Transport Error from BI DEV to BI QUAL in Method Exec

Hi: Hope youre all having a wonderful day. I am dealing with a brand new installation of BI7 and ECC 6 (on the R/3 side). Recently I activated some extract structures on the R/3 DEV and had them transported on to the Quality box and everything went well. I then had my Multiprovider/Infocubes/Datasourses on the BI dev transported to BI Quality and everything but some objects did not make it thru. I got an error 8. I looked into the error log and it everything but the 'Method Exec' had succesfully transported. The following is a brief excerpt from that;
Cross-system information for user USER123
    Imports with Errors
        BIDEV System BIDEV
              BIK123456              ZMULTPRV_B12-Inspection Results and Related Objects
                BIDEV        System BIDEV
                           Pre-Export Methods      12/07/2007 14:52:28    (0) Successfully Completed
                           Export                           12/07/2007 14:54:29    (0) Successfully Completed
                    Import steps not specific to transport request
                BIQUAL        System BIQUAL
                           Import                                   12/07/2007 16:47:07    (0) Successfully Completed
                           Check Versions                     12/07/2007 16:47:10    (0) Successfully Completed
                           Method Execution                12/07/2007 17:44:30    (8) Ended with errors***********
12/07/2007 16:37:03    (8) Ended with errors
12/07/2007 17:44:30    (8) Ended with errors
                    Import steps not specific to transport request
              BIK123455              ZMULTPRV_B11 (Purchasing) and Related Items
                BIDEV        System BIDEV
                           Pre-Export Methods       12/06/2007 20:15:47    (0) Successfully Completed
                           Export                             12/06/2007 20:17:18    (0) Successfully Completed
                    Import steps not specific to transport request
                BIQUAL        System BIQUAL
                           Import                                   12/07/2007 08:41:43    (0) Successfully Completed
                           Check Versions                           12/07/2007 08:41:46    (0) Successfully Completed
                          Method Execution                         12/07/2007 09:21:42    (8) Ended with errors
                        12/07/2007 05:09:42   (12) Canceled
                             12/07/2007 07:54:59   (12) Canceled
                             12/07/2007 08:34:17   (12) Canceled
                                 12/07/2007 09:21:42    (8) Ended with errors
Start of the after-import method RS_TRCS_AFTER_IMPORT for object type(s) TRCS (Activation Mode)
Start of the after-import method RS_UPDR_AFTER_IMPORT for object type(s) UPDR (Activation Mode)
Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Activation Mode)
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
InfoSource 0PRODUCT_TEXT is not available in source system BIQUAL
Error when activating DataSource 0PRODUCT_TEXT BIQUAL
InfoSource 0PR_BASE_UNIT_ATTR is not available in source system BIQUAL
Error when activating DataSource 0PR_BASE_UNIT_ATTR BIQUAL
InfoSource 0PR_PURCHASE_CATEG_ATTR is not available in source system BIQUAL
Error when activating DataSource 0PR_PURCHASE_CATEG_ATTR BIQUAL
InfoSource 0PR_STATUS_ATTR is not available in source system BIQUAL
Error when activating DataSource 0PR_STATUS_ATTR BIQUAL
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
DataSource 0ABORT_TEXT does not exist in source system R3DEVCLNT200 of version A
Mapping between data source 0ABORT_TEXT and source system R3DEVCLNT200 is inconsistent
DataSource 0ABORT_TEXT does not exist in source system R3DEVCLNT200 of version A
Field AUFBEWORT will not be delivered from DataSource 0ABORT_TEXT in source system R3DEVCLNT200
Field LANGU will not be delivered from DataSource 0ABORT_TEXT in source system R3DEVCLNT200
Field TXTMD will not be delivered from DataSource 0ABORT_TEXT in source system R3DEVCLNT200
Field WERKS will not be delivered from DataSource 0ABORT_TEXT in source system R3DEVCLNT200
DataSource 0ARTICLE_ATTR does not exist in source system R3DEVCLNT200 of version A
Mapping between data source 0ARTICLE_ATTR and source system R3DEVCLNT200 is inconsistent
DataSource 0ARTICLE_ATTR does not exist in source system R3DEVCLNT200 of version A
Field ATTYP will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BEGRU will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BRAND_ID will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BREIT will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BRGEW will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BSTME will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BWSCL will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BWVOR will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field COLOR will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field DATAB will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field EAN11 will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field ERSDA will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field EXTWG will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field FREE_CHAR will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Message was edited by:
        BobbySi

Hi Bobby,
You need not to activate the Objects in Q system exculsively. Once your transport request is succesfull from D to Q, the Objects will be ready for data loads. Even same with Transfer, Update Rules (3.5) , Transformations, and Infopackages..and routines..etc. Just re-check the missing object in the transport error log and check whether it has been in another request.
Please get back if you have any questions.
Regards,
-N-

