Transport Error on Data Mart Application Component
Hi All,
I have to transportthe export data source for my DSOs. I did use transport collection to make sure all the relevent objects are collected. When I transport the export data sources everything is going fine, but the DM (Application Component for the export data sources fail and put the object in repair status).
The 8* data sources are active and available in the myself source system and the update rules from the DSO to Cube is also active, but the info source is not there because the Data Mart - Application component failed. It says as follows in the transport log.
'Object R3TRAPCODM is in repair status. Therefore, it cannot be imported'.
If the object is in repair status, can I ask the basis guys to re-import with over-write option? will it fix the issue. I could not see the repair statuis on the object as it is an SAP component.
Or
anyone tell me how to transport export data sources. I am in BI 7.0 but using RSA1OLD setup.
Anyclues....?
Thanks,
Alex(Arthur Samson)
I am closing this question. Identified the cause of the error.
Similar Messages
-
Error Caller 09 contains error message - Data Marts loading(cube to ODS)
Dear all,
Please ! Help me in this problem, This is very urgent.
I have one process chain that loads data from BIW to BIW only through Data Marts. In that process chain, one process loads data from one cube(Created by us) & loads data to one ODS(also created by us). Data is loaded through full update & for the selected period specified in 'Calender Day' field in data selection.
Previously I was able to load data for 2 months, but some days ago, suddenly one day, the process of Extraction got stuck in background for long time,& showed following error :
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Then we killed that process on server & after another attempt, It showed some calmonth...timestamp error. Then after reducing data selection period, It had been loaded successfully, after that I was able to load data for 20 days,Again after some days process got stuck,I followed the same procedure,reduced the period to 15 days & continued, Now I can't even load data for 5 Days successfully in one attempt, I have to kill that process in background & repeat it, then sometimes It get loaded.
Pls, suggest some solutions as soon as possible. I am waiting for your reply. Points will be assigned.
Thanks,
Pankaj N. Kude
Edited by: Pankaj Kude on Jul 23, 2008 8:33 AMHi Friends !
I didn't find any short dump for that in ST22.
Actually , What happens is, Request continues to run in background for infinite time. At that time
Status Tab in Process Monitor shows this messages :
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
in the source system
And Details Tab shows following Messages :
Overall Status : Missing Messages or warnings
Requests (Messages) : Everything OK
Data Request arranged
Confirmed with : OK
Extraction(Messages) ; missing messages
Data request received
Data selection scheduled
Missing message : Number of Sent Records
Missing message : selection completed
Transfer (IDOCS and TRFC) : Everything OK
Info Idoc1 : Application Document Posted
Info Idoc2 : Application Document Posted
Processing (data packet) : No data
This Process runs for infinite time, then I have to kill that process from server, & Then It shows Caller 09 Error in Status Tab
Should I Changed the value for that memory parameter of server or not ?. We r planning to try it today, Is it really belongs to this problem, Will it be helpful ? What r the risks ?
Please, give your suggestion as early as possible, I m ewaiting for your reply.
Thanks,
Pankaj N. Kude -
I'd like to move an on-premesis SQL Server Database to SQL Azure. I've used SQL Mgmt Studio to Extract Data Tier Application and save my db as a dacpac file. Now I'm connected to my Azure server and I've chosen to Deploy Data Tier Application. I select my
dacpac and the deploy starts but then on the last step "Registering metadata for database" it times out. I've tried it a couple of times and each time the deployed database is there and appears to be fully populated, but I'm not sure if I can ignore
that error and continue. What is supposed to happen in that step, and should I expect it to fail when deploying to SQL Azure?
I'm following the steps here http://msdn.microsoft.com/en-us/library/hh694043.aspx in the Using Migration Tools > Data-tier Application DAC Package section, except that to deploy there's no SQL Mgmt Studio > Object Explorer [server]
> Management >"Data Tier Applications" node, so I'm deploying by right-clicking on the server name and choosing "Deploy Data-tier Application".
