Transport Error like Number Range Inteval for 0PRODID is missing
Hello
Iam transporting an infoobject to Quality and got an error like Number range interval for 0PRODID is missing.
But the infoobject which iam transporting is not the 0PRODID but is an Attribute.
can you pls let me know what to do.
Hello prasanna
Check with your Infoobject 0PRODID in Quality has got the Number range available.
If not first generate the Number range or go with the RSRV run the test with Master and do the transport
Similar Messages
-
Error in MIGO :Number range object for object J_1IINTNUM, year 2010, excise
Dear Experts,
While posting MIGO, System throws below error :
Mainintain number range object for object J_1IINTNUM, year 2010, excise
Maiintain number range object for object J_1IRG23A1, year 2010, excise
Maintain number range object for object J_1IRG23A2, year 2010, excise
Actually we are posting the MIGO for the fiscal year 2009, still i am getting error why ?
regards
rajakarthik.check the posting date what u r puting , it should be on or before 31/03/2010
i think this is only the issue dont looks like any other issue
or do one thing just o\go in SNRO and for J_1IINTNUM object put 9999 year and the number range
and try to post your transaction in 2009
hope this helps
Edited by: Umakant Bhangale on Apr 1, 2010 10:22 AM -
Maintain number range interval "" for inventory document --help!
Dear all,
I running the FM - L_INV_DOC_CREATE for creating the physical inventory doc for WM ( warehose management ) level. But i get this error -> Maintain number range interval "" for inventory document. If i try to create it using the t-code LI01N,everything goes smoothly. Anybody haf any idea how to solve this? thank you.1.Did u go into Number ranges for WM?
Yes
2.Did u click on assignment & number ranges not on Number range intervals
Yes
3.Di du cahnge it to 02 for all?.
Yes on first warehouse 111 all changed to 02 and on warehouse G02 just on TR and TO changed to 02
4.Did u select NR intervals? and give the number range?
Yes
5.Did u transport the intervals?
No, as I am working on DEV practice client. Dont need to transport.
6.Did assign the number rabges to ur Warehouse?
I assigned No. 2 to warehouse, not number range, can u ellaborate more on number range assignment.
I created migo for same material with different storage location and material and accounting documents are created. Even the number ranges are working on another warehouse created by colleague, but its not working on my warehouse and as mentioned earlier this is Dev practice client. No need to transport. -
Maintain number range object for excise grp
Hi Gurus,
During stock transfer, while doing Goods receipt I am getting the below error
"Maintain number range object for object J_1IRG23D, year 2010, excise group"
Could anyone please tell me the trans code for maintaining no range for excise group...
Thanks,
RajaGo to J1I9 T Code for a particular object object J_1IRG23D, execute and then give the excise group and maintain the number series.
Regards,
Nagesh
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM -
Maintain number range object for object J_1IINTNUM
Dear,
While doing GRN i am getting this error:
Maintain number range object for object J_1IINTNUM, year 2009, excise group
Maintain number range object for object J_1IRG23A1, year 2009, excise group E1
Maintain number range object for object J_1IRG23A2, year 2009, excise group E1
What i did is:
1) I maintained NR for Objects J_1IINTNUM, J_1IRG23A1,J_1IRG23A2 in J1I9 Tcode.
Still i am getting the same error in MIGO.
Regards
Utsav
Edited by: Utsav.agra on Nov 18, 2009 12:24 PMDear Pankaj,
thanks actually i wans maintaining number as 1 instead of 01.
Thanks
Utsav -
Hi Gurus,
When I try to capture deemed export license from J1ILIC01 I get this error
The number range is not maintained for Object/Year: J_1ILIC/
I tried to maintain number ranges in SNRO & SNUM there the changes are saved but I am not able to capture the license and receive the same error again. Please help.Hi
Just check if you have maintained number range for the correct year as shown in error.
Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year. -
Error in Number range object - URGENT
I changed one attribute(let say X) of a characteristic(A) from dis to nav and transported to QA. The transport failed saying that the intervals for the number range object for X does not exist.
In DEV RSRV check on X, A shows no errors
any suggestions how can I fix this probtry attribute change run first if dont work try this
you can increase the number range buffering size... go to se37 use functional module rsd_cube_get and then click on the test/execute(f8) button, then put in your cube name , then for i_obj put in a and then for i_bypass put in x press the execute button. the click on the blue icon next to E_T_DIME. you se your dimensions there. you now need to increase the buffer size for the dimensions that are receiving high volumes of records. so on the same screen not the dimention tht you want to increase the size of, scroll to the right hand side extreme and note down the NOBJECT number starts with BID. then go to transaction SNRO, put in the number you noted down and click on the change icon.
Now in the edit tab on top drop down set up buffering and select main memory.
now under "No. of numbers in buffer type in 500
save and click yes to continue
setting the number range too low will not help in load performance significantly, whereas setting it too high will consume a lot of memory on the application server, which will effect other applications.monitor the memory usage during data loading to find an appropriate number.
hope this helps -
SAP CRM Error: A number range is not assigned to account group
Hi Experts,
We have a stuck BDOC for a BP with "ZEmployee" (custom) role in CRM with error as "Fill in Required fields". We knew this is b'cos one of the mandatory field in not maintained in CRM. After maintaining the mandatory field in CRM; we are re-processing the stuck BDOC and again it is getting into the error message with error "A number range is not assigned to account group Sold-to party".
