Transport all table entries

Hi ,
I need to transport all entries of z table from Dev to Quality.
I have tried creating a new transport request in SE10 and assigning the table data.But i dont want this.
When i am trying to transport from SM30 , I am getting message as 'Transport is not possible for the specified data'.
so what will be the settings to be maintained while creating the table.
Thankyou
Gowri
Moderator message: this has become an FAQ, please search the forum for information before asking.
locked by: Thomas Zloch on Oct 1, 2010 12:55 PM

Via transport tool (SE01/SE10) add an entry in an transport of copy transport request with the key : R3TR TABU Ztable (ignore the warnings), then add a key entry like * or <client>*
You can also
- Set the Table category to "C" Customizing table, maintenance only by cust., not SAP import (remove the first warning)
- In the maintenance dialog set the recording routine switch on standard and the compare flag to Automatically adjustable
Regards,
Raymond

Similar Messages

Transport of Table entries to another Client.

Hello All,
I have a case where a Custom Issue resolution program has been created. We use this interface for logging support issues internally, and the facility for creating the attachments is also provided.(SU53 screens etc). With an onset requirement of System copy, i would like to save these Table data as all the issues are logged in the Issue tracker tables along with attachments.
Can any one let me know how to safegauard this data and save it from wiping out due to system copy.
The tracker is in QTY system and it is having 3 clients. 100,200,300. We are trying to perfrom the system copy on only 100 client and export 200 and 300 and reimport after system copy. So is there any way to transfer this data to 300 and then safely put it bvack to 100 ???
Thanks for tyhe time and suggestions.
Any suggestions would be rewarded accordingly.
Br,
Sri

Hi Sri,
If all data you want to save, is stored in Z- or Y-tables, you can always use a normal transport to save the entry's. Thereby it is not necessary to save the tables in another client, that afterwards again is exported, reimported, and then transport the tables back to old client.
In short, you can do the following:
1) Create a new transport request
2) Add the tables to be saved in the transport request.
3) release the transport
4) Do the system copy
5) Add the previous transport to the importqueue after the system copy.
6) Import the transport into your (new) client 100.
I hope this short guideline helps you in usable direction.
Regards
Rolf

Transporting Z table entries to QA and Prod

Hi Guys,
I have z table (has field MANDT) with delivery class A and no table maintenance in Dev box with 600 records. I need to delete 3 records and change 10 records and then transport them to QA and Prod. I am not adding new records.
I created one CUSTOMIZING transport.
I am using SE16 -> Table Entry -> Transport Entries. It is asking for workbench transport instead of Customizing transport.
Can I transport the deleted and changed entries using WORKBENCH transport?
Please help.
mini

Hi
Yes u can.
Max

How to transport standard table entries

Hi All,
I want to transport SAP standard tables records from one server to another server in append mode. It is actually required for upgradation purpose.
Can anybody please guide me in this regards ?
Thanks in advance!!

Hi Reddy,
Thanks for your suggestion! but one problem I don't have the Transport Entries submenu enabled for all the SAP standard tables. Is it table specific ?. Please let me know how to enable this sub menu or is there any other generic method to attach the records of any SAP standard table in a TR.
Thanks!

Can I TRansport a table entry of LTDX, which DELIVERY CLASS is E, ALLOWED?

Hi Experts,
se16> LTDX->specified the prog. name as RFITEMGL>selected my 3 entries of the alv lay out varinats--->MENU> TRANSPORT ENTRIES--> system asking me the TRansport #--
> created a TR #
So, pls. let me know that, R they transport as normal TRansports? coz, the table LTDX DELIVERY CLASS is "E" type & DIAPLY & MAINTAINANACE ALLOWED??????? and there is NO SM30 for this table!!!!!!!!
thanq

I have already parsed the HTML and checked all the closing of tags and corrected the indent using Tidy and then I have applied this code so some other suggestions please

Transporting Custom table entries

Dear Experts,
I have to add some values to the fields in my customizing table(Delivery class C).
Iam doing it through SM30.
I dont want to add any new entries but change the values in some fields.Can I make these changes and put it under a change Request and transport it to the Q and productive systems so that only these changes are made there and the other rows remains unaffected...
The reason why Iam asking this when I try to edit the table with SM30,I get a message
"Individual entries cannot be put in ChangeRequest"
Regards
K
Edited by: Kohinoor72 on Jan 4, 2012 3:57 PM