My (total) guess here is that it's deployed the database fine and it's doing whatever magic happens when you register a data tier application, except that it's not working for SQL Azure.
I'm running against a server created for the new Azure service tiers, not against a Web/Business edition server.
The full details of error I get are below.
thanks,
Rory
TITLE: Microsoft SQL Server Management Studio
Could not deploy package.
Warning SQL0: A project which specifies SQL Server 2008 as the target platform may experience compatibility issues with SQL Azure.
(Microsoft.SqlServer.Dac)
ADDITIONAL INFORMATION:
Unable to register data-tier application: Unable to reconnect to database: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft.Data.Tools.Schema.Sql)
Unable to reconnect to database: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft.Data.Tools.Schema.Sql)
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server, Error: -2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.9213&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
The wait operation timed out
BUTTONS:
OKHello,
The registration process creates a DAC definition that defines the objects in the database, and register the DAC definition in the master system database in Windows Azure SQL Database.
Based on the error message, there is timeout error when connect to SQL Database. Did you deploy a large database? When move large data to Azure SQL Database, it is recommended to use SQL Server Integration Services (SSIS) and BCP utility.
Or you can try to create a client application with the Data-Tier Application Framework (DACFx) client tool to import database and handle connection loss it by re-establish the connection.
Reference: http://sqldacexamples.codeplex.com/
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
Error: No valid application component hierarchy exists in RSA5
Hi Gurus,
We have recently installed SAP R/3 for BW. when i get in to RSA5 i am getting error message "no valid application component hierarchy exists" . Do i need to do any settings here. When click enter later on, i can see all the data sources under new_hier_root.
And under new_hier_root i have unassinged notes
New_Hier_root -> unassigned notes -> application components.
Thanks in Advance,
JameelJameel,
first we need to transfer application hierarchy.
try this one SBIW>Business Content DS>Transfer Application Component Hierarchy or RSA9.
Hope this help.
Regards,
Nagesh Ganisetti. -
SBL-DAT-00222: An error has occurred creating business component 'Admin SEA
Hello,
I am also facing simillar issue.
I am trying to create admin account through Siebel Data bean using Business object "Users" and business component "User";
It works from Web client. but fails from siebel databean program.
Following is an error in SCCObjManager log :-
Please ask your systems administrator to check your application configuration.
ObjMgrMiscLog Error 1 0000001650241a04:0 2012-08-13 14:26:48 (busobj.cpp (1666)) SBL-DAT-00222: An error has occurred creating business component 'Admin SEA Application' used by business object 'Users'.
Please suggest.
Siebel Environment details:-
Siebel 8.2.2.0.0 - Windows 2008 R2 SP1
Database - Oracle 11g
We are using database as security adapter.I have never worked with Databeans and neither with Siebel 8.2.2.
But when I look in Siebel 8.1.1.3 Tools at the Business Object 'Users', I don't see the business component 'Admin SEA Application'.
The Business Component does exist, but in a different Business Object.
Perhaps you should review the code of the Databean.
If all else fails, you can try to add it through Business Object 'Employee' and Business Component 'Employee'. -
How to transport Application Component Hierarchy of source system
Hi,
Our BW pulls data from CRM.
In CRM Development, all content/generic datasources are placed under specific nodes in Application Hierarchy which I can see in RSA6.
But all these datasources exist under NODESNOTCONNECTED node in CRM-Quality !!! How can I transport application component hierarchy ??
Any idea?
Regards,
Vikrant.If your application component hierarchy is assigned to local object then first you need to change the package.
Go to TCode: SE03
For Object Type Selection use: DSAA
Object: APCO
Now change object directory from $TMP to the one being used in your porject.
Also check OSS notes:
542454
382471
For changing the paackage:
Go to TCode: SE03
Select option Change Object Directory entries (Under Folder Object Directory)
In the next screen you box Selection by Object you look for the 1st emptly line
Or you can also click on create object directory button
In the Object type box (Small box for 4 chars) type in DSAA or you can also do F4 and find it..
