Transport Error when Importing TR to QA system

Hi All,
We are receiving the below error when transporting a TR to Quality system.
Detail Error message:
Execution of programs after import (XPRA)
Transport request : XXXXXX
System : XXX
tp path : tp
Version and release: 372.04.88 701
Post-import methods for change/transport request: XXXXX
 on the application server: XXXXXX
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20120210151806
Post-processing taking place in client 500
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet MJN in Client 500 for RFC After Import
Error in remote call of destination After Import
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
 BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20120210151806
Post-import methods of change/transport request XXXXXXXcompleted
 Start of subsequent processing ... 20120210151806
 End of subsequent processing... 20120210151806
Execute reports for change/transport request: DB1K903324
 on the application server: mbixq2cs01
Reports for change/transport request XXXXXXXX have been executed
 Start of................ 20120210151806
 End of.................. 20120210151806
Execution of programs after import (XPRA)
End date and time : 20120210151806
Ended with return code: ===> 8 <===
Can any one have faced this kind of issue while transporting TR? Request to share your tought?
Regards , Trine
Edited by: trine_h on Feb 10, 2012 4:46 PM

Hi,
Thanks Rich for the help. But I did not find any dump log in ST22.
Here with I am attaching details TR log with Message number, it may give some clue. Sorry I am attaching long messages. I know very difficult for people to got through all the message. Sorry for that.
Log File: /usr/sap/trans/log/DB1R903324.QB2
000001
TP 199
1
000002
TP 162
1
Execution of programs after import (XPRA)
000003
TP 101
1
Transport request : XXXXXXXXXX
000004
TP 102
1
System : QB2
000005
TP 108
1
tp path : tp
000006
TP 109
1
Version and release: 372.04.88 701
000007
TP 198
1
000008
PU 126
2
Post-import methods for change/transport request: DB1K903324
000009
PU 111
4
on the application server: mbixq2cs01
000010
PU 122
2
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20120210151806
000011
PU 186
2
Post-processing taking place in client 500
000012
R7 501
2 E
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
000013
UJT_EXCEPTION 047
4
Start After Import for AppSet XXX in Client 500 for RFC After Import
000014
RSPC 051
3 E
Error in remote call of destination After Import
000015
R7 501
2
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
000016
UJT_EXCEPTION 043
4
Nothing to delete.
000017
PU 133
2 E
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
000018
PU 135
3
RS_AFTER_IMPORT belongs to package RS
000019
PU 136
2 E
The errors affect the following components:
000020
PU 137
2 E
BW-WHM (Warehouse Management)
000021
PU 123
3
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20120210151806
000022
PU 127
2
Post-import methods of change/transport request DB1K903324 completed
000023
PU 128
2
Start of subsequent processing ... 20120210151806
000024
PU 129
2
End of subsequent processing... 20120210151806
000025
PU 110
2
Execute reports for change/transport request: XXXXXXXXXXX
000026
PU 111
4
on the application server: mbixq2cs01
000027
TP 000
3
000028
TP 000
3
000029
TP 000
3
000030
PU 117
2
Reports for change/transport request XXXXXXXXXX have been executed
000031
PU 118
2
Start of................ 20120210151806
000032
PU 119
2
End of.................. 20120210151806
000033
TP 162
1
Execution of programs after import (XPRA)
000034
TP 110
1
End date and time : 20120210151806
000035
TP 111
1 E
Ended with return code: ===> 8 <===
000036
TP 199
1
Regards, Trine

Similar Messages

Transport Error when Importing appset in target system

We are receiving the below error when importing the appset TEST in Quality system.
We have include all the objects in the transport by setting UJT_TRANS_CHG to D for all TLOGO objects.
Any clues to what the problem could be?
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20110519104427
Post-processing taking place in client 100
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet TEST in Client 100 for RFC BI system
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step FILE_SERV_UPD completed without errors
Import Step DATA_TABLE_UPD completed without errors
After Import method for AppSet TEST finished successfully
Start of data checker messages
Missing File/Dir:
Missing File/Dir:
Dimension COSTCENTER's master is empty!
Dimension DATASRC's master is empty!
Dimension PROFITCENTER's master is empty!
BPF: Error reading master data
Invalid attribute name (ACCTYPE) in dimension (CO_ENTITY)
BPF: Validation error; Previous step has no matched step region "BR02"
BPF: Validation error; Previous step has no matched step region "BR05"
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
 BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110519104506
Post-import methods of change/transport request BPDK900158 completed
 Start of subsequent processing ... 20110519104427
 End of subsequent processing... 20110519104506
Execute reports for change/transport request: BPDK900158
Reports for change/transport request BPDK900158 have been executed
 Start of................ 20110519104506
 End of.................. 20110519104506
Execution of programs after import (XPRA)
End date and time : 20110519104506
Ended with return code: ===> 8 <===

