Transport Error When dev to Quality
Transport Error on Quality System
Hi Gurus,
I can face an error when moving query in dev to quality,
Error when activating element 497HY34X0YTB2D1KDTUFYWP4I
Element 497HY3CLJXF0KZL0JNWS8YNUA is missing in version M
Element 497HY59QAKUE8MG206HURGCAA is missing in version M
Please send me your valuable suggestion,
Its very urgent,
Thanks
Dear,
Transporting queries is little different than transporting other objects..
Did you follow the right way..
Kindly check against :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
Also see the discussion :
Query transport
Thanks
Similar Messages
-
Transport error from dev to quality
HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
Start of subsequent processing ... 20100409231713
End of subsequent processing... 20100409231716
Thanks,
krantiStart of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
Start of subsequent processing ... 20091112090953
End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed -
Transport Error from Dev to QA.
Hi All,
We r facing transport error while transporting req from Dev to QA,
Created queries in dev and try to trasport in QA.
Error:
Execution of programs after import (XPRA)
Transport request : BD1K922532
System : BQ1
tp path : tp
Version and release: 372.04.29 700
Execution of programs after import (XPRA)
End date and time : 20091022031634
Ended with return code: ===> 8 <==
what could be the reason?
Regards,
SDHi.
I have collected all neccessary object which query contains, but after releasing the request it shows the message,
The request contains message that have already been edited & transported to other projects. To avoid overshooter problem when importing you need to create dependency information for the request with which object were last transported. The requiered information is listed here together with the existing information.
Should i go ahed with above message???? Is there any dependency?
Regards,
SD -
Transport Error when Importing appset in target system
We are receiving the below error when importing the appset TEST in Quality system.
We have include all the objects in the transport by setting UJT_TRANS_CHG to D for all TLOGO objects.
Any clues to what the problem could be?
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20110519104427
Post-processing taking place in client 100
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet TEST in Client 100 for RFC BI system
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step FILE_SERV_UPD completed without errors
Import Step DATA_TABLE_UPD completed without errors
After Import method for AppSet TEST finished successfully
Start of data checker messages
Missing File/Dir:
Missing File/Dir:
Dimension COSTCENTER's master is empty!
Dimension DATASRC's master is empty!
Dimension PROFITCENTER's master is empty!
BPF: Error reading master data
Invalid attribute name (ACCTYPE) in dimension (CO_ENTITY)
BPF: Validation error; Previous step has no matched step region "BR02"
BPF: Validation error; Previous step has no matched step region "BR05"
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110519104506
Post-import methods of change/transport request BPDK900158 completed
Start of subsequent processing ... 20110519104427
End of subsequent processing... 20110519104506
Execute reports for change/transport request: BPDK900158
Reports for change/transport request BPDK900158 have been executed
Start of................ 20110519104506
End of.................. 20110519104506
Execution of programs after import (XPRA)
End date and time : 20110519104506
Ended with return code: ===> 8 <===Hi Naresh,
Thanks for reply.
We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
As per basis guidance we have executed program SE38--> UJA_DATA_CHECKER on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
If any of you faced similar issue. Please share your input in this regard.
Regards
Amit -
Transport Error when Importing TR to QA system
Hi All,
We are receiving the below error when transporting a TR to Quality system.
Detail Error message:
Execution of programs after import (XPRA)
Transport request : XXXXXX
System : XXX
tp path : tp
Version and release: 372.04.88 701
Post-import methods for change/transport request: XXXXX
on the application server: XXXXXX
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20120210151806
Post-processing taking place in client 500
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet MJN in Client 500 for RFC After Import
Error in remote call of destination After Import
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20120210151806
Post-import methods of change/transport request XXXXXXXcompleted
Start of subsequent processing ... 20120210151806
End of subsequent processing... 20120210151806
Execute reports for change/transport request: DB1K903324
on the application server: mbixq2cs01
Reports for change/transport request XXXXXXXX have been executed
Start of................ 20120210151806
End of.................. 20120210151806
Execution of programs after import (XPRA)
End date and time : 20120210151806
Ended with return code: ===> 8 <===
Can any one have faced this kind of issue while transporting TR? Request to share your tought?
Regards , Trine
Edited by: trine_h on Feb 10, 2012 4:46 PMHi,
Thanks Rich for the help. But I did not find any dump log in ST22.
Here with I am attaching details TR log with Message number, it may give some clue. Sorry I am attaching long messages. I know very difficult for people to got through all the message. Sorry for that.
