Transport Error: Characteristic is blocked by conversion

Hello Everyone,
I had created an Info Object in my development system with some attributes and also compounded with certain other IO. After loading it, I transported it to Quality.
Then I modified the Info Object in development system by adding some navigational attributes and some more compounding. I loaded it again, tested it and then transported it. But it is giving an error now. The log says " The conversion of master data tables from characteristic ZABC is not completed. Characteristic ZABC can not be changed until this conversion has been successfully carried out."
Steps I did to resolve the issue:
1) Deleted the data from Q. Adjusted the tables using SE14 in Q. Collected the object in a new request and transported it again. It dint work.
2) I checked the consistency of tables for this Info Object using SE14. Everything was consistent. There is a SAP Note that talks about this issue: 1248769. But for that I need Basis support.
Why am I facing this problem? Is there a consistent way to solve the issue because this might happen with any info object as we keep modifying the info object's over period of time.
Regards,
Abhishek

It may be because of conversion lock in the characterstic. You can check it in "Extras --> Remove conversion lock" in the characterstic.

Similar Messages

  • Characteristic is blocked by conversion (status 4)

    Dear all,
    There is a infoobject had many nav attributes,and much data in master data table.
    And then,i change nav attributes from time-dependent to notime-dependent.
    when i active it, there was error,and is blocked by conversion.
    So, status of the char is inactive, not executable.
    I Delete lock in SM12 ,and it didn't help. Locks appear again.
    error message shows the following:
    Internal Activation (InfoObject )
    Preprocessing / Creation of DDIC Objects for InfoObject ZCO_ELMNT
    Characteristic ZCO_ELMNT : Converting the Master Data Tables
    Table /BIC/PZCO_ELMNT: Error in creating index 0 (2)
    Resetting of Incorrect Objects Back to the Active Version (InfoObject )
    Preprocessing / Creation of DDIC Objects for InfoObject ZCO_ELMNT
    Characteristic ZCO_ELMNT is blocked by conversion
    How to active the IO,or delete the block from IO?
    Best regards,
    Plato

    I was facing this problem in bi 7.0 . the object can be unlocked by using TCODE RSA1OLD.
    Go to RSA1OLD.
    Double click on the object.
    then from menu, choose EXTRAS->REMOVE CONVERSION LOCK.
    This will remove the lock and will allow you to change the object.
    Change, save and activate the object. (You can skip this and can do from RSA1 also, just remove lock in this case)
    Change and save the object from here and come out of your all transactions. (Log Off from system)
    Now, as you have changed the object from RSA1OLD T-Code , it might not be type compatible for RSA1.
    So, go to RSA1, you will find that object unlocked. Change the same object (For sake of formality) and save and activate the object.
    This will create the active version of object in RSA1.
    Your problem is solved now.
    Hope this will work for you.

  • "Characteristic is blocked by conversion" -- "No Nametab Exist"

    Hi all,
    I have a serious problem. I have an infoobject with master data time dependent. I have switched one field from "Time-Dependent" to "not Time Dependent". In development environment no problem arises.
    When transporting in quality environment, the Change request goes in Red with following message:
    Table /BI0/PXXX: Error in creating index 0 (2)
    Characteristic 0XXX is blocked by conversion
    I check in quality and I see that the /BI0/QXXX table is not active. When I try to activate it, the following error message appears:
    No active nametab exists for /BI0/QXXX
    Termination due to inconsistencies
    Table /BI0/QXXX (Statements could not be generated)
    Any ideas?
    Thanks,
    Gianluca

    OSS Note 211492

  • Characteristic 0MATERIAL is blocked by conversion

    Hi experts,
    I am transporting the 0MATERIAL changes into production (after extra navigational attribute added), while importing into production system, its giving below error message.
    Characteristic 0MATERIAL is blocked by conversion
    the new navigational attribute is active in production system.
    how to resolve this issue?
    regards
    venuscm

