Transport Error: Request in "Release Started" state

Hi all,
I released a request & the release was cancelled due to some issues. Sub-tasks of the request is released but the main request is still in Release Started state.
Now I am not able to assign the objects contained in that request into a new request. The system displays a msg " Object locked by a request in with Release Started state".
Is there a way to unlock these objects from this request?
The system is not letting me to delete this request as well.
Points will be awarded for helpful replies.
Thanks!

Dear Meera Murali,
If the object is locked by another requets,
Go to Se09.
Check in the released or modifiable requests in the Request Status Tab,and click on the Display button,
Now see the request that is locking ur Objects. select it and thin the menu bar,,,beside the recycle bin,,u will find the CHANGE OWNER button in the form of double arrow...and that will change the owner to ur ID.now u delete that request,,
Hope this helps u,,
Assign points if needful...
Best Regards,
VVenkat...

Similar Messages

  • How to cancel release of a transport in "release started" state.

    Hi All,
    I had released a tranport and the tranport is stuck in "Release Started" phase due to issues with one of the objects in the request.
    I believe we can fix this by modifying the object. But for that either the transport has to be fully released or it has to be out of "release started" phase.
    Can anyone please advise as to how do we cancel release of a transport which is in "Release Started" phase?
    Thanks,
    Tirth

    Transaction SE03 offers option "Unlock Objects (Expert tool)", which has a checkbox "set to released".
    You can give this a try, but you should better contact a system administrator ("basis") beforehand, as this is not an ABAP development issue.
    Thomas

  • Database is in 'STARTED' state error???

    Hi,
    Has anyone ran a Job in OEM and encountered this error:
    Database is in 'STARTED' state
    If so, how can I correct this problem. I looked on Metalink and it said to connect tot he DB with the dbsnmp account, but that did nothing.
    Any ideas?

    Im getting the same error! Uing OEM version 9i ... created an RMAN backup job using the wizards which uses a catalog db ... and submited it to run once.
    I get the same error stated above.

  • Error while transporting the request from quality to production of BI

    Dear all,
    When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
               Execution of programs after import (XPRA)
               Transport request   : RBDK904992
               System              : RBP
               tp path             : tp
               Version and release: 372.04.04 700
               Post-import methods for change/transport request: RBDK904992
               Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
               Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
               Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
               Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
               Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
               Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
               The errors affect the following components:
                 BW-WHM (Warehouse Management)
               Post-import methods of change/transport request RBDK904992 completed
                   Start of subsequent processing ... 20080406140407
                   End of subsequent processing... 20080406140408
               Execute reports for change/transport request: RBDK904992
               Reports for change/transport request RBDK904992 have been executed
                   Start of................ 20080406140408
                   End of.................. 20080406140408
               Execution of programs after import (XPRA)
               End date and time : 20080406140408
               Ended with return code:  ===> 8 <===
    Thanks in advance.
    Regards,
    M.M

    Hi,
    First try to figure out the object type from the text obtained by following steps above.
    Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
    After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
    Hope it helps.
    Regards
    Mr Kapadia

  • Error generated while transporting a request using TMS

    Dear Techies,
    While transporting a request iam getting an error message
    "Transport control program tp ended with error code 0247"
    Errors: add to buffer has problems with data- and/or cofile
    Iam not getting any information to resolve the problem. Further In devlopment system iam unable to see the old requests and also new one whcih i have created and released. I tried adding the request manually in TMS, whcih resulted in the above mentioned error.Please suggest some solution

    are you able see the objects when you are expanding the request/task
    Also please check the followings & let us know the result
    1. Goto transaction STMS. Menu verview -> Systems. Select system and Menu Check --> All available option
    2. Goto transaction STMS. Menu verview -> Transport Routes, Menu Configuration --> Check --> All option
    One more thing are you facing this problem with only for one specific request or for all requests
    Edited by: Mrinal Das on Jan 5, 2011 3:10 PM

