Transport - Generation of the users of the transported Includes.

Hello.  This isn't iSeries specific, but I posted it in the Netweaver Administration forums and got no response.  I know this group is quite responsive, so I thought I would try my luck here.  Thank you.
When importing a transport, there's a step during "generation of programs and screens" called: Generation of the users of the transported Includes.
Can someone tell me how the list of objects for 'Generation of the users of the transported Includes" is determined?
I'm practicing our upgrade in our test system and I've run a transport twice with very different results, from a timing perspective. I ran it once last week when doing the upgrade post steps. We deleted the system, started another practice run, and I ran the transport again today.
The first time the transport took 18 minutes to import. Today it took 2 hours. The load on the server was comparable both times. The difference I noticed was that the number of objects during phase: Generation of the users of the transported Includes was much greater this time - about 3000 more.
This is a big transport, all of our SPAU resolution, but I don't know why there would be an extra 3000 things to generate this time through.
If someone could explain this to me, I would appreciate.

Hi TJ,
at least SAP tries to generate the dependent objects. This is known, to not work really properly, but at least it is the idea. Might it be possible, that the system you were putting this transport in, had not generated most of the loads ? Then I could imagine, that it creates a lot more generation ...
Did you check, that the major difference was in the generation phase ?
I'm sure, that if you had a "good generated system" before, it will be faster again ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Similar Messages

  • Stop the report from firing until the user clicks the Go button?

    Hi All,
    Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
    Thanks

    Thanks for the replies,
    In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
    It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
    Thanks

  • How to find out the user from the Jobs queue in Report server

    Hello All!
    I have a doubt about finding out the user from the scheduled jobs queue. Say I go ahead and schedule a report on Reports Server how can I find out the user name. When I view the jobs using showjobs I could see that the DBMS_JOBS table has a column under "Job Owner". But it invariantly shows it is "rwuser". So is there a way to find out which user has scheduled which job?
    Regards
    Shobha

    hi,
    The below tables will give only the name .
    USER_ADDRS
    USER_ADDR
    USER_ADDRP
    USR02
    i think you need email address .
    you can use this Tcode : su01d
    and give the user name and excute it
    i hope it will help you.
    Ram
    Edited by: Ram velanati on Jun 30, 2008 6:57 PM

  • How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

    How to let the user define the colors for each plots in the graph (I
    use LabVIEW 7)?

    Hi,
    Take a look at this example, it uses property nodes to select tha
    active plot and then changes the color of that plot.
    If you want to make the number of plots dynamic you could use a for
    loop and an array of color boxes.
    I hope this helps.
    Regards,
    Juan Carlos
    N.I.
    Attachments:
    Changing_plot_color.vi ‏38 KB

  • Sending an email to the user if the WEBi scheduling failed in CMC

    Hello Everyone,
    Current scenario :
    I am scheduling WEBi report through CMC and the report is going to end user email as an excel attachment.
    Desired Functionality :
    What happens is if the scheduling fails due to some reason. The email does not go to the end user on a particular date and then he complaints.
    What i need here an email sending option that if the WEBi scheduling has been failed in CMC an email should go to the user saying : " The WEBi scheduling has failed. The team is working on it " . (This is just a sample message)
    So the idea is to send an email to the user when the WEBi scheduling fails in the CMC. How to achieve this ?
    Regards,
    Ashutosh Singh

    Hi Ashutosh,
    You can send an alert email to a group when the schedule fails to run by choosing the "A job has failed to run" option under notification.
    You can see this option only if you schedule the report through CMC.
    Regards
    Sunil

  • To identify the user running the job at runtime

    Hi All,
    My requirement is to develop a program which need to send mail only if a particular user runs the job.
    I need to read the user who runs the job at runtime, i tried with SY-UNAME but it holds the user name of the person who created the job at runtime.
    Please suggest me the possible ways of identifying the user running the job at runtime.
    Thanks in advance!!!
    Regards,
    Dinesh.

