Transport and 0Logsys

I am looking to transport changes made to a query. It will be the first time I will be transporting. When I go to transport connection, I also have 0Logsys and cannot uncheck this. What does this represent and is it okay to transport? Thanks

Hi,
Logical system is the name of client in an SAP system..
And client is a sub set of data in SAP system.
No problem u can transport it..from 3.0A version the mapping of the logocalsystem will be done automatically.
Before that version we have to maintain the table RSLOGSYSMAP in the target system manually...
Regards-
Siddhu
Message was edited by: sidhartha

Similar Messages

How to use the Variants in SAP Transportation and what is its use ?

Hi experts,
How to use the Variants in SAP Transportation and what is its use & How to create a variant in SAP ?
Can anybody answer this ?
Regards,
Shakti

Hi,
If you are asking about "slection vairants" in SPRO settings of "shipment cost document" then
When it is activated,
each user can have his own slecetion and list criteria for
1. List shippment costs:calculation
2. List shippment costs: settlement
This can be directly saved from VI01 screen by the user.
from environment> lists
This is user specific only.
Hope this helps.
Regards,
Sharan

BAPI for updating Maintain Duration in Transportation and Delivery scheduling

Hi all,
Iam looking for a BAPI to update the Duration Times in Transportation and Delivery scheduling. I reluctant to use recording on SM30 Table maintenance T code and use it in LSMW. Is there a BAPI or Standard i/p Program to load these details. I have more than 200000 records to input.
A list of all BAPI's in Transportation Management module would be great as well.
Regards,
Avi

Hi,
@praveen: I tried the solution provided by you and it worked for me in this context. But it seems this BADI gets triggered every time the delivery is getting saved. So for my test purposes, I'm triggering this BADI in a program, but in actual scenario, the BADI would be called on every sy-ucomm = 'SICH_T' i.e. SAVE. hence, I can't separate my piece of code using this condition.
I'm trying to call my FM(update module in collective run mode) inside this BADI in backgrnd task as a separate unit but this doesn't seem to work.
Any more suggestions?
Thanks
Ashish

What is a transport and how to configure it?

Hello,
I am using NW 04 Patch 11.
When users go to home->work there is a calander there.
The calander is not active and there is a message there:
"No transport has been configured for the calendar".
Can someone please explain me how do I get this calander to work, how do I configure a transport and is it possible to connect this calander to the user's exchange calander?
Roy

Hi Roy,
@Lars: sorry, but this has nothing to do with Portal Transport Management, it's about transporting data from
the Exchange server to the portal.
@Roy: yes, it should be possible to connect this to the users Exchange calendar. This calendar is part of the
Microsoft Exchange Connectivity Architecture. You can find a detailed explanation in the NetWeaver
documentation under the topic Collaboration --> Groupware ...
http://help.sap.com/saphelp_nw04/helpdata/en/4b/be49e7e0b0eb449fdebc79d018f896/frameset.htm
Best regards,
Kilian

Diffrence between File Transport and CTS+ Transport in PI

Hi Guys,
Can you please explain me the diffrence between File Transport and CTS+ Transport in PI.
What are the advantages of CTS+ Transportation over FILE Transportation...
Thanks,
Siva...

The file transfer will simply export the objects to a TPZ file, allowing you to import on the target system. This requires manual copying and paste of the object and have no further control.
CTS+ on the other side, allows the environment to maintain transport requests with control over objects audit. For example, an object must be created on DEV, then after being developed it must go to QA system and will only be sent to PROD when this object was approved by the respective team on QA. For more information on CTS+, please check the help page below.
http://help.sap.com/saphelp_nwpi71/helpdata/en/9a/775de286874bc78dcb1470bc80f0f9/frameset.htm
Also the documentation below will provide a more complete overview and configuration steps for the CTS+ usage
"http://www.sdn.sap.com/irj/scn/go/portal/prtroot/com.sap.km.cm.docs/library/application-lifecycle-management/lifecycle-management/software-logistics/new%20features%20in%20sap%20enhancement%20package%201%20for%20sap%20netweaver%207.0.pdf"
Please also refer to the SDN thread below
How to move PI objects in IR and ID from DEV to QAS

Difference Between Transport and message protocols in XI

Hi,
Can u please explain with some example , Difference Between Transport and message protocols in XI.
thanks
dhanush