    Hi,
    Kindly review this SAP Note 1177708 - CHECK: Change time-dependent attribute to time-independent
    For existing data, a time-dependent attribute can only be changed to time-independent if there is exactly one attribute value for each characteristic value in the existing data. Even though there are several attribute values, the check may in some cases report values to be unique. However, the characteristic activation terminates. The subsequent inconsistent state can be cleared only manually.
    Please also read & follow the recommendations in SAP Notes:
       325296   Conversion lock: Characteristics cannot be edited
       451773   Inactive characteristic cannot be activated (inact.
    Rgds,
    Colum

  • Characteristic 0BPARTNER is blocked by conversion(Status 6)

    Hi
    I have added added 3 attributes to 0bparnter while activating error came.i removed 2 atributes and activated againg i got  error :Characteristic 0BPARTNER is blocked by conversion(Status 6) .infoobject has data which loading from crm.i found sapnote_0000325296 can i apply.do i need delete data or without also possible to apply this note.

    Hello,
    Adding an attribute should not be a problem in any infoobject.
    You can delete the data from the infoobject if its not used in any cube or if the cubes where its used are not loaded or contains no data.
    Otherwise you will have to delete the data from the cubes first and then from infoobject.
    This will allow you to change the infoobject.
    Even the OSS notes looks old one..so just do a verification if its already applied or not.
    Regards
    Ajeet

  • Characteristic ZEMPLYETD is blocked by conversion

    hi
    i am geting this error while activating of time depandant of employee. ple let em know
    Characteristic ZEMPLYETD is blocked by conversion

    Hi,
    check below link,
    R7476 - Characteristic OMATERIAL is blocked by conversion
    Regards,
    Viren

  • Characteristic 0TCTUSERNM is blocked by conversion

    Dear All,
    I am trying to activate the infoobject 0TCTUSERNM but it is giving error as below,
    Characteristic 0TCTUSERNM is blocked by conversion
    Message no. R7476
    Diagnosis
    The conversion of master data tables from characteristic 0TCTUSERNM is not completed.
    System Response
    Characteristic 0TCTUSERNM can not be changed until this conversion has been successfully carried out.
    Procedure
    Activate characteristic 0TCTUSERNM. The block will be removed following a successful activation.
    When I activate the infoobject, it is giving short dump.
    Does anyone have faced such issues?
    I tried force conversion in SE14 and also tried to activate and adjust tables in SE14 for this infoobject. It didn't helped.
    Any pointers to solve the issue will be helpful.
    Regards,
    Niraj

    Hi,
    I tried both the options suggested by you. Deleted the table from SE14 and adjust and activate. The issue did not resolved.
    i tried activation in background and job was getting cancelled.
    To solve the issue I went to infoobject> Extras>Remove conversion lock
    it gace a warning and then activated manually.
    Thanks for all the suggestions.
    Regards,
    Niraj

  • 0Material is blocked by conversion when transporting from Dev to quality Bo

    Hi All,
    I am transporting omaterial , I had selected with data flow before option while creating the transport request , when importing the request i am getting the following error in the quality box" 0Material is blocked by conversion "i had already transported the table view ( t ocde osml)
    Please guide me to resolve this issue .
    thanks in Advance
    suitable answer will be awarded

    Hi Krishna,
       Goto SE14, Give all the relevant tables one by one and Delete data and acivate.
    1. SE14
    2. Eneter table like /BI0/PMATERAL
    3. On the next screen select the option Delete Data and Activate.
    4. Repeat step 1 to 3 for all the other tables.
    To find out all the tables:
    1. Goto Se14
    2. /B10/*Materal
    3. press F4.
    Hope this helps.
    best regards,
    Kazmi

  • Characteristic USITMMPE is blocked by conversion

    I tried to activate an InfoObject and I got:
    Characteristic USITMMPE is blocked by conversion. Now I am unable to make any change to this InfoObject. How to unblocked it? Thanks.