    "I need to read the user who runs the job at runtime, i tried with SY-UNAME but it holds the user name of the person who created the job at runtime."
    This is not true if your program/form/method is called inside the ABAP report which is executing in the batch job step. There, the active SY-UNAME is the user entered in SM36 as the job step user. It is not the user who planned/scheduled the job.
    It is unclear from your description where your program is actually running. Is it another (ABAP) step belonging to the same job or is it actually some routine called within the same job step that you are checking or is it a program totally unrelated to the batch job in question (in that case, check out the other answers about TBTCO/TBTCP)
    - Alex

  • How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

  • How to get personnel number of the user in the wd java code in Leave reques

    Hi all,
    we are using the standard Leave Request Applicatin ESS.
    can any one please tell me how to get the personnel number of the user in the WD java code?
    cause i have pass the pernr number to a bapi and get the details.
    please help me its urgent.
    thanks in advance.

    Hi Madhu,
    Create a model for the particular bapi in wd java and acess it in your component. Then pernr parameter will be available in the context and u can pass value for the parameter (pernr) to the model and get the output.
    If you hav any doubt, please let me know.
    Regards,
    Jithin

  • Is there a way to automatically add a page to my current form when the user marks the check box?

    I have an existing expense report form that I created using Adobe Pro's Form Tools. The user enters all the appropriate information (ie, vendor, amount, business justification, etc.) and then it calculates all the expenses at the bottom.
    I have added a box next to each line item to be checked by the user in the case that they have an expense with a missing receipt.
    Is there a way to have a pre-existing missing receipt form, be added at the end of the expense report, each time the user marks one of these missing receipt check boxes?
    If so, is there a way to have all the expense line item data automatically fill in the information on the added missing receipt form?
    I am using Adobe Pro's Form tool rather than Livecycle because it is compatible with my IPAD.
    Thanks,

    One word: Templates
    For more information, see: page: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_Dev_Templates.80.1.html
    Unfortunately, templates don't work with Reader either, unless the document is Reader-enabled with LiveCycle Reader Extensions.

  • Can I upload a simple iPhone App that all it does is direct the User to a Filemaker Pro URL   fmp://~filename.fmp?$VariableName=Value  This launches Filemaker Go and directs the user to the Database Hosted online   Right now there is no app store for

    Can I upload a simple iPhone App that all it does is direct the User to a Filemaker Pro URL   fmp://~filename.fmp?$VariableName=Value  This launches Filemaker Go and directs the user to the Database Hosted online
    Right now there is no app store for Filemaker Go.   Filemaker Forgot about us.
    So I want to create a simple native iPhone App that all it does
    is launch
    fmp://~/filename.fmp12?$VariableName=value
    This URL will launch the Filemaker Go App
    Filemaker Go is a app that the user will have to have
    downloaded already on the device..
    The Simple Native app will launch the Filemaker Go.
    The fmp  URL has the information where the Filemaker Pro database is hosted
    and get  the user where they need to be..
    Help Me please
    iPhone 5s, iOS 8.1.3

    That would be software. And, you said "upload." That's "uploading software." Why do you question what you stated?
    I don't know where you even want to upload this software. The only way it can be downloaded to a device is through the iTunes store. Do you even know what you want to do?