Similar Messages

Transport Error from BI Dev to BI Production

Hi all,
I am started the BI transport from BI dev to BI production. we are not having BI quality.
I am transporting the DSO and the total data flow to the production.
I have copy the 0FIAR_O03 DSO to the Z DSO and i am transporting thr Z DSO(ZFIAR_O3) to BI production.
While transportation i am getting below error.
DataSource 8ZFIAR_O3 does not exist in source system EBP740 of version A |
Reading the Metadata of ZFIAR_O3 ...
Creating DataSource 8ZFIAR_O3 ...
Application component DM of DataSource 8ZFIAR_O3 does not exist
Error when creating the export DataSource and dependent Objects
| Error when activating DataStore Object ZFIAR_O3
Please suggest.
I have transported all the objects propely.
Regards,
Macwan James

Hi James,
This issue could be because the Application Component hierarchy might not be installed in Production System.
Collect the Application Components and transport to Production. Then reimport the failed request, should resolve.
Regards,
Chathia.

Transport Error from Dev to QA.

Hi All,
We r facing transport error while transporting req from Dev to QA,
Created queries in dev and try to trasport in QA.
Error:
Execution of programs after import (XPRA)
Transport request   : BD1K922532
System              : BQ1
tp path             : tp
Version and release: 372.04.29 700
Execution of programs after import (XPRA)
End date and time : 20091022031634
Ended with return code: ===> 8 <==
what could be the reason?
Regards,
SD

Hi.
I have collected all neccessary object which query contains, but after releasing the request it shows the message,
The request contains message that have already been edited & transported to other projects. To avoid overshooter problem when importing you need to create dependency information for the request with which object were last transported. The requiered information is listed here together with the existing information.
Should i go ahed with above message???? Is there any dependency?
Regards,
SD

Transport error from dev to quality

HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
      Start of subsequent processing ... 20100409231713
      End of subsequent processing... 20100409231716
Thanks,
kranti

Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
     Start of subsequent processing ... 20091112090953
     End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed

Transporting Developmenrts from PI DEV to PI Prod

Hi Experts,
in my PI server, when ever I do a development in the ABAP stack, I release and transport the request to Basis. And In case of developments in Java stack, I use Change Management Service - Transport Studio to move it.
Apart from these processes, what other practices / processes are done in the industry to move developments to Prod..
Regards,
Arnab

Hi,
What is CTS+ and why is is introduced:
The Change and Transport System (CTS) is a tool that helps you to organize development projects in the ABAP Workbench and in Customizing, and then transport the changes between the SAP Systems in your system landscape.
The XI use case for CTS+ introduces a new transport handling mechanism that offers tighter integration for the transport of ABAP, Java, and Integration Builder objects (Integration Repository and Integration Directory) using the Change and Transport System (BC-CTS) functionality.
As your XI system requires both the ABAP and the Java stack of the SAP NetWeaver Application Server, the following transport tools are available after installation:
u2022
The ABAP transport environment (BC-CTS)
u2022
The file export and import mechanisms or CMS integration to transport Repository or Directory objects in your transport landscape
In addition, you might also have to transport Java development objects by using the SAP NetWeaver Development Infrastructure itself.
The enhancements to CTS in combination with the SAP Solution Manager Change Request Management (ChaRM) address the following issues:
u2022
Synchronized transports for mixed systems (ABAP & Java)
u2022
A unified application for mixed system landscapes
u2022
Tracking of non-ABAP transports including Change Request Management
For your XI landscapes there will be one central transport environment with CTS+ where you can manage all XI-relevant transport objects from a single entry point.
This how-to guide describes the configuration settings you must make in the CTS+ system and XI systems. The functionality must be set up according to the release version of the integrated XI system. The two configurations will be described separately:
u2022
Configuration setup for releases prior to SAP NetWeaver 7.0 SPS12 (also for SAP NetWeaver 2004 SPS14 and higher).
u2022
Configuration setup for release SAP NetWeaver 7.0 SPS12 and higher.
Refer the link for CTS+ step by step method of transport:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
http://help.sap.com/saphelp_nw04/helpdata/en/03/dcb6b6048711d3b42a00609419f767/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
Regards,
Phani