Make the table contents transportable by creating a "table maintenance generator" in SE11 under Utilities -> Table maintenance generator.
In that screen for the section "Dialog data transport Details" the "Standard Recording Routine" option should be selected.
Then only will the system ask for Transport request when entering data through the generated maintenance view in SM30.
If you already generated table maintenance and now setting the Standard Recording Routine attribute, you need to regenerate the table maintenance by clicking the change button and selecting all check boxes. Remember that if you created any custom events / screen modification, they need to be put back after regeneration.
Also change the "delivery class' in the SE11 table attributes to 'C' - Customizing table

Transporting table entry with primary key 120 char

Hi all,
I have 2 separate questions which I feel are closely related.
In the url:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb6e446011d189700000e8322d00/content.htm
It says:....
If the key length is greater than 120, there are restrictions when transporting table entries. The key can only be specified up to a maximum of 120 places in a transport. If the key is larger than 120, table entries must be transported generically.
How do I transport the table entries "generically" for such a table?
To further illustrate my actual problem:
My problem in the real world lies with the MIMETYPES table, maintained in trx SMW0.
I select the mime types row by row and do a Table Entry > Transport Entries, but get an error that says
"Key entry for table MIMETYPES may only be generic".
As a result it fails to attach to my transport.
(Note: the primary key of MIMETYPES is 128 chars long)
The Diagnosis long text says "The key is longer than allowed by the Change and Transport System (120 characters)."
The Procedure says:
1. Make sure that you only specify the character fields before the
 first non-character key field. You must enter the key with a generic
 ending. Enter the generic symbol directly after the specified part
 of the key.
2. You must enter the generic symbol at the latest in the 120th
 character of the key. 
What is this generic symbol that i need to insert at the 120th position??
Message was edited by:
 Kevin Wong
Message was edited by:
 Kevin Wong
Message was edited by:
 Kevin Wong

Thanks Nick!
So the mysterious "generic character" is actually the asterisk (*). It works.
Strange tho as the error long text says to insert the "generic character" at the 120th character position of the key, but I found that altho I can save it, the transport still fails with the same error.
I tried placing the * right after the key value e.g.
KEY123*
and it worked.
Thanks again!

Problem while transport table entries (TFRM)

Hi ,
An routine has been developed earlier, It has been release but not moved to Quality. In the same request there are another 3 or 4 tasks which i don't want to transport. So created a new request all the coding part is saved. But when i am trying to transport the table Entries of TFRM into a transport request i am getting an error as specified below.
Fill table key for table TFRM only up to position 007 only
So can any one help me out in resolving the issue.
Thanks In Advance.
Ramana

Hi Soniya,
That is not the issue, when i create a Routine using VOFM transaction at the time of creation it self entries will be created in the table TFRM, but since the request has been release I need to go alternative way to transport the entries. So I am trying to transport the entries into a request.that time I am getting error.
Thanks & Regards,
Ramana

Problem transporting table entries

Hi,
I need to transport my table entries frm development to test and production. However, even if i us standard recording routine in the table maintenance and then create entries ant transport, it doesnt work.
Also, is there an option to do it directly from SE11? Do i need admin rights?
Regards

Hi,
Table entries can be included in a transport request and can be transported .
For including the table entries in a request,Follow the below mentioned procedure.
Hi,
Table entries can be forcefully included in a transport request and can be transported to the required system.
For including the table entries in a request,Follow the below mentioned procedure.
but the data will be stored under workbench request
1.create a workbunch request in se01.
2.Double click on the request no.
3.Select the object tab in the new screen appeared.
4.Go for change mode (Ctrl+F1)
5.Select the Program id as R3TR and Object Type as TABU.
6.Give the Object name as Table name(ZTABLE)
7.Click on the function button on that row.
Give * in that editor appeared and save this.
Now all the table entries are binded in that request and can be transported across the server.
instead if you are putting on the user recordin on in TMG it will ask for a request each time you save some entries in the table.

