Transport alert category and alert rule

Hi,
We are using SAP BASIS 700 (NW2004S SP9). We have created alert category and alert rule in development system. We now want to transport this alert category and alert rule to test system. I have referred to sapnote 913858 but its valid till SAP BASIS 640 and we are using SAP BASIS 700.
Does anybody know how to resolve this issue?
Regards,
Mateen.

Thank you all you 3 wonderful people, your replies did helped and I am definitely going to reward you with the points..Now I am getting alerts in my alert inbox. Can you also help me with some info on alerts?
1) What exactly happens when I check and uncheck "Suppress Multiple Alerts of this rule" checkbox while creating alert rule? I have read some documentations for it in sap help website and also in some of the forums but its still very confusing to me. Can you please give me an exact picture of it?
2) I am unable to get alert emails in my lotus notes. I compared my profile setup in XIJ and XIT using TCode SU01 and found that the PARAMETERS tab had some discrepancies. Can you please confirm if this can be the reason?
Best Regards,
Mateen.

Similar Messages

  • How to coonfigure CCMS Alerts and Alert Categories and Alert Rules

    How to Configure CCMS Alerts and Alert Categories and Alert Rules....plz give detail description related to these

    Hello Raja,
    Can save a lot of your valuable time by telling you only about the events/errors you have to take care of.Here all about the Alert monitoring.Below I am giving the weblogs which are beautifully described about CCMS and mail alerts.
    follow the weblogs one-by-one.
    I hope at the end of this you may get some knowledge on Alerts.
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
    we configure to Adapter Engine).
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
    (This is Important)
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
    /people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
    Please reward points if it is useful...
    Thanks,
    Satya Kumar

  • Alert Inbox and Alert Config does not open in RWB

    When I open RWB I am not able to open Alert Inbox and Alert Configuration links. Its says " Internet Explorer cannot display the webpage" . When I exequte the command ALRTINBOX from Abap stack, it opens the Alert Inbox page.
    Can someone tell me if there is any setting that I need to change in my Internet Explorer. I even tried using Mozilla, but same issue. My team members are able to open these links, hence it may be some setting on my machine.

    Hi Chiraj/ Navneet,
      Thanks for your reply, I have already tried these setting and my team members are able to login from their comps. Also i have tried using SUPER USER id which has all access, still the same issue. Hence I believe it is an issue with Internet Explorer setting.
    Thanks
    Vineet

  • Did Not Find Alert Inbox and Alert Configuration Page

    Dear All,
    I if i click on Alert Configuration and Alert Inbox in Runtime Workbench, It is showing 404 NotFound.
    Please help us
    Regards
    Kumar

    Dear Jay,
    Thanks for your Quick response.
    In my Runtime workbench If I open AlertConfiguration and AlertInbox It is showing 404 NotFound .
    For that Iam following Michal Blog Question Number 13 in IE
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    I have Run the program : RSXMB_ACTIVATE_ICF_SERVICES
    and iam checking SAP note: 750287 (XI 3.0 Runtime Workbench: Alert configuration does not start) and change values in your ExchangeProfile
    iam chaning values in Exchange profile in Runtimeworkbench.
    com.sap.aii.rwb.server.centralmonitoring.httpport
    i dont know here Basis team given proper values in that, if they didnot give those values ,how can i find those values.
    Regards
    Kumar

  • Find the Alert Type and Alert Severity from SSLHandshakeException

    I am using SSL connection and for some use I need to find out the alert type and its severity when it is thrown from the Java library.
    sslException.getAlertLevel() or sslException.getAlertSeverity()
    Like if the level of severity is FATAL I need to take some steps on it, but I could not find from where I could get this information.

    What part of 'all SSLExceptions are fatal' didn't you understand?
    The fact that some SSL alerts are just warnings has no bearing on this, unless you have some counter-evidence that shows that warning alerts throw SSLExceptions too. Do you? The only two alerts I can find that can be warnings are 'close_notify', which is manifested as read() returning -1, not as an exception, and 'no_renegotiation', which as a quick search of this forum will show you is definitely treated as fatal by JSSE, as it is permitted to do by the RFC, and causes an SSLException.
    NB cross posted.

  • Alert Configuration and Alert inbox showing error

    I have activated all services in SICF which are related to alert configuration and changed the HTTP ABAP port according the note 750287
    com.sap.aii.rwb.server.centralmonitoring.httpport to the HTTP port number mentioned in SMICM -> goto -> services -> HTTP port number.
    This is error i am facing after chaning the port number in Exchange profile and activated and refreshed all cache using
    you can also try to reset just ine case:
    a) the RWB
    http://<J2EE-Host>:<HTTP-Port>/rwb/rtc?op=init
    b) exchange profile
    http://<J2EE-Host>:<J2EE-Port>//rep/support/admin/index.html
    Repository, Directory, Runtime
    (All properties -> Refresh )
    <i>Call of URL http://Hostname:8001/sap/bc/bsp/sap/alertinbox/index.htm terminated due to error in logon data.</i>
    what are the changes expected to do..
    Regards,
    Govada.

