Transport for local workbench request

Hi guys,
i have a package which I modified and want to save to a transport, but a dialog is prompted for local workbench request. Actually I am wondering why this package is local object. Because in local object I didn't see this object.
Can somebody give me some hint?
Thanks in advance
Regards,
Liying

A local object is something which non-transportable. You should change the Object directory entry of the objects to a transportable package so that the system will automatically prompt you for tr. request number.
regards,
Ravi
Note - Please mark all the helpful answers

Similar Messages

New Requests created are in 'Local Workbench Request' in R3 Development

Hello ,
I am going to transport data sources from R3 Dev to R3 Quality.
I have successfully transported the package (which is created in SE80 ) and Application componenet hierarchy and all active version data source RSA6 to R3 Quality .
I have also checked that the package , application transport hierarchy and data sources in R3 Quality.
Now when I tried to create new requests for LBWE data sources ( maintain extract structure , generate data source) , I am getting a message Create Customizing Request , So I created Customizing Request and then I am getting message to create Local Workbench request. If I create local workbench request then it can not be imported to R3 Quality.
Client R3 is open SCC4 settings are 'Automatic Recording of Changes ' and 'Changes to repository and cross client customizing are allowed'.
I am not getting why the system is not asking me to created 'Workbench Request'.
Thanks and Regards ,
Amol Kulkarni

Hello Viren ,
Local Transport Request are not transportable even if we release them.
I have resolved the issue in the below way ,
I went to SE21 and entered the package name as 'YBW' and then clicked on change .
Then Click on properties tab and then select Transport layer as SAP and save.
Go to SE80 and select package and in dictonary Objects drill down view ...right click on any selected view name ...go to other function and click on Write Transport Entry...mention request from Own Request tab which was earlier as Local Workbench Request.
Then go to SE10 and double click on request and go to properties tab ...there select Target Group as
R3 Quality Server name and save it.
Transport the package to R3 Quality.
Henceforth whichever request u create will be of type 'Workbench Request'.
go to SE10 and cross check that your request is now Workbench Request,
Regards ,
Amol K.

Question to local workbench request

Hi,
I have question to local workbench request. If this kind of request is released, is it stored also in the local transport folder (/usr/sap/trans...) in the file system? Or where I can find it?
Thanks for your answers.

Hello Andreas,
A local workbench TR or for that matter any local Transport Request is one which has no target group/target system assigned to it and hence even after releasing it the changes stored in it don't get moved to other systems.
A local TR when released does not get stored in /usr/sap/trans folder as data and co-files for local TRs don't get created.
A released local TR can be viewed in SE01 transaction in SAP.
Please let us know what is your exact requirement with local workbench TR? May be we will be able to help you out with that.
PS award points if you found this answer useful.
Regards.
Ruchit.

How to transfer local workbench request to production server

Hi,
All my workbench requests are saved under local change request node instead of being in the production system node. How to release and transport these requests to the production server.
Kindly help.
Regards,
Sriram

Hi Sriram,
In SE01 check whether u have given value for target system or not.
Target system is ur production system .Check whether u have specified it in SE01 for ur transport request.
If u have not specified target system for ur Transport request it will be shown in Local Workbench request
Regards,
lakshman.
Edited by: Lakshman N on Aug 4, 2009 9:31 AM

List all Local Workbench Requests

Hi all,
In SE09 there are more than 20 thousand requests. In these there are lot of local workbench requests available. Some local workbench requests have different packages.
My requirement is to list out all the local workbench requests from different packages. How it is possible?
Regards,
Ranjith C.

Hi ranjith,
Go to table TADIR. You give the package name or development class name in the field DEVCLASS. You will get all the requests for this package in the field KORRNUM.
Hope this will help you.
Regards,
Sanath.

Default transport under Local change request

Dear Friends,
I am trying to transport objects from dev to QAS. i catch hold of the object, create transport request. By Default they are getting assigned to Local Change Requests instead of being assigned to Modifiable requests under target system. (in SE09)
how can i change the default from local change request to Quality.
Regards
Paddy

Thanks Edwin,
this is what i am doing now. But, by default i want it to be set in Quality--> Modifiable.
Everytime going to settings and changing it does not seem to be a permanent solution.
Request your earliest response.
Rgds.

