Transport failure due to reason Compounded character produced totall lenght

Hi All,
I did transport from DEV to EBP of one info object CCHIUSRAM.
But the transport failed due to reason that "Compound with char CCHISRAM producess total length of 77 where max length allowed is 60".
Did a check:
Lenght of the CCHIUSRAM object is 1.
There are three charcteristcis which are compunded with this info object.
Each one has lenght of 4,32,12.
So total lenght of that CCHIUSRAM object is 49.
These compunded info object doesnot have any other compunding character in it.
SO total lenght of the CCHIUSRAM object is 49 but don't know how it is showing 77 and due to which transport is failing.
Kindly guide points will be assigned.
Thanks & Regards,
Vaishali

Hi
Could you reactivate all your compounding charecteristics and the charecteristics and check once.
I think the infoobjects undergone changes and interrelated tables are not consistenly updated and if you reactivate it may solve
Regards

Similar Messages

Logon failure due to an internal error

Hi,
We have installed XI 3.1 SP3 (plus fixpacks) on a server and I am trying to access Web Intelligence on the client machine. I get the error "Logon failure due to an internal error." Any ideas what the problem may be?
I can login into Web Intelligence when on the server directly using remote desktop. I am on SP3 on the client machine but may not be on the same level for fixpacks - will check. Could that be the problem?
I can access the CMC from the client machine.
Thanks

Hi All,
I'll start by describing the basic logon connections made by all the client tools when connecting to a Business Objects CMS. From this hopefully it will help resolve the kind of issues described here.
------------------Background------------------
The CMS has a port number (6400). This port number is actually the port number of the name server. This name server stores the name, type of server, hostname and port for all the BusinessObjects servers that exist in the cluster. Whenever a program (such as a client tool) needs to know how to connect to a particular server, the name server will reply with the hostname (or IP) and port number to connect to. When each Business Objects server process starts it will register with the name server and tell it what its connection info (hostname and port) are.
In the case of a client logon it will first connect to the name server and then request the information to connect to the CMS service - (note that the name server and the CMS service are two logicial and seperate functions that the CMS process performs). The CMS service actually runs on the request port of the CMS.
------------------Cause of Logon Failures------------------
If you have no explicitly configured it, the hostname returned for connection could be the fully qualified name OR the short hostname of the machine and the port number will be random (and change each time the process is started). The client ALSO needs to be able to connect to the hostname and port returned by the name server to continue processing. If it can't then you will receive a logon error - in designer/desktop intelligence this will appear as a 'Transport Communication Error' in the deatils of the error message.
------------------Example------------------
You initially connect to boeserver.mycomp.com:6400. boeserver.mycomp.com is a DNS name that the client computer can resolve and the port 6400 is open through the firewall. The client connects to the name server (within the CMS process) and requests the connection information for the CMS services but these have not been explicitly set in the CMC->Server->CMS->Properties page.
The response from the nameserver might be to connect to the short name of the host: boeserver on port 54393 (or some other random port number). You will get a logon error if EITHER the hostname boeserver cannot be resolved (which can be quite common when the boeserver machine is in a different subnet) OR there is a firewall blocking the connection port (54393 in this case).
------------------Resolution------------------
Go to the CMC->Server->CMS->Properties page. Here there is a section where you can specify the hostname with with each business objects server will give as the hostname (or IP address) and port (request port) that it can be contacted on. In the example below I have said that it should be contacted on the fullyqualified name and on port 6401. Again 6401 would need to be open through the firewall.
No two servers can have the same request port. As you can see in the screenshot I have specified to connect to the CMS service on 6401 using the fullyqualified hostname boeserver.mycomp.com and finally that the name server port is the default 6400.
As mentioned previously there may be also other BOE servers that similar settings are required for, depending on the actions you are performing - e.g. IDT and designer need access to the input file repository server to input/export universes, WebiRich Client also should have access to the Output File Repository Server. Client tools should also have access to the Adaptive Processing Server that is running the Client Auditing Proxy Service so that any actions are audited.
One extra thing that can cause a block on the port number, other than a regular corporate firewall is the security on the server machine itself (e.g. the Windows firewall on the server can block incoming requests if there is not an expection created.
Regards,
Graham

Install failure due to "faulty DVD" problem: only with Family Pack?