    > I have activated all services in SICF which are
    > related to alert configuration and changed the HTTP
    > ABAP port according the note 750287
    This is perfect.
    >
    > com.sap.aii.rwb.server.centralmonitoring.httpport to
    > the HTTP port number mentioned in SMICM -> goto ->
    > services -> HTTP port number.
    This is again correct.
    >
    > This is error i am facing after chaning the port
    > number in Exchange profile and activated and
    > refreshed all cache using
    >
    > you can also try to reset just ine case:
    > a) the RWB
    > http://<J2EE-Host>:<HTTP-Port>/rwb/rtc?op=init
    This is wrong. Try to reset using the J2EE port.
    > b) exchange profile
    > http://<J2EE-Host>:<J2EE-Port>//rep/support/admin/inde
    > x.html
    > Repository, Directory, Runtime
    > (All properties -> Refresh )
    This is correct as well.
    Correct the wrong step, by giving the correct URL and then try again.
    Regards
    Bhavesh

  • FQDN error when opening Alert confi and Alert inbox

    Hi PI Gurus,
    When I go through RWB & try to open alert config & alert inbox I get an 'Business Server Page (BSP) error'
    when I open from sicf I am able to open alert inbox.
    How can I open alert config?
    Thanks,
    Krishna

    Hi Krishna,
    Ref: /people/brian.mckellar/blog/2003/09/25/bsp-in-depth-fully-qualified-domain-names
    Ref these weblog;
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    Additional Info:
    Roles for Alert Management
    1. SAP_ALM_ADMINISTRATOR
    2. SAP_ALM_CUSTOMIZER
    3. SAP_BC_ALM_ALERT_USER
    Sap Notes - 913858 and 824039
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
    Thanks,

  • Alert Configuration and Alert Inbox Does Not Show Up

    Hello All,
    We are having a strange problem regarding alerts in XI. We are on NW2004s XI 7.0 SP 9. The TCode 'ALRTCATDEF' works fine. But when we go for configuring alerts in RWB, it says '404 Not Found: The requested resource does not exist'. Can anybody suggest what is the error behind this?
    Thanking in anticipation,
    Amitabha

    If you cannot open your alert inbox check if your alert inbox service is properly activated in SICF:
    - go to TCODE - SICF
    - check if the service alertinbox is activated (you can test it from here)<br><br>
    <img src="https://weblogs.sdn.sap.com/weblogs/images/34500/alertinbox.JPG" width="447" height="219" border="0" alt="image" />
    <br>
    <br>
    Regards,<br>
    Sandro

  • Alert Category missing in RWB and "Add Rule" button disabled

    Hi,
    1) I have added an Alert category in ALRTCATDEF but this alert is not
    visible in Runtime workbench -> Alert configuration. I have even
    pressed the "Update Table" button but still the alert category is
    missing the table.
    2) The "Add Rule" button in Runtime workbench -> "Alert configuration"
    is missing, even after selecting an alert category from the table of
    Alert categories.
    Is this some problem with my browser or something else??
    I am using IE8 / IE6/ Moziall Firefox and PI 7.1
    regrds,
    Piyush

    Hi Piyush,
    -->make sure that you created the alert category in ABAP stack of PI only.Please recheck once.
    -->In RWB if the buttons are in diabled mode means please check the roles for the user which you are using.Make sure that all the roles are assigned to your user for creating the alert category and alert rule.
    have a try with these
    Thanks

  • Alert Category in rule not yet confirmed.

    Hi All,
      I am getting the following error in Alert log
        Error :
    "Alert Category ALERT_CCMS in rule not yet confirmed, Skip creation of new alert".
      I have followed all the steps in the Monitoring setup guide
       for sap xi 7.0 ( 2004s) sps 12
      but still not getting alerts to inbox
    Can anyone help me in overcoming this error?
    Regards
    KLK

    HI,
    In the Alert Inbox check whether you have confirmed the Alerts which are already generated.
    If supress alerts check box is check for alert rules , if the previous alert is not confirmed the next alert wont be triggered.
    Check the Report RSALERTPROC and delete the Old alerts.
    Thanks,
    Tanuj

  • Capturing custom error message from alert category

    We are using XSLT mapping and We are raising custom error message based upon some conditions i.e if vendor number is invalid or blank.If it doesn't meet the requirement,mapping will fail and it will throw error message as" IDoc XXXXXXXXX is having invalid vendor number".
    My question is,we would like to send this custom error message to email receipients through RWB-AFW.
    How do we capture this custom error message is alert category or alert rule?