Search Help for Customizing Workbench request

Hi Colleagues,
I have two elements in the WD UI viz: Workbench Transport Request and Customizing transport Request.
I have Dictionary Search Help set to SEEF_MIG_TRKORR for Workbench TR but i cannot find a search help for Customizing TR.
Also there is no search filter on the SEEF_MIG_TRKORR search help. Thus i cannot use this for both the elements.
Could you please help to determine the search help for customizing request.
Thanks and Regards,
Piyush

Please try '/SAPSLL/TRKORR_W' OR 'COMSH_DIFF_KEY_GEN_REQ'
Edited by: Ramalingam Muthian on Mar 5, 2010 10:47 AM

Customizing request & Workbench request

Dear all,
What is the differance between Customizing Request & workbench request?

Hi,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Workbench requests record changes made to ABAP Workbench objects.
There are local and transportable Workbench requests. (Local Workbench requests have the target system <space>.)
The package of the object and the transport route settings in the Transport Management System determine whether changes are recorded in a local or a transportable Workbench request.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
Changes to Customizing settings are recorded in Customizing requests.
When you release the requests, the current status of the recorded settings is exported, and can then be imported into the consolidation system and, if necessary, into subsequent delivery systems.
The client settings determine whether
o changes to the Customizing settings are possible
o the changes are recorded
When you create Customizing requests, the transport target is automatically assigned the standard transport layer by the R/3 System.
Regards,
Satish

Local change requests

Dear All,
One of transport request has ersides at
302-> Workbench -> Local change requests . --> When I release the Transport
request its didnot create a data and cofiles under /usr/sap/tans folder.
At the same time Transport request is resides at
302-> Workbench -> DMY Dummy->Released the request -> created the data and cofiles.
1. What is the Difference between Local change requests and DMY transport requests. ?
2. How to get the data and cofiles of transport request resides under Local change requests. is their any way to copy and create a new transport. If yes. How to copy and create a new transport request in sap R3 4.6C.?
Thanks
Malai

Dear Sharath,
Thank you for the detaild information.
I have mistakenly already released local transport request, Now status shows that released. And screen is not editable.
Hence I tried your second options.
Created the copy of "Local Change request" which I already released,
XXXK900206       XXXPADM       For Pmg Modification 20100531 Modification
     XXXPK900207   XXXPADM       Repair (Changed from Unclassified)
         Object list of request
         Comment: Object list included
         Report source
First I released the reference Transport Request. Its released fine, then When I release the transport request it prompt a small window
Object Checks
Not all objects in the request could be locked
Do you want to release them anyway?
Yes or Error or Cancel is available.
I clicked the error button. found that below message on the screen.
Object LIMU REPS ZFFF0020:
Only edit objects from development class ZPF001 in local requests
Object LIMU REPS ZFFF0320:
nly edit objects from development class ZPF001 in local requests
Object LIMU REPS ZFFF0380:
_When I click Icon which resides above error , it prompt me the below window_
Only edit objects from development class ZPN001 in local requests
Message no. TK 332
Diagnosis
Objects in development class ZPN001 cannot be edited in transportable Workbench requests in the current system FNP. The transport routes are configured such that objects from development class ZPN001 can only be edited in local Workbench requests.
System Response
The function terminates.
Procedure
You have the following options:
If you want to transport objects in development class ZPN001 into the target TS1 once only, without changing the configuration of the transport routes, then create a transport of copies in the extended view of the Transport Organizer (Transaction SE01). Go to the request overview and choose Request/task -> Object list -> Include objects to include your objects in this transport of copies.
If you would like objects in development class ZPN001 to be transported generally into the target system TS1, contact your transport administrator. In this case, the configuration of the transport routes must be corrected in the Transport Management System (TMS). For details, see the documentation on the Transport Management System.
PLease let me know how to procedd?.
Thanks
Malai

Workbench request & Customizing Request

Hi ABAP Experts,
What is Work bench request and customizing request ? what is the differences ?
Thanks and Regards,
Vijaya

