Transport controls on edit mode audition 2

I seem to have lost my transport controls on edit mode for adobe audition 2. How do I get
it back to the way it should be? Also, where can I buy updated versions of adobe audition?

You've probably just covered up the transport controls - it's not that difficult to do. Just shift a few panes around along the bottom, and they'll probably reappear.
You can't purchase a perpetual Audition licence any more - you have to rent the software through the Creative Cloud. If you look around this forum, you will find plenty of comments about that...

Similar Messages

Table Control in Editable mode

Hello All,
I have created an infotype which has a table control. But all the table control lines are in non-editable mode. I would like to have all the lines in editable mode.
Kindly help out.
Regards,
shails

If your internal table contains no record and when you are refering to the table control then all the lines will get disabled.
Now you will be knowing the number of lines your table control displays in singe page...say 10 lines.
So initially in the PBO append 10 initial lines to your itab. then set the property lines of the table control to the total lines of internal table.
Now in pbo capture the user command page down and append 10 initial lines to your itab.
Hope you got the idea.
Now if your itab already has some records , then just set the lines as total record count of your internal table.
Also change the property in the screen attributes for each field of the control

Control display/edit mode of an Assignment Block through code

Hi all,
Requirement : If status in Opportunity is XYZ (BT111H_OPPT/Details - BTStatus/Struct.Act_Status), I need to show items Assignment block((BT111H_OPPT/ItemsList) in display mode. When user tries to go into edit mode, display error saying - "With XYZ status, items are not editable."
Observations so far : In "BT111H_OPPT/OpportunityOVViewSet", method set_view_group_context involves interface "IF_BSP_WD_VIEW_GROUP_CONTEXT" that has methods SET_VIEW_EDITABLE etc., But there is no method to change to display mode. CL_BSP_WD_VIEW_GROUP_CONTEXT uses this interface and has a subclass CL_CRM_WFD_VIEWGRP_CTXT. This subclass has the method SET_VIEW_DISPLAY_MODE.
Question : How to access this method SET_VIEW_DISPLAY_MODE in my requirement? I tried to use the code from this method in my logic, but since attribute 'EDITABLE_VIEWS_TAB' is protected, I'm not able to do anything. Also is there any other way to get solution for my requirement.
Thanks in advance,
Vinoth

HI Vinoth,
if that method is not accessible then try with the below logic.
In the item , fetch the required status(gv_status) which you required .
THen in the item assignment block view, HTM..
check for the diaplpy mode. and store the value in a llocal variable.
lv_disaply_mode = controller->view_group_context->is_view_in_display_mode( controller ) .
if controller->gv_status = 'XYZ'.
lv_display_mode = abap_true.
endif
then pass this lv_display_mode varaible to the configtable display mode Attribute.
<chtmlb:configTable id = "Table"
displayMode = "<%= lv_displaymode %>"
Hope this will help..
Thanks
Sudhansu

Won't play in edit mode

In Audition 1.5 multitrack view plays fine and all functions are usable, however when I try to edit a waveform, the stop, play, pause, play from cursor, and play looped are all greyed out and unusable. I've tried pressing the spacebar as well, but nothing happens. Also, nothing will preview in the organizer.
Nothing like this has happened to me before, and the program was working well for hours today and suddenly did this.

Check that the right Audio Driver and default output paths are selected under Edit/Audio Hardware Setup. I believe I've seen the transport controls greyed out when Audition can't find a valid path/driver for the audio--and you have to select separately in Multirack and Edit view.
Even if you haven't knowingly changed these settings, Vista and Win7 seem to be able to do some weird things.
Bob

Change from edit mode to display mode

Hi ppl
In transaction CO11N , I want to change the quantity (COWB-ERFME) column of a table control
from edit mode to display mode. I created a badi implementation for WORKORDER_GOODSMVT.
This gets triggered before the screen with quantity (COWB-ERFME) is displayed. How to code, to change the column from edit mode to display mode.
I tried using transaction variant and it is working , but I want it to be plant specific. So I m trying badi.
Need ur help to go abt the coding

Hi
U make sure a method of the BADI WORKORDER_GOODSMV is called in PBO while looping table control, if it's so u can use the statament LOOP AT SCREEN.ENDLOOP:
LOOP AT SCREEN.
IF SCREEN-NAME = ....
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Max

Edit Mode control in Ztransaction -- Table control

Hi All,
I have a ZTXN containg records in a table contol.
Have Edit,save and post buttons ons screen.by default the table is in display only mode .when u say edit it comes in editable mode.now i want that even if that TXN is opened in multiple sessions only one person can edit it at a time.
This is urgent .plz help
Thanks,
Sachin

Hi Sachin
Even better, you can get the entire picture [here on SAPHelp|http://help.sap.com/saphelp_47x200/helpdata/en/c2/2d7037ecc92a7ee10000009b38f8cf/frameset.htm]
Regards
Gareth

Transport Controls Borked

This is totally mind boggling. I just booted up Audition which I had been using for months on my laptop. I am running Windows Vista 64-bit by the way. Anyways, I hit play once and then I noticed that the white transport line wasn't moving. I tried to hit stop and it wouldn't work until I clicked the play button again. Then none of the controls worked.
I thought this all odd. I restarted Audition. Same exact thing happened. Basically once I hit play or record and stopped it, none of the transport controls would work. Using multi-track mode or edit mode made no difference. Reloading files made no difference.
Finally I uninstalled. I removed every trace of Audition including a registry clean. When I re-installed it STILL did not work.
What. The. Freak.

