Transport changes to a DP MPOS

Dear All,
I want to add a new characteristic to an MPOS in Dev client and transport it to Quality. The MPOS and planning area are now in Dev and Quality client only. It has not been transported to Production client yet.
I can deactivate the existing MPOS, add the new characteristic and then reactivate the MPOS in Dev client. How should I go ahead to transport this changed MPOS to Quality client and later to Production client?
Any ideas on this.
Thanks in advance
Ehsan Ahmed

Ehsan,
Use the Transport connection.
/SAPAPO/MSDP_ADMIN, open your MPOS. Find the dependent planning area(s) (goto > Dependent Planning areas). Open the resulting planning areas. Then, Goto > Transport connection. Transport any planning areas that use your MPOS.
If you do this with a live production client, you should have a plan to protect the existing data in your production system. Just in case....
Best Regards,
DB49
Edited by: Dogboy49 on Dec 10, 2010 6:47 AM

Similar Messages

In CMS, there is no Transportable change list in ID

Hi All,
I am using CMS. I want to transport Configuration Objects. But when I am going to Change list tab page in ID, I am able to see only open and close Change list. There is no option called Transportable Change List.
I have followed HELP.SAP.COM which tells,
"You have created an XI track in the Landscape Configurator and entered the addresses of the development, consolidation, and productive directory. There are no software component versions in the Integration Directory. Therefore, for directory transports using the CMS, you specify the software component version SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0). This refers to all configuration objects of the Integration Directory.
Once you have made this setting, you can create transport lists for the CMS. The status of the change lists no longer changes to Closed immediately after their release, but first changes to Transportable."
But still the status of the change list changes to closed and there is no tab called transportable change list.
However I am able to transport IR objects correctly and there I am able to see Transportable change list too.
Is there any specific configuration for this??
Warm Regards,
Gouri

Hi Gauri,
for ID, the XI track which you have created, you should specify SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0) swcv.............now you create a new config scenario in ID.............Now you should see transportable change list in ID....
Thanks,
Rajeev Gupta

After transporting changes are not happening

Hi All,
As per the requirement we need a change in the pricing procedure ZJEXPS
(Export Sales Switch). We made the changes in transaction code V/08.
But after transporting the request to quality server, changes are not reflecting there.
I had checked the request number all the tasks are there and transport was completed with warning.
our consultant created another request and then also after transporting changes are not reflecting.
How it is happening particular to this request?
How to trace this? Kindly suggest me.
(Ours is two system landscape with master client 009 and quality client 007.I am trying to transport to 007)
Regards,
Nagendra.

Hi
Check the import logs. If you are getting warnings that original objects cannot be replaced. You need to import the change request in unconditional mode. During performing imports select option, overwrite originals.
Some times the requests contain the objects, which are original to the target system, e.g SAP standard objects.
Check if this could help you.
Regards
Rahul

Transport change request

Hello Team,
I have a transport change request that needs to be imported to production. It has the changes to userexit MV45AFZZ. Can i import it to production system with users on the system or it has to be done when there are no users on the system. Please advice.
Tthanks.
Regards,
Baabi

Sales documents in a production system get created in various ways - through online users, through interfaces with other systems like EDI, Web or any other system or through any background process.
When source code in common includes like MV45AFZZ etc changes it needs recompiling of the whole main program SAPMV45A again. If changes happen while documents are getting created it may cause instability or even run time termination.
Better to choose a silent time when users or other processes are not creating any sales document (inquiries, quotations, orders, contracts, credit/debit memos etc)

CTS - Don't Always Want Transportable Change Lists

Is there a way to turn off automatic creation of the Transportable Change Lists? At times, especially during the trial and error of development in the IB-Repository, I do not like having a bunch of transportable change lists created. I end up deleting them manually since I always do initial transports of the entire SWCV after I am done.
In the past I have turned off the change lists by SWCV when using CMS for transports (config exists in Administration section of Integration Builder). Is there something like this for CTS?