Hi Naresh,
Thanks for reply.
We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
As per basis guidance we have executed program SE38--> UJA_DATA_CHECKER on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
If any of you faced similar issue. Please share your input in this regard.
Regards
Amit

Transport errors when importing a 4.6 transport in 4.5 system

I am trying to export a customer development class (containing ABAP, function modules, and BOR objects) from a 4.6C system, and import the dev class into a 4.5B system.   The 4.6 system is on a NT/Oracle box, and the 4.5B system is on an OS/400 DB2 box.
The import in 4.5 fails with a OS stop 13 error.   Some of the objects import correctly, such as the DDIC, and the BOR implementation, but all of the ABAP, function groups, and the ABAP behind the methods of the business objects do not import correctly.   So now I cannot modify or delete the BOR object, because SAP thinks it has been fully implemented, but the underlying code is not there.   I get the following error: R3TR PROG Y4ARLBXO is missing in object list.
My questions are:   Is there anything I need to do to import a 46 transport in a 45 system, especially considering that the 45 system is an AS/400?   And how can I modify the object list so I am allowed to add the missing code (assuming the transport will never work)?
Thanks for your help,
Allan

Hi Naresh,
Thanks for reply.
We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
As per basis guidance we have executed program SE38--> UJA_DATA_CHECKER on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
If any of you faced similar issue. Please share your input in this regard.
Regards
Amit

Error when import BI content 3.5.3

Hi All
I have error when import BI content 3.5.3 step at Tcode 'SAINT' (file SAPKIBIFIH.car) for mySAP ERP 2004 (ECC 5.0 IDES).
The error occur in step 3/5 after enter SAINT:Passw request.
System shown information "Queue SAPKLTHQ10 has not yet been confirmed".
In step 4/5 sytem shown statue/remarks "The Add-on installation terminated during phase PROLOGUE".
I think about installation THAI font package at Tcode "SMLT" uncompleted.
I run report "RSCPINST" at Tcode "SE38" for editing codepage after that the system shown error message "MDMP is not supported foe SAP Business Information Warehouse. Message no.RIN010" Please see sap note 563975.
Note: When i import Thai font package "SAPKLTHQ10" using Tcode "SMLT" the system shown error message "TL1277" in define schedule job step.
Message no. TL137
Diagnosis
You want to start the post-import methods for special texts (calendar texts, terminology, and glossary) for language Thai.
Before this can happen, the system checks whether this server is prepared for this language. The system also checks whether the language environment can be switched dynamically on this server (see ABAP command SET LOCAL LANGUAGE).
System response
The system established that the language environment cannot be switched to language Thai.
The language transport is stopped at this point.
Procedure
The switch of the language environment may fail for the following reasons:
1. The database codepage is not up-to-date.
2. The codepage information for language Thai is not up-to-date.
3. Locales for language Thai do not exist, or are invalid, at the operating system level.
4. The profile parameter zcsa/installed_languages has to be adjusted.
If an error occurs, proceed as follows:
1. Find out the name of the server on which the language import job ran. Log on to this server.
2. Check the language configuration using report RSCPINST. Solve the reported problem there.
If your system consists of multiple application servers and not all of them have authorization for language Thai, continue the language import on a server that has authorization for language Thai.
plaese help me to solve this problem.
thank a lot for all solutions.
Mooping.

This is a long story that you write, but your problem seems just that you must "Confirm the queue". Is that correct?
Without this step no further Support Packages can be inserted into the system. Confirming the queue is done by one of the buttons in the SPAM transaction. Just put the mouse on the buttons and read the quick help to differentiate between the buttons.
I have never had a problem like this but I think it can happen if, together with the new BI version you also include one or more support packs. This happens automatically if these packages are available, so you may not even have noticed it.

