Transport for MP failed - Says assignments not maintained

Hi guys,
I tried to transport a MP and it failed saying that Assignments for InfoObjects have not been maintained. I am not sure wht it means. Infoobjects seem to be properly assigned.

Hey, maybe an infoobject is missing in the target system.
Manually check and see if all infoobjects used are Active in target system.
Did you try re-importing it.
Uday-Ram Chamarthy

Similar Messages

Bad news for "connection failed, wlan / wifi not f...

Sometime ago I wrote this in my blog: Conn. failed Wlan not found
And, like most of you who are now reading this post, I've spent hours trying to google a solution, totally without success. But at least, after so much reading and learning, I've come to a definite (and very teaching) conclusion: this issue is due to nothing less but a shameful bug in Symbian^3's DHCP client. There's no blaming the router's settings or characteristics, because with exactly the same routers and settings, most other phones can connect.
However, I always hoped that the Nokia crew were taking note of this bug and working on it, and I've spent months waiting for a fix in some of the firmware updates. I've done two updates since I got the phone (mine is a C7, but I believe it's a Symbian^3 "feature"), to no avail: disheartedly, both times I've seen that the bug remained there.
"Maybe in Symbian Belle?" I said to myself. "Of course. They can't be that blunt! The've got to fix it in Belle." So, yesterday I updated my C7 with the "leaked" Belle firmware and, you know what? Yes! They've been certainly working on the bug! This way:
So far, when trying to connect to some wireless routers we got the error message: "Conn. failed. Wlan not found". Now, after making us wait so much for Belle (and not yet officially released), there's no such message any more!
Oh, well, certainly we still can't connect to the router, but now the message reads: "Connection failed. Wi-fi netw. not found".
Nokia, this is un-be-lie-va-ble. I know you're reading this. Will you ever fix the mentioned problem in Symbian? It's no small bug, folks.

Hi Torben
Thank you for contacting Nokia Care customer support.
Since we wrote last I have got a lot more experience with the Belles situation in this area.
Recently suspicion fell on a bug in old saved data from the "Anna" that causes general network error.
To solve it, there must be a backup - but NOT the programs / settings, since they bear the error.
Subsequently, disconnect the phone from, select the Offline profile (Press and hold the cards on the off button and choose the one on this list)
"Ring" now * # 7370 # accept and enter the security code is 12345, if it asks for it.
Your security code if you have change it.
Set Time & Date and reviewing start-up menus.
Get immediately sent to the settings for data and multimedia.
Restart your phone and try now about the Internet is working properly.
Do they do it; you can safely restore contacts and whatever else you have in your backup.
I would personally appreciate it if you want to participate in a brief survey that will be about my response to you. Customer survey will receive a separate e-mail.
If there is anything I can do for you, then you're obviously more than welcome to contact me again.
Sincerely
Jannik Petersen
Nokia Care

SQL Server Installation failing saying 'Could not write values to registry key \SOFTWARE. Verify you have sufficient access or contact support personnel'

Hi,
I am trying to install SQL server 2012/SQL Server 2014 and I constantly keep getting this error and the Management Tools fails to install.
'Could not write values to registry key \SOFTWARE. Verify you have sufficient access or contact support personnel'
Tried installing even SQL Server 2008 and still get the same error.
Below is the log i get from C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140705_151943\sql_ssms_Cpu64_1.log
MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegAddValue(Name=SQLPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools,)
MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegAddValue(,,)
MSI (s) (FC:D8) [15:22:55:746]: Note: 1: 1406 2: 3: SOFTWARE 4: 5
MSI (s) (FC:D8) [15:22:59:434]: Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
MSI (s) (FC:D8) [15:23:03:435]: User policy value 'DisableRollback' is 0
MSI (s) (FC:D8) [15:23:03:435]: Machine policy value 'DisableRollback' is 0
Action ended 15:23:03: InstallFinalize. Return value 3.
Just not able to figure out what the problem is, can someone help?
Thanks

