Transport error failure with return code 12 for BIA indexed Cube
Hello,
I was trying to transport few cubes from the Dev to the QA system. However, the transport failed repeatedly with return code 12. I noticed that the version of Cubes in the target system had BIA indexes loaded on it. So, I deleted those indexes and re-transported the cubes.To my surprise, the transport went fine without the BIA indexes. This now opens up a new avenue for discussion of dropping and recreating BIA indexes for those cubes that needs to be transported.
Any thoughts on this new aspect before. Has anyone faced similar problems. I want to know your experiences before we can take this issue to SAP.
Thanks,
Rishi
Rishi/Vitaly/Marc,
How do you transport cubes with BIA indexes.
Do you drop/recreate the BIA index before the transport.
In my case, the transport kicked off adjustment job exactly as described in [Note 1012008|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1012008]
Indexes looks fine once this jobs completes successfully. The transport does not fail.
Is this approach fine.
I see that most of the customers drop/recreate indexes before transporting cubes.
Can I run into data consistency issues with this approach?
Input required.
Thanks,
Saurabh
Similar Messages
-
Transport error failure with return code 12
Hello Experts
I was trying to transport a request which consists of four Cubes, Infosources, datasources, Update rules and communication structure from QA to Test. The transport went without any problems from Dev to QA. However, while transporting to Q, it finished with errors with return code 12 with the following error: I tried to import it thrice with no success
Program terminated (job: RDDEXECL, no.: 21120900)
I checked in SM37 and the background job for this transport gets terminated everytime with the following dump:
Error analysis
An exception occurred which is explained in detail below. The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught and therefore caused a runtime error. The reason for the exception is: No text available for this exception
Does anyone has a clue about this?
Thanks
RishiHi Rishi ,
The Issue may be with the buffer capacity while transporting .
As i see from the post that you have captured all the objects
in one request and sent to target system . As per my experience never include all the objects in one Request .
Try to separate them depending on the onject types ,i mean datasource , infosource , ODS & cube seperately .
IF you cannot solve the problem , i think it is better to create a new request as i said in Development and try to move them to production .If next time request fail then you can look at the only that particuler Request only .
IF you have more information please share .
Thanks
Santosh -
Transport Request Ended with return code: === 12 ===
Hi
Good day to you.
We are able to move Transport Request from Development BW Client (with respect to an SEM-BCS Configuration) to Quality BW Client smoothly.
But when we move the same TR to Production client, we are getting the following error message. I would be very grateful if somebody could throw light on why it is happening, what could be its implications and what to do to avoid the same
Execution of programs after import (XPRA)
Transport request : DBWK901288
System : PBW
tp path : tp
Version and release: 340.16.37 640
Post-import methods for change/transport request: DBWK901288
on the application server: sapbwpd
Post-import method FINB_TR_AFTER_IMP_METHOD started for UCREPGROUP T, date and time: 20081029144344
Post-processing taking place in client 300
Import carried out using RFC destination PBWCLNT300
Communication error: Destination PBWCLNT300 -> long text
Errors occurred during post-handling FINB_TR_AFTER_IMP_METHOD for UCREPGROUP T
FINB_TR_AFTER_IMP_METHOD belongs to package FINB_TRANSPORT_TOOL
The errors affect the following components:
FIN-FB (Financials Basis)
Post-import method FINB_TR_AFTER_IMP_METHOD completed for UCREPGROUP T, date and time: 20081029144351
Post-import methods of change/transport request DBWK901288 completed
Start of subsequent processing ... 20081029144344
End of subsequent processing... 20081029144351
Execute reports for change/transport request: DBWK901288
on the application server: sapbwpd
There are no reports to execute
Execution of programs after import (XPRA)
End date and time : 20081029144351
Ended with return code: ===> 12 <===
Regards
SiddiqueHi Siddique,
Looks like your RFC destination is wrong. The proper syntax is FINBTR@<system>CLNT <client>.
See also the note 644610. -
Importing error Ended with return code: === 8 ===
Hi Experts,
I am trying to transporting an infoobject 0EMPLOYEE from Dev to Production.While importing the request I am getting an error like
Execution of programs after import (XPRA)
Transport request : BD1K901543
System : BP1
tp path : tp
Version and release: 372.04.36 700
Execution of programs after import (XPRA)
End date and time : 20090206164251
Ended with return code: ===> 8 <===
after expanding this error msg i am getting
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
by clicking on the error mag
Diagnosis;
If the characteristic is used in an InfoProvider with dimensions (for example, an InfoCube or MultiProvider), the compounded unit is not unique if currency key figures are used at the same time.