Then in the box next to it you put in the Object Name
In this case it should be APCO (if this does not work try apco_merged)
Select it and hit execute...
OR
try se09 - choose workbench request - cursor position on request, menu - request/task->object list->include object->freely selected objects
under 'selection by type and name' choose 'selected', mark the checkbox on last blank line, and give 'dsaa' and *
in next screen, cursor on 'apco' and click icon 'in request' (include in request), do the same for 'apco_merged'.
release the request and transport. -
Transport Application component hierarchy problem
Hello, I need to transport the App Comp Hierarchy, in our R3 when i do RSA9 it asks for package, but in our ICH and SRM box it didnt prompt the request. I've read the previous posts where create a request and assign a objects manually
as in note 382471
R3TR DSAA APCO
when i try to do this either in our Customizing or ABAP client i get this error..
any idea?
thanks
Error msg below:
Repaired objects cannot be included in dev./correction CD5K900190
Message no. TK180
Diagnosis
In developments/corrections, it is only possible to lock and edit those objects whose original version is located in the logon system.
The object list of your correction contains the object R3TR DSAD APCO. This object is only available as a copy, its original is located in another SAP System.
System Response
The function terminates.
Procedure
Delete the object from the correction before you repeat this function.
Use a repair for changes to this object.
You can assign repairs and corrections to the same request to ensure, for example, that they are part of the same transport.
For more information on the Transport Organizer, see the SAP Library under Basis Components -> Change and Transport System.Hi Mayil,
Logon on to ur development system go to RSA9 then it will pop up u the screen to transfer the application component yes or no , u say yes then it will ask for the package name ,give the package name which u have already created ,
then go to se09 & relase the request ,now logon in to other system eg: - quality system ask u basis person to import that request in to quality -
Error while loading data from application server
Hi all,
Am facing a problem while loading data from application server.
The error i get is ....
*" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
when i copy these values into a CSV onto a desktop and load,load is successful.
Please let me know your views.
Thanks&Regards,
PraveenIt looks like the system is trying to convert Rental/Lease to a number format. Is the info object type CHAR or NUMC or ??? I would look there.
Also, make sure / is in RSKC.
Brian -
Error while transferin intenal table data to application server
*& Report YGL_BALANCES
REPORT YGL_BALANCES.
TABLES:BAPI1028_0,BAPI1028_4,faglflext.
data: f_glacc(10) type c value 'flgl.text' .
DATA: BALANCE LIKE BAPI1028_4-BALANCE,
RETUR LIKE BAPIRETURN,
FISC_YEAR LIKE BAPI1028_4-FISC_YEAR,
FIS_PERIOD LIKE BAPI1028_4-FIS_PERIOD,
DEBITS_PER LIKE BAPI1028_4-DEBITS_PER,
CREDIT_PER LIKE BAPI1028_4-CREDIT_PER,
PER_SALES LIKE BAPI1028_4-PER_SALES.
data:prctr like faglflext-prctr,
racct like faglflext-racct,
rbukrs like faglflext-rbukrs.
types: begin of st_i ,
COMP_CODE LIKE BAPI1028_4-COMP_CODE,
GL_ACCOUNT LIKE BAPI1028_4-GL_ACCOUNT,
FISC_YEAR(4),
FIS_PERIOD(2),
DEBITS_PER(23),
CREDIT_PER(23),
PER_SALES(23),
BALANCE(23),
CURRENCY LIKE BAPI1028_4-CURRENCY,
CURRENCY_ISO(3),
END OF st_i.
DATA: ITAB like BAPI1028_4 OCCURS 10 WITH HEADER LINE.