Hi,
Thanks for providing log
Following is in the log.
01) 2014-07-09 11:08:53 Slp: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
(01) 2014-07-09 11:08:58 Slp: Watson bucket for generic failure has been created
(01) 2014-07-09 11:08:58 Slp: Error: Action "Install_sql_ssms_Cpu64_Action" failed during execution.
(01) 2014-07-09 11:08:58 Slp: Completed Action: Install_sql_ssms_Cpu64_Action, returned False
(01) 2014-07-09 11:08:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-09 11:08:59 Slp: Running Action: Install_sql_tools_Cpu64_Action
(01) 2014-07-09 11:08:59 Slp: Sco: File 'D:\Softwares\SQL2012\DeveloperEdition\x64\setup\x64\sql_tools.msi' does not exist
(01) 2014-07-09 11:07:00 Slp: Sco: File 'D:\Softwares\SQL2012\DeveloperEdition\x64\setup\x64\sql_ssms.msi' does not exist
(01) 2014-07-09 11:07:00 Slp: Checkpoint: PREINSTALL_SQL_SSMS_CPU64_ACTION
(01) 2014-07-09 11:07:00 Slp: Sco: Waiting for service 'msiserver' to accept the stop request.
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to open SC Manager
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to open service handle for service msiserver
(01) 2014-07-09 11:07:00 Slp: Invoking QueryServiceStatus Win32 API
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to close service handle for service msiserver
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to close SC Manager
(01) 2014-07-09 11:07:00 Slp: Target package: "D:\Softwares\SQL2012\DeveloperEdition\x64\setup\sql_ssms.msi"
(01) 2014-07-09 11:07:57 Slp: MSI Error: 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
(01) 2014-07-09 11:08:38 Slp: InstallPackage: MsiInstallProduct returned the result code 1603.
(01) 2014-07-09 11:08:38 Slp: Using MSI error code to detect the retry option: 1406
(01) 2014-07-09 11:08:38 Slp: No retry-able MSI return code detected.
(01) 2014-07-09 11:08:38 Slp: Watson Bucket 2
Original Parameter Values
From above it seems client tools component is missing from Installation or may be problem with Windows installer but I guess this is not issue with windows installer . Can you re download SQL Server package and run again.
Edit: For further analysis can you also post log from below location on skydrive
C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140709_104804\sql_ssms_Cpu64_1.log
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

OS Update/Connection to PC fails/ says device not installed properly???

I connected my Playbook to my computer after the most recent OS update to back it up. Windows 7 ticked along and then said it could not install the device properly. Now with the Playbook connected I cannot get the Blackberry Desktop Software to work because the Playbook is not installed correctly.
I went to the Device section in the control panel when the Playbook was connected and it indicates a RIM Network Device but doesn't let me delete to have it reset or whatever and when I troubleshoot it it says the device is working properly. But obviously it isn't. The RIM Network Device disappears when I disconnect the Playbook so I can't delete the device that way either.
In addtion, in the past when I connected the Playbook, I got a drive designation for it. This time I don't.
Any help would be very much appreciated.
Thanks.

As with most any electronics and software, reboots fix many things as it was made by humans and we do make mistakes.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Why does the Latest update for iOS 7 say firmware not compatible

Hi,
I have tried updating my daughters iPad mini (original not retina) with latest update. I have it connected to the mac via iTunes and it downloads the update ok. When it tries to install it it says the firmware is not compatible. It is a wifi only model. I have updated 4 iPhones, 1 identical iPad mini and my iPad 2 with no problems. Can anyone help?
Thanks

Reset iPad and try again.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Preparing virtual domain controller for cloning fails because DC not in cloneable domain controllers group

Hi I am running a virtulized server 2012R2 DC DC02TL.test.local in a lab environment. I want to clone the DC. I am following this tutorial.
http://blogs.technet.com/cfs-file.ashx/__key/communityserver-blogs-components-weblogfiles/00-00-00-48-12-metablogapi/0020.clone3_5F00_49D67345.png
I put the DC into the Group of clonable Dcs but somehow the CMDLet
New-ADDCCloneConfigFile
does not seem to recognize that the DC is in that group and fails. I tried to reboot the DC, but no luck.

https://support.microsoft.com/kb/2745013?wa=wsignin1.0
This link may help you.
Darshana Jayathilake