    Did you change the data type/DDIC for the info-objects. If yes, then delete the data first before acitvating it
    refer: info object  activation problem

  • Characteristic Infoobject is blocked by conversion

    Dear All,
    Getting message as(Characteristic Infoobject is blocked by conversion).
    Unable to activate the infoobject.
    Does anybody faced the issue before.
    Thanks.

    Did you change the data type/DDIC for the info-objects. If yes, then delete the data first before acitvating it
    refer: info object  activation problem

  • Characteristic 0BPARTNER is blocked by conversion

    Hello,
    I´m trying to activate 0BPARTNER characteristic but it is blocked by conversion. System sais that problem will be solved activating 0BPARTNER but it is impossible to do it:
    Message no. R7476
    Diagnosis
    The conversion of master data tables from characteristic 0BPARTNER is not completed.
    System Response
    Characteristic 0BPARTNER can not be changed until this conversion has been successfully carried out.
    Procedure
    Activate characteristic 0BPARTNER. The block will be removed following a successful activation.
    But I can´t activate it.
    Best regards,
    Carmen

    I had a colleague reinstall the object from BCT- additionally he also activated a few related datasources in R/3 (RSA5) and then activated 0BPARTNER and it was successful!!
    I guess I was facing some authorization glitches due to the recent upgrade to 2004s- note that my colleague and I have the same authorizations- and the exact above steps did not work for me but worked for him!
    But thanks all for your valuable suggestions and interest in this thread.
    This issues is now closed.
    regards
    Naresh

  • Characteristic 0EMPLOYEE is blocked by conversion

    Hi Gurus.
    I added 2 Attributes to 0EMPLOYEE infoobject and made them navigational. Now, when I try to activate 0EMPLOYEE it times out and I get this message when I come and try to enter edit mode for 0EMPLOYEE:
    Characteristic 0EMPLOYEE is blocked by conversion
    Message no. R7476
    Diagnosis
    The conversion of master data tables from characteristic 0EMPLOYEE is not completed.
    System Response
    Characteristic 0EMPLOYEE can not be changed until this conversion has been successfully carried out.
    Procedure
    Activate characteristic 0EMPLOYEE. The block will be removed following a successful activation.

    Hi Dinah,
    Yes, I was able to fix this.
    You need to do the following. In BW, go to tcode SE14 (ABAP Dictionary: Database Utility). Enter the table name that is causing the problem in the Obj. name field. In my case that was the SID table, e.g. /BIC/YEMPLOYEE. You can display all the infoobject tables by typing in EMPLOYEE  (your InfoObject name) and F4 for lookup.
    Once you type in the correct table name, click on Edit button. On another screen, click on Delete data radio button. Then do an Activate and adjust database. If that does not fix it ..also ..come back and click on Delete database table button.
    Hope this helps.
    Thanks

  • Error In InfoObject Activation - Characterstic Blocked By Conversion

    When I am going to Activate 0APO_PROD  the error message is
    1. The SID table for 0APO_PROD cannot be filled
    2. The InfoObject 0APO_PROD is Blocked by Conversion.

    Hi
    just on trial basis u can try tcode se14 delte the sid table recreate it and then activate the infoobject
    thanks
    puneet

  • Transport error 12

    Hi,
    I am getting a transport error 12 while importing a request.
    Some transports are getting transported while some are not and are ending up with error 12.
    Here are the slog
    ERROR BD1K902473           BP1 R 0012 20100114030753           
    STOP  tp_getprots          BP1 R      20100114030809                
    STOP  EXECUTION OF REPORTS BP1 R      20100114030810              
    ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    STOP  imp single           BP1   0012 20100114030811            
    START imp single           BP1        20100114030842      
    Regards,
    Visshwas