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

XSLT transformation error when importing target group in CRM Survey cockpit

Hi,
I created a target group using the segment builder and exported that to a local file. Then when creating a survey using CRM survey cockpit (tcode: SURVEY) and trying to import the same target group from the local file; I get an error :
"Error when applying a XSLT transformation"
System Response
Data transformation cannot be executed. Application functions that depend on the transformation cannot be executed
I tried various file formats : RTF, TXT, XLS, HTML but still I get the same error. Export to XML option is neither available while exporting from segment builder nor while importing into Survey cockpit. The target group is not empty.
Are there any settings to be maintained to resolve the error ?????
Dhaval.

Hi Suhel,
Thanks for the response... as far as my understanding goes, the crm survey suite can be used for maintaining questoinnaires that are transaction specific. also the functionality of question tables and rows is not available in the survey suite but is available in the survey cockpit (tcode: SURVEY).
However the same does not allow me to refer to the target groups created using the segment builder.... Is there a way I can use the target group created through the segment builder in the survey cockpit ????
Dhaval.

Error when importing CO Hierarchies from R/3 DEV to R/3 QAS

Dear SDN,
I am getting the following error when importing Cost center and cost element hierarchies from R/3 DEV to R/3 QAS...
Object OSOA 0COSTCENTER_0101_HIER has not yet been imported successfully
Object OSOA 0COSTELMNT_0102_HIER has not yet been imported successfully
Ended with Return code ===8...
But The two hierarchies were available in R/3 QAS and also i am able to utilise..
My doubt is if i transport these hierarchies from R/3 QAS to R/3 Production any major issues...
Now i want to test a data in BW DEV from R/3 Production data...
So, I am planning to transport These hierarchies from R/3 QAS to R/3 PROD...
Here we do not have BW QAS...So, getting data from R/3Production to BW DEV and testing...
After testing Directly use in BW Production...
So, Please suggest me why when importing these hierarchies errors occuring???
Help will be greatly appreciated with points...
Thanks in advance...

Hi Venkat,
Please go through the following threads...
Hierarchy Transports
Transporting cost center and profit center standard hierarchies
/community [original link is broken]://Transporting a hierarchy
Transport Hierarchy
Khaja

Error when importing ST_PI 2005_1_620

Hi
I am getting error when importing ST-PI 2005_1_620 in of our system.
Here is the details on the log:
Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L started at 20081027152321
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Errors occurred during post-handling PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L
PRGN_AFTER_IMP_ACTGROUP_ACGR belongs to package S_PROFGEN
The errors affect the following components:
BC-SEC-USR-PFC (Authorization and Role Management)
Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L ended at 20081027152325
Looking for your expert advise.
Thanks

Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Have you reviewed the role?
Regards
Juan

CL_SFW_SYSTEM_SETTINGS error when importing SPs

When we want to import the support packages SAP_BASIS, SAP_ABA, SAP_BW,
PI-BASIS untill packages level 7 ( we come from level 4) and the HR
untill package level 26 we run into the short text error when importing
the basis, aba, pi-basis and bw package.
I tried to use the following notes:
1281321 but this gives the error: DEQUEUE_ENQBADIIMPL_ENH
1483283 but this fails also as when I perform tp unlock_EU <SID>
pf=/usr/sap/<sid>trans/bin/TP_DOMAIN_<SID>.PFL it tells me it need to be done
via SE03.
1532661 this one sents me to note 1414700 and 1366282 but the last ones
sents you back to 1483283 and note 1414700 when I want to implement it
with snote it tells me I need to use transaction SE03 for system settings.
Is there any other option to get this issue fixed? as we need to upgradesome other systems aswell with these support packages
Dump message is:
Runtime error SYNTAX_ERROR
Datum en tijd 27.06.2011 14:05:47
Korte tekst
 Syntax error in program "CL_SFW_SYSTEM_SETTINGS========CP ".
Wat is er gebeurd?
 Error in the ABAP Application Program
 The current ABAP program "CL_SFW_RO_FACTORY=============CP" had to be
 terminated because it has
 come across a statement that unfortunately cannot be executed.
 The following syntax error occurred in program
 "CL_SFW_SYSTEM_SETTINGS========CP " in include
 "CL_SFW_SYSTEM_SETTINGS========CCIMP " in
 line 215:
 "Type "SFW_BF_STATE_CHANGE" is unknown"
 The include has been created and last changed by:
 Created by: "SAP "
 Last changed by: "SAP "
 Error in the ABAP Application Program
 The current ABAP program "CL_SFW_RO_FACTORY=============CP" had to be
 terminated because it has
come across a statement that unfortunately cannot be executed.
enanalyse
The following syntax error was found in the program
CL_SFW_SYSTEM_SETTINGS========CP :
"Type "SFW_BF_STATE_CHANGE" is unknown"
Startpunt van runtime error
 Programma CL_SFW_RO_FACTORY=============CP
 Include CL_SFW_RO_FACTORY=============CCIMP
 Regel 1.889
 Moduletype (METHOD)
 Modulenaam INIT
1862 obj = obj.
1863 ENDMETHOD. "create_object
1864
1865 method get_instance_for_locals.
1866 create object reg.
1867 reg->obj_factory = factory.
1868 ENDMETHOD. "get_instance_for_locals
1869
1870 ENDCLASS. "lcl_sfw_obj_registry IMPLEMENTATION
1871
1872
1873 ----
1874 * CLASS lcl_sfw_system_settings IMPLEMENTATION
1875 ----
1876 *
1877 ----
1878 class lcl_sfw_system_settings implementation.
1879
1880 method get_instance.
1881 if ( singleton is initial ).
1882 create object singleton.
1883 singleton->init( ).
1884 endif.
1885 instance = singleton.
1886 ENDMETHOD. "get_instance
1887
1888 method init.
>>>>> me->system_settings = cl_sfw_system_settings=>get_instance( ).
1890 ENDMETHOD. "init
1891
Edited by: C. Bults on Jun 27, 2011 2:35 PM
Removed customer system name