Borked? Interesting word to use for it - not come across that one before!
Anyway, I have to tell you that just about the only thing that stops the transport working correctly is the interface to your sound device. If this is in any way misconfigured, then the first thing that stops is the transport - even if the device appears to be reported correctly as being present. And the symptoms you are describing fit a driver failure pretty well...
So, if it's an external device then reload at least the ASIO drivers for it, and set it up again in the audio hardware section of Audition. If it's an internal device the same thing applies, but you'll probably have more fun locating the correct driver, and it won't be ASIO, so you'll have to make sure that you either use the Audition Windows Driver, or better still, ASIO4ALL which is free, and will give you better fault indications.
If you have more difficulties, report back.

STMS Extended Transport Control

Anyone ever used the Extended Transport Control in STMS? The team at my current project wants to setup a client landscape like this (not the complete diagram)...
DEV100 >--+----+--> QA100 >-----> PROD100
          |    |
DEV110 <--+    +--> QA120
          |    |
DEV120 <--+    +--> QA121
               |
               +--> QA700
When a transport is released in DEV100, it will go to some of the clients in DEV and QA all the time, but in other clients it will be in a more controlled manner (e.g., on demand only).
I've always done multi-client transports at the o/s level using customized scripts etc to import into various clients, however since this client will be using ECC 5.00 and BW 3.5 (and Solution Manager 3.1) I'd like to get them setup from the start with the STMS functionality. It appears to me that I need to use the TMS Extended Transport Control, and I'm just wondering if anyone has a) any experience with it (both positive and negative), and b) any quick start-type information on how to configure TMS for a setup similar to the above.
Thanks in advance for any advice

I have created 3 following client ids.200, ids.300, and ids.400 in my IDES system with the SAP-USER profile.
Login to 000 client with SAP* user for the following configuration in the Transport Management System, STMS---go to Overview click on the Transport route, Your TMS configuration will be display in the center window if done.
Press F5 or click on Pencil Icon to switch to Configuration editing mode, Click on Edit menu then click on the Transport Target Group to define the multiple client of single or multiple system which exists in your landscape.
I will prefer to work on Hierarchical list Editor Mode instead of Graphic mode, to change from graphic mode to Hierarchical, go to setting menu click on transport route editor and select the Hierarchical List Editor Mode, setting will take effect to go to back and click on transport route again.
You have to Switch Editing mode before continue to define the consolidate route, go to Edit Menu, Transport Route and click on Create, Transport route window will display with the Consolidate / Deliver route options. Select the Consolidate Route and click on Extended Transport Control (F6) button down.
Integration system ..Will be your current or development system as source system
Transport LayerEnter the default layer which has been created with your integration system.
Consolidation TargetSelect your target group which created earlier.
Save the Configuration, activate and distribute the configuration across all systems.
Your system is ready to transport the requests to multiple systems and multiple clients
Regards
Anwer Waseem
SAP BAISS

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

Can't open photos in edit mode

I can;t open photos in edit mode in iPhoto '08. When I double click on a photo the main window remains blank (no "!" no"?"). This problem occurs with every photo in the library. My permissions are OK. I've also tried setting the preferences to edit in Photoshop but double clicking on the photos then still accomplishes nothing.

Steve:
Do you get a blank white window in the edit mode? If so that may mean you do not have access to the files. Try the following:download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
FYI:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Cannot open VI file in edit mode.

I cannot open a VI project that I was working on. Every time I try to open the file it gives me a message that "not enough memory to complete this operation".
This is a large project and I need to be able to access the block diagram.
This happens when I try to open it in edit mode.
Thanks.
Message Edited by Minguccio on 01-06-2006 11:41 AM

Minguccio,
I've done some poking around and may have found some useful information. This error will ocurr if you have too many (and I mean a ton) of controls on the front panel. I haven't heard of this error since LabVIEW 5.1 though and we've upgraded the number of controls you can have on your front panel since then. However, try deleting some controls from your front panel to see if this helps out.
My investigation also lead me to tcp errors. Are you using tcp\ip anywhere in your programming? I found this discussion that may help out if that's the case.
Let us know what you find.
Best Regards,
Chris C
Applications Engineering
National Instruments
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

How can labview update the string control (text-edit box) after we have pressed the carriage return key on the keyboard during text-editing within that box?