System Response
This type of modeling is not supported.
Procedure
Replace the currency with a different characteristic. If you nevertheless want to use a unit in the compounding, you should use the modeling of a characteristic that semantically represents a unit. To do so, copy the technical properties of the unit of measure or the currency.
How can I solve this problem?
Can add any other char to this compounding char is it works?if yes which currency char i need to add here?
Thanks & Regards,
SridharHi Sridhar,
I am facing the problem with 0CM_CTAR and 0CM_SHAR. both the characteristics are not allowed compouding ATTRIBUTES.
0cm_ctar not allowed comp .attr of 0unit_dim
0cm_shar not allowed comp.attr 0f area_unit.
for this reason what i need to do. Please give me help on this.
sridhar could you give me solution what i need to do. i am also implement same sap note or any other solution you have.
Please kindly give me reply.
Thnaks,
Guna.
Edited by: gunasekhar raya on Apr 14, 2009 6:16 PM -
Transport fails with return code 12 for 0CHANOTASSIGNED Characteristics
Dear Experts,
I am transporting the 0CHANOTASSIGNED characteristics from BI Dev to BI QA.
In BI Dev, I use the option Necessary Object.
While importing request into BI QA, it fails with a return code 12. Some of the errors are:
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
System error in lock management
Error AD 025 during after import handling of objects with type(s) IOBJ
Start of the after-import method RS_IOBC_AFTER_IMPORT for object type(s) IOBC (Activation Mode)
Error when checking the InfoObjectCatalog 0CHANOTASSIGNED
InfoObject 0ABCINDIC is not available in active version
InfoObject 0ABCPRC_TYP is not available in active version
InfoObject 0ABCPROCESS is not available in active version
InfoObject 0ACCT_TYPE is not available in active version
InfoObject 0ACTIONREAS is not available in active version
This goes on for lot of infoobjects. If I were to goto RSA1 of BI QA and check any of the above objects, they are 'INACTIVE'.
But they are 'ACTIVE' in BI Dev.
Please help me in resolving this issue.
Thanks and BR,
Raj JainHi I.R.K,
I recreated a trasnport for just one Infoobject (0ABCINDIC) which was one of the objects not active as shown in the logs of BI QA while transport.
I did not make any changes or delete any data etc. I then just transported these request from BI Dev to BI QA.
The transport was successful with return code 0. I then checked this object in RSD1 of BI QA and it was activated.
Any ideas what may be the cause???
Thanks,
Raj Jain -
Error in transport, ended with return code: 12, job RDDEXECL cancelled
Hi Friends,
When I am trying to import a request in a BW preproduction system, it is giving below error: However, the transport is imoprted successfully in Quality.
===================================
Program terminated (job: RDDEXECL, no.: 09222300)
See job log
Execution of programs after import (XPRA)
End date and time : 20080509092238
Ended with return code: ===> 12 <===
Job log:
Date Time Message
09.05.2008 09:22:23 Job started
09.05.2008 09:22:23 Step 001 started (program RDDEXECL, variant , user ID DDIC)
09.05.2008 09:22:23 All DB buffers of application server unix0001 were synchronized
09.05.2008 09:22:25 ABAP/4 processor: UNCAUGHT_EXCEPTION
09.05.2008 09:22:25 Job cancelled
=======================================
Kindly advice.
Thanks & regards,
Kunal Patel.Hello,
I ran a search for this error and found the following notes:
SAP Note 966234 - 70SP10: DTP transport and content error
SAP Note - 1074388 SAPBINews NetWeaver 7.0 BI Support Package 16
Check if they are relevant for your system.
Regards,
Siddhesh -
Repair error in transport request with return code-0008
hi!!
I am getting error while importing a transport request by giving return code-0008.
Can anyone explain me the reason and solution for the same.
Rgds,
Ajeet.Hi Ajeet,
Make sure that all the tasks whith in the request are released and they are in active state as well. Discuss with the owner of the CR and check all the objects are in active state and all the tasks are released. You can check with the logs as well to het more clues.
Regards,
Hari.
PS: Points are welcome. -
Error in transport, job RDDEXECL cancelled, ended with return code: 12
Hi all,
When I am trying to import a request in a BW system from development to quality , it is giving below error:
Program Terminated (job:RDDEXCEL no:11315700) messg no:TR012
Please do needful
Thanks and Regards,
srinivas.mHi Gurus,
I have the same error "Error in transport, job RDDEXECL cancelled, ended with return code: 12" (Programa cancelado (job RDDEXECL, nº 09292900)).
I have checked all the steps that are in the "Note 1101187 - The OLAP tunnel" and they are implemented.