  • Error 12 when releasing a transport

    I am trying to release a transport, but get an error 12 "The request's target VBQ.500 is client dependant but the target system cannot handle that". VBQ.500 is a virtual system. Anyone have any suggestions for me to check out? I'm at a loss.
    Thanks,
    -- Jackie

    Hello Jackie
    I cannot tell you the reason for the error code. Somehow the CTS "believes" that the target system cannot handle clients and client-dependent objects.
    For the moment I think your main problem is to release your customizing request (or is it a workbench request containing client-dependent repository objects?). Try to change the target of your request. Perhaps the CTS can handle that. It might be necessary to adjust transport routes (transaction STMS) in order to get a "decent" target.
    Is your virtual system VBQ.500 a <b>consolidation system</b>? If not then try to change this (Note: this is a critical SAP basis activity).
    As soon as the request is released you can try to import it into your VBQ.500 system.
    Regards
      Uwe

  • Transport request not releasing

    Hi All,
    While releasing transport request it takes more than 24 hours but still
    not yet released. task has been released. Other requests are releasing and importing going fine. but one request is taking time.
    Regards
    Siva

    Hi Markus,
    This is the task log file.
    1 ETP199X######################################
    1 ETP182 CHECK WRITEABILITY OF BUFFERS
    1 ETP101 transport order     : "EDVK900773"
    1 ETP102 system              : "EDV"
    1 ETP108 tp path             : "tp"
    1 ETP109 version and release : "372.04.36" "700"
    1 ETP198
    4 ETP201 Check target systems buffer: "/usr/sap/trans/buffer/EDV"
    3 ETP203 Buffer "/usr/sap/trans/buffer/EDV" is writeable
    1 ETP182 CHECK WRITEABILITY OF BUFFERS
    1 ETP110 end date and time   : "20081112153053"
    1 ETP111 exit code           : "0"
    1 ETP199 ######################################
    1 ETP199X######################################
    1 ETP183 EXPORT PREPARATION
    1 ETP101 transport order     : "EDVK900773"
    1 ETP102 system              : "EDV"
    1 ETP108 tp path             : "tp"
    1 ETP109 version and release : "372.04.36" "700"
    1 ETP198
    2 EPU230XExecution of the export pre-processing methods for request "EDVK900773"
    4 EPU111    on the application server: "sapdev"
    4 EPU138    in client                            : "200"
    2 EPU235XStart: Version creation of the objects of the request "EDVK900773"
    3 EPU237 Version creation started as update request
    2 EPU236 End: Version creation of the objects of the request "EDVK900773"
    2 EPU231XStart: Adjusting the object directory for the objects of the request "EDVK900773"
    2 EPU232 End:  Adapting the object directory for the objects of the request "EDVK900773"
    2 ETN085 "Adding component vector" " " " " " "
    2 ETN085 "Finished." " " " " " "
    1 ETP183 EXPORT PREPARATION
    1 ETP110 end date and time   : "20081112153058"
    1 ETP111 exit code           : "0"
    1 ETP199 ######################################
    1 ETP199X######################################
    1 ETP150 MAIN EXPORT
    1 ETP101 transport order     : "EDVK900773"
    1 ETP102 system              : "EDV"
    1 ETP108 tp path             : "tp"
    1 ETP109 version and release : "372.04.36" "700"
    1 ETP198
    4 ETW000 R3trans version 6.14 (release 700 - 28.07.08 - 15:52:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 12.11.2008 - 15:31:04
    4 ETW000 control file: /usr/sap/trans/tmp/EDVKK900773.EDV
    4 ETW000 > #pid 1564674 on sapdev (edvadm)
    4 ETW000 > export
    4 ETW000 > file='/usr/sap/trans/data/R900773.EDV'
    4 ETW000 > client=200
    4 ETW000 > buffersync=yes
    4 ETW000 >
    4 ETW000 > use comm 'EDVK900773'
    4 ETW000 R3trans was called as follows: R3trans -w /usr/sap/trans/tmp/EDVE900773.EDV /usr/sap/trans/tmp/EDVKK900773.EDV
    4 ETW000 Connected to DBMS = ORACLE --- dbs_ora_tnsname = 'EDV' --- SYSTEM = 'EDV'.
    4 ETW690 COMMIT "0" "0"
    4 ETW000  trace at level 1 opened for a given file pointer
    4 ETW000
    4 ETW000 ================== STEP 1 =====================
    4 ETW000 date&time        : 12.11.2008 - 15:31:04
    4 ETW000 function         : EXPORT
    4 ETW000 data file        : /usr/sap/trans/data/R900773.EDV
    4 ETW000 buffersync       : YES
    4 ETW000 client           : 200
    4 ETW000 Syslog: k CQ3 : UMGSETTING&                                          rscpexcc 12
    4 ETW000 GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