After going through a few threads on the subject of installation failure due to tbe pseudo-faulty DVD, I have the impression that many users mention that they were using a Family Pack install DVD or in one case a "drop in". The former is my case. Please post if you have had this problem with Leopard install, and whether you were using a single licence, family pack or drop in. It's just a hunch, but perhaps this problem only affects a specific set of disks.

I believe that they are holding back on sending a new DVD until they know why there were defective ones. I read somewhere that they require a new SKU so that they will actually be a separate batch.
Can you borrow a DVD from anyone to install Leopard? You certainly would be allowed to legally do that. I am surmising that Apple is overloaded with requests for a replacement DVD and really want to make sure it works. You know that old thing about "fool me once..."
Stuff happens - but with Leopard, a lot of stuff sure happened at once. They sold 2 million DVDs. If only 5% have problems, that's a lot of problems to deal with, one at a time.
In time it will sort itself out, but in the meantime the rooms are full of smoke

ETL Failure Due to Failure of a Task

Hi All,
I am getting ETL failure due to failure of a task, sporadically. Also, when i re-run the ETL, the ETL completed successfully.
I have copied the informatica session log file.
DIRECTOR> VAR_27027 Use default value [0] for user-defined workflow/worklet variable:[$$passInStatus].
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [SEBL_80] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [1] for mapping parameter:[$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint1].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint2].
DIRECTOR> TM_6014 Initializing session [VisibilityActivityParty_Full] at [Wed Aug 17 00:31:31 2011]
DIRECTOR> TM_6683 Repository Name: [Oracle_BI_DW_Base]
DIRECTOR> TM_6684 Server Name: [Oracle_BI_DW_Base_Integration_Service]
DIRECTOR> TM_6686 Folder: [SDE_SBL_80_Adaptor]
DIRECTOR> TM_6685 Workflow: [VisibilityActivityParty_Full]
DIRECTOR> TM_6101 Mapping name: VisibilityActivityParty [version 1]
DIRECTOR> TM_6827 [D:\Informatica\PowerCenter8.1.1\server\infa_shared\Storage] will be used as storage directory for session [VisibilityActivityParty_Full].
DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
DIRECTOR> TM_6703 Session [VisibilityActivityParty_Full] is run by 32-bit Integration Service [node01_sb8anaprd], version [8.1.1 SP5], build [0822].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [ASCII]
MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> TM_6151 Session Sort Order: [Binary]
MAPPING> TM_6156 Using LOW precision decimal arithmetic
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM Error Log Disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [obieeprd], user [OLAP]
MAPPING> DBG_21474 Warning: Update Strategy transform [UPDTRANS] is disabled. Set session type to [Data Driven] to enable it.
MAPPING> TM_6007 DTM initialized successfully for session [VisibilityActivityParty_Full]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Aug 17 00:31:31 2011)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Aug 17 00:31:31 2011)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 36000000 bytes and Block size is 65536 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [SB8PRD], user [SIEBEL]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8146 Writer: Target is database [obieeprd], user [OLAP], bulk mode [ON]
WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
WRITER_1_*_1> WRT_8397 Appending output data to file [D:\Informatica\PowerCenter8.1.1\server\infa_shared\BadFiles\w_act_party.bad] (initial size [717]).
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL INSERT statement:
INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL UPDATE statement:
UPDATE W_ACT_PARTY SET ETL_PROC_WID = ?, ACTIVITY_ID = ?, PARTY_ID = ? WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL DELETE statement:
DELETE FROM W_ACT_PARTY WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_ACT_PARTY]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
READER_1_1_1> RR_4029 SQ Instance [SQ_S_ACT_EMP] User specified SQL Query [SELECT
     AEMP.ROW_ID,
     AEMP.ACTIVITY_ID,
     U.PAR_ROW_ID
FROM
     V_ACT_EMP AEMP,
     S_USER U
WHERE
     AEMP.EMP_ID = U.ROW_ID]
READER_1_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
*****START LOAD SESSION*****
Load Start Time: Wed Aug 17 00:31:32 2011
Target tables:
W_ACT_PARTY
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Aug 17 00:31:32 2011)
LKPDP_1> DBG_21097 Lookup Transformation [LKP_W_ACT_PARTY]: Default sql to create lookup cache: SELECT ETL_PROC_WID,INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID FROM W_ACT_PARTY ORDER BY INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID,ETL_PROC_WID
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_W_ACT_PARTY] from [1048576] to [1050000].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
LKPDP_1:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_W_ACT_PARTY{{DSQ}}] instance name [LKP_W_ACT_PARTY{{SRC}}]