  • Return the User to the Calling Page - doesn't work

    Hello All,
    I set up the "Issue tracker" tutorial to get in tuch with the apex (htmldb vers. 2.0)
    All is working well but: Return the User to the Calling Page -> doesn't work. I performed all steps as descriped in the tutorial (iclusive the '.' on the &P7_PREV_PAGE ;-) ).
    I use my own aplication at home and followed all the instruction steps few times but it does not work. Can you help me please?
    Do I have to install something more?
    In the Branch section: * 1: Go To Page &P7_PREV_PAGE. (Unconditional)
    In the Item section: 90: P7_PREV_PAGE Hidden
    In the Button section for cancel Button: &P7_PREV_PAGE.
    Here is the description of the function in the tutorial:
    Because this Create/Edit page will be called from several places, when users finish with the display they should return to the calling page. To accomplish this, you create an item and change the branch on this page. Every time this page is called, the item must be set with the number of the calling page.
    To create a hidden item:
    1. Under Items, click the Create icon.
    2. For Select Item Type, select Hidden and click Next.
    3. For Display Position and Name:
    1. For Item Name, enter:
    P7_PREV_PAGE
    2. For Region, select Issue Identification.
    3. Click Next.
    4.
    Click Create Item.
    Next, edit the Cancel button.
    5. Under Buttons, select Cancel.
    6. Scroll down to Optional URL Redirect.
    7. In Page, enter:
    &P7_PREV_PAGE.
    Note the period at the end.
    8. Click Apply Changes.
    Next, edit the branch.
    9. Under Action, enter the following in Page:
    &P7_PREV_PAGE.
    10. Click Apply Changes.
    All steps are done but I still got the message: Error ERR-1016 Application "106" Page "0" not found (requested language="de")
    OK
    I move the mousepointer over the cancel button: javascript:redirect('f?p=106:0:5265993428922076876::NO:::')
    Thank you for helping me!
    best regards Thorsten

    All,
    I haven't looked at that tutorial for quite a while but just gave it a quick look.
    Further down in the tutorial, it directs you to set the value of P7_PREV_PAGE, under Add Functionality to Support Adding Multiple Issues Sequentially - have you done that? There is also a mention that there is more branching to be done - "The branch you just created is looking for a value in P7_PREV_PAGE. Since the page was not called from another page, the value has not been set. You need to fix that next." It goes on to have you define that value from other places.
    Can you describe what you are doing when you get the error? There could be something missing from the tutorial. A way around it would be to create a default value for P7_PREV_PAGE so that if it is not set, a default page will be used.
    -- Sharon

  • The user and the mailbox are in different Active Directory Sites

    Hi All,
    I have 2 site, each site have an Exchange Server 2010 SP1, let say Site HQ and Site DRC I monitored it with SCOM 2007 R2, site HQ successfully monitored, then I continue try to monitor DRC site. I executed new-TestCasConnectivityUser.ps1 at MBX DRC Site
    to create extest user.
    Then I try to execute command to test-connectivity, but it failed.
    Test-OwaConnectivity -TestType:Internal -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true | fl
    RunspaceId                  : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
    AuthenticationMethod        :
    MailboxServer               : CONMBX02.contoso.com
    LocalSite                   : CONMBX02.contoso.com
    SecureAccess                : False
    VirtualDirectoryName        :
    Url                         :
    UrlType                     : Unknown
    Port                        : 0
    ConnectionType              : Plaintext
    ClientAccessServerShortName : DRCCAS01
    LocalSiteShortName          : CONMBX02
    ClientAccessServer          : DRCCAS01.contoso.com
    Scenario                    : Reset Credentials
    ScenarioDescription         : Reset automated credentials for the Client Access Probing Task user on Mailbox server CON
                                  MBX02.contoso.com.
    PerformanceCounterName      :
    Result                      : Failure
    Error                       : [Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while t
                                  rying to access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extes
                                  t_xxxxxxxx
                                   Additional information:
                                   [Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in
                                  different Active Directory sites..
    UserName                    : extest_xxxxxxxx
    StartTime                   : 04/01/2012 20:46:19
    LaCONcy                     : 00:00:00.0156460
    EventType                   : Error
    LaCONcyInMillisecondsString :
    Identity                    :
    IsValid                     : True
    WARNING: No Client Access servers were tested.
    RunspaceId          : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
    Events              : {Source: MSExchange Monitoring OWAConnectivity Internal
                          Id: 1005
                          Type: Error
                          Message: Couldn't access one or more test mailboxes.
                          The service that is being tested will not run against these mailboxes.
                           Detailed information:
                          Local Site:DRCProduction
                          [Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while trying to
                           access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extest_xxxxxxxx
                           Additional information:
                           [Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in differen
                          t Active Directory sites..
    PerformanceCounters : {Object: MSExchange Monitoring OWAConnectivity Internal
                          Counter: Logon LaCONcy
                          Instance: DRCCAS01.contoso.com|DRCProduction
                          Value: -1000}
    any help appreciate it.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Krisna Ismayanto | My blogs:
    Krisna Ismayanto | Twitter: @ikrisna

