Transport error from XI 3.0 to PI 7.0

Hi experts,
While transporting the TPZ files (development previously done in XI 3.0 server, which is now decommissioned) to PI 7.0, there is a problem encountered. The error message is as follows:
import failed because of business system transfer of object
Receiver agreement I Soap_Service_ESA I SAP xyz I Zxyzp_qr_st:Obligatory transport target for business system SAP xyz not found in System Landscape Directory.
While working on the issue we came to know that the GUID might be different for the Software component, Product, which are created in the new PI 7.0 server from the old XI 3.0 Server.
To import the IR or ID objects, we need to do a export/import from old system to new system so that the GUID remains the same.
This is where we are facing issues while importing the tpz files.
Also in our case we donu2019t have the source system, so that we can create the transport targets and then import.
Any solutions for this ? ? ?
Regards,
Abhisek.

Hi
import failed because of business system transfer of object
Receiver agreement I Soap_Service_ESA I SAP xyz I Zxyzp_qr_st:Obligatory transport target for business system SAP xyz not found in System Landscape Directory.
You need to create the business system with name SAP xyz in new SLD. As it is not able to transport objects without this target name.
Thanks
Gaurav

Similar Messages

Transport Error from Dev to QA.

Hi All,
We r facing transport error while transporting req from Dev to QA,
Created queries in dev and try to trasport in QA.
Error:
Execution of programs after import (XPRA)
Transport request   : BD1K922532
System              : BQ1
tp path             : tp
Version and release: 372.04.29 700
Execution of programs after import (XPRA)
End date and time : 20091022031634
Ended with return code: ===> 8 <==
what could be the reason?
Regards,
SD

Hi.
I have collected all neccessary object which query contains, but after releasing the request it shows the message,
The request contains message that have already been edited & transported to other projects. To avoid overshooter problem when importing you need to create dependency information for the request with which object were last transported. The requiered information is listed here together with the existing information.
Should i go ahed with above message???? Is there any dependency?
Regards,
SD

Transport error from dev to quality

HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
      Start of subsequent processing ... 20100409231713
      End of subsequent processing... 20100409231716
Thanks,
kranti

Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
     Start of subsequent processing ... 20091112090953
     End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed

Transport Error from BI DEV to BI QUAL in Method Exec

Hi: Hope youre all having a wonderful day. I am dealing with a brand new installation of BI7 and ECC 6 (on the R/3 side). Recently I activated some extract structures on the R/3 DEV and had them transported on to the Quality box and everything went well. I then had my Multiprovider/Infocubes/Datasourses on the BI dev transported to BI Quality and everything but some objects did not make it thru. I got an error 8. I looked into the error log and it everything but the 'Method Exec' had succesfully transported. The following is a brief excerpt from that;
Cross-system information for user USER123
    Imports with Errors
        BIDEV System BIDEV
              BIK123456              ZMULTPRV_B12-Inspection Results and Related Objects
                BIDEV        System BIDEV
                           Pre-Export Methods      12/07/2007 14:52:28    (0) Successfully Completed
                           Export                           12/07/2007 14:54:29    (0) Successfully Completed
                    Import steps not specific to transport request
                BIQUAL        System BIQUAL
                           Import                                   12/07/2007 16:47:07    (0) Successfully Completed
                           Check Versions                     12/07/2007 16:47:10    (0) Successfully Completed
                           Method Execution                12/07/2007 17:44:30    (8) Ended with errors***********
12/07/2007 16:37:03    (8) Ended with errors
12/07/2007 17:44:30    (8) Ended with errors
                    Import steps not specific to transport request
              BIK123455              ZMULTPRV_B11 (Purchasing) and Related Items
                BIDEV        System BIDEV
                           Pre-Export Methods       12/06/2007 20:15:47    (0) Successfully Completed
                           Export                             12/06/2007 20:17:18    (0) Successfully Completed
                    Import steps not specific to transport request
                BIQUAL        System BIQUAL
                           Import                                   12/07/2007 08:41:43    (0) Successfully Completed
                           Check Versions                           12/07/2007 08:41:46    (0) Successfully Completed
                          Method Execution                         12/07/2007 09:21:42    (8) Ended with errors
                        12/07/2007 05:09:42   (12) Canceled
                             12/07/2007 07:54:59   (12) Canceled
                             12/07/2007 08:34:17   (12) Canceled
                                 12/07/2007 09:21:42    (8) Ended with errors
Start of the after-import method RS_TRCS_AFTER_IMPORT for object type(s) TRCS (Activation Mode)
Start of the after-import method RS_UPDR_AFTER_IMPORT for object type(s) UPDR (Activation Mode)
Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Activation Mode)
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
InfoSource 0PRODUCT_TEXT is not available in source system BIQUAL
Error when activating DataSource 0PRODUCT_TEXT BIQUAL
InfoSource 0PR_BASE_UNIT_ATTR is not available in source system BIQUAL
Error when activating DataSource 0PR_BASE_UNIT_ATTR BIQUAL
InfoSource 0PR_PURCHASE_CATEG_ATTR is not available in source system BIQUAL
Error when activating DataSource 0PR_PURCHASE_CATEG_ATTR BIQUAL
InfoSource 0PR_STATUS_ATTR is not available in source system BIQUAL
Error when activating DataSource 0PR_STATUS_ATTR BIQUAL
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
DataSource 0ABORT_TEXT does not exist in source system R3DEVCLNT200 of version A
Mapping between data source 0ABORT_TEXT and source system R3DEVCLNT200 is inconsistent
DataSource 0ABORT_TEXT does not exist in source system R3DEVCLNT200 of version A
Field AUFBEWORT will not be delivered from DataSource 0ABORT_TEXT in source system R3DEVCLNT200
Field LANGU will not be delivered from DataSource 0ABORT_TEXT in source system R3DEVCLNT200
Field TXTMD will not be delivered from DataSource 0ABORT_TEXT in source system R3DEVCLNT200
Field WERKS will not be delivered from DataSource 0ABORT_TEXT in source system R3DEVCLNT200
DataSource 0ARTICLE_ATTR does not exist in source system R3DEVCLNT200 of version A
Mapping between data source 0ARTICLE_ATTR and source system R3DEVCLNT200 is inconsistent
DataSource 0ARTICLE_ATTR does not exist in source system R3DEVCLNT200 of version A
Field ATTYP will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BEGRU will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BRAND_ID will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BREIT will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BRGEW will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BSTME will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BWSCL will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field BWVOR will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field COLOR will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field DATAB will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field EAN11 will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field ERSDA will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field EXTWG will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Field FREE_CHAR will not be delivered from DataSource 0ARTICLE_ATTR in source system R3DEVCLNT200
Message was edited by:
        BobbySi

Hi Bobby,
You need not to activate the Objects in Q system exculsively. Once your transport request is succesfull from D to Q, the Objects will be ready for data loads. Even same with Transfer, Update Rules (3.5) , Transformations, and Infopackages..and routines..etc. Just re-check the missing object in the transport error log and check whether it has been in another request.
Please get back if you have any questions.
Regards,
-N-

Transport Error from BI Dev to BI Production

Hi all,
I am started the BI transport from BI dev to BI production. we are not having BI quality.
I am transporting the DSO and the total data flow to the production.
I have copy the 0FIAR_O03 DSO to the Z DSO and i am transporting thr Z DSO(ZFIAR_O3) to BI production.
While transportation i am getting below error.
DataSource 8ZFIAR_O3 does not exist in source system EBP740 of version A |
Reading the Metadata of ZFIAR_O3 ...
Creating DataSource 8ZFIAR_O3 ...
Application component DM of DataSource 8ZFIAR_O3 does not exist
Error when creating the export DataSource and dependent Objects
| Error when activating DataStore Object ZFIAR_O3
Please suggest.
I have transported all the objects propely.
Regards,
Macwan James

Hi James,
This issue could be because the Application Component hierarchy might not be installed in Production System.
Collect the Application Components and transport to Production. Then reimport the failed request, should resolve.
Regards,
Chathia.

Is there any way to figure out what this transport error is about?

HI,
I am getting the following transport error from the log:
u201C R3TRROUT4BHOQZTDNV4U6BLY12MUXO6C6 not found; object also deleted in target Systemu201D
Following the information on this site, I looked through all the tables listed under RSUPD* but could not locate R3TRROUT4BHOQZTDNV4U6BLY12MUXO6C6
Also, following the help to see RSA1 -> Update rules -> Extras -> Object Data Directory, it shows the update rules was no local.
The only unique thing about this particular Update Routine, is that the rule source fields include one new field zfield which was an enhancement to 2lis-02_scl. When the Update Rule was transported to Quality, the three fields from the 2LIS, including the zfield (which were mapped in Dev) do not how up in test and hence the transformation becomes u201CXu201D
The model is:     Infosource (from R3) --> Transformation  ODS
The transport of the Transformation to Quality ends with warning but when you go to Quality to check, all the 4 Update Rules in the Transformation were ok, except that the 4th update rule, which automatically becomes u201CXu2019 (No Transformation).
Thanks