Error material not maintained by purchasing when creating info record

Hi Expert,
I have an issue when creating info record, error says "Material ******* not maintained by purchasing". I've checked in MM03 purchasing view, all has been maintained and at the bottom there is message says "No plant-specific data exist". Accounting view also maintained. I've also checked in MARC table for this material and plant. It existed. I cannot see anything wrong on the material master setup but not sure why am i having this error...
Please help.
Thanks,

Hi,
Error says "Material ******* not maintained by purchasing" & you checked purchasing view has been maintained.
OK. Just cross check following optionS
Option-1: You creating info- record for material with combination of plant & vendor....check did the material have purchasing view for same plant-the info-record you are creating!
Option-2: If no purchasing view for material with same plant , just extend in t.code MM50 for E Purchasing
Option-3: Check the material for same plant, did Procurement type F (External procurement) is there
Option-4: Check Profit Center in Plantdata/ sto-2 view of material.
Regards,
Biju K

Tax number USA not maintained error in F110 and PMW interface

Dear All,
We are using F110 and creating output file using DMEE. After I run the APP and go to env->pay med->DME Adm i get the message 'No record found' in the TCode FDTA. When I go to Env->pay medi-> display log I get the log giving warning message Tax number USA for company code 1000 is not maintained. In the global setting for the co code no field appears for USA TAX Number even after scrolling down. What is the solution to this problem? Where do we find the field?. Please guide

Dear Vinda,
Please follow:
1 - Enter t-code SE16.
2 - Enter table T001Z.
3 - Enter your Company Code from IN.
4 - Hit Execute - F8.
5 - Clique 'new entry' - F5 (If you cannot, ask for a Basis or use '/h' to clear the process).
6 - Enter your C-code IN, param. type = SAPTIN and Parameter value = 'your required number'.
7 - Save - crtl+s
If you got no entries in T001Z to be able advance, go to OBY6 and fill awhile any field with tec name 'PAVAL'. Go back and execute.
This procedure may not change OBY6 view, anyway try another test to check if table T001Z takes place in F110.
Let me know the results.
Regards
Marssel

In chrome browser says : "could not load adobe acrobat npapi plug-in version 10.1.4" whenever i ne

I have not been able to use chrome browser the last month for documents: display says : "could not load adobe acrobat npapi plug-in version 10.1.4"
I haven't been able to figure out how to fix this, does anyone know what i need to do

Go to chrome://plugins and enable chrome plugin 'Chrome PDF viewer'.
Regards,
Ravi.

Excise invoice tab appearing even though J1ID not maintained

Dear All,
For one plant we have done all excise related settings in customization.
For domestic excise will be applicable, while for Import procurement excise to be covered under cost, so we do not need excise tab appearing while doing MIGO for import.
We have not maintained data in J1ID for that particular Material, while Vendor details is maintained in J1ID as it is required for other plants. Though we are getting excise tab while doing MIGO for import. What can be the issue, kindly guide..
Further ..we have maintained this material in J1ID for other plant but not with this particular plant.
Thanks n Best Regards

There are several parameters which will be checked during MIGO like Plant Excise Indicator, Vendor Excise indicator, Valid Tax code and Movement type Relevance for Excise.
If the above criteria is met, system proposes Excise tab though Material & Chapter id combination is not maintained. Depending upon the settings, you get warning or Error message during MIGO for Material & Chapter Id existance.
If the Material is not excisable, you can simply choose No Excise option in MIGO Header under Excise tab.
If the Material is Excisable but Cenvat Credit is not applicable then you have option to change the Material tab under excise tab as Non Cenvatable. This will load the duties on to the Material cost.
I have added the below explanation in addition to my previous reply.
I found something interesting while checking the Excise tab determination during MIGO. System is First checking for Material type and Chapter id in J1ID with Combination of Material and Plant. If found, it will bring the Excise tab in MIGO. If not found, it will search for Material type and Chapter id in Material code only in J1ID. If found, it will bring Excise tab. If not found here also, it will treat the Material as Non Excisable and doesnot propose Excise tab. If you donot want the Excise tab in MIGO, ensure you remove J1ID setting in Node Material and Chapter Id combination. If your Material code is Excisable in Some Plants and Non excisable in other Plants. Then Maintain J1ID with Material type NonCenvatable for those Plants where Material is Non Cenvatable. If Material is Not at all Excisable then donot maintain J1ID in any of the Plants. By doing so, you will not get the Excise tab. Please note that, If you remove MIGO settings from Excise group, then you will not get the Excise tab for any of the Material code belonging to that Plant's Excise group. This is what i understood from the Standard design. In case, if you feel system is behaving differently than i described, do let me know.
Message was edited by: Ashok Kumar Telugu

I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

Download a free app and try again, you can delete the free app afterward.

