Transport datasource 0FI_AP_4 on R3 gets warning msg
RSA6 on R3 and select the datasource 0FI_AP_4, click the truck picture icon which is "Transport datasource", get a warning msg:
"Warnings have occurred (see log)", click the question mark for log, but still get the same short msg. What could be the reason?
The reason why we are doing this is that we found a new field added to the structure and correspondingly the datasource fails to show up in the target system after transported.
Thanks
Hi,
If your ES in DEV has more filed than ES of QA/PROD , then yiou need to release and import the transport request of that change to ES.
Without tranporting the change to ES first ,you are trying to transport the request of DS(which internally depends upon the ES) ,so you are getting warning.
With rgds,
Anil Kumar Sharma .P
Similar Messages
-
Cannot move files to Trash. Get warning msg instead
Lion 10.7.5 Recently found that I can no longer move files to Trash.
Instead I get following warning message
If select "Delete" ... file is deleted and does not appear in 'Trash'
Any ideas on how to fix thisThat's a problem with the Trash. In order to fix the problem, there are different methods. Read > http://www.thexlab.com/faqs/trash.html#Anchor-Files-46919
-
Warning Msg - While checking Mulitproviders
Hi Frds,
When i am trying the check the mulitproviders, we are getting warning msg. Below is the warning msg which we getting.
Error messages from point of view of OLAP processor:
Message no. R7I127
Now we have upgrade our patch level from 16 to 21.
Kindly can anyone give me some solution to overcome these warning msg.
Thanks
YuviHas the MultiProvider ever been activated in the past? If you activate it, and it hasn't been activated previously, you'll get this message from time-to-time (another one of those "undocumented features"). After actiavting it, go back into the MultiProvider in edit mode and run a check on it. It shouldn't throw that warning anymore.
-
Short dump GETWA_NOT_ASSIGNED while transporting Datasource in BI 7.0
Hi Friends,
I am getting an error, while trying to transport Datasource into quality system. The Transport request log says that "Program terminated (job: RDDEXECL, no.: 11372100)"
If I check the log in SM37 of target system it gives following steps
29.06.2007 11:37:21 Job started
29.06.2007 11:37:21 Step 001 started (program RDDEXECL, variant , user ID DDIC)
29.06.2007 11:37:21 All DB buffers of application server bdhp4488 were synchronized
29.06.2007 11:37:30 SQL: 29.06.2007 11:37:30 DDIC
29.06.2007 11:37:30 CREATE UNIQUE INDEX "/BIC/B0000566001~0" ON
29.06.2007 11:37:30 "/BIC/B0000566001" ("REQUEST", "DATAPAKID",
29.06.2007 11:37:30 "PARTNO", "RECORD") PCTFREE 10 LOCAL INITRANS 002
29.06.2007 11:37:30 TABLESPACE PSAPSR3 STORAGE (INITIAL
29.06.2007 11:37:30 0000000016 K NEXT 0000000160 K MINEXTENTS
29.06.2007 11:37:30 0000000001
If I see the short dump in ST22 in target system (quality) The I get error
"Runtime Errors GETWA_NOT_ASSIGNED"
Could somebody help me in resolving this?
Thanks and regards,
BalarajThanks Edwin,
My issue is still not resolved.
Now the error that I am getting while transporting the Transformation is
Program terminated (job: RDDEXECL, no.: 12091300)
The SM37 job log says that
"Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server bdhp4488 were synchronized
ABAP/4 processor: GETWA_NOT_ASSIGNED
Job cancelled"
When i see the dump in ST22. It says that it could not find entry in one of the tables
" READ TABLE p_t_mapping ASSIGNING <fs_map>
WITH KEY target_stepid = 0
targetsegid = <fs_posit>-rulesegid
targetposit = <fs_posit>-ruleposit
targetid = 0.
Sy-subrc <> 0 for this read.
Could you please advise?
Thanks and regards,
Balaraj -
Hate iTunes 11. Reverted to the old version. Now I get a msg when I click to open iTunes stating, "The file "iTunes Library.itl" cannot be read because it was created in a newer version of iTunes" and it will not open. HELP!! How can I revert the library as well?