Hi dhanush,
This two can have different attributes which were assigned in the adapter metadata. Please see this help for some info on this:
http://help.sap.com/saphelp_nw04/helpdata/en/79/e462405c910272e10000000a155106/content.htm
Go to SAP BASIS 6.40 or 7.00 software compoenent and open namespace http://sap.com/xi/XI/System. Go to Adapter objects and open Adapter metadata. Then open any adapter. Here you can see all the properties of your adapter which support.
Transport protocol gives information about outside of message details, kind of system, security details.
A transport protocol is a network protocol that has the capability of transferring some payload from one node to another, thus providing some level of transparency from the underlying network.
Transport protocols are used as a mechanism to move payloads around a network. Typically, a payload will have a transport binding associated with it. For example, SOAP (acting as a payload) has a predetermined binding for HTTP (a transport protocol).
Some common transport protocols include: HTTP, HTTP-R, SMTP and BEEP.
Message protocol gives you an idea of message type XI payload
http://help.sap.com/saphelp_nw04/helpdata/en/b6/0b733cb7d61952e10000000a11405a/content.htm
Regards
Biplab
<b><i>
note:reward with points if helpful</i></b>

Transport and Change Management

Hello,
We need to modify our MDM structure (add fields and tables). We would like to avoid unloading the repository. Can we do that in our test environment and move to Production only the structure while keeping the data in Prod.
What is the Transport and Change Management patch? Is this what we need?
Thanks for your help!

Hello,
This is not possible, as there is no support for Transport and Change management. You will always need some down-time in production. But there are some strategies to reduce the down-time.
(1) You could use the Java ADMIN API to create a batch-script that performs the required repository modifications. Once you validate it works, unload your repository, run your program and load the repository again.
(2) Create a "slave" repository and re-direct your production users to that repository. Unload your production repository and make all changes. Once done, reload that repository and switch back. Remember that this will only help to keep a "look-up" only version of the production repository...
Regards
Dirk

Problem with mapping 0SOURSYSTEM and 0LOGSYS in BI7.

Hi,
Can anyone tell how to map 0SOURSYSTEM and 0LOGSYS in BI7. I have these two fields in my DSO and get it populated from the Datasource. To which fileld in the datasource can i map these fields or what routine should i write?
In BW3.0 we used to just include these fields in the transfer structure of the infosource and it used to get automatically mapped in the communication structure. But in BI7 since we are not using infosource we cannot do it.

hi,
chk using this in transfer routine
PROGRAM CONVERSION_ROUTINE.
Type pools used by conversion program
TYPE-POOLS: RSD, RSARC, RSARR.
TYPES: DE_0LOGSYS(000010) TYPE C.
Conversion rule for InfoObject 0LOGSYS
    Data type       = CHAR
    ABAP type       = C
    ABAP length     = 000010
FORM CONVERT_0LOGSYS
USING    RECORD_NO LIKE SY-TABIX
           SOURCE_SYSTEM TYPE RSA_LOGSYS
           IOBJ_NAME TYPE RSIOBJNM
CHANGING RESULT TYPE DE_0LOGSYS " InfoObject value
           RETURNCODE LIKE SY-SUBRC.
$$ begin of routine - insert your code only below this line        -
IF RESULT IS INITIAL     and
     IOBJ_NAME = '0LOGSYS'.
fill source system
    RESULT = SOURCE_SYSTEM.
ENDIF.
$$ end of routine - insert your code only before this line         -
ENDFORM.
Assign Points if useful
Ramesh

About transportation and shipment cost caluclation

Sir,
I have searched the configuration step of transportation in this forum, but i couldn,t able to under stand the steps.
Kindly give me the configuration steps of transportation and shipment cost settlement.
This will helps me alot
thank u

Dear Supraja Ballari
Please go thru this link
[Transportation Planning Interface |http://help.sap.com/saphelp_47x200/helpdata/en/1a/0e37cd539911d1898b0000e8322d00/frameset.htm]
Once you opened the link, check to your left screen where you will find additional links. Go through the same
thanks
G. Lakshmipathi

Manual Transport and Maintain in Client Entries in Table

Hello,
I am trying to figure out how I can maintain table entries in client and have the option to manually transport entries from our development system. Can this be done? If so, what settings are required.
Regards, Dean.

