Transport Function Group

Hi,
I created a new function group and assigned a function module to it. I transported the function group and function module (available in 1 request) from Dev to QA with no warnings/errors. In QA, i went to SE37, typed my FM name and tried to goto function group using the goto menu option, it says function group does not exist. It prompts for creating a function group.
In dev, when i tried to save the function group to a request, this entrry was saved in the request/task.
Function Group Texts - LIMU - FUGT - ZSLS_FGRP
I don't have any specific entry for function group in the request. Is there a way to capture function group entry in the request.
Thanks

Hi,
When u create a new function group and assign the function module for the first time, you can see only the function group name in Transport Request but the function module name will not get displayed.
Check the entries of object in to ensure the function group has been assigned to the request in Transport Request.
If you are creating other Function modules after first transport you can find the function modules names also in transport request.
Cheers,
Rema.

Similar Messages

Problem facing Transport of function group...

Hi,
I am trying to import function group from Development to Quality but I am facing problems.
The Main program (Function pool) associated with Function group gets transported but not the function group.
To transport Function group , I am going to se80 -> Edit object -> Function group name. Then it asks me for transport request.
Now this new transport reuqest consists of function group texts and report name.
After this transport request is released and moved to Q40, I find that only main program of function gorup is actually transported and not the function group.
Please help me.
Regards,
Tushar.

Hi Rajesh
Please do the following steps to include your Function group into transport request,
1) Go to SE09 and place the cursor on your request
2) Go to 1st Menu option, Then to the option "Include Object" --> Freely selected objects
3) There you select the option "Freely selected objects"
4) For type "FUGR", give your function group name and then execute.
5) Now Select the option "Save in Request".
Cheers
~ Ranganath

Copy Function Group to New Name: Transport Question

When I did this I only see in the transport Function Group with the Function Group Name under it. I would have expected to see all of the objects but I guess not?
I suppose everything will go under thge Function Group name? ie. Includes, Function Modules, etc.?
Thank-You.

When I see a thread title like this, the first question I think is "Why copy the function group".
Copying a complete function group leaves your system very open to future data corruption and other problems as patches etc change the code in the original group but do not get reflected in your copy. A repair or enhancement to the original object has the advantage that SPAU will highlight any new versions from SAP allowing you to confirm that your change is still needed.
Another option is to create a custom function that calls the standard code with customer specific pre and post processing. If both the standard and custom function are needed, then including logic based on transaction code, calling report, etc can handle this.
It is interesting to work on the upgrade of a system where there has been significant copying of SAP code - you compare the "Z" version with the original SAP code in the pre-upgrade system and nearly always find differences due to OSS notes etc that were applied without thinking of the customer copy.
Andrew

Question about Function group

Hi All,
I have to transport a function module from development to next environment. The function group has around 9 function modules among them i have edited one and assigned to a transport request. Do I have to include function group also in the transport along with the function module? pls suggest, in which scenarios we have to transport function group along with function module?
Thanks in advance.

Hi Suresh,
You dont need to transport the Function Group. You would transport it only if the FG is not available in another system or if there is any change in the main program of the FG.
If you create a New Function Module and attach the FM to this FG, then an include gets automatically added to the main program. In this scenario you may need to transport all.
Thanks & Regards,
Ram.

Error while transporting a Function Group!

HI ABAPers!
We have created many function modules in a single function group. While we are trying to transport the function group we succeeded in releasing the function group from the development server to the quality system. But while we are trying to import the same function group from the quality system, it is throwing an error 'FUNCTION GROUP NOT FIT IN SIZE'. what might be the reason for this behaviour and what would be the remedy? Please help this out and points would be awareded for the solutions.
Regards,
Kiran

Hi,
just an hint (i don't know if it will help u).
Try in se37 trx , menu "Utilities", shoul be "Repair function group" (o something like that).
Sometimes u have to do also with standard FM.
In second step, use unconditional mode -126 in your transport (call to your system admin ho to do that).
Hope it helps
Bye
Andrea
Pls reward if it helps

Maintenance View Function group transport,

Dear all,
I've made some change on the screen related to my Z maintenance view in dev. It did not requested for a transport order. Therefore I am wondering if there would be any way to transport the whole Maintenance view without having to re create it.
Regards.

Hi Nikhil,
I've tried using as u said the Transport Organizer from se80 but how can I add all object related to my maintenance view to the transport order from here. I tried with Include object then freely selected object but I 'm not sure which object to chose to make the list complete (function groups / tables...)
Regards

Transporting a Function Group

Hi All,
I created a new function group and few function modules within it. Function group is attached to one transport request. But for some reasons I want to transport it with some different transport request. So I deleted it from original request.
But now when I am trying to activate the Function Group, It is not attaching the associated function modules and includes within the function group to new transport request. It is only attaching Function group Text and Main program to transport.
Please let me know the way by which I can attach complete function group its related function modules and includes to one transport.
Thanks,
Harkamal
Fixed subject line
Message was edited by:
Rich Heilman

Hi Rich,
It is not attaching the Function group, it is attaching only "Function Group Text".
Thanks,
Harkamal

Problem in adding function group inlcude in new transport request

Hi friends,
This is regarding the issue while moving the function group developed for BAPI object to production.Include having the suffix UXX in main program of function group I am not able to change and then save in new transport request,but the same is possible in R/3 4.7 version.
Can you please help me out to get it done in ECC 6.0.
Regards,
Rajesh Akarte

Did you try to do: Put cursor on transport number-select include icon-say select freely selected objects-I usually say dev class and can highlight and select the object and save. Please reward points if helpful.
Message was edited by:
Tom M.