This change did not resolve my issue (and we bounced the system to make sure it took effect).
If anyone knows of anything else, please chime in.
When I make a change in IB-Repository, then go to the "Change Lists" tab and activate the change, a "Transportable" change list automatically generates. I would like that turned off and I will only make transports when I am ready.
Thanks

Transporting change request

hi SD experts,
I really appreciate if anyone tell me abt Transporting change request concept
and do sd consultant hve any role in this scenario.
Thanx in advance
regards
vaseem

Transport request is not generated for Master Data. For eg: Customer Master, Material Master, price master, etc.
Benefit of Transport Request:
SAP Landscape normally has 3- Tier system:
Development Server - Where customization takes place. TRansport request is generated at this level & then first transported to Quality server for testing whether it meets the requirement or not. Once the requirement is met in Quality server then Request is transported from Development Server to Production Server (Actual / Live System)
Quality Server - Mainly useful for testing.
Production Server Actual / Live server, where the real transactions are created & posted.
Regards,
Rajesh Banka

Error while Transporting changes in Process chain

Hi All,
I have added a Hierarchy InfoPackage in Process chain and added this InfoObject in Save hierarchy and Attribute change Run Process types.
My transport Request is showing only three entries each for
save hierarchy , attribute change run and one for Process Chain.
Now when I transport this changes to Process chain to Acceptance its showing Error message in Acceptance as
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
Process variant LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 does not exist in version A
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
InfoPackage   no longer exists in object version A in table RSLDPIO
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
Variant 'ZPAK_4AY55YMC1H454OQWJUBNJCYE9' of process type 'LOADING' not found in A version
Errors occurred during post-handling RS_AFTER_IMPORT for RSPC L
The errors affect the following components:
   BW-WHM (Warehouse Management)
My question is , Why the Transport request is not transporting the InfoPackage.
Is there any solution for this?????
Thanks in Advance
Best Regards
Pratap Sone

Hi Pratap,
       The infopackage has not yet been assigned to a package in all probabilty. Change the package and then transport the IP and then transpost the process chain request.
Regards.
Edited by: Ansel D'Souza on Sep 8, 2008 7:31 AM

Problem in transporting change document

Hi guys,
I have created one change document for customized field.
I m getting problem while transporting this change document.
The view is not generating in production system.
Function group is coming blank for change document object in production.
Is there other way of generating the change document ???
Kindly reply.
Regards,
Siya

Check this.
1. Deletion flag is set or not.?
2. Execute MCDOKDEL and check for the document
3. Archiving path Storage Path location.?
Thanks
S.N.

After transport, changes are not updating

hi..........
We are configured two clients as master client(009) and test client(008) in one DEV machine.
i performed one transport from 009 to 008.( i released through scc1 and imported in 008 through scc1) it's transported successfully.
but our consultant saying that, those changes is not updating in client 008.
i performed so many transports to 008 and also to prd. before and after.
then why the changes were not updating in 008, to that particular request?he created another request with the same issue and i transported it.again same problem. is there any thing to check from basis side?
(4.7E,mssql,widows 2003 server)
Please help me.................

Hello,
Check the transport log. Even it is saying Sucessfully Imported, just open it, read it.
And check the size of the transport request also.
And another option is add this particular request with another request and transport it. Check for anything is happening....
I don't think anything balance has left from basis side....
Note: Points always encourage me to reply !!

After transport changes are not reflecting to other users

HI all it's urgent
One user abcd who had made some changes to some screens is not reflecting to other users after transport we have 2 clients 100 and 200 changes are reflecting in own user id we transported with scc1 transaction
with regards
vinod

I am not a developer, so pardon me if I misunderstood this question. I thought screens and other repository objects are client independent. That means the change should be evident in all clients without a need to transport.
Is this to do with security by any chance ( though it seems unlikely )? Can the other users see the change in the original client in which the request was made? That should help you determine whether the problem lies with the transport or outside. Also you can check the contents of the transport in SE01 and see if it holds the kind of data that you are expecting it to. I am guessing you have already generated the screen after saving the changes.
Hope this helps,
Sanket