Hi Dean ,
PLease proceed as below :
To add the contents in the TR, we have to double click on the respective TR, then another screen appears where we need to key in the details as follows:
u2022     Program Id u2013 R3TR
u2022     Object Type u2013 TABU
u2022     Object Name u2013 The required table name which should be transported, and press enter. This will allow transporting only the structure of the table but not its contents.
In case the contents are also to be transported, we should click on the key field icon and add the key fields of that table which will transport the particular record.
Hope its help you

Screen Layout for "LECI - Check in Means of Transport and Visitors"

HI GURUS & EXPERT,
CAN any one tell me that How can I make some field required in LECI - Check in Means of Transport and Visitors
Or T-cde for defining Screen layout fo it/
Thanks in advance.
DSC

Closing the issue.
Solved by me via Z-develoment.
DSC

Transport and ListCube problem

Hi Guru's,
My client has a cube ZIP_RC_01 in BWD that is all activated. It is a virtual cube that requires reconciles data in Integrated Planning against source R/3 tables.
Unfortunately, when a contractor had transported this cube to BWT, the cube had failed in BWT. Then someone had subsequently tried to transport and have resolved some of the issues but now they saythat they still get an error when they perform a listcube in BWT - not in BWD.
Now, they asked me to diagnose why BWT is not working and potentially create a transport from BWD to BWT if necessary.
How to go about doing this and what are all the required things I need to know initially to start off with and please guide me step by step as I haven't dealth with such kind of scenarios in my experience. Thanks in advance.
Thanks & Regards,
Praveen Battula

Hi Arun,
Thanks for your quick response.
When I go to List Cube Transaction Code and execute in BWD system, there is no problem.
But when I go to BWT system and go to Listcube Transaction code and execute then the following error is being displayed:
Error reading the data of InfoProvider ZIP_RC_01
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
And also the following warning message is being displayed:
There is still no data source assigned to VirtualProvider ZIP_RC_01
Message no. RSOA306
Diagnosis
There is no data source assigned to VirtualProvider 'ZIP_RC_01'.
System Response
No data is selected.
Procedure
In the Data Warehousing Workbench, call the modeling view and search in the InfoProvider hierarchy of the affected VirtualProvider 'ZIP_RC_01'. In the context menu of the VirtualProvider, choose the Activate Direct Access... function and select at least one data source.
If no data sources are displayed for you to choose from, this may mean that there are still no data transfer processes defined that have the VirtualProvider as a target, or that for the source assigned to the VirtualProvider, no active transformation rules exist for remote-enabled DataSources from the SAP source systems.

Hello! i am from Romania and i want to buy an iphone from the USA site. can i buy it neverlocked? and if it is possible how much should it cost in totat(with transport and the iphone price)?

hello! i am from Romania and i want to buy an iphone from the USA site. can i buy it neverlocked? and if it is possible how much should it cost in totat(with transport and the iphone price)?

You can buy a factory unlocked on direct from Apple sim free, make sure you get the right one and not just a contract free one. I am sure one of our US members will be able to give you the price.

Transports and gateway

What is the relation between transports and gateway? We had an issue with STMS today. The import queue wont show up and the process would hang forever. redistributing TMS also didnt work. but when we killed the gateway process(unix level) on some systems it worked.
I dont understand the relation though.
Can someone help.
Thanks
Cyrus

Hi Cyrus,
A transport domain consists of all the SAP systems that
have certain same system configuration settings.
Now there exists a reference configuration on the
transport domain controller, which is one SAP system with
all the other systems in the domain taking copies of this
reference configuration. Each time change is made in this
reference configuration, it has to be distributed to all
the other SAP systems in the domain, in the form of transports.
A SAP Gateway acts as a bridge between the SAP system and
external program/system, useful for data communication.
Hence we can conclude that for distribution of the
reference configuration from the controller to other SAP
systems, we need a SAP Gateway for communicating between
the systems. That should be the relation between gateway and transport.
For more info:
http://help.sap.com/saphelp_nw04s/helpdata/en/14/94fc3f8fc2c542e10000000a1550b0/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bb/9f13dc4b9b11d189750000e8322d00/frameset.htm
Hope it helps..
Regards
Srikishan

Transportable and non transportable requests in the SRM EBP cusomizing

Hi friends,
can u please give the list of transportable and non transportable requests for the ebp configuration.
thank
Arun
Edited by: arun kumar on Aug 6, 2008 8:19 AM

wrong forum
Regards
Juan

Transport and 0Logsys

Similar Messages

Maybe you are looking for