Hi,
When i try to collect the transformation in Transport connection, I get the following:
Object '4BHOQZTDNV4U6BLY12MUXO6C6' (ROUT) of type 'Routine' is not availab
in version 'A'
     Message no. RSO252
Diagnosis
     You wanted to generate an object with the name
     '4BHOQZTDNV4U6BLY12MUXO6C6' (in transport request ROUT) of type
     'Routine' (TLOGO). This is, however, not available in the BW Repositor
     database. It does not exist in the requested version A. If the version
     is 'D' then it is possible that an error arose during the delivery or
     installation. If the version is 'A' then the Object was either not
     created or not activated.
System Response
     The object was not taken into account in the next stage of processing.
But I Can't find it to remove or activate.
Any more hints?

DTP transport error after system refresh

Hi Experts,
    The scenario is that Dsystem has already refreshed data from Psystem,and then error occured when transport DTP from D to Q system.
    As per the threads before, i know that we can trace DTP technical name in table RSBKDTP.
    That i show the detail as the field from RSBKDTP in the below,
Before refresh,
System        DTP technical name     DTP original technical name
P                  DTP2                            DTP0
Q                  DTP1                           DTP0
D                  DTP0                            DTP0
After refresh P to D,
System        DTP technical name     DTP original technical name
P                  DTP2                            DTP0
Q                  DTP1                           DTP0
D                  DTP2                         DTP0
Then the transport error from D to Q caused by that the two name underlined is not corresponding.
Could anybody give me advice to solve the problem, if not ,i could only creat a new DTP in D.
I am currently trying to find an solution and I will share if I find. Thanks.
Edited by: rurupolo on Jul 15, 2010 5:20 PM

Hi Friend,
Just activate the DTP2 in D again and transport to Q. It should work.
Regards
Hemant Khemani

Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
for example downloaded all co files and data files
control file: K900470.SAD and Data file: R900470.SAP from transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried to add in the import queues using TCODE: STMS and trying to import.
During import we get the below error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
End with rc : 16
Please help me on this
We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
Thanks & Regards
Murali Papana

Did you see that you tried to transport to an older release!! You should have expected such a result.
Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40.

Error while transporting data from DevBI to QualityBI

Hi all,
After transporting SD cubes,along with some warnings I received the foollowing error in BI quality system..
Master Data Table /BI0/PMATERIAL contains data: Characteristic 0MATERIAL cannot be activated                                        |
SID Table /BI0/SMATERIAL contains data: Characteristic 0MATERIAL cannot be activated                                                |
Text Table /BI0/TMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
I remember that sometimes transport error occurs if there is data inside master data object.Remove the data and transport the infoobject again.Is that right?
Please help me out how to resolve the error.
Thanks.

Thanks for the reply.
I dont have an intention to delete the data from infoobject.
Somewhere I read that transport error results in some cases if there is data inside the infoobject.I am not sure if its correct or not.
Master Data Table /BI0/PMATERIAL contains data: Characteristic 0MATERIAL cannot be activated                                        |
SID Table /BI0/SMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
     | Text Table /BI0/TMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
Inorder to solve the error,what should i do?
Please reply back.

401 Unauthorized:HTTP transport error while calling external WSDL from BPEL

Hi,
I have simple BPEL process whic calls siebel WSDL file through partner link.
I have successfully compiled and deployed BPEL process, when i initiate the Process, instace got errored out at invoke activity.
Error Goes like this
"<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException:
java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 401 Unauthorized</summary>
</part></remoteFault>"
Can anybody help on this issue, Could you please give me possible solution.
Thank youl.

we have not provided any authentication credentials to XMLSpy, we have just uploaded siebel WSDL file then sent the SOAP request with some customer Id then we have received proper response with all desired customer data.
In the same way we tried to call same siebel WSDL file from BPEL process throgh partner link. errored instance has created with 401 unauthorised HTTP transport error..
Do you think is this probem at siebel application side?
We have deployed our BPEL process to SOA server which is having HTTP port 7777.
as per my investigation,i found that we have to open port from siebel side (which WSDL file we are calling) which matches with above HTTP port number.
Do you have any idea on this above clue? Please let us know more details on this.