We have checked the number range and grouping configuration both in ECC and CRM. But still not able to identify the gaps. Is there a detailed step-by-step approach which can be taken up to resolve the issue.
Request you quick response.
Thanks,
Chaudh.HI Chaudh,
I am facing similiar issue. When i am creating BP in CRM WebUI, I am getting an error message: "Error in Transporting Number Range".
Could you please share your findings, how you solved your issue?
Dave -
Number range interval for characteristic 0CSTELMNTYP is missing
All,
I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP. The transport moved fine to my Q environment, but not to prod, The error was as above and
Number range interval for characteristic 0CSTELMNTYP is missing
Message no. BRAIN049
Diagnosis
The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
Procedure
Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
I don't understand this - what do I need to do?
Thanks.
DaveHi Kedar,
I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
Thanks for you help in Advance.
Sudhakar -
Error in number range while testing inbound idoc via we19
hi all,
i have done all configurations but while testing the inbound idoc via we19 i am getting an error 'error in assigning number to idoc'..i checked and found that the number range object for idoc is edidoc in it number interval is defined from 1 to 99
i dont think that anything is wrong with the number object..
Can u tell me how dow i eliminate this error?Increase Higher limit the reason is when you look at current idoc number ( This idoc number already exists ) ,it will not create new idoc number.
System will get the number from SNRO Based on IDOC Object.
Just look at EDIDC and see the current idoc number.
Simple example :
I have one number - 100 ,it is already exists in database,if i insert same record to the database ,did system will accept ?
Thanks
Seshu -
Mass deletion of document number ranges intervals for several company codes
Dear experts,
We are running version ECC6 and are about to go-live a lot of company codes simultaneously. We would like to delete satndard number ranges intervals for these company codes.
Is there a way to delete the number ranges intervals (which have not been used) for several company codes at the same time ? I'm looking for a transaction or a program similar to OBH1 (used for the creation of number ranges ).
Thanks in advance for your help.
Best Regards,
StevenHi
I am also not aware of such T.code to delete number ranges for a company code.
Alternatively, you can go to FBN1 in change intervals mode.
From the Menu Select all and Press Shift + F2 (Delete interval).
Ofcourse, this have to be done individually for each co. code.
Regards -
Number range R4 for object BANF nearly exhausted
Dear,
when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
Best regards
Meng HM>
Meng HM wrote:
> Dear,
>
> when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
> I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
>
> Best regards
>
> Meng HM
Check this path: spro>MM>Consumption based planning>number ranges>define NR for planning run, execute and maintain the interval of planned orders.
Then apply this internval in OPPQ, under number range button.
Edited by: Afshad Irani on Aug 30, 2010 10:34 AM -
Facing problem in Number Range Allocation for Objects in OM
Hello Friends,
I have couple of questions in setting number range for Objects OM :
1) Can we set one single number range for the objects in all planned versions or do we need to set different number ranges for varous planned versions?
2) If we are already using existing Internal Number Range in $$$$ for Objects in OM, how do we set number range External Number range to use it for forthcoming object creation?
3) If we set the External Number Range, will the system use the set num range combinedly for all object types or individually for each object type (Ex: If we have an external num range 100~200, then while creating Org Unit the system may take 100 after that if we try to create another Org Unit the system may take 101 in seqeuence. After creating these two Org Units, if we try create an Position object will the system start allocating the number from 102 or will it again start from 100)
4) Can we default number ranges for various Object Types Planned version wise? If YES, what feature is used to default this number range?
Regards
TharakHi,
For 1). Yes you can set number ranges for all plan versions.
2. You can devide like this.
IN - 00000001 to 49999999
EX - 50000000 to 99999999 - EXT.
3. In my view it is applicable to all Objects.
4. Don't know.
Reward me if helps.
Thanks,
vasu. -
ERROR in number range in F-02, FB60 and all fininace postings
HI All
could you please help us on this issue , ERROR in number range got this error while posting all FI related , we cant able to post documents we are in ready for SIT but in unit testing got this error .
we don't have any clue , kindly share your experiance on thisHi Murthi,
Please check through T Code FBN1 whether you have maintained correct number range for Document type (Check document type in OBA7 and see what number range is maintained) you are posting in that particular company code and fiscal year.
If not maintained please maintain the same. It will solve your problem.
Also you can click on question mark tab in yellow and see the details of error. You can also get the information of error and solution.
Regards,
Pankaj Singh -
Re : Maintain number range interval "" for quants
Hi
While doing the transfer order i am getting the following error.
" Maintain number range interval "" for quants "
How to solve this.
Thanks
Antodear sir
go to Tcode : OMLW click for quants tab, give your warehouse number and maintain the number ranges, for your warehouse.
Regards
jrp
Maybe you are looking for
-
Creating new Data Source Error - Database connection Failed
Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev. Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source. Entered all info about the application database , etc. Getting e
-
I have upgrade to IOS 8 and all Fotos are ereased on my Iphone and on my Computer is only the last Backup and there a no Photos now what can i do?
-
When opening a pdf in gw2012 client, no associated program
Win7prosp1, when trying to open a pdf from an email (double click), I get this message, This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association i
-
Changing oaj2se.exe binary file for form operations
Hi, When you open the form service in R12.1.3, you encounter a page with the following message. In order to access this application, you must install the J2SE Plugin version 1.6.0_07. To install this plugin, click here to download the oaj2se.exe exec
-
How do we find out what the conflicts are when the metadata conflict warning appears?
How do we find out what the conflicts are when the metadata conflict warning appears?