    Here it is
    STOP  tp_getprots          BP1 V      20100114002628              VENKATEV     STRDS1502 20100114002456     
    STOP  SET VERSION FLAGS    BP1 V      20100114002629              VENKATEV     STRDS1502 20100114002456     
    START EXECUTION OF REPORTS BP1 R      20100114002641              VENKATEV     STRDS1502 20100114002456     
    START tp_getprots          BP1 R      20100114002642              VENKATEV     STRDS1502 20100114002456     
    STOP  tp_getprots          BP1 R      20100114002710              VENKATEV     STRDS1502 20100114002456     
    STOP  EXECUTION OF REPORTS BP1 R      20100114002711              VENKATEV     STRDS1502 20100114002456     
    STOP  imp single           BP1   0008 20100114002712              VENKATEV     STRDS1502 20100114002456     
    START INFORM SAP-SYSTEM OF BP1 Q      20100114002713              VENKATEV     STRDS1502 20100114002456     
    START tp_getprots          BP1 Q      20100114002713              VENKATEV     STRDS1502 20100114002456     
    STOP  tp_getprots          BP1 Q      20100114002722              VENKATEV     STRDS1502 20100114002456     
    STOP  INFORM SAP-SYSTEM OF BP1 Q      20100114002723              VENKATEV     STRDS1502 20100114002456     
    START imp single           BP1        20100114004455              VENKATEV     STRDS1502 20100114004453     
    INFO  TBATG CONVERSION OF  BP1 N      not needed                  VENKATEV     STRDS1502 20100114004453     
    START MOVE NAMETABS        BP1 6      20100114004457              VENKATEV     STRDS1502 20100114004453     
    START tp_getprots          BP1 P      20100114004458              VENKATEV     STRDS1502 20100114004453     
    STOP  tp_getprots          BP1 P      20100114004500              VENKATEV     STRDS1502 20100114004453     
    STOP  MOVE NAMETABS        BP1 6      20100114004501              VENKATEV     STRDS1502 20100114004453     
    START MAIN IMPORT          BP1 I      20100114004502              VENKATEV     STRDS1502 20100114004453     
    STOP  MAIN IMPORT          BP1 I      20100114005903              VENKATEV     STRDS1502 20100114004453     
    INFO  TBATG CREATION OF EN BP1 n      not needed                  VENKATEV     STRDS1502 20100114004453     
    START SET VERSION FLAGS    BP1 V      20100114005908              VENKATEV     STRDS1502 20100114004453     
    START tp_getprots          BP1 V      20100114005911              VENKATEV     STRDS1502 20100114004453     
    STOP  tp_getprots          BP1 V      20100114005936              VENKATEV     STRDS1502 20100114004453     
    STOP  SET VERSION FLAGS    BP1 V      20100114005938              VENKATEV     STRDS1502 20100114004453     
    START EXECUTION OF REPORTS BP1 R      20100114005947              VENKATEV     STRDS1502 20100114004453     
    START tp_getprots          BP1 R      20100114005949              VENKATEV     STRDS1502 20100114004453     
    ERROR BD1K902473           BP1 R 0012 20100114010005 MANJUS       VENKATEV     STRDS1502 20100114004453     
    STOP  tp_getprots          BP1 R      20100114010041              VENKATEV     STRDS1502 20100114004453     
    STOP  EXECUTION OF REPORTS BP1 R      20100114010043              VENKATEV     STRDS1502 20100114004453     
    ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    STOP  imp single           BP1   0012 20100114010049              VENKATEV     STRDS1502 20100114004453     
    START imp single           BP1        20100114010856              VENKATEV     STRDS1502 20100114010848     
    INFO  TBATG CONVERSION OF  BP1 N      not needed                  VENKATEV     STRDS1502 20100114010848     
    START MOVE NAMETABS        BP1 6      20100114010901              VENKATEV     STRDS1502 20100114010848     
    START tp_getprots          BP1 P      20100114010902              VENKATEV     STRDS1502 20100114010848     