Dear readers,
I have been trying to work out how to get labview to detect the event when a 'string' control has been modified, where the user has finished editing the string either by 1) pressing the enter key on the keyboard, or by 2) taking the focus away from the string control again. For example.. if I use the mouse to click on the string control and then I type 1234 into the box, I would like to have a routine that does something once the user hits the Enter key of the keyboard, or when the user takes the focus away from the string control again by clicking on something else. I would like the routine to respond even when the user didn't change anything in the text box (such as when we mouse-click on the edit box to go into edit mode, and then mouse-click on something else to remove the focus with no changes to the contents in edit-box).
The purpose of my routine is to have a edit-box for a user to change for example the centre-frequency of a vector network analyser, so that the centre-frequency of the network analyser can change once the user finishes entering a new value in the text-edit box by hitting Enter key after the number is keyed in. Even if the user has clicked on the edit box, but changes their mind by mouse-clicking on something else to remove focus from the edit box, I would still like labview to detect the event when the control loses focus, so that the centre frequency can be updated anyway (to the same value that was already in the edit box).
So far, I've tried set the string control option to 'limit to single line', so that I can try to scan for a carriage return .. '\n' ... pattern in the string. Unfortunately this doesn't work because labview doesn't seem to attach the '\n' to the end of that single line.
Could someone please suggest ways to set a flag when a user hits Enter during text-edit mode of a string control, or when focus has been removed from the string control?
While I've only described my problem for controlling a single control parameter on the gpib device, I'd like to make this feature work so that I can do the same kind of thing with other control parameters as well.
Thanks so much in advance.
Kenny

Hi Kenny,
instead of using the event structure, you can directly achieve to what you want by the KeyFocus property of the string control.
- Enable Limit to single line option
- Create the property KeyFocus in read mode and connect an indicator
Each time you click on the string to modify it KeyFocus is True; when you click away or hit Enter KeyFocus is False.
You can toggle your settings when KeyFocus changes from True to False.
Alberto

Transport control program tp ended with error code 0208

Hello
I installed minisap NW2004s on XP/SP2 VMWARE 4.5. The installation it self's works fine, but have some problems in the stms. when i call the transport queue there appears an error as follow:
System   NSP              Command TMS_MGR_READ_TRANSPORT_QUEUE
Client   000              Service Transport Service
User     TMSADM           Start    Online
Date     12.10.2006       Function TMS_TP_SHOW_BUFFER
Time     07:13:13         Message TP_REPORTED_ERROR
Transport control program tp ended with error code 0208
Errors: error in transportprofil (param missing
unknown,.
Any Idea? Thanks for your help.
Regards, George

Hi
You can edit the parameter profile using RZ10 and RZ11. You should not copy but manually edit the parameters. Also you need to make a consistency check so that the parameters will be copied to the database from the OS level. You will find an option to perform consistency check in RZ11.
Hope that helps.

Transport control program tp ended with error code 0232

Dear all
I've change password for user SAPSR3 by mistake
the result from brtools is "password changed successfully in table OPS$CAPADM.SAPUSER for user SAPSR3"
after that i can not transport to my production client
with error : TP_REPORTED_ERROR
Transport control program tp ended with error code 0232
Can anybody help me please
thanks & rgds,
Della

I've changed my SAPSR3 password to sap but still error
this is the error log from Check Transport Tool
DB Connect            Link to database failed
This is tp version 372.04.70 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: Connect to CAP failed (20091217174435, probably wrong environmen
TRACE-INFO: 1: [dev trc     ,00000] Thu Dec 17 17:44:35 2009
0.007435
TRACE-INFO: 2: [dev trc     ,00000] DlLoadLib() success: dlopen("/usr
0.007448
TRACE-INFO: 3: [dev trc     ,00000] Got
LIBPATH=/usr/sap/CAP/DVEBMGS32/exe:/usr/sap/CAP/DVEBMGS32/exe:/usr/lib
lient from environment
TRACE-INFO: 4:
0.008053
TRACE-INFO: 5: [dev trc     ,00000] Oracle Client Version: '10.2.0.2.
0.008140
TRACE-INFO: 6: [dev trc     ,00000]    >oci_initialize(con_hdl=0, char
0.008158
TRACE-INFO: 7: [dev trc     ,00000] application info callback registe
0.008173
TRACE-INFO: 8: [dev trc     ,00000] OCIEnvCreate(mode=16384=OCI_UTF16
0.010330
TRACE-INFO: 9: [dev trc     ,00000] Client character set UTF16 -> UTF
0.010421
TRACE-INFO: 10: [dev trc     ,00000] Client NLS setting (OCINlsGetInf

Transport control program tp ended with error code 0016

Hello colleagues,
We are getting the following error when exporting system HRP to HRI:
Transport program TP started successfully for HRPKX00005 21:25:45
|   Transport control program tp ended with error code 0016
|   Error exporting request HRPKT00005 00:59:50
|   Program ended with error or warning, return code: F
|   Runtime (seconds)         :         13.876
|   End of processing: 00:59:50
Please could you kindly help us to solve the issue?
Thanks in advance.
Best regards
Edited by: Víctor Barahona Cimas on Nov 12, 2009 3:33 PM

ok thanks

Transport controls on edit mode audition 2

Similar Messages

Maybe you are looking for