I hate iTunes 11 too... and I also want to revert to previous version. But Apple seems to be so incredibly customer-friendly these days that is quite deliberately not publishing clear/simple revert instructions. I think it's a disgrace that Apple removed Cover Flow without warning people who are tempted to upgrade. Absolute disgrace. And now we're stuck with this piece of ..
-
had my iphone with me out by the pool... it was on the side face down exposed to the sun... warning msg came up with a yellow triangle with an ! in the middle and the word temperature above it... seems to be working fine now... but was playing my ipod at the time and it just stopped playing...
If the phone gets too hot, it will shut itself down. See p. 132 of the manual... http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
-
Supress warning msg during RRI
We have a query that jumps to R/3 tcode. when we try to jump, for some document no's the jump goes smooth .. for some other doc's, it throws a warning msg saying that the infosource is not linked to the source system. this happnes with some of the docs only. But the jump does go thru to R/3.
I want to supress the warning msg during the jump. I tried in RSRT, but it doesnt help. the error code i get is RSBBS206. where do i have to exactly supress this warning?
Any pointers or clues would be appreciated.
thanks,
VoodiHi Vodi,
In RSBBS, go to the sender query in change mode. There should be a tab in the middle column where you have to give your infosource name..
For. eg If you want to jump from Cost centre report (BW) to Masterdata transaction in R/3, you ust assign this particular infosource in RSBBS settings..
Hope it helps. -
Warning msg. when trying to activate MP
guys,
I am trying to activate MP, and i am getting following Waring msg. ! what does it mean ? and how serious it it ?
"The InfoProvider properties for ZCIA_M05 are not the same as the system default
Message no. BRAIN376"
thanksyes i did assign all the infoobject. i could activate it too, but before i could activate it, i got a warning msg.
still, i ignore those and activate it.
but i wasnt sure i serious it. Also i checked MP's properties and its all the same( like other MPs).
But, i thought let me get some information from Experts about that worning !!!
let me know if you have any idea about it.
Also, When i was trying to Activate MP again, it was asking like " its already active, do u still want to active" and if i say yes, it
gives me an error msg. " MP is not yet Locked"
Do i need to Lock it ????? what is that ??
thanks -
When I'm trying to jump from a source report to target query via RRI, i get a warning msg (thought the query runs). I want to supress the msg.
I tried supressing the msg in source query, target query and both of them together. Still the msg is being displayed. Where do I need to supress the msg if its during RRI process?
The variable and the hierarchies being used for cost center is the same in both the queries. Any thoughts?
Error msg:
Invalid filter on 0COSTCENTER: Filter changed
Message no. BRAIN502
Diagnosis
You tried to filter on a characteristic with active presentation
hierarchy by a node of another hierarchy.
This can only be done by switching the hierarhcy or for example by using
the report/report interface.
System Response
The filter is not evaluated for the characteristic, but removed instead.
Procedure
Procedure for System AdministrationThanks guys, I figured it out.
Message was edited by:
voodi -
Report to Report Interface warning msg
Hi,
I am getting "Incompatible for target selection for fiscal year" warning msg in SAP BEX.I am using same variable in my source and target system to select fiscal year.
How to supress this warning message?
thanks
venkiiIf your report is working fine as per expectation in RRI, and your requirement is to supress the warning message, you can set the global setting of the workbook to supress any warning messages.
Question:
Do you have any customer exit on this variable?
- Danny -
Error with transporting datasource
Hello,
I have an issue activating a datasource. I created a generic datasource called 'ZHIP_TD_CLOSE_INV_BALANCE' within BW - i.e the source is BI and NOT R/3. I created transformation from datasource to Cube and loaded data. Everything is working fine. Now when I transport the datasource from Dev to Quality the transport failed. The error log says 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310' & 'Error when activating DataSource ZHIP_TD_CLOSE_INV_BALANCE WP1CLNT310'. I do not have an infosource to begin with. So then when I go and try to activate the datasource in Quality, I get the same message i.e. 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310'. How do I fix the error and get the transports through? Remember, the existing config works fine in Dev. Thanks for your help in advance.
Thanks
Nishawhat objects are you trying to transport along with the data source ? If you have transfer rules along with this request then might be you would get this error. Also check if your source conversion is maintained correctly. you can check that in RSA1 > Tools > Conversion of Source system names.