    STOP  tp_getprots          BP1 P      20100114010911              VENKATEV     STRDS1502 20100114010848     
    STOP  MOVE NAMETABS        BP1 6      20100114010914              VENKATEV     STRDS1502 20100114010848     
    START MAIN IMPORT          BP1 I      20100114010917              VENKATEV     STRDS1502 20100114010848     
    STOP  MAIN IMPORT          BP1 I      20100114011713              VENKATEV     STRDS1502 20100114010848     
    INFO  TBATG CREATION OF EN BP1 n      not needed                  VENKATEV     STRDS1502 20100114010848     
    START SET VERSION FLAGS    BP1 V      20100114011724              VENKATEV     STRDS1502 20100114010848     
    START tp_getprots          BP1 V      20100114011725              VENKATEV     STRDS1502 20100114010848     
    STOP  tp_getprots          BP1 V      20100114011730              VENKATEV     STRDS1502 20100114010848     
    STOP  SET VERSION FLAGS    BP1 V      20100114011731              VENKATEV     STRDS1502 20100114010848     
    START EXECUTION OF REPORTS BP1 R      20100114011741              VENKATEV     STRDS1502 20100114010848     
    START tp_getprots          BP1 R      20100114011741              VENKATEV     STRDS1502 20100114010848     
    ERROR BD1K902473           BP1 R 0012 20100114011757 MANJUS       VENKATEV     STRDS1502 20100114010848     
    STOP  tp_getprots          BP1 R      20100114011816              VENKATEV     STRDS1502 20100114010848     
    STOP  EXECUTION OF REPORTS BP1 R      20100114011817              VENKATEV     STRDS1502 20100114010848     
    ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    STOP  imp single           BP1   0012 20100114011819              VENKATEV     STRDS1502 20100114010848     
    START imp single           BP1        20100114013808              VENKATEV     STRDS1502 20100114013757     
    INFO  TBATG CONVERSION OF  BP1 N      not needed                  VENKATEV     STRDS1502 20100114013757     
    START MOVE NAMETABS        BP1 6      20100114013813              VENKATEV     STRDS1502 20100114013757     
    START tp_getprots          BP1 P      20100114013820              VENKATEV     STRDS1502 20100114013757     
    STOP  tp_getprots          BP1 P      20100114013827              VENKATEV     STRDS1502 20100114013757     
    STOP  MOVE NAMETABS        BP1 6      20100114013830              VENKATEV     STRDS1502 20100114013757     
    START MAIN IMPORT          BP1 I      20100114013836              VENKATEV     STRDS1502 20100114013757     
    STOP  MAIN IMPORT          BP1 I      20100114015151              VENKATEV     STRDS1502 20100114013757     
    INFO  TBATG CREATION OF EN BP1 n      not needed                  VENKATEV     STRDS1502 20100114013757     
    START SET VERSION FLAGS    BP1 V      20100114015157              VENKATEV     STRDS1502 20100114013757     
    START tp_getprots          BP1 V      20100114015200              VENKATEV     STRDS1502 20100114013757     
    STOP  tp_getprots          BP1 V      20100114015211              VENKATEV     STRDS1502 20100114013757     
    STOP  SET VERSION FLAGS    BP1 V      20100114015212              VENKATEV     STRDS1502 20100114013757     
    START EXECUTION OF REPORTS BP1 R      20100114015216              VENKATEV     STRDS1502 20100114013757     
    START tp_getprots          BP1 R      20100114015217              VENKATEV     STRDS1502 20100114013757     
    ERROR BD1K902473           BP1 R 0012 20100114015233 MANJUS       VENKATEV     STRDS1502 20100114013757     
    STOP  tp_getprots          BP1 R      20100114015253              VENKATEV     STRDS1502 20100114013757     
    STOP  EXECUTION OF REPORTS BP1 R      20100114015255              VENKATEV     STRDS1502 20100114013757     
    ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    STOP  imp single           BP1   0012 20100114015256              VENKATEV     STRDS1502 20100114013757     
