Transport Error - DS does not exist in Source system

Dear All,
I am getting below Error while transporting the DSO from DEV to Quality.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A.
I have checked the dataosource is active and available in Development system. But Its giving error while importing.
As per the dataflow the data of this DSO is updated to Cube.
Has anyone solved this issue, because i have checked in SDN but there are no suitable answers.
Regards
Sankar

Hi,
Your right I am transporting ZM_ALT Dso . The following log of the error we are getting.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Mapping between data source 8ZM_ALT and source system DCQCLI041 is inconsistent
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Field /BIC/ZM_AA will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_APPL will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_BEM will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_MOD will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NCDS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NDESC will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES1 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES2 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NIN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPCS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Regards
Sankar

Similar Messages

DataSource ***** does not exist in source system ***** of version A

dear masters,
i m new to BI i m creating one report in BI. for that i m taking the data from Excel file. for that i have created the source system
and data source i saved and activated the data source. in data source preview i checked the data its coming properly as i given in
excel sheet. after that i m creating the infopackage while creating it i m getting the error DataSource ***** does not exist in source system ***** of version A. i checked data source in RSA2 but in this it is showing The DataSource DS_PO85 does not exist in version A also i checked in RSA3 its showing The DataSource DS_PO85 does not exist in version A.
pls help me how to overcome this problem.... where i m missing which setttings...
regards,
vicky

Hi Vicky,
Go to RSA1--> Data Source --> Find the data source (for which the load is getting failed)
Now Change and activate the data source again.
Both the status and version should be activated green.
Also you can use the check button to check the DS.
Thanks,
Naween

Data source 80BP_ID does not exists in source system

Hi All,
I have just started with standard content for SD module.
I activated my datasources 2lis_11_vaitm and 2lis_12_vcitm in my R3 system.
After replicating these data sources in my BI system i went to BI Content to activate my Info sources.
While installing info sources 2lis_11_vaitm and 2lis_12_vcitm i got errors namely
Data source 80BP_ID does not exists in source system
Datasource 80BP_REL not maintained.
Can somebody pls suggest a way out.
Thanks in advance..
Regards,
Rohit

Hi Rohit,
When ever you try to install the SD related Standard business content then it will automatically pick up the CRM related data. the 0BP_ID, these are related to the CRM.
Please uncheck the unrelated objects while installing the STD content.
you can select the option in the grouping as ONLY NECESSARY OBJECTS.
Regards,
Ravi Kanth

DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of vers

Hi iam working on BI 7 and ECC 6 system. When i try to install the transfer rules for 2 lis_11_vahdr in BI7 business content, it gave a message that "<b>DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of version A".</b> i have done an enhancement for this.I activated them from rsa5, activated both in LBWE as well as activated thier structures too after enhancing. I replicated and did all possible steps still iam unable to find.
Can anybody help me who has faced similar issue.
Regards,
Neil

Hi Niel,
Could you chek the RFC Connection of particular client.
Thanks,
Ram

DataSource 80SD_O03 does not exist in source system of version A

Hi,
While Activating the Standard DSOs i'm getting this "DataSource 80SD_O03 does not exist in source system of version A".
Regards,
Devi.

Hi,
Hope you followed the same in R/3
Datasource: Rsa5->RSA6
BI Side:
Rsa1->BI Content->Select Datasource->Installation->Replicating/Activating the DS
And same procedure for Infoprovider too.
Please analyze closely about the procedure, some where you are missing something.
Regards,
Suman

Transport error - rsds does not exists

I getting error " Target RSDS Z_ZDDP_HISTORY QASCLNT400 does not exist" while transporting some DSO with "before" option. It is strange because:
1. data source Z_ZDDP_HISTORY DO EXISTS in QAS system!
2. it is also exists on ECC side
3. the option "conversion of logical system" is checked

Hi,
As Mansi said, you need to make sure that you transport Active datasource from ECC and BW end as well. After ECC transport perform Replication in BW and then transport BW datasource replica.
This should resolve your problem.
Regards,
Viren

Application component does not exist in source system

hello all,
I was check the datasources in RSA5 but i cant see any application component hierarchy ...
all i can see is unassigned nodes...and all the datasources are under these 'unassigned nodes'
Could anybody tell me why its like this and what we can do to fix it...
Thanks,
Kani

Run RSA9 to transfer it, and then you should see it in RSA5.