LKPDP_1:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_1:TRANSF_1_1> DBG_21682 Lookup table row count : 0
LKPDP_1:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
LKPDP_1:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
LKPDP_1:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_9W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_W_ACT_PARTY].
LKPDP_1:TRANSF_1_1> DBG_21641 LKP_W_ACT_PARTY: Index cache size = [1050000], Data cache size = [2097152]
LKPDP_1:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_W_ACT_PARTY{{DSQ}}]. Total errors [0]
TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
TRANSF_1_1_1> DBG_21524 Transform : LKP_W_ACT_PARTY
TRANSF_1_1_1> DBG_21313 Lookup table : W_ACT_PARTY
TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_W_ACT_PARTY will be the default port value
LKPDP_2> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
LKPDP_2> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
LKPDP_2> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_2:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
LKPDP_2:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_2:READER_1_1> BLKR_16007 Reader run started.
LKPDP_2:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
LKPDP_2:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_ETL_PROC_WID{{DSQ}}] instance name [LKP_ETL_PROC_WID{{SRC}}]
LKPDP_2:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_2:TRANSF_1_1> DBG_21682 Lookup table row count : 0
LKPDP_2:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
LKPDP_2:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
LKPDP_2:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_10W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_ETL_PROC_WID].
LKPDP_2:TRANSF_1_1> DBG_21641 LKP_ETL_PROC_WID: Index cache size = [1050000], Data cache size = [2097152]
LKPDP_2:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_ETL_PROC_WID{{DSQ}}]. Total errors [0]
TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
TRANSF_1_1_1> DBG_21524 Transform : LKP_ETL_PROC_WID1
TRANSF_1_1_1> DBG_21313 Lookup table : W_PARAM_G
TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_ETL_PROC_WID1 will be the default port value
WRITER_1_*_1> WRT_8167 Start loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8229 Database errors occurred:
ORA-01400: cannot insert NULL into (ETL_PROC_WID)
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8114
Row # [1] in bad file
WRITER_1_*_1> CMN_1053 : Rowdata: ( RowType=0(insert) Src Rowid=1 Targ Rowid=1
INTEGRATION_ID (INTEGRATION_ID:Char.30:): "1-B8THY"
DATASOURCE_NUM_ID (DATASOURCE_NUM_ID:Double:): "1.000000000000000"
ETL_PROC_WID (ETL_PROC_WID:Double:): "(NULL)"
TABLE_WID (TABLE_WID:Double:): "68.00000000000000"
ACTIVITY_ID (ACTIVITY_ID:Char.15:): "1-N8FBX"
PARTY_ID (PARTY_ID:Char.15:): "0-1"
WRITER_1_*_1> WRT_8164 Error loading into target [W_ACT_PARTY] : Bad rows exceeded Session Threshold [1]
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> CMN_1022 Database driver error...
CMN_1022 [
ORA-24795: Illegal ROLLBACK attempt made
Database driver error...
Function Name : Commit
Database driver error...
Function Name : Rollback]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8183 Rollback failed for the target [W_ACT_PARTY]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8080 Writer run terminated. [Error loading data and error threshold reached]
WRITER_1_*_1> WRT_8168 End loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
WRITER_1_*_1> WRT_8035 Load complete time: Wed Aug 17 00:31:32 2011
LOAD SUMMARY
============
WRT_8036 Target: W_ACT_PARTY (Instance Name: [W_ACT_PARTY])
WRT_8038 Inserted rows - Requested: 488 Applied: 0 Rejected: 1 Affected: 0
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [W_ACT_PARTY] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.656254] secs, Total Idle Time = [0.390627] secs, Busy Percentage = [40.476246].
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.562504] secs, Total Idle Time = [0.406252] secs, Busy Percentage = [27.777928].
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_ACT_PARTY] has completed. The total run time was insufficient for any meaningful statistics.
MANAGER> PETL_24005 Starting post-session tasks. : (Wed Aug 17 00:31:33 2011)
MANAGER> PETL_24029 Post-session task completed successfully. : (Wed Aug 17 00:31:33 2011)
MAPPING> TE_7216 Deleting cache files [PMLKUP12190_9W32] for transformation [LKP_W_ACT_PARTY].
MAPPING> TE_7216 Deleting cache files [PMLKUP12190_10W32] for transformation [LKP_ETL_PROC_WID].
MAPPING> TM_6018 Session [VisibilityActivityParty_Full] run completed with [0] row transformation errors.
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [SQ_S_ACT_EMP] (Instance Name: [SQ_S_ACT_EMP])
     Output Rows [50592], Affected Rows [50592], Applied Rows [50592], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_ACT_PARTY] (Instance Name: [W_ACT_PARTY])
     Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [1]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [VisibilityActivityParty_Full] completed at [Wed Aug 17 00:31:33 2011]
Can some one help me to debug the issue please ?
Thanks