    START imp single           BP1        20100114020600              VENKATEV     STRDS1502 20100114020557     
    INFO  TBATG CONVERSION OF  BP1 N      not needed                  VENKATEV     STRDS1502 20100114020557     
    START MOVE NAMETABS        BP1 6      20100114020605              VENKATEV     STRDS1502 20100114020557     
    START tp_getprots          BP1 P      20100114020606              VENKATEV     STRDS1502 20100114020557     
    STOP  tp_getprots          BP1 P      20100114020631              VENKATEV     STRDS1502 20100114020557     
    STOP  MOVE NAMETABS        BP1 6      20100114020631              VENKATEV     STRDS1502 20100114020557     
    START MAIN IMPORT          BP1 I      20100114020634              VENKATEV     STRDS1502 20100114020557     
    STOP  MAIN IMPORT          BP1 I      20100114021516              VENKATEV     STRDS1502 20100114020557     
    INFO  TBATG CREATION OF EN BP1 n      not needed                  VENKATEV     STRDS1502 20100114020557     
    START SET VERSION FLAGS    BP1 V      20100114021525              VENKATEV     STRDS1502 20100114020557     
    START tp_getprots          BP1 V      20100114021526              VENKATEV     STRDS1502 20100114020557     
    STOP  tp_getprots          BP1 V      20100114021536              VENKATEV     STRDS1502 20100114020557     
    STOP  SET VERSION FLAGS    BP1 V      20100114021536              VENKATEV     STRDS1502 20100114020557     
    START EXECUTION OF REPORTS BP1 R      20100114021550              VENKATEV     STRDS1502 20100114020557     
    START tp_getprots          BP1 R      20100114021550              VENKATEV     STRDS1502 20100114020557     
    ERROR BD1K902473           BP1 R 0012 20100114021757 MANJUS       VENKATEV     STRDS1502 20100114020557     
    STOP  tp_getprots          BP1 R      20100114021820              VENKATEV     STRDS1502 20100114020557     
    STOP  EXECUTION OF REPORTS BP1 R      20100114021820              VENKATEV     STRDS1502 20100114020557     
    ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    STOP  imp single           BP1   0012 20100114021822              VENKATEV     STRDS1502 20100114020557     
    START imp single           BP1        20100114025554              VENKATEV     STRDS1502 20100114025552     
    INFO  TBATG CONVERSION OF  BP1 N      not needed                  VENKATEV     STRDS1502 20100114025552     
    START MOVE NAMETABS        BP1 6      20100114025559              VENKATEV     STRDS1502 20100114025552     
    START tp_getprots          BP1 P      20100114025600              VENKATEV     STRDS1502 20100114025552     
    STOP  tp_getprots          BP1 P      20100114025613              VENKATEV     STRDS1502 20100114025552     
    STOP  MOVE NAMETABS        BP1 6      20100114025613              VENKATEV     STRDS1502 20100114025552     
    START MAIN IMPORT          BP1 I      20100114025615              VENKATEV     STRDS1502 20100114025552     
    STOP  MAIN IMPORT          BP1 I      20100114030423              VENKATEV     STRDS1502 20100114025552     
    INFO  TBATG CREATION OF EN BP1 n      not needed                  VENKATEV     STRDS1502 20100114025552     
    START SET VERSION FLAGS    BP1 V      20100114030432              VENKATEV     STRDS1502 20100114025552     
    START tp_getprots          BP1 V      20100114030433              VENKATEV     STRDS1502 20100114025552     
    STOP  tp_getprots          BP1 V      20100114030438              VENKATEV     STRDS1502 20100114025552     
    STOP  SET VERSION FLAGS    BP1 V      20100114030439              VENKATEV     STRDS1502 20100114025552     
    START EXECUTION OF REPORTS BP1 R      20100114030447              VENKATEV     STRDS1502 20100114025552     