Log File: /usr/sap/trans/log/DB1R903324.QB2
000001
TP 199
1
000002
TP 162
1
Execution of programs after import (XPRA)
000003
TP 101
1
Transport request : XXXXXXXXXX
000004
TP 102
1
System : QB2
000005
TP 108
1
tp path : tp
000006
TP 109
1
Version and release: 372.04.88 701
000007
TP 198
1
000008
PU 126
2
Post-import methods for change/transport request: DB1K903324
000009
PU 111
4
on the application server: mbixq2cs01
000010
PU 122
2
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20120210151806
000011
PU 186
2
Post-processing taking place in client 500
000012
R7 501
2 E
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
000013
UJT_EXCEPTION 047
4
Start After Import for AppSet XXX in Client 500 for RFC After Import
000014
RSPC 051
3 E
Error in remote call of destination After Import
000015
R7 501
2
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
000016
UJT_EXCEPTION 043
4
Nothing to delete.
000017
PU 133
2 E
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
000018
PU 135
3
RS_AFTER_IMPORT belongs to package RS
000019
PU 136
2 E
The errors affect the following components:
000020
PU 137
2 E
BW-WHM (Warehouse Management)
000021
PU 123
3
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20120210151806
000022
PU 127
2
Post-import methods of change/transport request DB1K903324 completed
000023
PU 128
2
Start of subsequent processing ... 20120210151806
000024
PU 129
2
End of subsequent processing... 20120210151806
000025
PU 110
2
Execute reports for change/transport request: XXXXXXXXXXX
000026
PU 111
4
on the application server: mbixq2cs01
000027
TP 000
3
000028
TP 000
3
000029
TP 000
3
000030
PU 117
2
Reports for change/transport request XXXXXXXXXX have been executed
000031
PU 118
2
Start of................ 20120210151806
000032
PU 119
2
End of.................. 20120210151806
000033
TP 162
1
Execution of programs after import (XPRA)
000034
TP 110
1
End date and time : 20120210151806
000035
TP 111
1 E
Ended with return code: ===> 8 <===
000036
TP 199
1
Regards, Trine -
Getting HTTP transport error: when trying to access the webservices
Hi,
I have created proxy in JDeveloper 10g. When trying to access the webservices, getting the following error:
javax.xml.rpc.soap.SOAPFaultException: exception on JaxRpc invoke: HTTP transport error:
javax.xml.soap.SOAPException: java.security.PrivilegedActionException:
oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html
at oracle.j2ee.ws.client.StreamingSender._raiseFault(StreamingSender.java:578)
at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:400)
at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:113)
at com.tenncare.payment.proxy.runtime.__soap_pipe_execute_ppt_Stub.execute(__soap_pipe_execute_ppt_Stub.java:76)
at com.tenncare.payment.proxy.__soap_pipe_execute_pptClient.execute(__soap_pipe_execute_pptClient.java:69)
at com.tenncare.payment.proxy.__soap_pipe_execute_pptClient.main(__soap_pipe_execute_pptClient.java:43)
Process exited with exit code 0.
Can anyone help me what might be the reason. If you need more information, I can post it in the next.Hi,
Can you just check your end point URL, and try with appending user name and password at the end of it as parrameters like http://<end point URL>&UserName=admin&Password=admin.
Other wise check the SOAP request which is going to server using any tool as SOAP UI.
Regards,
Vikram -
Transporting data from Dev to quality using CMS
hi....Fri's
i am transporting data from development to quality, igetting this error
Workspace was not defined for software component version PROC_SA_PROJECT , 1.0 of unilever.com Assign the software component version in the Landscape Configurator of the Change Management Service to a track..
who will define the workspace for the SWCV, how can i rectify this error.....
thanks in advance
Pasi.hi pasi,
just got to the link
http://host:port/devinf/main.
it will ask for cms user,get the details from basis.
afte login go to LANDSCAPE CONFIGURATOR
there select IR.REP and configure respective
consolidation,production .
please eneter in consolidation field " http://<quality host><port>/rep
and production field as "http://<production host><port>/rep
now select IR.DIR and configure similar to IR.REP and replace rep with dir
give consoldated system(QUALITY system) http://<quality host><port>/dir
and and production field as "http://<production host><port>/dir
now cms is done with configuring part
now add the software component which u want to export .
Thanks & Regards,
Rama Krishna -
How to Transport changes from Dev. to Quality and production
Hello Friends,
I've done the below changes in IR
1.Added idoc in Imported Idocs
2.Added new Interface Mapping
3.Added new Message Mapping
In ID:
Chagned Receiver Agreement
Changed Interface Agreement
Please let me know how i can move the changes to Quality and Production..