Hi Nat,
Thanks a lot for your response.
I am running this ETL task from DAC. This task is a part of Daily Full load ETL. As i mentioned earlier, this task fails sporadically and failing till now. After restarting the ETL, it gets completed.
Please let me know if you have any question.
Thanks,
Neeraj

Logon failure due to an internal error-webi client tool

Hi experts,
I've installed WebI client tool 4.0, when I trying to logon this message appear: Logon failure due to an internal error,
this problem has been addressed before, but could not be resolved [http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144|http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144]
there is a way to solve this problem?
regards,
Jonathan.

In a Unix environment the version is in the file “AddorRemoveProduct.sh” located in the installation folder of BI4.x
For the updated reference table of the versions / builds and corresponding patch levels, please see KB article # 1602088
BI 4.0 RTM
14.0.0.760
Patch 04
14.0.0.904
Patch 05
14.0.0.918
Patch 06
14.0.0.940
Patch 07
14.0.0.954
Patch 08
14.0.0.970
Patch 09
14.0.0.986
Patch 10
14.0.0.996
Support Pack 1
14.0.1.287
Patch 1.1
14.0.1.313
Patch 1.2
14.0.1.330
Patch 1.3
14.0.1.342
Patch 1.4
14.0.1.360
Patch 1.5
14.0.1.375
Patch 1.6
14.0.1.397
Support Pack 2
14.0.2.364
Patch 2.1
14.0.2.388
Patch 2.2
14.0.2.397
Patch 2.3
14.0.2.416
Patch 2.4
14.0.2.439
Patch 2.5
14.0.2.455
Patch 2.6
14.0.2.481
Patch 2.7
14.0.2.508
Patch 2.8
14.0.2.532
Patch 2.9
14.0.2.556
Patch 2.10
14.0.2.565
Patch 2.11
14.0.2.594
Patch 2.12
14.0.2.619
Patch 2.13
14.0.2.641
Patch 2.14
14.0.2.657
Patch 2.15
14.0.2.682
Patch 2.16
14.0.2.703
Feature Pack 3
14.0.3.613
Patch 3.1
14.0.3.630
Patch 3.2
14.0.3.657
Patch 3.3
14.0.3.678
Patch 3.4
14.0.3.691
Please note that at today FP03 is in RampUp