CHARM error - No Target system for Normal transport generated from another client

Hi Gurus,
This is regarding normal change. We have two clients in development. (Workbench and Customizing)
We were trying to do Automatic import from development client to Quality. When importing the job, I’m getting an error related to Project Status switch. "you cannot import any request for the project at the moment" It works fine for another development client and we can see the target system in Project status switch.
But, checking the Project Status switch, looks like there’s no Target System defined for Normal transport generated from another client of development.
I attached some screenshots related to this.
Can you please help how to add a target system for another client of development ?
Regards,
Salman

yes, client 110 is present in the task list of the project. yes route is defined because it is working for urgent change

Error in Transport Tablespace from linux to windows

I am testing the cross-Platform Transport Tablespace. As per the oracle, we can transport tablespace from linux to windows without conversion because both are using same endian (Little).
But i am fail to do Transport Tablespace from Linux to Windows.
I am performing Transport Tablespace process as following:
from Source Oracle Database server(red had linux as 4 32-bit oracle version:10.2)
Sql> alter tablespace TEST read only;
$ expdp system/pass dumpfile=test.dmp directory=export_dir transport_tablespaces=test transport_full_check=y
after this i am coping test.dmp and data file (test.dbf) to the target machine (ms windows xp 32-bit with oracle 10.1) .
on Target Machine (with Ms windows xp os) here i am giving the following command:
impdp system dumpfile=test.dmp directory=exp_dir transport_datafiles=/exp_dir/test.dbf
but it is giving following error:
ora-39001: invalid argument value
ora-39000: bad dump file specification
ora-31619: invalid dump file "c:\pks\1103.dmp"
what may by ...
Prabhaker

now for version compatibility i am inclusding version option with expdp
edpdp scott dumpfile=1103.dmp directory=pks transport_tablespaces=prabhu version=10.1.0.2.0
but now it is giving following error:
Import: Release 10.1.0.2.0 - Production on Saturday, 11 March, 2006 19:07
Copyright (c) 2003, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "SCOTT"."SYS_IMPORT_TRANSPORTABLE_01" successfully loaded/unloaded
Starting "SCOTT"."SYS_IMPORT_TRANSPORTABLE_01": scott/******** DUMPFILE=1103.DMP DIRECTORY=PKS TRANSPORT_DATAFILES=C:\PKS\PRABHU version=10.1.0
Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
ORA-39123: Data Pump transportable tablespace job aborted
ORA-06550: line 2, column 2:
PLS-00306: wrong number or types of arguments in call to 'BEGINIMPORT'
ORA-06550: line 2, column 2:
PL/SQL: Statement ignored
Job "SCOTT"."SYS_IMPORT_TRANSPORTABLE_01" stopped due to fatal error at 19:07
regards
Prabhu

Hi,how can i transport objects from one server to other like (Dev To Qty)

Hi Sir/madam,
Can u explain how can i transport objects from one server to other like (Development To Quality To Production).
Regards,
Vishali.

Hi Vishali,
Step 1: Collect all Transports(with Packages) in Transports Tab(RSA1)- CTO
Step 2: Release the subrequests first and then the main request by pressing Truck button
Step 3: STMS or Customized transactions
Object Collection In Transports:
The respective Transports should have the following objects:
1. Base Objects -
a. Info Area
b. Info object catalogs
c. Info Objects
2. Info Providers u2013
a. Info Cubes
b. Multi Providers
c. Info Sets
d. Data Store Objects
e. Info Cube Aggregates
3. Transfer Rules u2013
a. Application Components
b. Communication Structure
c. Data Source replica
d. Info Packages
e. Transfer Rules
f. Transformations
g. Info Source Transaction data
h. Transfer Structure
i. Data sources (Active version)
j. Routines & BW Formulas used in the Transfer routines
k. Extract Structures
l. (Note) If the transfer structures and related objects are being transferred without preceding
Base Objects transport (e.g. while fixing an error) it is safer to transport the related Info
Objects as well.
4. Update Rules u2013
a. Update rules
b. Routines and formulas used in Update rules
c. DTPs
5. Process Chains u2013
a. Process Chains
b. Process Chain Starter
c. Process Variants
d. Event u2013 Administration Chains
6. Report Objects u2013
a. Reports
b. Report Objects
c. Web Templates
Regards,
Suman