Pls. provide me the steps to create Transport and how to transfer.
Thanks in advance!!!
Best Regards
PrasadHi,
By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
We can do some changes to move
Moving Dev to QA changes
1.SLD: are there any changes we need to do.
If you have common SLD, then I doubt if you may need any changes on SLD side.
The Business systems you had used will be the same you may use in Q-Landscape.
2.IR: are there any changes we need to do.
---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
do.I am confused here.
You need to reconfigure all communication channels, if SLD changes are OK then business system will
change automatically and in communication channel just filled in correct IP/password etc.
---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
4.RWB: such as alerts,and if there are any...
--> The Alerts will not be transported....you need to create it as new setup for every box.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm -
Dear Experts,
We are Facing a problem with BS_MAT_OVP_03, We have done some enhancements and it is working very much fine in development and when we move it to Quality we are getting runtime errors, they are not with the enhancements but with in standard code itself.
"ASSERTION_FAILED" " ""CL_USMD_ACC_FLD_PROP_DATA=====CP" or "CL_USMD_ACC_FLD_PROP_DATA=====CM009" "VALIDATE_RETURNED_FLD_PROP"
we are getting above runtime error, Please let us know the reason for issue, If some one have come across.
Regards
SukumarHi Sukumar,
It's because of few generated structures could be in "Inactive" mode for your data model when you move to quality system.
Refer each generated structure from SE11 and activate them individually..this can be a post processing activity everytime you move data model structures from one ECC to other ECC.
Thanks
Praveen -
RMI protocol over JRMP transport error when accessing Discoverer Plus
Hi,
I just upgraded my Discoverer to 9.0.2.54.01. I can successfully access my Discoverer Viewer Workbooks but not my Discoverer Plus. When I try to access Plus, Applet will be started, and then it will prompt the RMI protocol error:
Attempt 1. RMI protocol over JRMP transport: Connection refused to host: 127.0.0.1; nested exception is:*
java.net.ConnectException: Connection refused: connect*
Attempt 2. RMI protocol over http transport : Unable to attach to existing session.*
I used browsers Mozilla3.0.5 and IE7.
Thanks!Hi Andy
It could be a Java incompatibility issue. On one of your client machines try removing Java altogether and then reconnecting to Discoverer Plus. The server should send down a new, clean version of the Java.
Try this and let me know how you get on
Best wishes
Michael -
Transport error when transporting a transformation with formulas/routines
Hi All,
I have migrated some 3.5 dataflow (Datasource, Transfer rules, Update rules, Infosource etc..) to 7.0. I am able to load the datatargets using the DTP's just fine.
The problem I am facing is transporting these dataflows to Quality and Production systems. I am specifically having problem with transporting transformations which has formulas/routines.
I was able to transport the transformations with direct mapping from source field to target fields (no formulas/routines) without any problem and it works fine in Quality system. I tried to transport couple of transformations with formulas/routines, all of them give a shortdump ASSERTION_FAILED (transport fails with error code 12).
I am not sure what the problem is. We are on support package 16. Has anyone faced this problem before? Any suggestions are appreciated.
Points are assured
Thanks,
Sirish.Hi,
What is the dump message you are getting? Check in ST22 and let us know. And try the process which is said in the previous post collect all the transformations through transport connections and transport them.
Khaja -
Transport errors when importing a 4.6 transport in 4.5 system
I am trying to export a customer development class (containing ABAP, function modules, and BOR objects) from a 4.6C system, and import the dev class into a 4.5B system. The 4.6 system is on a NT/Oracle box, and the 4.5B system is on an OS/400 DB2 box.
The import in 4.5 fails with a OS stop 13 error. Some of the objects import correctly, such as the DDIC, and the BOR implementation, but all of the ABAP, function groups, and the ABAP behind the methods of the business objects do not import correctly. So now I cannot modify or delete the BOR object, because SAP thinks it has been fully implemented, but the underlying code is not there. I get the following error: R3TR PROG Y4ARLBXO is missing in object list.
My questions are: Is there anything I need to do to import a 46 transport in a 45 system, especially considering that the 45 system is an AS/400? And how can I modify the object list so I am allowed to add the missing code (assuming the transport will never work)?
Thanks for your help,
AllanHi Naresh,
Thanks for reply.
We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
As per basis guidance we have executed program SE38--> UJA_DATA_CHECKER on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
If any of you faced similar issue. Please share your input in this regard.
Regards
Amit -
Transporting WebServices from Dev to quality to production.