BPC Error in Validation "0RATE_TYPE does not exist in source"

Hi Experts,
We are on BPC 7.5 Netweaver version SP7.
I am loading FX RATES to BPC from BI DSO using Data Manager. I am getting an error while doing validation for One of the InfoObject in DSO stating "0RATE_TYPE is not a valide command or 0RATE_TYPE does not exist in source " . I find that same infoObject 0RATE_TYPE is missing from the "field list " in "set selection" parameter while validating the transformation file; In datatype I am selcting "Transaction data from NW BW InfoProvider"
Pl let me know how it is possible that the transformation file has mapping for my InfoObject 0RATE_TYPE but my InfoObject 0RATE_TYPE is not available for selection.
Also if we can change the selection where to make required changes in BI Or BPC.
Thanks

DSO Structure:
Characteristics
     BPC Exchange Rate Period                 /BIC/ZPERIOD   ZPERIOD     /BIC/OIZPERIOD   CHAR          20
Key Figures
     Exchange Rate for BPC                    /BIC/ZXCHGRATE ZXCHGRATE   /BIC/OIZXCHGRATE DEC           11
     Ratio for the "from" currency units      /BIC/ZFFACT    ZFFACT      /BIC/OIZFFACT    DEC            9
     Ratio for the "to" currency units        /BIC/ZTFACT    ZTFACT      /BIC/OIZTFACT    DEC            9
Units
     Currency Key for Transaction Currency    CURKEY_TC      0CURKEY_TC /BI0/OICURKEY_TC CUKY           5
     From currency                            /BIC/ZFCURR    ZFCURR      /BIC/OIZFCURR    CUKY           5
Other Fields
     BW Delta Process: Update Mode            RECORDMODE     0RECORDMODE RODMUPDMOD       CHAR           1
Transformation File:
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
C_Category=*NEWCOL(C_100)
INPUTCURRENCY=0CURKEY_TC
R_ENTITY=*NEWCOL(GLOBAL)
R_ACCT=0RATE_TYPE
TIME=ZPERIOD
SIGNEDDATA=ZXCHGRATE
*CONVERSION
INPUTCURRENCY=INR.XLS

Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found

NOTE: This thread was started in the flash pro forum: http://forums.adobe.com/thread/898879?tstart=0 . However, because of adninjastrators recommandation, I open the thread here:
Hello there,
I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.
In the Flash software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
Too, when I try and open the html with the stream in a browser, nothing appears.
What should I check?
Thanks.
Kind regards,
Marius

Thanks for your reply.
Server, encoder and player are all on the same computer.
Admin console confirms the existence of "livestream" of type "Live" and a "NetStream" called "ABAF". No idea what the latter is.
Also, thought I'd mention that I have to start the servers from the Control Panel -> administrative tools -> services. If I try and start the server from the start menu, they dont start.
Thank you for your time.
Kind regards,
Marius

Error Infoobject does not exists in Infoprovider

Hi Friends,
I am getting "Error Infoobject does not exists in Infoprovider" in Quality. Actually Fiscal Period and Variant are not showing up in Query designer left panel (where we can see infoprovider structure). This problem is only in Quality, the query works fine in Development and training system.
Any thoughts why am I getting this and way to rectify it? I tried transporting the query again by collecting query elements. Still it gives same error.
Thanks and regards,
Balaraj

Probably your data provider has been changed and transported to quality and your query is still using those objects. Please check the info provider in both system if they are in sink or not.
Regards,
Kams

Cannot retrieve table metadata - Table does not exist: ODP source 0WRKCNT_CATG_TEXT does not exist

Hi, when i able to import the 0WRKCNT_CATG_TEXT extractor into source system i am getting the above bug Cannot retrieve table metadata - Table does not exist: ODP source <0WRKCNT_CATG_TEXT> does not exist, i have been checked in RSA5 T code to check the object is active or not, its active and its available in ROOSATTR table with enabled mode,but still its showing the error, can anyone help on this ..