The following is the solution.
Symptom
When you import the Support Packages SAP_BASIS 7.00 Support Package 14 and
Support Package16 in a queue, the runtime error SYNTAX_ERROR occurs in
class CL_SFW_SYSTEM_SETTINGS (program CL_SFW_SYSTEM_SETTINGS========CP).
More Terms
Syntax error, CL_SFW_SYSTEM_SETTINGS, SPAM, SYNTAX_ERROR,
CL_SFW_SYSTEM_SETTINGS========CP
Cause and Prerequisites
This problem is due to a program error.
Solution
Option 1:
Import Support Package 14 and Support Package 16 in separate queues.
Option 2:
After the error mentioned above occurred, regenerate the enhancement spot
SFW_SWITCH_CHANGED in transaction SE18.
To do this proceed as follows:
1. Call transaction SE18.
2. Enter the enhancement spot SFW_SWITCH_CHANGED.
3. Choose "Display".
4. Choose the menu option "Enhancement Spot -> Activate".
You can now import the queue using the Support Package Manager

Error when importing data using DTW template

Dear All gurus/experts,
I have a problem when importing data into SBO system using DTW. The error message is "sort error, pls check the prepared data and delimeter. I use SBO 2004 SP 00 PL 41. I don't understand to cope with this problem, I have no idea anymore. I appreciate your answer. TIA
Rgds,

Tks for your reply. I have seen it and the error message relates to delimeter. I have tried to correct the error by recreate the file and save as tab delimeted. Right now I am trying to import the files.
Rgds,

Transport Error in Import at QAs

Hi mates,
I collected standard objects and transported from DEV to QAs but I received the following error message:-
Selection for Import - Completed
Import - Completed
Check Versions - Completed
Method Execution - ENDED with ERRORs
Ended with return code: ===> 8 <===
Please advice

John
Just for FIAP- Transactional figures it should not take anything more than half an hour maximum. You are saying it's running since more than 12 hours so there must be some thing wrong.
1 Check How many objects you collected under one transport. Don't combine too many objects under one request. Collect only few objects in one transport
2 Check whether the job is still running or not. If it is running cancel the job and collect these objects again under new transport request and import that into Q system with Over write option so that it over writes if any objects already imported.
Hope this helps
Thnaks
Sat

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

Error when updating Idocs in Source System

Hi All,
We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
Error when updating Idocs in Source System
Could anyone please let me know what can be done ?
Thanks
con

Hello All,
I have same problem but its RESOLVED by the following process.
Step - 1
execute the Function module "SCP_LANGUAGES_IN_INSTANCE". It may or maynot give some output. Just note if it give the output
Step - 2
in Transaction SE38 execute the program "RSCPINST".
Just Click on the Activate button (dont select anything).
Step - 3
Again do the same thing specified in Step - 1. Now it will give the output saying that Language is DE.
So by the above procedure my issue is been resolved.
Regards
Sankar