    4 ETW000 Language    : ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789abcdi(),./:;& (ISO-ARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGLTLVZ1SRZHTHKOROSLHRMSUKETAFISCASHIDZ2Z3Z4Z5Z6Z7Z8Z9)
    4 ETW000 Compression      : L
    4 ETW000 l.s.m.           : VECTOR
    4 ETW000 commit           : 100000
    4 ETW000 table cache      : dynamic
    4 ETW000
    3 ETW673XUse Commandfile "EDVK900773"
    4 ETW000       /* HR_PA_Actions_Setup Actions (PA40) */
    4 ETW000       trfunction: 'W' (customizing transport)
    4 ETW000       trstatus  : 'O'
    4 ETW000       tarsystem : /ALL/    
    4 ETW000       user      : RAHULD
    4 ETW000       date      : 12.11.2008 - 15:30:53
    4 ETW000   1 entry from E070 exported (EDVK900773          ).
    4 ETW000   2 entries from E071 exported (EDVK900773          *).
    4 ETW000  22 entries from E071K exported (EDVK900773          *).
    4 ETW000   5 entries from E071KF exported (EDVK900773          *).
    4 ETW000   1 entry from E070C exported (EDVK900773          ).
    4 ETW000 108 entries from E070A exported (EDVK900773          *).
    4 ETW000   0 entries from CTS_SERIAL exported (EDVK900773          *).
    4 ETW000   1 entry from E07T exported (EDVK900773          *).
    3 ETW678Xstart export of "R3TRTABUT529A" ...
    4 ETW000   0 entries from STABULOG exported (TABUT529A                                   *).
    4 ETW000   1 entry from T529A exported (200CO).
    4 ETW000   1 entry from T529A exported (200DE).
    4 ETW000   1 entry from T529A exported (200DH).
    4 ETW000   1 entry from T529A exported (200EX).
    4 ETW000   1 entry from T529A exported (200HA).
    4 ETW000   1 entry from T529A exported (200IP).
    4 ETW000   1 entry from T529A exported (200PR).
    4 ETW000   1 entry from T529A exported (200RE).
    4 ETW000   1 entry from T529A exported (200SE).
    4 ETW000   1 entry from T529A exported (200SU).
    4 ETW000   1 entry from T529A exported (200TR).
    4 ETW000   1 entry from T529T exported (200ECO).
    4 ETW000   1 entry from T529T exported (200EDE).
    4 ETW000   1 entry from T529T exported (200EDH).
    4 ETW000   1 entry from T529T exported (200EEX).
    4 ETW000   1 entry from T529T exported (200EHA).
    4 ETW000   1 entry from T529T exported (200EIP).
    4 ETW000   1 entry from T529T exported (200EPR).
    4 ETW000   1 entry from T529T exported (200ERE).
    4 ETW000   1 entry from T529T exported (200ESE).
    4 ETW000   1 entry from T529T exported (200ESU).
    4 ETW000   1 entry from T529T exported (200ETR).
    4 ETW679 end export of "R3TRTABUT529A".
    4 ETW000 EDVK900773 touched.
    4 ETW000 EDVK900773 released.
    4 ETW000 4837 bytes written.
    4 ETW000 Transport overhead 30.5 %.
    4 ETW000 Data compressed to 8.5 %.
    4 ETW000 Duration: 0 sec (4837 bytes/sec).
    4 ETW000   0 tables in P-buffer synchronized.
    4 ETW000   0 tables in R-buffer synchronized.
    4 ETW690 COMMIT "512" "512"
    4 ETW000
    4 ETW000 Summary:
    4 ETW000
    4 ETW000   1 COMML exported
    4 ETW000   1 COMMT exported
    4 ETW000   2 DELETE commands exported
    4 ETW000 Totally 22 tabentries exported
    4 ETW000
    4 ETW000  [dev trc     ,00000]  Disconnecting from ALL connections:               496153  0.496153
    4 ETW000  [dev trc     ,00000]  Disconnecting from connection 0 ...                   67  0.496220
    4 ETW000  [dev trc     ,00000]  Closing user session (con_hdl=0,svchp=0x11102c7f8,usrhp=0x111018fc0)
    4 ETW000                                                                            1330  0.497550
    4 ETW000  [dev trc     ,00000]  Detaching from DB Server (con_hdl=0,svchp=0x11102c7f8,srvhp=0x11102ca18)
    4 ETW000                                                                             861  0.498411
    4 ETW000  [dev trc     ,00000]  Now I'm disconnected from ORACLE                    2036  0.500447
    4 ETW000  [dev trc     ,00000]  Disconnected from connection 0                        56  0.500503
    4 ETW000  [dev trc     ,00000]  statistics db_con_commit (com_total=2, com_tx=2)
    4 ETW000                                                                             323  0.500826
    4 ETW000  [dev trc     ,00000]  statistics db_con_rollback (roll_total=0, roll_tx=0)
    4 ETW000                                                                              75  0.500901
    4 ETW000 Disconnected from database.
    4 ETW000 End of Transport (0000).
    4 ETW000 date&time: 12.11.2008 - 15:31:04
    1 ETP150 MAIN EXPORT
    1 ETP110 end date and time   : "20081112153104"
    1 ETP111 exit code           : "0"
    1 ETP199 ######################################
    Regards
    Siva