Here maintain the system conversion. Once done, recreate a transport request with only data source and transport. Once done replicate and transport your other objects. -
Hi there,
I'm using some code from way back and I'm trying to use it within a newer project.
The original code is as follows:
import mx.styles.CSSStyleDeclaration;
import mx.styles.StyleManager;
protected static function classConstruct ():Boolean {
if (!StyleManager.getStyleDeclaration("Page")){
var defaultStyles:CSSStyleDeclaration = new CSSStyleDeclaration();
for (var i:String in DEFAULT_STYLES){
defaultStyles.setStyle(i, DEFAULT_STYLES[i]);
StyleManager.setStyleDeclaration("Page", defaultStyles, true);
return true;
This gives me a couple of Warning !
Description Resource Path Location Type
3608: 'getStyleDeclaration' has been deprecated since 4.0.
Please use 'IStyleManager2.getStyleDeclaration on a style manager instance'.
Page.as line 146 Flex Problem
I have been trying to change it, but I get Error Msg's now !
import mx.styles.CSSStyleDeclaration;
import mx.styles.IStyleManager2;
protected static function classConstruct ():Boolean {
if (!IStyleManager2.getStyleDeclaration("Page")){
var defaultStyles:CSSStyleDeclaration = new CSSStyleDeclaration();
for (var i:String in DEFAULT_STYLES){
defaultStyles.setStyle(i, DEFAULT_STYLES[i]);
IStyleManager2.setStyleDeclaration("Page", defaultStyles, true);
return true;
Any help would be very much appriciated. regards aktell2007Get a style manager instance by calling styleManager on a UIComponent or calling StyleManager.
getStyleManager(moduleFactory);
Each Application/Module has a style manager so using the top-level application will only work correctly if you do not use modules or sub-applications. Otherwise if a module calls code and sets a style into the top-level style manager, the module will be pinned in memory by that reference.
As Alex said, put a defaults.css in your library.swc to set default styles. Look at how it is done in framework.swc and spark.swc.
-Darrell -
Phishing data filled in click send warning msg from firefox is data compromised
Phishing email when clicked gave a page where data was filled in, clicking next, gave "forged web site" warning msg. Did the data get to the bad guys?
Retrying and link on the email now only gets forged web site screen
url from blocked message is: public1.landforsaleinmarvin.c....Hi Feer56,
Reading the posts you supplied did answer the question. Was the data sent to the phishers?
Response to phishers: fill form > click next > then mozilla blocked
Question: Was I just blocke from further proceeding to the bad web site warned?
Did the data from form reach the bad guys, or was it stopped when the warning came up -
iTunes no longer works on my Windows VISTA system. Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114. Same msg, or one that says unable to install, when trying to update or reinstall iTunes. iTunes worked well up until about a month ago when this error msg starting appearing.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
"Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it lauches". What do I do? I get the msg each time I try to open it.
It isn't a file, it's a folder. It will have the same name as your catalog, but will have the extension data. It will be in the same folder along with your catalog. If you need to use the search feature to search for *.lrdata.
Maybe you are looking for
-
Upgraded to 10.5 and FCP thinks that its running on a different computer
I've had FCP for about 5 years now, no problems. I recently upgraded to OS10.5 FCP worked fine until I tried to go to compressor and compressor would not work (different forum, I know) anyway I got compressor working again by re-installing just compr
-
Hi Support, I am doing archiving project. Now I am doing tests in development system. The archiving object is MM_EKKO, archiving location is at a directory in same server. In variant I mentioned a single purchase document. The background job is finis
-
Nokia 5800 does not connect to 3g
Hello Everybody, I have just switched to 3g services here in chennai,india(BSNL btw) and i am having issues with my 5800 to connect... If i select UMTS, there is no signal for the network,whereas if i select dual mode i get only GSM. I have tested th
-
Problems with Grub, Dualbooting, and a software raid
Been searching through google and any forums i could find regarding a possible fix and can not find anything that works. I have 2 Hard drives, First one is windows, second one is Archlinux. They are setup through a software raid and i can not get gr
-
SanDisk Card Reader stopped working with OS X 10.4.7
I have an older SanDisk single smart card reader, model SDDR-55. It worked fine with 10.2, but I cannot seem to get it to work with 10.4.7. When I reinstall the SanDisk driver (the most recent download available from them) and restart, I get an error