Transport-changing package owner

Hi Gurus,
I am facing an issue in BW system. After changing transport layer for particular package , Request is going into corrections and repairs. Since this is not the original system for the object, also it was prompting for local workbench request only.
To eliminate this problem i used TRANSPORT OF COPIES through which you can transport the objects belonging to some other system.
But after changing the transport layer, i am getting the following problem. It will be of great help if anyone can tell me the reason behind the below issue.
       ABCK904251      XYZ      PACKAGE TRANSPORT LAYER CHANGE ( 12.02.2011 )
       ABCK904252   123      Development/Correction
       ABCK904253    123      Repair
Also how we can change the owner of a package.?? it seems that somehow they all are interelated.
Please reply,
Thanks N regards,
Alok

Hi,
Suppose your having 2 system landscapes
One Landscape   -> SD1   ST2 SP3 , Here your having RD3 as Transport Layer name
Another Landscape -> SYD1   SYT2   SYP3, Here your having RD2 as Transport Layer name.
Now you have moved some objects from SD1 and SYD1.
Now when you check the package of those objects in SYD1, the Transport Layer name will show as RD3 in SYD1.
Here in SYD1 actual Transport Layer name is RD2. So you have to chage the Tranpsort Layer name for that package which you have imported from SD1 to SYD1.
Once you import to the SYD1 from SD1, In SYD1 change the Transport Layer in SE80 t-code.
You can't change the Owner of the name, but when you chage that object latest modified by will be your name.
Regards,
Shankar.

Restore in Transport / Change system

Hello , experts
I meet a trouble and hope get help from you.
Acctually I did some change in IMG setting in a SAP system.
The change I did hang under a transport request number.
Now I hope to remove all the change and restore the system to original status, can I do it by some manual on the transport request I created?
Is it possible?
Hoping for your help, thanks a lot

zhenglin,
is the request released or still open ? in that case unlock the request and delete the object and set the IMG setting to what it was earlier and save it against a different request number.
Arun

Transporting changes made to Payment terms

Hi all,
Is the procedure to transport the changes made to payment terms in IMG, different from usual transports? because I was not asked for a request, when I changed the description of the payment term for customers in IMG.Please let me know the procedure.
Thanks in advance
Kumar

Hi,
In the IMG, payment terms, , select the payment terms you want to transport, go to menu-- click on transport --then u will get include in request and delete from request, click on include in request, then u will get the request creation pop up, then create a new request, release and then transport the request.
Hope this helps.
Thanks,
Viswanath

Means of transport change update to SNC5.1

If we change the Means of trasport in r/3 sales order, then this update should be send to SNC5.1 Is this mapping is done thru ORDERCH ?
We have done ORDERSP mappings for order confirmation. Now issue is that when we do the change in r/3 sales order in means of transport that should be updated in SNC.
Thx

Hi Vaibhav
Means of transport is the basic master data and in general it is created in SNC system manually even though the data is available in SAP ERP
The behavior can be changed so that the SNC does not create means of transport from SNC master data and the data should be picked from IDOC with the help of coding.
Now question is how many different means of transport does this customer have? I could imagine many resources, but means of transport is mostly just a few
Upon which basis does the planner decide which means of transport should be taken???
Best Regards
Vinod

How to transport changes made in SE36 - Dynamic Seletion for BRF

Hi Friends,
Please guide me how to transport or assign a request for the changes made in BRF selecion view.
I have assigned and added BKPF-XREF1_HD field for FB03 transaction. Its working fine as per user requirement.
I am facing probelm to assing a transport request for that. I didn't find any transport menu in se36.
So please provide me how to assign a TR which need to import into Production client.
If I have to assign or create a program (standard), then please provide me the program name.
Please reply.
Thanks & Regards
Sankar.
Edited by: sankar babu on Jul 29, 2010 12:26 PM

Solved

Transport changes to a DP MPOS

Similar Messages

Maybe you are looking for