  • Microsoft Exchange Transport Service....Starting (Does not reach a running state, stops and tries starting again)

    Hi All,
    After installing the lovely update (https://technet.microsoft.com/library/security/ms14-068) that Microsoft released last week. I restarted my exchange 2013 server and now the Microsoft Exchange Transport Service will not start. It is pretty much constantly
    in a starting state. Tried all the standard stuff, restarting the server etc.
    Running on Server 2012 R2
    Hopefully someone can shed some light.
    Pete

    Hi,
    A few questions here :
    - Have you installed all roles on the same server ? ( MultiRole server )
    - If yes, do use the preconfigured receive connectors from Exchange or did you add custom connectors ?
    - Do you have any anti-spam service installed on the server that could be listening on port 25 ?

  • MEssage when Transport request is released

    Hello,
    I want to get a message, when a transport request is released. But this throws no Event (Object CTREQUEST ) .
    Is there any possibility ?
    Thanks and best regards
    Stefanie

    Hi Stefanie,
    Go to SE24 and open the class CL_EXITHANDLER, in the method get_instance, put a breakpoint on the statement
    CALL METHOD cl_exithandler=>get_class_name_by_interface
    Line 14 and release your request and see if the BADI CTS_EXPORT_FEEDBACK is called.
    I cannot check this in my system as i don't have any request to release.
    Regards
    Rajvansh

  • Error while transporting a request

    Hi,
    I am transporting a request having infoobjects into a quality server.
    while transporting its giving error as "Changes cannot be made,display user only".
    but when i checked into Quality server changes has already been made and corresponding related objets like update rules are inactive....
    so can i consider this request as successful transport??
    and if transport is successful then why it is giving such kind of error,....because previously when i have transprted it never gave such error.
    Thanks in advance.