    Hi
       Removed existing test account on two site.
       Then created test account on DGC through new-TestCasConnectivityUser.ps1.
       Flushed Health Service on RMS.
    Terence Yu
    TechNet Community Support
    Hi
    What do you mean on DGC ? you mean I have remove both test account or just at DRC site only ?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Krisna Ismayanto | My blogs:
    Krisna Ismayanto | Twitter: @ikrisna

  • Test-OutlookConnectivity fails with '[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sites'.

    I have a two site DAG, and the command is running from the alternate site where the databases are not currently being hosted. The following command...
    Test-OutlookConnectivity -Protocol:TCP -TrustAnySSLCert:$true -MonitoringContext:$true
    ...errors with the following output:
    An error occurred while trying to access mailbox CurrentlyHostingMBServerName.InternalDomainName, on behalf of user InternalDomainName\extest_bb13200232474
     Additional information:
     [Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
    es..
        + CategoryInfo          : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
       OutlookConnectivity], CasHealthStorageErrorException
        + FullyQualifiedErrorId : F2F8AC0D,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
    I thought this command would work based on the 'AllowCrossSiteRpcClientAccess: True' option on the DAG.  The command works well if run a CAS server in the active DB site.

    Hi,
    Exchange 2013 users use Outlook Anywhere to connect to CAS server. You may run the RCA to test the connectivity:
    https://www.testexchangeconnectivity.com/
    Thanks,
    Simon Wu
    TechNet Community Support

  • When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

    When the user press the button Calculate Tax  and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
    All setup looks fine.
    Please let me know what can be done on this?
    Regards,
    Peu

    HarryAustralia wrote:
    I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
    The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
    That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
    You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
    Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

  • How do I compare two csv files and not disable the user if the username is found in the 2nd file using powershell?

