suggestions? Starting to regret getting the TC, I had high expectations about it.
    Thanks
    Rubens

    Thanks William.
    I got help from Apple by phone and aparrently after importing the old airport extreme configurations, my time capsule ended with wrong "Radio channel selection" and after changing the 2.4Ghz to 9 and the 5Hhz to 157 the internet connection is back to normal. thanks

  • How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed and you don't know what it is now?

    How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed by the former husband and you don't know what it is now?  And you set up your own new ID and account but can NOT access the updates, from the App store for the many apps that you already have, because they require that you sign in with that former now inaccessible ID and account and password?  Call it a problem of modern times and changing relationships, if you want to be charitable.

    So I guess it will only be new apps that I download that are allowed to give me their updates while 13 updates wait for me on an ID I can no longer access.
    Yes...  sorry.
    In the future, if need be, you can re download your purchases for free  >  Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Good rule of thumb is to back up your purchases regardless  >  Mac App Store: Backing up your app purchases

  • HT5624 How do I update my Apple ID on iPad and iPhone after changing it?

    How do I update my Apple ID email address on iPhone and iPad after changing the email but not password.  I have verified my new email on iPhone iPad and iMac but settings on all for iCloud still show my old email address. I can't use anything now that needs my Apple ID

    Hello there, Chivs86.
    From what it sounds like you are wanting to sign out of iCloud with the "old" ID and sign in with the new. The following Knowledge Base article should help you with that issue:
    iCloud: Features that work with one account at a time on iOS 5 and OS X Lion or later
    http://support.apple.com/kb/TS4020
    Specifically:
    To change a secondary account to a primary account
    iOS 5 or later:
    Tap Settings > Mail, Contacts, Calendars.
    Delete the secondary account.
    Tap the Back button.
    Tap iCloud.
    Delete the primary account.
    Add the secondary account that you want to be your primary account.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • How can we remove the space after changing look and feel to generic

    Hi
    I want to remove the space which left blank after changing look and feel to generic in formsweb.cfg file.
    Can anybody help me to remove this blank space.

    Hi,
    can you be more specific on teh space you mean?
    Frank

  • Dear support @Apple,  I have tried to log in App Store with my Apple ID 3 times but never possible.  I have tried to change password 2 times. It was successful.But soon after change of my password, I could not log in App store.  It says always incorrect u

    Dear support @Apple,
    I have tried to log in App Store with my Apple ID 3 times but never possible.
    I have tried to change password 2 times.
    It was successful.But soon after change of my password, I could not log in App store.
    It says always incorrect user name or password. But I input correct ! Because just I successfully changed my password through secret question.
    Third time when I tried to change password, the page did not open!
    So I checked my connection by netstat , and I trace the IP address ; 17.154.66.17 this is apple IP, but when I trace , it did not show the route. I will copy
    Traceroute has started…
    traceroute to 17.154.66.17 (17.154.66.17), 64 hops max, 72 byte packets
    1  220.224.141.129 (220.224.141.129)  490.517 ms  64.527 ms  94.524 ms
    2  115.255.239.97 (115.255.239.97)  65.157 ms  89.128 ms  89.806 ms
    3  124.124.251.241 (124.124.251.241)  104.972 ms  79.051 ms  96.948 ms
    4  * * *
    5  62.216.147.137 (62.216.147.137)  102.266 ms  85.581 ms  88.352 ms
    6  xe-0-0-0.0.pjr04.ldn001.flagtel.com (85.95.25.186)  221.939 ms  225.223 ms  236.605 ms
    7  xe-11-0-0.edge5.london1.level3.net (212.187.138.53)  231.629 ms  232.045 ms  233.673 ms
    8  ae-52-52.csw2.london1.level3.net (4.69.139.120)  373.798 ms  390.412 ms  383.277 ms
    9  ae-57-222.ebr2.london1.level3.net (4.69.153.133)  382.653 ms  382.558 ms  376.740 ms
    10  ae-43-43.ebr1.newyork1.level3.net (4.69.137.74)  405.088 ms  377.679 ms  386.527 ms
    11  ae-91-91.csw4.newyork1.level3.net (4.69.134.78)  378.499 ms  389.733 ms  396.375 ms
    12  ae-92-92.ebr2.newyork1.level3.net (4.69.148.45)  391.706 ms  389.605 ms
        ae-82-82.ebr2.newyork1.level3.net (4.69.148.41)  381.615 ms
    13  4.69.135.185 (4.69.135.185)  380.183 ms  414.398 ms  387.054 ms
    14  ae-91-91.csw4.sanjose1.level3.net (4.69.153.14)  384.980 ms  381.375 ms  386.453 ms
    15  ae-4-90.edge2.sanjose3.level3.net (4.69.152.209)  377.304 ms  365.457 ms  373.281 ms
    16  * * *
    17  * * *
    18  * * *
    19  * * *
    20  * * *
    21  * * *
    22  * * *
    23  * * *
    24  * * *
    25  * * *
    26  * * *
    27  * * *
    28  * * *
    29  * * *
    30  * * *
    31  * * *
    32  * * *
    33  * * *
    34  * * *
    35  * * *
    36  * * *
    37  * * *
    38  * * *
    39  * * *
    40  * * *
    41  * * *
    42  * * *
    43  * * *
    44  * * *
    45  * * *
    46  * * *
    47  * * *
    48  * * *
    49  * * *
    50  * * *
    51  * * *
    52  * * *
    53  * * *
    54  * * *
    55  * * *
    56  * * *
    57  * * *
    58  * * *
    59  * * *
    60  * * *
    61  * * *
    62  * * *
    63  * * *
    64  * * *
    What it means??
    Please help !!
    To post this question, I tried thierd time to change password, and before I tried to log in to App store, I logged in this community, and I could !
    Then I could finally log in App store also.
    But still I feel something is wrong with my connection.
    Why the trace route does not show to the apple site ?

    This is a user to user forum. Apple is not here. Apple does not answer questions here.
    iTunes Support -
    http://www.apple.com/support/itunes/
    Mac App Store Support -
    http://www.apple.com/support/mac/app-store/

  • HT4623 After changing broadband suppliers I have a new email address and have had to change my Apple id. I can't change it on my phone so can't access anything. Why doesn't it change when I sync it on itunes and what can I do?

    after changing broadband suppliers I have a new email address. I therefore had to change my apple id. It won't change on my iphone even after syncing. What should I do?

    Follow this procedure:
    1. Go to Settings > iTunes & App Stores > Apple ID.
    2. Tap your Apple ID
    3. Sign out
    4. Sign in with your updated Apple ID.

Maybe you are looking for