Find below the information about my BW system:
SAP_ABA 700 0024 SAPKA70024 Componente multiaplicaciones
SAP_BASIS 700 0024 SAPKB70024 Sistema Base SAP
PI_BASIS 2005_1_700 0024 SAPKIPYJ7O PI_BASIS 2005_1_700
ST-PI 2008_1_700 0004 SAPKITLRD4 SAP Solution Tools Plug-In
SAP_BW 700 0026 SAPKW70026 SAP NetWeaver BI 7.0
BI_CONT 703 0016 SAPKIBIIQ6 Business Intelligence Content
ST-A/PI 01N_700BCO 0000 - Servicetools for other App./Netweaver 04
I am trying to transport "Business Content (Statistics)", if this information can help you.
What can i do to solve the problem? I am finding some clue and i dont find anything. It will be much appreciated any idea to solve the problem.
Thanks in advance and kind Regards,
Manuel
Edited by: Manuel Guijarro on Oct 11, 2011 3:46 PM -
Transport Ended with Return code error = 8? What we do now?
Hi all,
I was trying to transport the Update rules from Development system to Production system.
But in the middle it got failed in Quality system & given the error as mentioned below.
"Ended with Return code = 8".
What we need to do now.
Please Give ur valuable suggestions.
Thanks in Advance.Hi,
Pleas make sure that the target and the source for the update rules are present in the Quality sytem and are activated. if they are not present or are in inactive state then u need to transport them first and later on update rules.
Sometimes what haapens is source and targets object for the update rules are present in the quality system and we make some changes in them in development and after making changes forget to transprt the changed request for source target and directly try to transport update rules which fails giveing an error. so jst make sure that the version in Development and the quality system for the both the source and targets objects are exactly same.
i guess there would be one among the two cases mentioned above but still if its not the case then see wat error are u getting provide us the exact error so that we can be of more help to you.
Assign points if applicable
Thanks
Puneet -
Transport Error - tp finished with return code: 152
Howdy All,
I put through some transports into Production on Thursday 22/06/2007 which worked succesfully.
Nothing has changed in the instance profiles, TP Parameters or the TMS. Now when I try to transport a different request I get the following :
26.06.2007 TP 1
Transport executed for: E75K913986 with command string:
This is E:\usr\sap\P75\SYS\exe\run\tp.EXE version 340.16.31 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
The import of the transport request E75K913986 for system P75 was not performed.
Please check the tp command. The buffer entry is printed out below.
P75 buffer:
TASK .CLI|PROJECT |P|CMD I |DD Im |Activ |MainI |MC A
---------------+--+--+--
E75K913986 .300| | |0000 | | |0000 |
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
SWARNS: Highest tp internal severe warning was: 0152
tp finished with return code: 152
meaning:
Nothing done.
Transport function error: Call failed
E75K913986 has previously been imported. It needs to be re-imported because since it went in another transport (which was created before it) has gone and overwritten some of the objects.
Your advice / guidence would be greatly appreciated, there doesn't seem to be too many articles about this error.
CheersI know it has passed 7 years since this problem was recorded, but since we ran into this issue and were looking for assistance, the provided answers above did not apply to our case. Therefore, we add some tips for the readers:
Check the TMS alert in the system where the transpor was created. It can be done in many ways, but you ca do STMS > Monitor > TMS Alert > TMS Alert Viewer
Our issue was with retrofit, which did not exist in 2007. Basically TMS is reporting that the transport of copies that is being expected does not exist, hence "Nothing done".
Solution was to generate in SolMan via report RETRO_SERVICE_CREATE_RFIT_DATA the missing transport of copies. Once that was done, we could perform the transport move.
Regards,
Juan Carlos -
Error: Test call of transport control program (tp) ended with return code 0
Hi Experts,
When we are trying to transport Request.
Error: Test call of transport control program (tp) ended with return code 0208
in STMS what are the steps to fallow to just back up the code.
Any Solutions is Greatly Appreciable...
Thanks in Advance,
Ram,Hi,
a)If your system is UNIX check /usr/sap/trans is mounted or not?
b)After configuring TMS did you save and activate?that can be one reason.
c)tp might be corrupted.u need to upgrade your tp. (or you can upgrade to the latest kernel)
Please check the below link
could not start transport control program tp
However as suggested by NIbu, you should restart the server once before doing any other checks
Thanks
Debdeep
Edited by: Debdeep Ray on Jul 13, 2009 4:28 PM -
Test call of transport control program (tp) ended with return code 0249
Hi,
When i release a TR i get the following error
Pls let me know of what can be the reason for the same
I did a kernel upgrade 2 days back
Test call of transport control program (tp) ended with return code 0249
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK BWDK900308 pf=
WDBSSAPBWD01\sapmnt\trans\bin\TP_DOMAIN_BWD.PFL -Dtransdi"
which checks the export requirements, returned the following information:
Return code from tp: 0249
Error text from tp: ERROR: No connect due to DbSl Load Lib Failure
System Response
Further processing is terminated.