    Hi,
    Transport is not sucessful to Quality system. you donot have sufficient authorization for transporting objects or system is locked for any changes.
    contact BASIS person. and because of this infoobjects (infoobjects used inupdate rules, infoprovider...all are in deactive status).
    check all objects in developement system and create new request and check request before transporting.
    Regards
    Daya Sagar

  • Transport error of request Standard Infocube to HANA Optimised Infocube migration

    Hi ,
    Migration of  Standard info cube to Hana optimized info cube done successfully in Dev System,but while transporting that request in PRD system
    error was coming and error log as follows-

    Hi Herman,
    Thanks for reply.Is there any SAP note or document for this steps?
    My scenario system Landscape like BW DEV-BW PRD.
    Our both  BW System were on Oracle DB. We have migrated oracle DB to HANA DB .
    PRD system infocube have 7 year of data and infocube is Standard Infocube.So we want to migrate all standard infocube to HANA optimized .
    Regards,
    Rajesh Behera

  • System error in asynchronous method start during release of PR

    Hi,
    When trying to release the purchase requisition out of workflow inbox, information message is displayed as "System error in asynchronous method start". After clicking enter to ignore the information message and trying to release the purchase requisition, the same message pops up again.
    Appreciate if someone can please provide help in resolving the issue.
    Thank you.

    Hi Sanju,
    Thank you so much for responding. The user was actually created new in the workflow and there were some missing authorisations. The Basis team fixed the authorisation and the issue is now resolved.
    Really appreciate the help.

  • Increase the DB size in Azure gives the Error " Msg 40197, Level 16, State 1, Line 1 The service has encountered an error processing your request. Please try again. Error code 40671."

    Increase the DB size in Azure gives the following error
    Msg 40197, Level 16, State 1, Line 1 The service has encountered an error processing your request. Please try again. Error code 40671.
    i have used following ALTER query,
    ALTER DATABASE database_name MODIFY (EDITION='Business', MAXSIZE=10GB);
    Regards
    Vel

    Hi Taiye,
    According to your description, in theory, we can modify the size of database, and the T-SQL statement in your post is right. So we need to verify if there is no problem with network when you execute the modification statement, in addition, you must be connected
    to the master database when executing the ALTER DATABASE statement. As the error message, I recommend you login again and connect to the master database then run the statement again.
     For more information, see: ALTER DATABASE (Windows Azure SQL Database)
    If the error is still exist, the Microsoft support engineer will help to solve the problem from backend. Sometime delay might be expected. Your patience is greatly appreciated.
    Thanks,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • Ifference between change request and release request and transport request

    what is the difference between change request and release request and transport request and customization  request?

    Please refer to this link :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
    Regards,
    Praveen
    Pl reward if helpful