Error when transporting Webservice from our DEV system to QA system

Hello, I created a web service from an rfc by following the wizard from Utilities>More Utilities> Create Web Service. This was created in our 030 client of DEV. I had to create two transports one client independent that was the VI and Service and one Client dependent for the actual webservice. I then transported the webservice to our DEV 200 client and all worked well. Next I transported both to our QA box, first the vi/Service transport then the webservice transport. This is not working, in our QA system, from wsadmin when trying to get the wsdl error is Could not determine wsdl address (ICF ERROR) and from wsconfig when I pull up the service definition and variant the status shows a red stop sign. Is there a trick to transporting this webservice to different systems?
I def award points for helpful answers
Cheers
Devlin

hi,
I had this problem once and in my case the service wasn't activated in SICF.
so see your service tree under /sap/bc/srt/rfc/sap/<your_service> and probably it's inactive (grayed out). right klick and activate it.
anton

Transport error from XI 3.0 to PI 7.0

Hi experts,
While transporting the TPZ files (development previously done in XI 3.0 server, which is now decommissioned) to PI 7.0, there is a problem encountered. The error message is as follows:
import failed because of business system transfer of object
Receiver agreement I Soap_Service_ESA I SAP xyz I Zxyzp_qr_st:Obligatory transport target for business system SAP xyz not found in System Landscape Directory.
While working on the issue we came to know that the GUID might be different for the Software component, Product, which are created in the new PI 7.0 server from the old XI 3.0 Server.
To import the IR or ID objects, we need to do a export/import from old system to new system so that the GUID remains the same.
This is where we are facing issues while importing the tpz files.
Also in our case we donu2019t have the source system, so that we can create the transport targets and then import.
Any solutions for this ? ? ?
Regards,
Abhisek.

Hi
import failed because of business system transfer of object
Receiver agreement I Soap_Service_ESA I SAP xyz I Zxyzp_qr_st:Obligatory transport target for business system SAP xyz not found in System Landscape Directory.
You need to create the business system with name SAP xyz in new SLD. As it is not able to transport objects without this target name.
Thanks
Gaurav

Transport request from 2 DEV clients into QA

Hi Experts,
Currently we transport all of over modification from DEV/110 client to QAS/200 client. we configured the TMS according it.
But now business wants to make another client for functional guys DEV/150, these customizing request should be moved to DEV/150 to QAS/200.
could you please guide me how should we have to configure TMS so that we can export TR from both development client.
SAP ERP - ECC6 EHP6
OS - Windows 2008 R2
DB - Sybase ASE 15.7
Best Regards
Deepak

Hi Nayeem,
Thanks for reply, i visited on your suggested pages but still not able to create another consolidation route.
could you please see the attached screen of STMS.
i am able to define target client to import but not able to define Integration system with client as DEV 150.
also we implemented CHARM on SOLMAN 7.1 SP8.
Please let me know what change we have to make in STMS.
Best Regards
Deepak Singh

Transporting Dashboard from BI Dev to BI Prd

Hi all,
I have created a dashboard in visual composer and in the system i choose BI Dev server. Now I want to transport that dashboard to BI Prd.
Is there any way to do this?
Best Regards,
AI.

Hi
This is the correct way to move the VC model to Prd. You need to follow the steps below -
1. Move all the BI changes to BI Prd.
2. Change system to BI prd in vc dev itself.
3. Check whether everything is coming correctly in Bi PRd.
4. Deploy 'Entire Model' (there is check box when you select deploy)
5. Move the VC model to Ep Prd.
Then you can see everything here you need to check that EpPrd should be connected to BI Prd.
Regards
Sandeep

Transporting InfoCube from bw dev to bw prd

Dear All.
I need to transport the infocube which is in bw dev to bw prd through bw quality. the infocube is created in bw dev was just "install", not "install with transport". is there any transaction or any other option with which i can transport it to all the way to bw prd. please advise.

Hi,
go to RSA1.
Click on Transport connection in the left hand side panne.
new screen will pop up
In the right hand side panel, click on grouping and select only necessary objects.
NOw click on object types.
Click on infocube and select the necessary infocube.
Click on transfer and then check whether all the necessary objects has been selected or not.
Then click transport to transport the Infocube to the Quality system..
It will ask for transport request, then you can easily create a transport request...
Cheers...
Puneesh

How to Transport iViews from Portal Dev system to Prod system?

Hello friends,
This is an urgent request and it would be of great help if you can give me a solution to this.
We have a Development Portal and a Production Portal. There is no QAS Portal. We are on EP 5.0 and BW is 3.5. Coming to my question, I have created an iView on a Web Application Designer template and assigned it to a role on the Development Portal. The report displays well on the Portal. Now I want to move this newly created iView to Production Portal. I absolutely have no idea how to do this as it is generally a Portal person's work and I have been asked to do this as the Portal person is currently on leave. I need to move the iView to Production as quickly as possible and I would really appreciate if any of you can send me detailed steps on how to do this.
The best way to say thanks in SDN is to assign points to helpful answers and I will not forget that.
Thanks,
Deepthi.