Hi Gurus,
I have created custom web services in my dev system and i am wondering, if i need to create the WSDL's seperatley in QA and PROD systems (for the transported RFC or BPI in theses systems).
Reason being the WSDL in DEV system will point othe the RFC/ BAPI in the dev system only.
Is it required to create new in each system..
Please provide me your pointers.
Thanks and Regards,
Anto.Hi there,
You are mixing two concepts together here.
ABAP components, JAVA components, COBOL components etc are pure SDLC components. In a SERVICE context they are service implementation application components not really the service itself. WSDL is the service contract.
What is all about a service is SERVICE interface, service messages, service data types, service ports, binding and service location.
In a well defined service life cycle methodologies there will be something called seperation of concern which should address how to associated service implementation component should transaport among application layers such as DEV,QA, PROD etc and how to transport service contract as service entities between different layers.
Service entities such as schema are layer independent entities so it should not have a specific layer dependency.
However when you bring all service metadata through a service contract such as WSDL you have to design the WSDL in such a way so that dependency can be minimized.
If you can look into details of Abstract WSDL and Concrete WSDL concept, you know the FACT except service location and binding there is not much depencency specific to a given layer such as DEV or QA.
Thanks -
Transport Error when including Transformations with Formulas
I am attempting to transport a transformation that includes formulas. I am getting an ASSERTION_FAILED short dump and my transport stops with an Error Code = 12. Transformations without formulas or with routines seem to go ok.
Here is a piece of the short dump:
Information on where terminated
Termination occurred in the ABAP program "CL_RSTRAN_RSFO================CP" -
in "COPY_ON_DATABASE".
The main program was "RDDEXECU ".
In the source code you have the termination point in line 51
of the (Include) program "CL_RSTRAN_RSFO================CM01U".
The program "CL_RSTRAN_RSFO================CP" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Job Number..... 15091300
We are currently on NW2004s SP10. I cannot seem to find any OSS notes that are applicable? Anyone have any help?We had to log an OSS Message with SAP to get this fixed. Somewhere in the development of the transformation, the rules with the formula got corrupted, even though it did not appear to be corrupted from the front-end.
Here is the text from the OSS Message:
The problem is that the yuo defined 2 formulas for this
transformation but in table RSTRANSTEPROUT there are 3 active
entries. RULEID 4 is wrong, because this ruleid
is not avialable in table RSTRANFIELD and RSTRANRULE. To delete
an inconsistent ruleid you can use the procedure which is
described in note 983036.
Once we cleaned this up, the transformation transported successfully.
Hope this helps! -
Transporting variant from Dev to Quality
Hi All,
I have Modified Standard Layout (This one is ALV layout ) and saved it , I have assigned to one Transport request ,
I have released that one , But In the quality I am unable to see that one .
anybody please guide me.....
Thanks
Durga Prasad.>
Durga Prasad wrote:
> I have Modified Standard Layout (This one is ALV layout ) and saved it , I have assigned to one Transport request ,
>
> I have released that one , But In the quality I am unable to see that one.
May be i am stupid to ask this, "Was the transport imported to QAS?" Please clarify ...
Because releasing the TR alone does not mean the changes will be reflected in the subsequent systems.
Maybe you are looking for
-
Flex compilation error: line exceeds 32k span
Hi All, I am trying to execute my application being developed in VC7.0 (nw04s sneak preview version) using tabbed layers. I have 3 layers and has the following UI components 1 tab/layer: input form 2 tab/layer: table control 3 tab/layer: table contro
-
Unable to view a Kodak Gallery Slideshow in Firefox but can see it using IE.
I am able to log-in to Kodak Gallery. I am able to see my photo albums. But I am not able to view any pictures when I select the slide show option. I am able to see the slide show when I do the same request using Internet Explorer.
-
Is there a way to password protect certain apps from being used? Example I don't want my child to access my apps while he's using his on the iPad. I don't want to lock him out of the iPad. Let him use Angry birds, but not Sims or Games not appropriat
-
Acrobat X Displaying Embedded PDF at full / 100% zoom
Hi I have embedded a pdf onto my page here http://www.entirefilingbankruptcy.com/bankruptcy-exemptions/alabama/ but it is shrunk too small. The source pdf is also shrunken - http://www.entirefilingbankruptcy.com/bankruptcy-exemptions/alabama-exemptio
-
Creating a Windows installer for Java applications
Hello, I have a question about deployment: I have a pure Java desktop application. Obviously, it's in the form of a JAR file. I want to sell this to users who are "clueless" about Java, so I need to wrap it up in an installer file that does the follo