Procedure
Check the following points:
u2022 Feasibility of the transport control program tp
u2022 Parameter settings in the transport profile
u2022 Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
u2022 Write authorization for the subdirectories
u2022 Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removedHi Balaji,
End of your question contains the areas to be varified.
Your SAP seems to be installed in windows environment
Check transport profile paramater and file permissions.
Try to browse the directory
WDBSSAPBWD01\sapmnt\trans\bin\ from start->run
Check with tp connecting to DB with tp connect <SID>
chceck file permission to datafile and cofiles (in case of OS UNIX)
Regards,
Ganesh -
Hello Expert,
My SAP System environment as follow
SAP Product : SAP NetWeaver 04
Operating System : Windows 2003 32 bit
SAP Database : MS SQL 2005 32 bit
I have installed SAP NetWeaver 04 system with system copy option. I have installed Application server & Database server on different physical server. App server : SSC2PAS3SFWBW and Database Server : SSC2PAS3SFSQW1.
After SAP NetWeaver 04 installation with system copy I have done TMS configuration with virtual system for a test, It is working fine but while releasing request form SFD system (Development system) it get error “Test call of transport control program (tp) ended with return code 0200. Message no. TK094”
I have reconfigured the TMS and check but it can’t help. TR gets release and import with OS level but at SAP level it gets error.
Trans --> Log
1 ETP199 ######################################
1 ETP199X######################################
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP101 transport order : "SFDK905838"
1 ETP102 system : "SFD"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "340.16.72" "640"
1 ETP198
2EETP128 No target system defined. "SFDK905838" is not a transport request.
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP110 end date and time : "20140602150208"
1 ETP111 exit code : "12"
1 ETP199 ######################################
Steps for Reconstruction
# Upgraded latest SAP Kernel Non-Unicode 640_Rel Patch level 404
# Reconfigured the TMS
# Full User Permission has been set to all SAP Directory.
Rgds,
AshokHi Ashish,
I have removed virtual system form TMS and configured with Development & Production system, but the same error. Not able to release TR.
SLOG as below.
ERROR SFDK905832 SFD f 0012 20140602090930 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602093923 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602094059 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602102854 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602103633 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602104142 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602111140 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602112723 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113109 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113704 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113722 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113753 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113809 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905834 SFD f 0012 20140602125959 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905834 SFD f 0012 20140602130035 default_user BASIS@ORIGIN SSC2PAS3SFWBW
START EXPORT PREPARATION SFD e 20140602132917 sfdadm SSC2PAS3SFWBW 20140602132916001358
START tp_getprots SFD E 20140602132917 sfdadm SSC2PAS3SFWBW 20140602132916001358
STOP tp_getprots SFD E 20140602132920 sfdadm SSC2PAS3SFWBW 20140602132916001358
STOP EXPORT PREPARATION SFD e 20140602132920 sfdadm SSC2PAS3SFWBW 20140602132916001358
ERROR SFDK905836 SFD f 0012 20140602133526 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905836 SFD f 0012 20140602133540 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602144313 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602144350 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602144430 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602150202 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602150208 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603080634 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603081006 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603083952 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603084005 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603091608 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603091617 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905842 SFD f 0012 20140603091826 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603093805 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603101944 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603102709 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603114753 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603121948 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603122039 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603123438 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603135937 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603140114 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603140233 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603140339 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603141743 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603150924 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603152403 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603152753 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603153518 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162013 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162544 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162639 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162755 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603163347 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603163740 default_user A559420 SSC2PAS3SFWBW
Rgds,
Ashok -
Hi Experts,
We are doing transports from BD1 to BQ1 and getting this error message.
Could anyone please let me know why and what would be the solution for the following error message:
Execution of programs after import (XPRA)
Transport request : BD1K900065
System : BQ1
tp path : tp
Version and release: 370.00.09 700
Execution of programs after import (XPRA)
End date and time : 20070803133308
Ended with return code: ===> 8 <===
Thanks in advance.
Best Regards,
Chandu.Raymonds,
There is huge list of errors coming up. Some of them are as below:
Navigation attribute 0SALESORG is missing in characteristic 0PLANT
Navigation attribute 0SALES_DIST is missing in characteristic 0PLANT
Characteristic 0RT_LOCATIO: Referenced characteristic 0PLANT not (actively) available
Attribute 0INT_CUST from characteristic 0SALESORG not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Hierarchy characteristic 0BPARTNER of characteristic 0UCCONTRACT is not active
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Thanks in advance.