  • Warning MSG :  while Transporting a Request to Production

    <b>Hi Friends,
               I got folowing errors while transporting a Request to Production -</b>
    <b>PART 1 .</b>
    +++++++++++++++++++++++++++++++++++++++++++++++++
       NBA        Quality Assurance
                  Selection for Import                     03.05.2006 11:56:02    (0) Successfully Completed
                  Import ABAP Dictionary Objects           04.05.2006 08:56:08    (0) Successfully Completed
                  ABAP Dictionary Activation               04.05.2006 08:56:14    (4) <b>Ended with Warning</b>
                  Import                                   04.05.2006 08:56:34    (0) Successfully Completed
                  Check Versions                           04.05.2006 08:56:47    (0) Successfully Completed
           Import steps not specific to transport request
       NBP        Nobel Production System
                  Selection for Import                     04.05.2006 08:56:35    (0) Successfully Completed
                  Import ABAP Dictionary Objects           27.06.2006 13:55:12    (0) Successfully Completed
                  ABAP Dictionary Activation               27.06.2006 13:55:15    (4) <b>Ended with Warning</b>
                  Import                                   27.06.2006 13:55:36    (0) Successfully Completed
                  Check Versions                           27.06.2006 13:55:51    (0) Successfully Completed
           Import steps not specific to transport request
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++
    <b>PART 2</b> - <b>LOG</b>
      ABAP Dictionary: Activation
      Transport request___: NBDK923224
      System______________: NBA
      tp path             : tp
      Version and Release: 340.16.09 640
      Program start============================================================
      Mass activation
      =========================================================================
      Process..................: nb13_21
      User.....................: DDIC
      Date, time...............: 04.05.2006, 08:56:13
      Platform.................: CUSTOMER-NBA(620)/DB6/AIX/nb13
      Tool.....................: BATCH/RADMASG0
      Log......................: F, /usr/sap/trans/tmp/NBDA923224.NBA
      Program parameters:
      Input medium...............: Transp. request NBDK923224
      Activation method..........: Inactv.
      Chk. mode..................: T
      Version to be activated....: M
      Versions to Be Deleted.....: Delete only active versions
      Lock against paral. exec...: Shared
      Independent statistics log.: being written
      Parallel mode..............: Switched on
      ..Resources................: 50% of Dialog Processes, Maximum 4 Processes
      .Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
      =========================================================================
      No object to be deleted and activated exists
       =========================================================================
       Mass activation
       =========================================================================
       Process..................: nb13_21
       Return code..............: 4
       Program runtime..........: < 1 sec.
       Date, time...............: 04.05.2006, 08:56:13
       Program end==============================================================
       ABAP Dictionary: Activation
       End date and time : 20060504085614
       Ended with return code:  ===> 4 <===
      =========================================================================
       Mass activation
       =========================================================================
       Process..................: nb13_21
       Return code..............: 4
       Program runtime..........: < 1 sec.
       Date, time...............: 04.05.2006, 08:56:13
       Program end==============================================================
       ABAP Dictionary: Activation
       End date and time : 20060504085614
       Ended with return code:  ===> 4 <===
    <b>Can any one tell me why this ? what is the impact of it ??</b>

    hi,
    you must extend the log complete, than you'll see the
    object, which caused the error.
    RC = is only warning:
    All the objects were transported successfully.
    Peculiarities occurred for certain objects. These might
    not have been intentional.
    Example:                                                 A warning is given during a transport if the request contains an object  deletion.                                                ...    
    A.
    Message was edited by: Andreas Mann

Maybe you are looking for

  • Can't load Disqus comments even in safe mode

    Even in Safe Mode with all add-ons disabled, I can't load Disqus comments on any site. I have also tried enabling third-party cookies and pop-up windows and made sure all my plug-ins are up to date. I don't know what else to try. I get the message "D

  • Iphoto Not Updated When Uploading to Internet

    When I go to upload a photo online that's in my iPhoto library - half my photos are missing....or the ones I deleted are showing......What's going on??? Say when I go to change my Facebook profile picture to a new photo I put in Iphoto. I click "uplo

  • Sharing objects in the same package (context)

    Hi, I need a small example or API invocations which shows object sharing beetween two applets in the same package. Thanks.

  • Receiving a FAX or allowing PC user access to idisk file

    Hello everyone, I work with someone who uses a PC and Outlook Express and I need to be able to receive her appointment schedule in some manner. I have Verizon DSL, I followed the Help instructions to set up my ibook to receive a fax and connected a c

  • Import Module Woes

    I'm having some problems trying to import one module into another. Here's the beginning of a module: module namespace bar='http://ceridwen.us/2006/bar'; import module namespace foo='http://ceridwen.us/2006/foo' at 'file://relative_path/to_foo'; Modul