    Hi Guys
    I have two csv files with the following headers and I need to import both files into the script to check whether the StaffCode is present in the Creation/Renewal of Contract csv in a DisableAccount Script so I can stop any action to disable the account as
    the staff has renewed the contract with the company so the account should not be disabled.
    However my accounts are still being disabled. I am not sure now to construct the query so that it detects that the account is to be left alone if the staffcode is present in both files
    I does recognize that the $staffcodeN in the renewal file matches the $staffcode in the termination file
    but still proceeds to disable or set an expiry date to the account anyway based on the termination file. 
    How do I stop it from doing that?
    1)In the Creation/Renewal of contract file the following headers are present
         -  TranCode,StaffCode,LastName,FirstName,SocialSecurityNo,DateJoin,Grade,Dept,LastUpdateDate,EffectiveDate
    2)In the Disable of contract file the following headers are present
        - TranCode,StaffCode,LastName,FirstName,SocialSecurityno,LastDateWorked,Grade,Dept,LastUpdateDate,
    My data is not very clean , I have a-lot of special characters such as = , ' ,/ and \ characters to remove first before i can compare the data
    Thanks for the help in advance.
    Yours Sincrely
    Vicki
    The following is a short snippet of the code 
    $opencsv = import-csv "D:\scripts\Termination.csv"
    $opencsv2 = import-csv "D:\scripts\RenewContractandNewStaff.csv"
    foreach ($usertoaction in $opencsv) 
    $Trancode = $usertoactionTranCode
    $StaffCode = $usertoaction.StaffCode.replace("=","").replace('"','')
    $LastName = [string]$usertoaction.LastName.Replace("/","\/").Replace(",","\,")
    $FirstName = [string]$usertoaction.FirstName.Replace("/","\/").Replace(",","\,")
    $socialsecurityno = $usertoaction.SocialSecurityNo.replace("=","").replace('"','')
    $DateJoin = $usertoaction.DateJoin.replace("=","").replace('"','')
    $LastDateWorked = $usertoaction.LastDateWorked.replace("=","").replace('"','')
    $Grade = [string]$usertoaction.Grade
    $Dept = [string]$usertoaction.Dept
    $LastUpdateDate = $usertoaction.LastUpdateDate.replace("=","").replace('"','')
    $AccountExpiry = [datetime]::Now.ToString($LastDateWorked)
    foreach ($usertoaction2 in $opencsv2) 
    $TrancodeN = $usertoaction2.TranCode
    $StaffCodeN = $usertoaction2.StaffCode.replace("=","").replace('"','')
    $socialsecurityNoN= $usertoaction2.SocialSecurityNo.replace("=","").replace('"','')
    $DateJoinN = $usertoaction2.DateJoin.replace("=","").replace('"','')
    $GradeN = [string]$usertoaction2.Grade
    $DeptN = $usertoaction2.Dept
    $LastUpdateDate = $usertoaction.LastUpdateDate.replace("=","").replace('"','')
    $EffectiveDate = $usertoaction.EffectiveDate.replace("=","").replace('"','')
    $LastName2 = [string]$usertoaction2.LastName.Replace(",", "").Replace("/","").trim()
    $FirstName2 = [string]$usertoaction2.FirstName.Replace("/","").trim()
    # Use DirectorySearcher to find the DN of the user from the sAMAccountName.
    $Domain = [System.DirectoryServices.ActiveDirectory.Domain]::GetCurrentDomain()
    $Root = $Domain.GetDirectoryEntry()
    $Searcher = [System.DirectoryServices.DirectorySearcher]$Root
    $Searcher.Filter = "(sAMAccountName=$samaccountname)"
    $doesuserexist1 = $Searcher.Findall()
    if ($doesuserexist1 -eq $Null)
    {Write-Host $samaccountname "account does not exist"}
    elseif ($StaffCodeN -match $staffcode)
    write-host "user has renewed the contract, no action taken"
    else
    if(($lastupdatedate -ne $null)-or($LastDateWorked -ne $null))
                        write-host "Setting Account Expiry to"$accountexpirydate
    #$ChangeUser.AccountExpires = $accountexpirydate
               #$Changeuser.setinfo()
    if ($UserMailforwarding -ne $null)
    #Set Account expiry date to Last Date Worked
    # $ChangeUser.AccountExpires = $accountexpirydate
    # $Changeuser.setinfo()
     write-host "staff" $displayname "with staff employee no" $samaccountname "has                          
    mailforwarding" 
    Write-host "Please disable the account manually via Active Directory Users & Computers and 
    Elseif ($accountexpirydate -lt $todaysdate)
    #disable the account

    Hi Vicki,
    This Forum has an insert-codeblock function. Using it will make your script far more readable
    Your script is missing some parts, it is impossible to follow the problem.
    You are performing the same string cleaning action on $opencsv2 for each element in $opencsv, when doing it once should suffice. Why not start it all by cleaning the values and storing the cleaned values in new arrays?
    The Compare-Object function is great, why not take it out for a stroll on these lists, it might just safe you lots of unnecessarily complicated code ...
    You are creating a new $Domain, $Root and $Searcher object each iteration, when doing it once should suffice. Probably not much of a time-saver, but every little thing contributes.
    Try pinpointing the problem by doing extensive logging, not only by writing which action was taken, but writing the inidividual information (variables, mostly) before evaluation occurs. Your if/elseif/else looks sound, so if it's still not doing what you
    want, the ingoing data must be different from what you think should be there.
    Cheers,
    Fred
    There's no place like 127.0.0.1

Maybe you are looking for