Error when jumping to the OLTP system

Hi Gurus,
Some data loads are failed, when our BI consultant tries to analyse the issue, he getting the error " error when jumping to the OLTP system " " Screen output without connection to user"
We are using BI and ECC 5.0 as back end system.
Please let us know how to resolve the issu.
Thanks in advance
VJ

Hello,
I have changed user to Dialog user but still the the same issue.
Please guide me how to go ahead.
VJ

ORA-907 ERROR WHEN IMPORT (COMMENT 처리)

제품 : ORACLE SERVER
작성날짜 : 1997-10-15
ORA-907 ERROR WHEN IMPORT (COMMENT 처리)
========================================
ORA-907: missing right parenthesis error
이 error 는 export 한 table 을 create 시 comment 를 사용한 경우 발생하는 ORACLE error 이다.
이는 version 8.0.4 에서 fix 되었다.
이를 해결하기 위해서는 미리 table create script 를 돌려 temp_table 을
create 하십시오.
이 때 comment 를 모두 뺀 상태로 create 한다. 또는 /* */ 는 괜찮다.
이후 INSERT INTO temp_table select * from original_table ;
을 실행합니다.
즉 original_table 을 temp_table 로 copy 한 후
drop table original_table;
rename temp_table to original_table ;
을 한 후 table을 다시 export해서 다른 machine으로 import한다.
또 이 -- 를 없애는 방법으로 아래의 C program을 이용할 수 있다.
/* file name : cnvt_dmp.c
* This program is to covert double dash remark expression
* C language stype remark expression.
#include <stdio.h>
#define MAXWORDS 4
char s_reserve[4][100]={ "NOT NULL", "CONSTRAINTS",")",","};
int dash2remark();
void main(argc,argv)
int argc;
char *argv[];
FILE f_in, f_out;
int i,j,lreserve;
int chr1,chr2;
char str1[100],str2[100],str3[100];
if( argc != 3 ) {
printf(" usage : cnvt_dmp infile.dmp outfile.dmp \n");
exit(0);
if( (f_in = fopen(argv[1],"r")) == NULL ) {
printf("could't open the source file.: %s\n",argv[1]);
exit(0);
if( (f_out = fopen(argv[2],"w")) == NULL ) {
printf("대상화일을 생성할 수가 없습니다.\n");
exit(0);
j = i = 0;
while( (chr1 = fgetc(f_in)) != EOF && !ferror(f_in)) {
if( chr1 == 'D' ) {
str1[0]='D';
fputc(chr1, f_out) ;
for(i=1;i<7;i++) {
chr1 = fgetc(f_in);
str1[i] = chr1;
fputc(chr1, f_out) ;
str1[7] = 0;
strcpy( str2,"DEFAULT");
if ( strcmp( "DEFAULT",str1) == 0 ) {
lreserve = 0;
i =0;
while( (chr2 = fgetc(f_in))!= ','){
if ( chr2 == ')') break;
str2[i] = chr2;
if ( chr2 == '-' )
lreserve = 1;
i++;
str2[i] = chr2;
str2[i+1] = 0;
printf(" lreserv => %d, str2=>%s\n",lreserve,str2);
if (lreserve) {
dash2remark(f_in,f_out,str2);
else {
for( i=0;i<strlen(str2);i++) fputc(str2,f_out);
else {
fputc(chr1, f_out );
fclose(f_out);
fclose(f_in);
return;
int dash2remark( f_in,f_out,str)
FILE f_in,f_out;
char *str;
int i,j,start_pos=-1,end_pos=-1;
for( i=0; i < strlen(str); i++ ) {
if ( str[i] == '-') {
start_pos = i;
for( j =0 ; j < MAXWORDS; j++){
if (strncmp(s_reserve[j],str+i,strlen(s_reserve[j]))== 0){
end_pos = i;
if ( start_pos > 0 ) {
for(i=0;i< (start_pos-1); i++)
fputc( str[i],f_out);
fputc('/',f_out); fputc('*',f_out);
for(i =i+2;i<(end_pos-1);i++)
fputc(str[i],f_out);
fputc('*',f_out); fputc('/',f_out);fputc(' ',f_out);
for(i;i<strlen(str);i++)
fputc(str[i],f_out);
else {
for(i=0;i<strlen(str);i++)
fputc(str[i],f_out);
return(1);
이상입니다.

Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
If you need more information, you will must see the next DOC-ID on Metalink site,
Note:121971.1
Luck.
Have a good day.
Regards.

Transport Error when Importing TR to QA system

Similar Messages

Maybe you are looking for