***********************************************************************jtab like faglflext occurs 0 with header line.
PARAMETERS: COMPCODE LIKE BAPI1028_0-COMP_CODE,
CURRENCY LIKE BAPI1028_5-CURR_TYPE,
YEAR LIKE BAPI1028_4-FISC_YEAR,
ACCOUNT LIKE BAPI1028_0-GL_ACCOUNT.
CALL FUNCTION 'BAPI_GL_GETGLACCPERIODBALANCES'
EXPORTING
COMPANYCODE = COMPCODE
GLACCT = ACCOUNT
FISCALYEAR = YEAR
CURRENCYTYPE = CURRENCY
IMPORTING
BALANCE_CARRIED_FORWARD = BALANCE
RETURN = RETUR
TABLES
ACCOUNT_BALANCES = ITAB.
open dataset f_glacc for output in text mode encoding default.
loop at itab .
transfer itab to f_glacc.
endloop.
close dataset f_glacc.
iam getting error like this
Runtime Errors UC_OBJECTS_NOT_CHARLIKE
Date and Time 01/16/2006 07:09:51
ShrtText
The current statement is defined for character-type data objects only.
What happened?
Error in ABAP application program.
The current ABAP program "YGL_BALANCES" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
Only character-type data objects are supported at the argument
position "f" for the statement
"TRANSFER f TO ...".
In this case, the operand "f" has the non-character-type "BAPI1028_4". The
current program is flagged as a Unicode program. In the Unicode context,
type X fields are seen as non-character-type, as are structures that
contain non-character-type components.
Trigger Location of Runtime Error
Program YGL_BALANCES
Include YGL_BALANCES
Row 48
Module Name START-OF-SELECTION
Source Code Extract
Line
SourceCde
18
FIS_PERIOD LIKE BAPI1028_4-FIS_PERIOD,
19
DEBITS_PER LIKE BAPI1028_4-DEBITS_PER,
20
CREDIT_PER LIKE BAPI1028_4-CREDIT_PER,
21
PER_SALES LIKE BAPI1028_4-PER_SALES,
22
23
ITAB LIKE BAPI1028_4 OCCURS 10 WITH HEADER LINE.
24
*data : wa like itab.
25
26
PARAMETERS: COMPCODE LIKE BAPI1028_0-COMP_CODE,
27
CURRENCY LIKE BAPI1028_5-CURR_TYPE,
28
YEAR LIKE BAPI1028_4-FISC_YEAR,
29
ACCOUNT LIKE BAPI1028_0-GL_ACCOUNT.
30
31
CALL FUNCTION 'BAPI_GL_GETGLACCPERIODBALANCES'
32
EXPORTING
33
COMPANYCODE = COMPCODE
34
GLACCT = ACCOUNT
35
FISCALYEAR = YEAR
36
CURRENCYTYPE = CURRENCY
37
IMPORTING
38
BALANCE_CARRIED_FORWARD = BALANCE
39
RETURN = RETUR
40
TABLES
41
ACCOUNT_BALANCES = ITAB.
42
43
*OPEN DATASET file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
44
*TRANSFER `1234567890` TO file.
45
46
open dataset f_glacc for output in text mode encoding default.
47
loop at itab .
>>>>>
transfer itab to f_glacc.
49
endloop.
50
close dataset f_glacc.
51
52
53
54
*CALL FUNCTION 'WS_DOWNLOAD'
55
EXPORTING
56
BIN_FILESIZE = ' '
57
CODEPAGE = ' '
58
FILENAME = 'C:\KLN.TXT'
59
FILETYPE = 'DAT'
60
MODE = ' '
61
WK1_N_FORMAT = ' '
62
WK1_N_SIZE = ' '
63
WK1_T_FORMAT = ' '
64
WK1_T_SIZE = ' '
65
COL_SELECT = ' '
66
COL_SELECTMASK = ' '
67
NO_AUTH_CHECK = ' 'Hi ,
what is that file type .text ...?
there is some problem as i understand from ur code ...