Exception Reporting failure due to short dump UNCAUGHT_EXCEPTION

Hi everyone,
Exception Reporting called u201CPO Price Deviationu201D failure due to short dump UNCAUGHT_EXCEPTION.
Need your reply on this urgently.
Thank you,
Prasad

Hi Andrew Zhou,
Actually the Exception reporting step failed because there was no applicable data for the selection criteria mentioned in the BEx report. And the data was stuck in the source system. We got it solved my contacting the R/3 cosultant.
I am giving you points for the response. And I would like to know one thing about RSRT if I select "use aggregates" option for a query it is showing aggregates while debuging even though there are no aggregates created on the Cube.
Thank you

Transport failure in QAS system after support pack stack 9 upgrade

We have a DEV->QAS>PRD ECC system landscape. Recently we upgraded our DEV, QAS and PRD system to support pack stack 9 (with Kernel level 137). After the upgrade, we got transport failure in QAS where it shows pink colored down arrow which shows unable to open import queue when I click on it under stms import overview. If I put back the old kernel (Level 69), transport works just fine. DEV is the TP domain controller. When I run the RTPTEST in QAS, it show sthe follwing info:
RFC Destination
Destination CALLTP_WindowsNT
tp Path E:\usr\sap\QAS\DVEBMGS02\exe\tp.EXE
tp Executable Size: 10.352.432 bytes
RFC Ping Error when opening an RFC connection
tp Call
RFC Link Error when opening an RFC connection
tp Version
DB Connect
Offline Call Error when opening an RFC connection
I will greately appreciate any input to resolve this issue.
Thanks

You need to upgrade two component of your kernel tp and R3trans
Also perform an additonal test with new kernel
cd /usr/sap/trans/bin
tp connect <SID> pf=TP_DOMAIN_<SID_DC>.PFL
If you have issue to connect it means there is some issue with tp tool and/or connectivity
Cheers !
Manish

Could not convert the data value due to reasons other than sign mismatch or overflow. ADSI Provider

I'm trying to run the following query against Active Directory using the ADSI Provider using SSMS 2012 SP1:
SELECT
TOP901
*FROMOpenQuery
ADSI
'SELECT description
FROM ''LDAP://OU=MMICorporate,DC=mmis,DC=mi,DC=com''
WHERE objectClass = ''User''
and objectcategory = ''Person''
and ''userAccountControl:1.2.840.113556.1.4.803:''<>2
)AStblADSI
Msg 7346, Level 16, State 2, Line 2
Cannot get the data of the row from the OLE DB provider "ADsDSOObject" for linked server "ADSI". Could not convert the data value due to reasons other than sign mismatch or overflow.
I only have this issue querying the Description Field.
I also found a hotfix KB: 887474 for this but it is for Windows 2003. SQL Server OS I have is Server 2008 R2. Is there a fix for 2008 R2?
Thanks

Thanks for the quick response.
I checked out the link and I can only convert to Ul8 and when I try I get the same error:
SELECT
TOP901
*FROMOpenQuery
ADSI
'SELECT name, convert(UI8, description)
FROM ''LDAP://OU=MMICorporate,DC=mmis,DC=mi,DC=com''
WHERE objectClass = ''User''
and objectcategory = ''Person''
and ''userAccountControl:1.2.840.113556.1.4.803:''<>2
)AStblADSI
Am I missing something?
Thanks

Write Failure due to packet loss

Hi All,
Is it possible to occur a cache put failure due to packet loss. The below JMX report log (network-health-detail.txt) shows that TX success as 0.9999 for NodeId(8 PROXY node) and RxSuccess shows 0.9999 (node id 9 which is a STORAGE) exactly the same time.
At the same time I have inserted a cache item which went missing in the cache.
Is it possible to correlate the cache loss with the below data.
Please correct me if my understanding is work. Really looking forward for some expert look at this.
Regards
Srinivas
Batch Counter Report Time RefreshTime Node Id Tx Success Rx Success PacketsSent Current Packets Sent PacketsResent Current Packet Resent PacketsRepeated Current Repeated PacketsReceived Current Packets Received
24962 Thu May 05 15:54:37 BST 2011 Thu May 05 15:54:37 BST 2011 8 0.9999806938625789 1.0 116249593 51797.0 20 1.0 179 0.0 479093147 107230.0
24962 Thu May 05 15:54:37 BST 2011 Thu May 05 15:54:37 BST 2011 9 1.0 0.9999898626387551 110148867 169211.0 118 0.0 61.0 55759817 98645.0

It is more likely that you had other issues that caused your data to go "missing". Lost packets would be resent anyway so should get there eventually. The success rates of 0.9999 would be fine, you would be lucky to get a success rate of 1.0 all the time unless your cluster was not doing much.
When you say the data goes "missing" what do you mean. Presumably you do a put to get data into the cache, how to you try to get it back - a get or a query using a Filter.
What classes are you using for the keys - this can be important and can affect whether your cache works as you expect it to.
JK

Software updates (4.1.B.0.431) failure due to WIFI (internet) Disconnection

Software updates failure due to WIFI (internet) Disconnection
After connecting the Phone to PC, tried to update software (4.1.B.0.431) using “Sony Pc companion” software,
during software update process WiFi stopped working and internet connection is lost (due to power went) ,
when internet connection established again ,tried to update software again
error popup appeared please refer images error1 .bmp and error2.bmp
Set up:
Phone: Sony Ericssion Xperi Mini Pro (SK 17)
PC OS: Windows 7 (64 bit)
Internet connectivity: WiFi with speed of 512KBPS

try SUS
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

[svn:osmf:] 13558: Fixing element removal failure due to ParallelDisplayObject trait not being able to resolve media element from view trait .

Revision: 13558
Revision: 13558
Author:   [email protected]
Date:     2010-01-17 10:18:44 -0800 (Sun, 17 Jan 2010)
Log Message:
Fixing element removal failure due to ParallelDisplayObject trait not being able to resolve media element from view trait. Extended TraitAggregatorEvent to include to media element so resolving is no longer required.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/composition/ParallelDisplayObjectTrait.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregationHelper.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregator.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregatorEvent.as

0CHRT_ACCTS as compounding character for 0GLACCEXT

Hi experts,
I want to define 0GLACCEXT as a navigational attribute of 0GL_ACCOUNT.
Because I wanna use its hierarchy in reports.
0GL_ACCOUNT has 0CHRT_ACCTS as compounded characteristic. Example : Chrt Acct= INT, GL Account: 110000
Should I also define 0CHRT_ACCTS as compounding character for 0GLACCEXT.
If yes, should I fill it during extraction from 0gl_account_text ?
Or
Will it be filled already during extraction from 0gl_account_hier ?
Thnx.

Hi,
No you dont need to define 0GLACCEXT as a compounding of 0CHRT_ACCTS .
Regards,
Amol

Character check total as word

Hi all,
1. Anyone know how to expand character Check total as word (i.e. Ten Thousand Eight Hundred Dollar only) generating by system in Checks for payment program? If there have any setting or coding need to adjust?
2. How about maximum character is allow? I'm using SAP B1 2005 SP01 PL 45 and database Ms. SQL Server 2005. If there need to amend in database, how to adjust it?
Thanks in advance.
uddin
Edited by: Muhd Mahyuddin Zakaria on Feb 3, 2009 12:55 PM

Hi,
I don't know if any standard method is available for that, but you can use following code:
    Public Function AmtToWords(ByVal Amount As Single) As String
        Dim Paise, Rupees As Integer
        Dim Words As String
        Dim N1, N2 As Integer
        Rupees = Amount
        Select Case Rupees
            Case Is <= 9
                Words = Digit(Rupees)
            Case Is < 20
                Words = EleToNin(Rupees)
            Case Is < 100
                N2 = Rupees Mod 10
                N1 = (Rupees - N2) / 10
                Words = Ten(N1) & " " & IIf(N2 = 0, "", Digit(N2))
            Case Is < 1000
                N2 = Rupees Mod 100
                N1 = (Rupees - N2) / 100
                Words = Digit(N1) & " Hundred " & AmtToWords(N2)
            Case Is < 100000
                N2 = Rupees Mod 1000
                N1 = (Rupees - N2) / 1000
                Words = AmtToWords(N1) & " Thousand " & AmtToWords(N2)
            Case Is < 10000000
                N2 = Rupees Mod 100000
                N1 = (Rupees - N2) / 100000
                Words = AmtToWords(N1) & " Lakhs " & AmtToWords(N2)
        End Select
        Return Words
    End Function
    Public Function Digit(ByVal Number As Integer) As String
        Select Case Number
            Case 0
                Return ""
            Case 1
                Return "One"
            Case 2
                Return "Two"
            Case 3
                Return "Three"
            Case 4
                Return "Four"
            Case 5
                Return "Five"
            Case 6
                Return "Six"
            Case 7
                Return "Seven"
            Case 8
                Return "Eight"
            Case 9
                Return "Nine"
        End Select
    End Function
    Public Function Ten(ByVal Number As Integer) As String
        Select Case Number
            Case 1
                Return "Ten"
            Case 2
                Return "Twenty"
            Case 3
                Return "Thirty"
            Case 4
                Return "Fourty"
            Case 5
                Return "Fifty"
            Case 6
                Return "Sixty"
            Case 7
                Return "Seventy"
            Case 8
                Return "Eighty"
            Case 9
                Return "Ninety"
        End Select
    End Function
    Public Function EleToNin(ByVal Number As Integer) As String
        Select Case Number
            Case 10
                Return "Ten"
            Case 11
                Return "Eleven"
            Case 12
                Return "Twelve"
            Case 13
                Return "Thirteen"
            Case 14
                Return "Fourteen"
            Case 15
                Return "Fifteen"
            Case 16
                Return "Sixteen"
            Case 17
                Return "Seventeen"
            Case 18
                Return "Eighteen"
            Case 19
                Return "Nineteen"
        End Select
    End Function

Backup failure due to Character set problem

Hi,
I am manually running a COLD backup script in Windows NT environment and all the logs has been captured below:
Recovery Manager: Release 8.1.6.0.0 - Production
RMAN-06005: connected to target database: db1 (DBID=754030292)
RMAN-06009: using target database controlfile instead of recovery catalog
RMAN> shutdown immediate;
2> startup mount;
3> RUN {
4> ALLOCATE CHANNEL disk1 TYPE disk;
5> BACKUP DATABASE TAG 'db1_db_full' FORMAT 'e:\backup\db1\db1_backup';
6> copy current controlfile to 'e:\backup\db1\Control_db1.ctl';
7> }
8>
RMAN-06405: database closed
RMAN-06404: database dismounted
RMAN-06402: Oracle instance shut down
RMAN-06193: connected to target database (not started)
RMAN-06196: Oracle instance started
RMAN-06199: database mounted
Total System Global Area 934143244 bytes
Fixed Size 70924 bytes
Variable Size 260554752 bytes
Database Buffers 673439744 bytes
Redo Buffers 77824 bytes
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: disk1
RMAN-08500: channel disk1: sid=13 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: backup
RMAN-06003: ORACLE error from target database: ORA-06550: line 1, column 166:
PLS-00553: character set name is not recognized
ORA-06550: line 0, column 0:
PL/SQL: Compilation unit analysis terminated
RMAN-06031: could not translate database keyword
Recovery Manager complete.
As the above log shown, I cannot do any backup command in the RUN bracket and it complains that the character set is not recognized.
This set of error happens when I have create six other Oracle databases in my NT box. Before that, I can manually run the backup with no problem and a backupset has been generated.
If you have come across this problem and have solutions of it. That will be great.
Thanks !!
null

kk001 wrote:
Hi ,
The export Backup failing due to character set problem
. . exporting table ravidlx
EXP-00008: ORACLE error 6552 encountered
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-553: character set name is not recognized
P
Please suggest how to set character set
I don't know what you have.
I don't know what you do.
I don't know what you see.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.
do as below so we can know complete Oracle version & OS name.
Post via COPY & PASTE complete results of
SELECT * from v$version;

IMac Power supply PSU failure due to UPS type

I am posting this to aid anyone else who has suffered a similar issue as it took me some time to rectify and it was difficult to find evidence of proof.
Preamble:
My late 2012 27" iMac began powereing off, sometimes after a few days sometimes after 20 minutes. It gradually got worse until it would not power on at all.
I had tried all possible fixes I could including - reset SMC and NVRAM, reinstalling Mavericks, running from an external HDD with a cloned OS, running with a fresh Mavericks install on a USB stick.
Also ran Apple Hardware tests and used Micromat Techtool 7 with no problems apparent.
Also tried running when moved from my desk and plugged into a different socket in the house (this point is especially relevant).
Repair attempts:
Apple (via Amsys) changed the logic board. This worked for a day then the fault reoccurred. Apple (Apple store this time, Amsys scratched the aluminium housing previously so I avoided them) then changed the PSU.
This fixed the fault and the iMac ran with no problem (apart from audio missing - another discussion perhaps!), BUT when I moved the iMac back to its original position on my desk (having been plugged in the aforementioned other socket) it would not power on again. I then realised it was the UPS and iMac were not playing nicely. If I plugged the iMac into the UPS when the UPS was already powered on, the iMac would work until the next random power down. I have used the UPS with everything else including the iMac for over a year so didn't suspect it. However, I do have the occasional brownout (power dip) and power cut so it has been utilised for the iMac a handful of times without issue.
Solution:
I have now researched and concluded the iMac PSU (at least the Energy Star 5.0 onwards compliant ones, not sure about older iMacs) need a Pure Sine Wave UPS otherwise the PSU may be damaged as mine was. It may not happen until the UPS is called upon either. In fact any active PFC PSU could be affected. I could not find this out from Apple or APC (my UPS manufacturer), only with some reasearch and my own knowledge of electrics. It seems that not all iMacs are as sensitive or for other reasons this fault will not occur with a similar set-up to mine, but I am now confident that this was the cause. Please note I do not yet have my own Pure Sine Wave UPS and I am now running without one for the time being until I buy a Cyberpower CP1300EPFCLCD or similar.
Some of my references are below:-
http://www.tomshardware.com/reviews/apc-smt1500-cyberpower-cp1500pfclcd-tripp-li te-smart1500slt,2785.html
http://www.primegrid.com/forum_thread.php?id=5553
http://forums.macresource.com/read.php?1,1196487,1197254

Welcome, Cubber;
yes, there are some people complaining here about power supplies -
I'd contact Apple and tell them your problem. Being hit twice by the same failure is not nice. Usually they cooperate - have a look at just this post her:
http://discussions.apple.com/thread.jspa?threadID=673758&tstart=0
Please, keep us informed how it ends.
Thomas

Transport failure due to reason Compounded character produced totall lenght

Similar Messages

Maybe you are looking for