HI,
Customizing Request:
Changes to Customizing settings are recorded in Customizing requests.
When you release the requests, the current status of the recorded settings is exported, and can then be imported into the consolidation system and, if necessary, into subsequent delivery systems.
The client settings determine whether
- changes to the Customizing settings are possible
- the changes are recorded
When you create Customizing requests, the transport target is automatically assigned the standard transport layer by the SAP System.
Workbench Request:
Workbench requests record changes made to ABAP Workbench objects.
There are local and transportable Workbench requests. (Local Workbench requests have the target system <space>.)
The package of the object and the transport route settings in the Transport Management System determine whether changes are recorded in a local or a transportable Workbench request.
Changes to Customizing settings are recorded in Customizing requests.
Workbench requests record changes made to ABAP Workbench objects.
It shows the 2LIS_11_VAITM is already in a particular request......you can do changes and in it if you delete the request or it might be locked in the request with someone's other ids....you can verify with them.....
You can see good details on this thread:
Re: customising and workbench request
Hope this helps...
PLS:AWARD POINTS IF USEFUL
SRI
Hope this helps

STRANGE!!! Script in a Workbench Request.

Hi All,
Generally i am told:
1. All Client Dependent objects (Table Entries) ask for customizing request.
2. All Client Independent objects (Cross-Client table entries) ask for Workbench Request.
The SAP Script which is a client dependent object, but when i was saving my script it asked for a Workbench Request.
Could any one please let me know why this happens.
Thanks & Regards,
Goutham.

You have mentioned the answer inthe question itself. Customising requests are for Client dependent <b>Table Entries</b>. Since Script is not a table entry but a R/3 object it will be saved in the Workbench Request.
Regards,
Anish Thomas

Prompt for transportable Workbench request

Hi experts,
I want to create a web service, and let my asp.net program call it.
I input se37 in ECD, and input zzz_yyyy_xxxx as function module, then click "create" button.
In the next step, I need input "Function group", but I have not , so I need crate one.
In the "Create Function Group" dialog, I input "Function group" and "short texst", and click "save" button. It takes me to "Create Object Directory Entry", I input "Package" ,then press "Save"button again.
Now it takes me to "Prompt for transportable Workbench request" dialog. Now I need input "Request" and "short description".
I'm confused. What do I input as "Request"?
Thanks.

I am guessing you are quite new to this? It is asking you to create a transport package which can be sent to quality or production systems later on. If you do not want to do this you can click local object and it stays in development server. Otherwise you click the page icon and then type a description of the work/program you are creating. Save it and it will generate a transport package for you.

What is "prompt for local work bench request"?

Hi..I am new to SAP BI.Just now I started Practicals on BI.I am creating Info Area,after giving the technical name and long description for the info area,it is showing another window as "prompt for local work bench request"and asking "workbench request".what does it mean?why it is not creating the info area??
Can anyone suggest me?
Thanks & Regards.

Hi,
Seems like your working on ideas version.
that prompt was pop up due to the standard transport procedure.
When we work on real systems, all newly created or changed objects need to capture into transport and need to move across the landscape(Dev-->quality-->prod).
You can turn off standard transport procedure.
log into BW, RSA1-->transport connection,
From Menu Edit--->transport--> switch off standard.
Thanks

Released the Transport Request which is in Local Change Request

Hi,
Actually without knowing I have released transport requests which are under Local Change Request.Due to this they are not available for importing in Quality system.My Package is also there in one of those Requests.Now please guide me how to recover these requests.
Regards
Karthik

Hello Karthik
The easiest way should be to copy the object list of your local request to a new (transportable) workbench request.
However, the system might tell you that your objects can only be put into a local request.
In this case you need to find out why your objects are not (yet) transportable.
Usually there are two reasons for local request:
1.) The request does not have a target system -> check the request header and enter the correct target system (if possible)
2.) Your package has an inappropriate transport layer assigned -> change the transport layer
Regards
Uwe

Find workbench request for existing report

Hi
Someone created an Report for me in order to develop some new functionalities.i have to transport it now in the test system but i do not know how i can find the workbench request for it or how i can save it in another workbench request.
thanks

Hi Seba ,
You can find the workbench request for the report by displaying the report and following this path in the menubar.
Utilities > version > version management.
If you want to add this request into another request goto SE01 and there you will find the icon for adding the objects for your request.
Regards,
Anuj

Transport for local workbench request

Similar Messages

Maybe you are looking for