Transport of a Custom Table Entries

Hi Forum,
I need some information as to how do we transport changes made to a custom table. We have created new entries in the Table and we need to transport those entries to QA. System did not ask for a TR No while we were creating the entries. Is there a way we can achieve it?
Any Inout on this would be of great help. And Rewards gurranted.
Thanks and Regards,
- Prasenjit

Hi
Try to change the Delivery Class to C in se11, Delivery and Maintenance tab.
Other option:
go to SE10 and create request.
in that give,
Program ID : R3TR
Obj : TABU
Object name : you table name.
double click on the table name and give key filed values. If you want to transport entire table entries
give * .
Regards.
Manuel

Custom table entries transportable / maintainable in production environment

Hi,
I have a custom table with table maintenance generator (automatic transport of table entries). I would also like to maintain the table entires in the production environment (i.e. using SM30 transaction, rather than transporting the entries from Quality). I hope there is a cofiguration to do this.
Could any one help me on this.
Thanks in advance.

Adding to what others have suggested, it is not advisable to give SM30 access to your users. Its better to create a parameter transaction for the maintainance dialog and give the user access to that transaction. Other way of restricting the access is using authorization group selection while creation of maintainance dialog (&NC& will give access to every one). Check the below link to see how to create a parameter transaction for sm30.
[Parameter transaction for sm30|http://www.divulgesap.com/blog.php?p=MTg=]
Cheers,
Ravikiran

Attaching a table entry to a transport request by a program

Hi,
I need to create an entry in a database table through my program and at the same time I have to attach the same in a transport request. The Table is client independent.
I am able to create a transport using BAPI_CTREQUEST_CREATE. But does not know how to add the table entry to it.
Please help.
Regards,
Himanshu

Hi Himanshu,
there are two ways to put table entries in request.
one is if you have table maintenace generator for that table then the table entries will automatically store in the request.
second way using the tcode se16 execute the entries. select the entries by check box, from menu table entry -> transport entries.
using this two ways you can transport the table entries.
Regards,
Ravibabu. A

Custom Table Entry not in Sync between Different Environment

Hi All,
we have different environment like Dev System, Quality system, performance testing system etc... these are all environment customs table entry not in syn .. Table entry should be syn. How to make it syn all the entry between all environment without do any manual work. Kindly help on this.
Thanks

Hello Mohammed,
It depends on what type of tables you are referring to. If you have a table of type 'Customizing', you have to transport your table entries across different environments and they will be in Sync.
If you are referring to tables of type 'Master Data', they have to be maintained in all environments.
Table of type 'Transaction Data' by default have different records based on your day to day transactions.
You cannot have all custom tables with same data in all environments. Hope this helps.
Rgds,
Vijay.

Transport own table including content

Hi,
I have created a program with an own dictionary table. Can I transport the table
with the filled content from the development system to the test system? If I
would transport my request now, it will just create the table and all other objects,
but without any content, right?
Cheers Michael

Hi...
Do you wnat to transport table with entries..?
If so.. follow this steps...
Create a TR in SE01.=>Display TR=> Place the cursor on the TR=> menu=>Request/task=>Object list=>display object list=>change=>Add new rows=>
Here give program ID as R3TR, objects as TABU and object name as your table name. Press enter. U may get a message. Just close it and double click on the table name. In the Next screen press insert icon. Here u can specify the Key(Table key values) If u want to transport specific entries.
If u want all entries to be transported then simply give * and save the TR. Now if release this TR it will transport all table contents to the higher system.
Thanks,
Naveen.I

I have one query about table entries.

i have one query about table entries.
suppose for particular table we maintained 5 entries in dev server. actaully in the dev we have only these 5 entries.
In production we have 200 entries actually.
If we move the cts from dev to production ,we will get 205 entries right
please help me in this.

If i understood correctly, It is a Z table and you have done some changes in DEV system. If you move this to Production, it wont effect the production entries.
There are 2 different ways you can trnasport a Table. 1. with Table entries 2. Without table entries.
If you transport with Table entries then the DEV entries in this case 5 will be moved to PRODUCTION totaling 205.
If you transport without table entries, then in Production you will find only 200 entries.

Transport all table entries

Similar Messages

Maybe you are looking for