    You can not unless u use BPM.
    VJ

  • Alert Category - Runtime Work Bench

    Hi Experts,
    Can any please let me know how to logon to Runtime Workbench (RWB) to create an alert rule...as I'm new to Alert Management?
    Thanks in advance,
    Regards
    Vinod

    Hi,
      To add an alert rule, you will first have to select the Alert category.
    In your Alert Configuration page, click on UPDATE TABLE. Then, click on the SQUARE button on the left of your ALERT CATEGORY.
    After you select the Alert Category, the ADD RULE button will get anabled.
    Check XIRWBUSER Roles are below;
    SAP_BC_BASIS_ADMIN
    SAP_BC_BASIS_MONITORING
    SAP_XI_RWB_SERV_USER
    SAP_XI_RWB_SERV_USER_MAIN
    Also it may be due to browser privacy and security issue.
    Go to Privacy in ur browser and set accept all cookies....
    Regds,
    Pinangshuk.

  • Runtime workbench , how can I see the receipients in the Alert category,

    Hi guys,
    Alert framework;=>
    I have previosly created allert category in runtime wrokbench--->allert configuration.
    Also allert rule is created with that allert category.
    how can i see the recipients defined for that alert category
    appreciate your help
    Iver

    Hi,
    There are two ways one can define the recipients of the configured alerts.
    1)     Fixed Recipients: - Use tcode ALRTCATDEF and select your alert category and click on fixed recipient. tab
    2)     Recipients via User Role: It will help you to define alerts recipients via kind of roles they play.
    For more help on alerts kindly check the below mentioned links :
    alert management Alerts all in one
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60c24b82-6da9-2a10-5a93-f1f729d89787
    The specified item was not found. - Alert Configuration
    Thanks!
    Aditya

  • Container for alert category could not be loaded

    Hi All,
    I am having very strange issue with container(Variables).
    I defined Alert category, created container elements and I was using them in long and short text. They were working fine, but now if I open Alert category and click on container tab, its says: Container for alert category could not be loaded and I dont see container elements that I created before. Same thing happened before and I re-created those container variables. But now I have many Alert categories. Is this an existing issue? or does any body having similar situaltion? Can anybody please provide information on this.
    Thank you,
    Indrasena

    Hi Moorthy,
    Thanks for your quick reply . We are on WAS 6.40,SP16, but SAP note 656488 is released on 01.09.2003 for 620, it should have been implemented alreay. Do you think we still need to implement that???
    Thank you,
    Indrasena

  • Variable values in Alert Category

    Hi Experts ,
    I have all the Alert Category and the respective configuration set.
    I am also getting email for the error.
    But the standard variables like
    SXMS_FROM_SERVICE
    SMXS_TO_SERVICE
    SMXS_FROM_INTERFACE
    SXMS_FROM_NAMESPACE     are not gettng populated.
    Please suggest what could be the error or anythng tht could be the reason for this.
    Thanks in advance.

    Hi thomas,
    Did you are using a BPM design to trigger the alert,
    if yes ..
    You cannot use these container variables for alerts of the Business Process Engine (BPE).
    Please refer the link..
    http://help.sap.com/saphelp_nw70/helpdata/EN/d0/d4b54020c6792ae10000000a155106/frameset.htm
    Hope this helps you
    Sunil.

Maybe you are looking for

  • The wi-fi option on my iPod is GREY and says NO WIFI

    Recently my iPod touch (software version 4.2.1) is no longer allowing me to gain access to my Wi-Fi. Instead, the option to select my Wi-Fi, is grey and says NO WI-FI. I have tired to reset the network settings and even restored to it its original fa

  • Issue with procedure

    Hello, I get the first DBMS output statement but nothing else. What is the deal? create or replace PACKAGE BODY XXGHX_SUCESS_FACTORS AS * TYPE : PACKAGE BODY * NAME : XXGHX_SUCESS_FACTORS * PURPOSE : To load Performance Review, Element Entry and Sala

  • My Macbook does not turn on

    So I was downloading an episode from the iTunes Store and I left it downloading all night. This morning I check my laptop and it freezed so I decided to take the batttery out and put it back to turn my computer on, and the computer makes the sound of

  • IPOD hangs all the time.

    Hello members, I am doing song rightclick then Get info->options->Start Time/End Time feature so that I can skip part of the song. I made playlist and found that start/end time works some time, not all the time. Also Ipod totally hangs after I transf

  • Iphoto wont print

    when i click printing an error message comes up saying: No Available Themes There were no themes located.Until at least one theme has been installed, this feature will be unavailable. How do I install a theme to iphtoto in order to print?