There actually u have to mention application server path
with file name...
go thru this code ..I hope it will be helpful for u
ELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001
PARAMETERS : p_afile LIKE filename-fileintern LOWER CASE.
SELECTION-SCREEN END OF BLOCK a.
OPEN DATASET p_afile FOR OUTPUT IN TEXT MODE.
*Display this message if the file is not opened successfully
IF sy-subrc NE 0.
MESSAGE e006 WITH 'Error in opening Server file'.
ELSE.
LOOP AT it_display.
TRANSFER it_display TO p_afile.
ENDLOOP.
IF sy-subrc EQ 0.
WRITE : /'File posted successfully'.
ENDIF.
*Close dataset
CLOSE DATASET p_afile.
*Display this message if the file is not closed
IF sy-subrc NE 0.
MESSAGE e006 WITH 'Error in closing Server file'.
ENDIF.
ENDIF. -
Giving Error while generating the Data mart to Infocube.
Hi Gurus,
I need to extract the APO infocube data in to the BW infocube. For that iam trying to generate the data mart to APO infocube .
So, that i can use that data mart as a data source to extract that APO Infocube data in to BW infocube.
In that process iam trying to generate the datamart for APO Infocube . But while generating it is giving errors like below:
Creation of InfoSource 8ZEXTFCST for target system BW 1.2 failed
The InfoCube cannot be used as a data mart for a BW 1.2 target system.
Failed to create InfoSource &v1& for target system BW 1.2.
PLease suggest me what to do for this Error problem.
Thanks alot in Advance.Hi,
Point No : 1
What is Planning Area :
http://help.sap.com/saphelp_scm41/helpdata/en/70/1b7539d6d1c93be10000000a114084/content.htm
Point No : 2
Creation Steps for Planning Area :
http://www.sap-img.com/apo/creation-of-planning-area-in-apo.htm
Note : We will not create Planning Area.This will be done by APO team.
Point No 3 : Afetr opening the T-Code : /n/SAPAPO/MSDP_ADMIN in APO you will be able to see all the planning areas.
Point No 4 : Select your planning area and Goto Extras menu and Click on Generate DS
Point No 5. System automaticall generate the DS in APO (Naming Convention start with 9) and Replicate the DS in BI Map to your cube and load the data.
Regards
Ram. -
Run Time Error while Transferring data to Application server
Hello Abaper's,
I have generated a XML data using the FM : " SAP_CONVERT_TO_XML_FORMAT ".
While transferring the data to a File on Application Server using the statement
DATA : wa_xmltab TYPE truxs_xml_line,
it_xmltab TYPE truxs_xml_table.
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc EQ 0.
LOOP AT it_xmltab INTO wa_xmltab.
TRANSFER wa_xmltab TO FNAME. <<<<<<<<<<<<<< Getting Error here
ENDLOOP.
ELSE.
MESSAGE e004(zmsg5) WITH 'File FNAME not opened'.
ENDIF.
CLOSE DATASET FNAME.
The Run Time Error i am Facing is
Short text
The current statement is only defined for character-type data objects.
Error analysis
For the statement
"TRANSFER f TO ..."
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "TRUXS_XML_LINE". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
Regards
jvHello Volker Binder ,
Thank you . it's now transferring the data to Application sercver. I forgot to try using Binay mode,
Thers is one more problem. There are 10 Records in that internal table that is being converted to XML format,
but the XML data is showing only first 4 records.... the XML data format for the remaining data is not seen.
Actual No. of Records in Internal table :
matnr matkl meins
0-BUY1 012 PC
0-BUY2 012 PC
1 EA
2 012 L
3 01 EA
12 EA
23 001 ST
24 015` EA
28 010 EA
29 015` AU
XML Format for the above 10 fields is :
<?xml version="1.0"?><TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY1</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">PC
</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY2</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">
PC </MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000001</MATNR><MEINS Datatype="C" Length="6">EA</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000002</MATNR
This 4th record data in XML is also incomplete..