    START tp_getprots          BP1 R      20100114030448              VENKATEV     STRDS1502 20100114025552     
    ERROR BD1K902473           BP1 R 0012 20100114030753 MANJUS       VENKATEV     STRDS1502 20100114025552     
    STOP  tp_getprots          BP1 R      20100114030809              VENKATEV     STRDS1502 20100114025552     
    STOP  EXECUTION OF REPORTS BP1 R      20100114030810              VENKATEV     STRDS1502 20100114025552     
    ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    STOP  imp single           BP1   0012 20100114030811              VENKATEV     STRDS1502 20100114025552     
    START imp single           BP1        20100114030842              VENKATEV     STRDS1502 20100114030839     
    INFO  TBATG CONVERSION OF  BP1 N      not needed                  VENKATEV     STRDS1502 20100114030839     
    START MOVE NAMETABS        BP1 6      20100114030845              VENKATEV     STRDS1502 20100114030839     
    START tp_getprots          BP1 P      20100114030845              VENKATEV     STRDS1502 20100114030839     
    STOP  tp_getprots          BP1 P      20100114030858              VENKATEV     STRDS1502 20100114030839     
    STOP  MOVE NAMETABS        BP1 6      20100114030859              VENKATEV     STRDS1502 20100114030839     
    START MAIN IMPORT          BP1 I      20100114030901              VENKATEV     STRDS1502 20100114030839     
    STOP  MAIN IMPORT          BP1 I      20100114030938              VENKATEV     STRDS1502 20100114030839     
    INFO  TBATG CREATION OF EN BP1 n      not needed                  VENKATEV     STRDS1502 20100114030839     
    START SET VERSION FLAGS    BP1 V      20100114030951              VENKATEV     STRDS1502 20100114030839     
    START tp_getprots          BP1 V      20100114030952              VENKATEV     STRDS1502 20100114030839     
    STOP  tp_getprots          BP1 V      20100114030956              VENKATEV     STRDS1502 20100114030839     
    STOP  SET VERSION FLAGS    BP1 V      20100114030957              VENKATEV     STRDS1502 20100114030839     
    START EXECUTION OF REPORTS BP1 R      20100114031008              VENKATEV     STRDS1502 20100114030839     
    START tp_getprots          BP1 R      20100114031009              VENKATEV     STRDS1502 20100114030839     
    STOP  tp_getprots          BP1 R      20100114031020              VENKATEV     STRDS1502 20100114030839     
    STOP  EXECUTION OF REPORTS BP1 R      20100114031020              VENKATEV     STRDS1502 20100114030839     
    STOP  imp single           BP1   0000 20100114031024              VENKATEV     STRDS1502 20100114030839

  • BW Transport Error

    Hi All,
    I get the following Transport error when trying to transport 0Customer from BW Dev. to Quality.
    Number range interval for characteristic 0CITY is missing
    Message no. BRAIN049
    Diagnosis
    The interval for number range object BIM0000093 of characteristic 0CITY is missing. The interval is created automatically, when you run the system in the BW clients.
    Procedure
    Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CITY to other clients.
    I get similar error for 2 other attributes of 0Customer (Name and Street). Some of the attributes have been turned navigational. All are activated in Development.
    Is there something i am missing?
    George.

    Hi Roberto,
    For City, name and street- the number range object entries (for SID'd) in Development system are:
    No From number  To number  Number status   Ext
    01 0000000001   2000000000   0000000057
    01 0000000001   2000000000   0000000196
    01 0000000001   2000000000   0000000107
    As per the error message and your reply, i went to SNRO and tried entering the objects: BIM0000093, BIM0000249 and BIM0000318 for the 3 Info objects and clicked the 'Number ranges' button. It appears like these number range objects do not exist.
    George.

Maybe you are looking for