Hi Deepthi,
observe these links:
Here is some material:
How to Transport Models Within SAP Analytics
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/035be5d4-0a01-0010-b48a-d4c8c9b020b5
Actually, those pieces are also included in my book "SAP NetWeaver Visual Composer" which is already available from SAP-Press ( http://www.sap-press.com/product.cfm?account=&product=H1932 )
If Usefull Asain the points.
Thanks,
kiran.
Message was edited by:
kiran manyam

Transporting Iviews from QA/DEV system to production system

Hello All,
I have some iviews that are based on BW report Iview (BEX ). I have them developed in the qa environment. How can I transport the same iview to the production server.
The portal landscape is some thing like this.
We have a devlopment and qa portal , these are accessing the DEV and QA bw systems respectively.
Then we have a production portal server and a production BW server.
Now we have developed some reports in BEX and those are published on the development portal using Web Application Designer.
How can we trasport the same iviews to the production environment? or first of all is it possible to transport the same? We are on EP 5.0 Sp4 and BW 3.5
Thanks in advance
Pradeep Bhojak

Bhojak,
Yes it is possible to do it. Look at export option under System Admin menu. You can export everything as a package and import the same pakage into your Production system.
Good Luck.
GO.

Transporting roles from dev to qa and prod servers ep6sp11

Hi
We have EP6 SP11 -erp2004
I will be transporting roles from the dev environment to a QA(quality assurance) and a production portal server.
Only the roles needs to be transported, <b>no</b> user assignments to be transported.
I have read some docs on this and would just like to confirm this is the procedure:
Basically:
1.Export the roles to a common directory
2.Importing it in qa and prod
3. From here onwards i need help on..Do i add the roles through delta links??? What other steps needs to be done?

Hi Pradeep
Thanx for your reply.
With the exception of the delta link assignment, i will assign it directly, I can just follow the procedure i have written?
RD

BW Transport Error

Hi All,
I get the following Transport error when trying to transport 0Customer from BW Dev. to Quality.
Number range interval for characteristic 0CITY is missing
Message no. BRAIN049
Diagnosis
The interval for number range object BIM0000093 of characteristic 0CITY is missing. The interval is created automatically, when you run the system in the BW clients.
Procedure
Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CITY to other clients.
I get similar error for 2 other attributes of 0Customer (Name and Street). Some of the attributes have been turned navigational. All are activated in Development.
Is there something i am missing?
George.

Hi Roberto,
For City, name and street- the number range object entries (for SID'd) in Development system are:
No From number To number Number status   Ext
01 0000000001   2000000000   0000000057
01 0000000001   2000000000   0000000196
01 0000000001   2000000000   0000000107
As per the error message and your reply, i went to SNRO and tried entering the objects: BIM0000093, BIM0000249 and BIM0000318 for the 3 Info objects and clicked the 'Number ranges' button. It appears like these number range objects do not exist.
George.

Is there any way to figure out what this transport error is about?

HI,
I am getting the following transport error from the log:
u201C R3TRROUT4BHOQZTDNV4U6BLY12MUXO6C6 not found; object also deleted in target Systemu201D
Following the information on this site, I looked through all the tables listed under RSUPD* but could not locate R3TRROUT4BHOQZTDNV4U6BLY12MUXO6C6
Also, following the help to see RSA1 -> Update rules -> Extras -> Object Data Directory, it shows the update rules was no local.
The only unique thing about this particular Update Routine, is that the rule source fields include one new field zfield which was an enhancement to 2lis-02_scl. When the Update Rule was transported to Quality, the three fields from the 2LIS, including the zfield (which were mapped in Dev) do not how up in test and hence the transformation becomes u201CXu201D
The model is:     Infosource (from R3) --> Transformation  ODS
The transport of the Transformation to Quality ends with warning but when you go to Quality to check, all the 4 Update Rules in the Transformation were ok, except that the 4th update rule, which automatically becomes u201CXu2019 (No Transformation).
Thanks

Hi,
When i try to collect the transformation in Transport connection, I get the following:
Object '4BHOQZTDNV4U6BLY12MUXO6C6' (ROUT) of type 'Routine' is not availab
in version 'A'
     Message no. RSO252
Diagnosis
     You wanted to generate an object with the name
     '4BHOQZTDNV4U6BLY12MUXO6C6' (in transport request ROUT) of type
     'Routine' (TLOGO). This is, however, not available in the BW Repositor
     database. It does not exist in the requested version A. If the version
     is 'D' then it is possible that an error arose during the delivery or
     installation. If the version is 'A' then the Object was either not
     created or not activated.
System Response
     The object was not taken into account in the next stage of processing.
But I Can't find it to remove or activate.
Any more hints?

Transport Error from BI DEV to BI QUAL in Method Exec

Similar Messages

Maybe you are looking for