The above XML format is generated only for 4 records out of 10 Records.
Please let me know , how can i increase the Size / Memory of the Application server file to accomodate for the reamining Records
Regards
Jv -
Data Source and Application Component
Dear Experts,
I am a beginner of BI and I create a Data Source but I forgot to create an "Application Component" beforehand.
Now I create an "Application Component" individually and trying to drug my "Data Source" to the "Application Component", but failed. It is said that a drug and drop will be ok but I found it is not working.
So my question is:
How to put the Data Source under the "Application Component" ?
Regards,
Sophie QueHi,
After assigning to new application component you need to replicate the application component in target system (BW).
Thanks,
S -
Can we transport Data mart data sources?
Hello Experts,
I have question on Data Marts.
Can we transport Data mart data sources? If yes how is it differant from BW transport process?
Thanks a lot
PadmaHi,
You can't transport data mart datasources. You have to regenerate them in every system.
Cheers,
Kedar -
When opening Firefox 6 I receive 2 JavaScript Application errors; the 1st is "TypeError: Component.classes['''TvtPwmComponent_CID'''] is undefined". The 2nd error is; "TypeError:Components.classes['''componentid'''] is undefined." and upon closing Firefox 6 I receive the following JavaScript error; "ReferenceError:'''M_caFxTBobj''' is not defined."
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Transport error - Data type cannot be changed
I have an infoobject whose data type was changed from NUMC2 to CHAR2. Everything is fine in Dev system. However, when I transport to Q, I get method execution with error message "Data type cannot be changed".
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
InfoO. YHRSGB01 is used in compounding of YHRAUS01: Data type cannot be changed
Characteristic YHRSGB01: The method for SID entry has changed
Characteristic YHRSGB01: The data type has changed from NUMC to CHAR
SID Table /BIC/SYHRSGB01 contains data: Characteristic YHRSGB01 cannot be activated
Text Table /BIC/TYHRSGB01 contains data: Characteristic YHRSGB01 cannot be activated
InfoO. YHRSGB02 is used in compounding of YHRAUS02: Data type cannot be changed
Any ideas please?
-SonnyHi,
1. It will be better if you delete all the data in Development & Quality system for this Objects - Re Activate -collect objects and then transport .
2. InfoO. YHRSGB01 is used in compounding of YHRAUS01
InfoO. YHRSGB02 is used in compounding of YHRAUS02
this two objects are compounded
check weather this Componded Info objects are available in Quality System, if not transport them prior
Regards
Hari
Maybe you are looking for
-
Can anybody help ??????????
hello everybody...right now i'm working on a project which needs to populate a dynamic report .now the problem is that i've to populate the table columns and the rows at the same time......i.e. i hav to populate the report entirely dynamically , vert
-
How to make Meeting invitations(outlook) in ES2 ?
Hi, I have a requirement where I need to send invitaions to goup of members to attend meeting and reminders for that as Microsoft outlook sends. Is there any activity availiable to fulfill the above req. in ES2 ?. FYI :: I know how t
-
Looking for plugins & downloads
Can anyone recommend any sites for getting some plugins and downloads - prefereably free? I'm running Logic Pro 6.4.3 on a 1Ghz G4 with 1 Mb RAM - Someone mentioned AU plugins? I would particularly like interesting keyboard sounds - Mellotron, Choirs
-
I'm in Australia and am attempting to download a recent US TV Show (True Blood Season 3 episode 1 and so on...) but am unable to locate it on iTunes. Could you tell me: 1. why i cant download recent TV shows from the US; 2. If this episode is availab
-
My Hardrive is being recognised as 70gb to small!?
Hi! I recently installed a new hardrive. Its an 80gb western digital. My Motherboard is a Ms-6390. It is being recognised as a 10gb hardrive . Could you please tell me why this is happening and how it could be sorted!? ?( Thanx! Haz