Hi Airings,
'ORA-00942: table or view does not exist'
According to the error message, it seems that the migrating table or view does not exist in the database, or SSMA does not have access to it. To troubleshoot the issue, please check the following things.
1. Verify that if the spelling of the table or view name is correct.
2. If the table or view exists but is in a different schema from the current schema where the SQL is executing (in other word, the table doesn’t own by you, but owned by other user), the ORA-00942 error will return too. Resolve this by
explicitly reference the table or view by specifying the schema name (schema_name.table_name).
3. SSMA queries some additional catalog tables that you may not have permission to, please make sure that you grant the account permission to
read sys.mlog$. For more details, please review this similar thread:
Bug in SSMA For Oracle 6.0 for non-dba Oracle user.
Reference:
ORA-00942 Table or View Does Not Exist Oracle Error
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Error: web template does not exist in master system

I have Bex 7x query. I wnat to publish it on SAP enterprise portal (EP 7.0 SP19).
When I create a Bex iview and provide link of query, I get following error in preview:
The webtemplate <queryname> does not exist in master system.
Could you please let me know what can be the root cause of this error?
Regards,
Deepti

Dear Deepti,
Can you please make sure that Web template "0ANALYSIS_PATTERN" is acive in your system. If not, please activate it from
Business content.
You can check this by following below steps:
Please run TX SE38 and Execute Report RS_TEMPLATE_MAINTAIN_70 and enter the template name and execute.
If you could see the HTML code , this means it is activated.
Could you also please confirm me the settings you have in TX RSCUSTV27.
Regards,
Arvind

List View webpart from subsite to Top site shows random error "List Does not exist"

Hi All,
We have a list in subsite and we are creating a view for that list which we are showing in one of the top site home page. We have taken care of changing the web and list guid of list view webpart when we added on top site. Its working fine but some time
shows error "list does not exist" but when we refresh the error goes. Is it known issue or if there is any workaround for this? because we cannot go live with this random error.
Rohit Pasrija

try these links:
http://mroffice365.com/2012/01/sharepoint-display-a-list-or-library-from-subsite-to-the-top-level-site/
http://sharepoint.stackexchange.com/questions/37140/display-list-or-library-on-another-site-as-webpart

Error: SNAP_ADT does not exist in the database - manual check required

Hello Friends,
We are performing an upgrade+migration to HDB using the DMO option(Oracle to HANA).
We are getting below error in the phase MAIN_SHDCRE/SUBMOD_SHDDBCLONE/DBCLONE!
Also find the output of SE11 & SE14 attached.
SE14->
Please help us with the manual check.
Regards
Sury

Hi Sury,
In regards to the error below:
1EETGCLN Error: SNAP_ADT does not exist in the database -> manual check
required
1EETGCLN SNAP_ADT
1EETGCLN Table does not exist
Could you please try to activate the following tables via SE11?
- SNAP_ADT
Once they are activated, Could you please repeat the phase and update the result?
Thanks and Regards,
James Wong
Follow us:
SAP System Upgrade & Update Troubleshooting Wiki Space.
SAP Product Support Twitter ( Hashtag: #NWUPGRADE)

Full import error : "user does not exists"

Hi all,
I had 5 separated windows based servers (32bit) with oracle database 9i. I decided to centralize them into one server. So, I configured a new Linux (64bit) and install an Oracle 10gR2. Then I configured a starter database with dbca. I prepared a full dump file from one of old servers and successfully full imported it into starter database on new Linux (10g) server. After that I configured another database using dbca. But when I wanted to full import the previous dump file into new database I have got the error "user does not exists" regarding some demo schema and import terminated unsuccessfully.
I decided to create users regarding the errors and restart the import. After each user creation I was getting a new error for a new user account.
My main question is why first time import terminated successfully without any error but second one in new database raised error?
Thank
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:38 AM

Hi yingkuan,
imp full=y file=.... log=..... userid=system/manager@orcl
ALTER SESSION SET CURRENT_USER = "HR"
ORA-.... : user does not exists
And I know that import will create users that are not exists. Actually, all my specified schema are created but not some of accounts
Regards,
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:59 AM

Transport Error - DS does not exist in Source system

Similar Messages

Maybe you are looking for