Delta Fail - Fiscal year variant FP is not maintained for fiscal year 2011

Afternoon all,
One of our overnight deltas failed with the error msg
"Fiscal year variant FP is not maintained for calendar year 2011"
I've since in SPRO under Maintain fiscal year variant created the correct entry for 2011 which mirrors the R3 source system. However when i run a repeat delta the same error occurs.
Thinking i may have missed a setting i have since transferred the global settings for fiscal year variants from the source system in RSA1 and again ran a repeat delta...same error.
On the advice from other threads in the forums i've checked in OB29 and it appears fine, and also checked tables T009 and T009b again without success.
Does anyone know of anything else i can try?

hi,
hope run the delta after the attribute change run could solve the issue.
hope u may have the below posts already if not chk out
Fiscal variant maintence
Maintaining Fiscal Variant Between R3 and BW
Fiscal variant not maintained for Calender year
Ramesh

Fiscal year variant GL is not maintained for calendar year

Hello Experts,
I have encountered a weird error in my QA box,
that says
"<b>Fiscal year variant GL is not maintained for calendar year</b>"
it only happen in 2 of my reload records, I have a formula in My Update rule in Fiscper the code is
CONCATENATE( Fiscal year, '001' )
does anybody has an idea why the failed load only happen on two records only? can I debug the formula like the Start Routine?
Thanks and Regards,
Chris

How do you fill the InfoObject 0FISCVARNT? If it is deleivered from file or so please check the value of this object. Or if GL is the correct value but GL is time-dependent, it might be that you wrote data to fiscal year 0000 and GL is not defined for 0000.
Best regards
Dirk

Can anyone answer why in logic pro X I keep getting a window popping up that says Directory not found, result code= -120, followed by another window saying, Fade update failed, (error -120)?

Can anyone answer, why in Logic Pro X I keep on getting a window popping up saying, Directory not found, result code = -120. Followed by another window saying, Fade update failed, (error -120)?
I am running the latest version 10.0.5 through a Macbook Pro that has just been upgraded to 16GB Ram and a 960GB SSD which has made it as fast as ****. I upgraded because I was experiencing problems before and it was suggested that I didn't have enough Ram?
I am using a Focusrite scarlett 2i4 and an Alesis Q61 midi controller. Weirdly, just trying to put a bass line down on a track using the Alesis, the bass sound goes out of tune with the track during recording only. This is very frustrating! I surely can't be the only one experiencing this?
Many thanks
Rob.

Hi
Time lost could be a problem, but.....
Sadly, I don't think that there are any Apple docs relating to networked storgae issues with Logic. Other than a 'school' or 'business' setup, NAS/OD/AD setups are not usual circumstances for audio.
If the issue is one of data backup & security, it may be enough to automatically backup the students local work folders to the NAS.
If the issue is one of the Users being able to work from any Mac and pick up their files from the server, you are not likely to resolve this problem, without copying the files to the Local Mac.
CCT

IW32: Error getting message (Text for order header not maintain in lang.EN

Hello All,
We just starting getting this message in IW32 and IW33 stating (Text for order header not maintained in language EN) then all the pre-existing description test disappeared.
We have not done any configuration change in this particular system.
Can anyone help to resolve this.
Thanks

Hi,
As with most SAP messages it is always a good idea to trust what it is saying.
The system is telling you that KG has not been created in the English language.
Go to transaction CUNI to check the settings.
Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
KG should be there and should have an English description (the message said it was not there for EN)
If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then KG?)
Steve B

Transport for MP failed - Says assignments not maintained

Similar Messages

Maybe you are looking for