Regarding Transport Of the Function group

Hello Guru,
I am Facing problem while transporting the Transport Request Number From SAP 4.7 to SAP ECC5.0. The Transport is Working Fine. I am able to transport the Package, But all the object in the package except Function Group is Not getting transport.
So Please Let me Know any other method is there to transport the Function Group.
Please Help me it is urgent.
Thanks in advance.
Best Regards,
zubera

Check your transport, it should contain an entry for
R3TR - DEVC - 'your package name'
This should tranport the whole package including all the objects,
Regards,
Michael

How to add function group entry in Transport request...

Hi
I had a function group in which I had 4 function modules. I deleted one of the FM and hence in my Transport request, its entry was included. Along with that the function group was also included.
I deleted that function group entry by mistake. Now I want to add back my function group into the transport. How do I do that ?
thks

Hi,
Please follow below steps:
1) Go to SE01
2) Click on create New workbench request and give desc once popup appears, Click Ok
3) Now open the trasport in edit mode
4) Add
Program ID - R3TR
Object Type - FUGR
Object name - Name of the Function group
>note that if you tranport Function group all the latest Function modules in function group along
>with screens will be included in the transport.
Regards
Shital
Formatted by: Vijay Babu Dudla on Apr 25, 2009 5:08 AM

When is the entire function group added to the transport request

When you modify a functionmodule in a function group, only the object of the functionmodule( LIMU FUNC) is added to the transport request.
When you modify an include of the function group, the reportsource of that include (LIMU REPS) is added to the transport request.
But under some circumstances the entire function group is added to the transport request (R3TR FUGR).
Can somebody clarify under what circumstances the entire Function Group is added to the transport request?

I was actually looking for the reason why I would find R3TR FUGR objects in requests for existing function groups.
What I found out is that R3TR FUGR is added to the request when :
- the function group is created
- a function is renamed
- the function group is deleted
- you choose : Write Transport Entry, in the context menu of the Function group.
The actual problem was that in our upgraded system (ERP2005) we had a transport containing the function group (R3TR FUGR) and we thought none of these actions had been taken. After talking to the developer in question, I found out he did rename a function module, so I have my solution.
But thanks everybody for the insight.
Message was edited by: Dries Horions

Transporting Function Module & Function group

Hello All,
I want some clarification in transporting a FM, FG, Extract Structure.
First I collected Function Group in a Transport Request (R3TRFUGR********) and collected Function Module in the same request and also the extract structure.
This Function Group have only one Function Module and 4 Includes (LRSALK01, LRSAXD01, LZ_BI_DS_DATATOP, LZ_BI_DS_DATAUXX, RSAUMAC).
Do I need to collect these includes separately in the same request or is it enough if i collect only function group and function module and move the request.
Please let me know.
Thank you.

Hi Saptrain,
the best is always to let the system handle it: As soon as you assign an object (function group, function module, include or whatever) to a package, it will ask for a transport. Create the transport and the transport management system will include in the transport what has to be transported.
As far as I know (but I never have the question), a function group (R3TR FUGR) will transport everything that is in the function group: All functions, all modules, all includes, screens, texts, status and...I think even test cases
You will find FUGR in the transport after creating the function group.
If you change something after releasing the transport, it will transport only the changed objects (i.e. includes)
Regards,
Clemens

Neccesary to include Function group in Transport Request?

Hi,
I had changed a Function module logic slightly and wants to trasport it to the production.
But in the transport request the object present are only FM and nothing else.
Once there was a big problem beacuase i had trasnsported only FM and not the Function group associated with the FM.
So i should add the Function group to the trasport request in which the modified FM was included? Or is it OK?
Raj

Hi Raj,
U should also Include that F.G. along with modified F.M.
Hope it will help u.
pls reward if helpful.

Function group - transport order

Hi people,
I have a question. I have released a transport order in which there was a group function. Now, i have to modify a FM of this FG. I have created a new transport order but i have not created a new FG. Is it correct? I need to create a new FG? How i can join my fm into the new fg?
Thx in advance

Ok, thx guys.
I believed it too. There was not necessary create a new function group but when i have gone to SE01 (transport orders) i have seen:
DESK922495
- function module Z_RFC_CLIENTS
- tables, definitions, etc
And in others transport orders
DESK922239
- function group ZF01
- tables, etc
Then i have doubted because in theory my RFC is comprised for ZF01 too. But i suppose it is normal.
Thx
note RFC is the fm that i am changing.

Function group - Transport Failure

Hi,
We are importing the Fucntional Group into the quality systems. The import always fails because the transport is failing to import all the includes of the Function group. We can individually import the includes but this is not the solution in long run...
Do any of you had this issues????
Raj

hello rajinder,
Do one thing. Go to SE80.Give the function group. On pressing enter you will get all the function mudules/includes in the group. Select the function group and do a right click. You wil get the option to transport in the resulting list. Save all the changes in the transport and transport it to QF1. I hope it works for you.
Please let us know if the issue persists. Will try to give u more inputs.
Please award points if the answer was helpful.
Regards.
ruchit.

Transport Function Group

Similar Messages

Maybe you are looking for