Best Regards,
Chandu. -
Transport control program (tp) ended with return code 0200
Hi Gurus,
Please help, we have a fresh system copy of our prod. I already configure new domain controller with one virtual system. it was meant for 2 system lanscape. PRD -> VIR. The problem now is everytime we try to release a config it shows an error
"Test call of transport control program (tp) ended with return code 0200"
System error shows that calling "C:\>tp EXPCHK BWPK900060 pf=
SCWOSAPBW3\sapmnt\trans\bin\TP_DOMAIN_BWP.PFL -Dtransdir=
SCWOSAPBW3\sapmnt\trans" Error text from tp: ERROR: Buffer check failed.
But doing it in OS level it has no issues
C:\>tp EXPCHK BWPK900060 pf=\\SCWOSAPBW3\sapmnt\trans\bin\TP_DOMAIN_BWP.PFL -Dtr
ansdir=\\SCWOSAPBW3\sapmnt\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.63 (release 640)
createinfo succeeded
Buffer check succeeded
tp finished with return code: 0
meaning:
Everything OK
STMS are all ok connection test, transport directory test and transport tool test.
Kindly help me to resolve issue.
OS platform is windows 2003, Netweaver 04 640, MSSQL2005.
Thank you in advance.
JoelHi Anil,
Here is the result after the tp check all command.
D:\usr\sap\trans>tp check all pf=d:\usr\sap\trans\bin\TP_DOMAIN_SID.PFL
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.63 (release 640)
check>Log file is written to \\hostname\sapmnt\trans\tmp\CHECK.LOG
check>
check>Collected 3 filenames from [\\hostname\sapmnt\trans\buffer\.]
check>Collected 2 Systemnames from [\\hostname\sapmnt\trans\buffer\.]
check>Collected 00001 out of 00001 entries from buffer BWP.
check>Collected 00001 entries from buffers
check>
check>Collected 1 filenames from [\\hostname\sapmnt\trans\cofiles\.]
check>Found 0 invalid filenames on Cofile-directory
check>
check>
check>Collected 1 filenames from [\\hostname\sapmnt\trans\data\.]
check>Found 0 invalid filenames on Datafile-directory
check>
check>Collected 14 filenames from [\\hostname\sapmnt\trans\log\.]
check>Found 2 invalid filenames on Logfile-directory
check>
check>Collected 3 filenames from [\\hostname\sapmnt\trans\sapnames\.]
check>
check>WARNING: BWPK900060 has status T_STEP_UNKNOWN in sapnames/TEST
check>WARNING: BWPK900058 has status T_STEP_UNKNOWN in sapnames/TEST
check>WARNING: BWPK900056 has status T_STEP_UNKNOWN in sapnames/TEST
check>WARNING: SAPKD64038 has status T_STEP_UNKNOWN in sapnames/SAPUSER
check>WARNING: BWPK900060 has status T_STEP_UNKNOWN in sapnames/SUPPORT
check>Elapsed time 0m 1s
tp finished with return code: 0
meaning:
Everything OK
Kindly advise on what to do next.
Thank you.
joel
Edited by: Joel Cancio on May 31, 2010 11:47 AM
Maybe you are looking for
-
IMovie won't open and keeps unexpectedly quitting!!
I am a Youtuber and film student. I have a lot of projects in the making and am panicking that they're gone for good because iMovie won't open anymore!! If anyone can help me solve this issue, I'd be eternally grateful! Process: iMovie [617]
-
I am trying to load fixed length flat file into Oracle table in ODI by using LKM File to Oracle (SQLLDR). But getting below error in Call sqlldr step, org.apache.bsf.BSFException: exception from Jython: Traceback (most recent call last): File "<str
-
How to make video content on a hard drive have DVD-style navigation?
I have a client who plays video clips in a seminar setting, and has been using a DVD player to accomplish this so he can use the remote to jump between different movie clips at will. He now wants the content stored on his hard drive to no longer have
-
Read Excel File on Application Server to Internal Table
Hi Everybody! Can anyone tell me how I can Read in an Excel File from the Application Server? I'm familiar with the OPEN DATASET Statement and I already use it to read in text files. Important is, that it works in the Batch / can be used as a backgro
-
Not able to Preview Crystal Report from Portal
Hi Not able to view the Report designed using Crystal Report. It can be viewed when access directly in BOBJ System. It show the following error Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .