Transport for CATT script
Hi all,
I have an already existing CATT script, in which I need to make changes .
I can't find the Version management page in the script, so is it the usual way that the changes are included in the TR or is there any other way to make the changes ?
Also, how to check the already existing Transports ( Versions ) for this script ?
Thanks,
~
Hi..
You can see the Versions for the script
just go to SE71 and enter the script name
then you click on Utilities -
> Versions
there you can find the versions that what gets generated
If it helps reward with points
Regards Rk
Similar Messages
-
Ran CATT Script for the role assignment to users
Hi All,
I have ran ECATT script for doing role assignment in QAS and completed successfully. I did this through CUA. What is the next step after running catt script? Do I need to doing anything with PFUD in each child system? Because I checked in the child systems many derived single roles are not generated in QAS.(RED). Is it because of running catt script or it might have came like that only from development? Please advise..
Regards,
Masood>
Salman123 wrote:
> Please let me know how should I proceed from here
Hi,
I have told you why the error message is there. What do you not understand about the resolution? Your parent roles are out of sync with the child roles so you need to re-sync them. An example of how do do this is to "adjust derived" from the master role. Only when you have done this will your roles be in sync again. -
Edit catt script for changes in in web appl server higher than 6.4 release
Hello Gurus,
Will you help me in editing the CATT script for changes in Web application server release higher than 6.4 release, when I look for edit mode it was showing the following message. will anyone suggest me is there any way to make changes.
While I was choosing change mode it was displaying the above message ( Message No:TT005)
Full points for the answerIt seems there there is no problem with my FireFox 7.0.1 on my Mac OSX 10.7.2. So, maybe you can solve the problem by updating your OS. The only minor problem here is that Firefox doesn't display in the Tibetan fonts that you choose, it always display in Kailas font for Tibetan.
-
Issue with Creating CATT Script for Generating Derived Roles
Hi Experts,
I am desperately trying to find the solution on how I create a CATT Script to generate derived roles from few 100 master roles.
I posted a thread on Security (Can I do a 'mass generation' of dervied roles?) .. however, since it turns out to be a SCAT issue, I thought I'll ask someone from this forum too.
Extract from the other thread is as follows :
"I cannot get the script to automate the generation of derived roles.
when Entering parameters for a test case, I can only see the Initial PFCG Screen. Display/Change Authorization screen doesn't seem to get recorded / logged in the test screen.
I.e : All screens with program SAPLPRGN_TREE is recorded, however all screens with program SAPMSSY0 is not.
I hope it makes sense.. Any suggestions on how I can automate the generation of derived roles tasks?
Thanks.
DineishHi,
I have the same problem just now.
Have you found some solutions about it ?
thx
Luigi -
Purpose of RSTXTRAN program for SAP-Script ?? ??
Purpose of RSTXTRAN program for SAP-Script ?? ??
when it is required to run that program ?Hi sarit,
Purpose of RSTXTRAN program for SAP-Script Transfer of SAP script Texts to a Correction.
The report RSTXTRAN allows a set of SAP script texts (or the text key) to be transferred to a correction or repair of the transport system. The name of the correction/repair can either be transferred as a report parameter, or the correction/repair can be selected later in a selection window. The text key can be qualified generically using the asterisk character (*).
When the report has been executed, the list of selected texts appears. Individual texts can be deselected in this list. When the function "Continue" is executed, the final list of texts which are to be transferred is displayed. The transfer of texts to the correction/repair can now be activated by the appropriate function, and must be confirmed in a dialog box.The requirements for this as follows.
There is a correction/repair in which the selected text keys can be entered, if it is not being processed. The report can only insert text keys in corrections or repairs, not however in transport requests. However, the objects contained in a correction can be transferred to a transport request with the correction and transport system transaction.
It should also be noted that the report selects texts in the current client, but that the transport system generally exports texts from client 000.
When the report has been executed,the output can be a list of the selected texts. Information about whether transfer to the correction/repair was possible is displayed for each text key.
Reasons for failed transfer include
o the correction/repair is currently being processed
o the correction/repair does not exist
For Example
All German standard texts with the ID ST, whose names begin with SAPSCRIPT, are to be entered in the correction B20K009999. The report parameters are then assigned values as follows:
o Correction: B20K009999
o Text object: TEXT
o Text name: SAPSCRIPT*
Thanks,
Usha -
Urgent - How to Run a FM using CATT script tool,
Hi All,
How to Run a FM using CATT script tool,
Thanks in advance,
KSRchoose type as "Function module test" (if you are in release less than 6.4 abap) after entering into t.code SCAT.
Pl. refer to this documentation for creating function module test cases
<a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf">http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf</a>
reward if it helps
Krishna -
Role Tab(section) is not getting captured through CATT script on PI/XI.
Role Tab(section) is not getting captured through CATT script on PI/XI system
I am trying to create CATT script for user creation and role assignment on PI/XI. Every screen except ROLE and GROUPS is getting captured.Hi Plaban,
I have had the same problem in the past but I didn't investigate too far.
What I prefer to do is have 2 scripts.
1. User Creation using SU01
2. Role assignment using SU10 -
Usage of CATT scripts in Sap FI/CO module
Hello guru's
Please explain the usage of CATT scripts in FI/CO module .
and is there any specifications for using this CATT script in month end FI/Co activities.
please explain me in detail
Thanks & Regards
Chandra.Dear Chandra,
CATT is a SAP tool for testing certain procedures. It could act like a macro-recorder in Excel. That is, you record your actions for certain transaction via CATT and then replay it for the data that you store in an ASCII file. Some people use CATT for uploading the initial master data as well (e.g. cost centres, internal orders, etc.) instead of other SAP tools (LSMW, IDOC).
Bottom line, there is no activity of using CATT in FI-CO; nor in the routine maintenance, neither in end-period procedures. Someone has mislead you on this point. However, if you'd like to use CATT, you can look at the following link:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/48/c521a8f6ec11d2bdde080009b4534c/frameset.htm
Regards,
Eli -
Problems With Transporting Interaction Center Scripts
I have problem when I select a Script and click on Transport button in the Web UI for the interaction center, IC_Manager Role. After clicking on the transport button I need to check in the back end (transaction code SE01), if a customizing request has been created for that script I selected.
So the problem is how do we find out if there is customizin request for that script or not? Is there a Pop Up window which comes after clicking on Transport button which would give me a customizin request number, which could be later used to find the request in backend?Hi,
Try checking this in the BSP Application CRM_IC_ISE.
If you open the script on the third tab (Script Transport) you can see the transport details.
Hope this helps.
Rgds,
Rajiv -
HI Thanks for every one who gave me the reponse to my previous thread. Now i can run both CATT and ECATT scripts.
But can any one clearly tell me the differences or advantages of ECATT scripts over CATT Scripts.Hi Sreekanth,
I obsereved the follwing differences btw CATT and eCATT
1. By using CATT you can test transaction in R/3 system. Where as by using eCATT you can test SAPGUI for Windows and SAP GUI for Java (As it works with SAP Web Application Server 6.20)
2. In eCATT you can write any ABAP login you want, and you can also call RFC,BAPI in the script itself.
3. By using eCATT you can test the web interfaces as well
4. Using eCATT you can have the functionality of other testing tools in the market. like QTP.
5. eCATT provides an interface for external tools. This allows companies to perform automated tests from an SAP system in a complete IT solution landscape across system boundaries. These new options enable complete automation of solution landscapes under standard Windows and Web-based user interfaces- resulting in low-cost operation of an IT Solution.
i think we can consider the above all points as advanteages over CATT tool.
hope this helps. Rewars if it help.
-Manjula P -
Transport.of SAP script form , printer def and device type is not enaugh
I transported the SAP script form , printer definition and device types of a thermal printer.
On original system the printout is ok but on target system not. What should I do?Thank you for your fast answer
As the matther of fact I am technical person. I think Output type belongs to application. However the difference is visible in se71 ->Utilities->Printing test -> output device ->print preview.
As I wrote I transpored corresponding. SAP script form , printer def and device type -
Hi !
Could you please help me out about CATT Scripts. I guess this will be a job of abaper, but in bpp's it asking to run the CATT script.
Pls help me out.
Regards,
Ben Hur
Moderator: Please, search help.sap.com for CATT and try posting on the relevant forum next timeSee shoblock's answer
call sql script from unix
masterfile.sql:
@file1 &1
@file2 &2
@file3 &3
@file4 &4
then just call the master script:
sqlplus userid/password @masterfile <p1> <p2> <p3> <p4> -
Can u plz anyone explain me the procedure for modifying script
can u plz anyone explain me the procedure for modifying script.
i.e no need of coding
just i want procedure.Hi sriharitha,
IN SE71, use the environment function 'copy from client' and make a copy of the existing script to the Z namespace. The make the modifications in SE71 as required. In cistomizing, make the new form known. Actiovate and transport.
Regards,
Clemens -
E-catt Script error while trying to Modify the script
Hi All ,
I get the error while trying to modify the E-catt Script "Entry cannot be changed In User View Object <Objext Name > ". Please let me know if Some one confronted with same error or that can be avoided.
Waiting for your reply
BadariHi Baez,
You have to create a record with country record id in BankDetails table or get record id if country record id is already existed in BankDetails table and use this record id to create qualified link .
1. get Country record id
2. search in Bankdetails table with Country Record id,
3 . if exist in Bank details table, get record id in Bank details table and pass it to createQualifiedLink()method
or
3. if Country record does not exist in BankDetails table, then create new record in bankdetails table with Country record id, pass record id of new record to createQualifiedLink()method
I hope this helps you......
Cheers,
Veeru -
Urgent : Copy CATT Script / Testcases across server
Hi Experts,
I want to Copy CATT Script / Testcases form one server to another(servers having same versions)
and also I want to Copy CATT Script / Testcases form one server to another(servers having different versions)
please help me.
Regards,hi,
I think that CATT scripts/testcases are repository objects thus these can be transported to the required servers using the standard transport request by using the change and transport system.
Regards.
Sourabh
Maybe you are looking for
-
The cable to the external hard drive that houses my iphoto library was accidentally disconnected while the library was open and up on the screen. We plugged it back in, but now the screen is frozen. Has anyone experienced this before? If I force qu
-
How do you turn your music off on your ipod touch?
how do you turn your music off on your ipod touch?
-
Satellite C655-S9521D Touch Pad Left Click not Working !
My Laptop (Satellite C655-S9521D) left click in touch pad not working from yesterday. But i can move the cursor using touch pad. I think it just happened after disconnecting the wired mouse. Looking for great support soon. Have a good day!
-
Video unsupported format problem after installing OS 6
I had two videos saved on my Sprint Curve 9330 that played with OS 5. After installing OS 6, I now get an error message that states, "The video portion of the media being played uses an unsupported format." The sound from the video plays, but, the
-
How do i sync iphone with computer for first time?
Need help to sync my iphone4S with my Mac