Transport error while exporting swf to enterprise

Hi all,
OLD scenario : Server OS : Windows2003, BO XI3.1 Client OS : Windows XP , all BO lcient tools and Xcelsius 2008 ..system works fine in all respects
New Scenario : Server OS upgraded to Windows 2008 with out doing any modifications on the running applicaitions.
All client tools are able to connect to BO Application including designer, deski , importwizrd, webirichclient with EXCEPTION Xelcius 2008.
In Xcelsius 2008 with SP1 --> while tring to export to Business objects platform, upon giving username and password and authenticationi (any) ...waits for 3-4 sec ...pops up " Transport Error : Communication Failure" .... same error while importing also ..application is not getting response from server ...
pls guide ...thnx ..
.kishore

Sorry for delayed update .The Issue is resolved after un-checking auto assign port to CMS and assigning port number manually.

No transport error while consuming WCF service in a REST way

Hi,
Here is a small article on when we usually face No Transport error and how to get rid of it.
I recently worked on a sample application using “app for Office” (New in Visual Studio 11.0)
What is “app for Office”?
An app for Office is basically a webpage that is hosted inside an Office client application. You can use apps to extend the functionality of a document, email message, meeting request, or appointment. Apps
can run in multiple environments and clients, including rich Office desktop clients, Office Web Apps, mobile browsers, and also on-premises and in the cloud.
What can an app for Office do?
An app for Office can do pretty much anything a webpage can do inside the browser, such as the following:
Provide an interactive UI and custom logic through      JavaScript. (Develop UI using HTML and JavaScript)
Use JavaScript frameworks such as jQuery.
Connect to REST endpoints and web services via      HTTP and AJAX.
Run server-side code or logic, if the page is      implemented using a server-side scripting language such as ASP or PHP.
As “app for Office” doesn’t have an option to write server side scripting (unlike code behind or in-line coding feature in ASP.NET/MVC) we will have to go for web service or WCF service and consume the service
using any JavaScript framework like Jquery.
I wrote a simple WCF service to hook up with server side code and consumed the service using Jquery as follows
$(document).ready(function () {
$.ajax({
type: "GET",
url: "http://localhost/MyService.svc/rh/data?id=" + $('#sampleType').val(),
processData: false,
contentType: "application/json; charset=utf-8",
dataType: "json",
crossDomain: true,
success: function (data) {
alert(data)
error: function (xhr, status, error) {
alert(error);
I encountered an error saying “No Transport” when I executed the client application.
I did some investigation on this and found out the root cause that cross-domain request was disabled. But I was really not sure whether it was at my WCF service end or “app for Office” client end. I added
Client Access policy and Cross-domain-policy xml files to WCF service in order to enable cross-domain request
so that service will accept any type requests sent form different domains.
Client Access policy
<?xml version="1.0" encoding="utf-8" ?>
<access-policy>
<cross-domain-access>
<policy>
<allow-from http-request-headers="*">
<domain uri="*"/>
</allow-from>
<grant-to>
<resource include-subpaths="true" path="/"/>
</grant-to>
</policy>
</cross-domain-access>
</access-policy>
Cross-domain-policy
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-http-request-headers-from domain="*" headers="*"/>
</cross-domain-policy>
Both the policies should be in different XML files
But this didn’t solve my problem. After a little bit more investigation I found exactly where and how to enable-cross domain requests.
Solution
We need to enable cross-domain requests in environments that do not support cross-domain requests.
“Cors is equal to true if a browser can create an XMLHttpRequest object and if thatXMLHttpRequest
object has a withCredentials property. To enable cross-domain requests in environments that do not support cors yet but do allow cross-domain XHRrequests (windows gadget, etc), set $.support.cors = true;”
You just have to add jQuery.support.cors = true; in your client scripting and it works perfectly fine.
[Cors- Cross-Origin Resource Sharing]
A simple example:
$.support.cors = true;
$(document).ready(function () {
$.ajax({
type: "GET",
url: "http://localhost/MyService.svc/rh/data?id=" + $('#sampleType').val(),
processData: false,
contentType: "application/json; charset=utf-8",
dataType: "json",
crossDomain: true,
success: function (data) {
alert(data)
error: function (xhr, status, error) {
alert(error);
Hope this will be helpful.
Thanks

This is very good technich to resolve the problem. but this is not working in Google chrome or Firfox . can any one help me.

Transport error from XI 3.0 to PI 7.0

Similar Messages

Maybe you are looking for