Transport Groups - How many?

Hi guys,
One question related to Transport OBjects in XI.
I've one central SLD.
I've one XI in a development environment and a XI in a production environment.
I've three R3's systems, one DEV, one TST and one PRD.
In groups and targets maintenance, in my point of view I'd have 3 groups.
In DEV group I'd have my R3 DEV System and the XI DEV.
In TST group I'd have my R3 TST System and the XI DEV.
And in PRD group I'd have my R3 prd System and the XI PRD.
But I'm having some difficulties associating the TST group to my R3 TST system. Since both R3 DEV and TST have the same XI environment I'm not able to add a target pointing R3 DEV to R3 TST.
What ideas do you suggest?

Hi VJ,
Thanks for the quick response.
OK, so i will R3 DEV and R3 TST associated to XI DEV and all of them grouped into DEV group. In PRD group I'll have R3 PRD and XI PRD.
One question.... SLD only allows me to add the PRD target to the R3 DEV system.... How can I map R3DEV into R3TST?

Similar Messages

How can I see how many entries in an address Book group ?

I used to be able to see at a glance how many entries there were in any particular group.
This now seems to have vanished :-(
Can I get it back easily ?

I agree with Bengt W. There are many reasons, even in a simple movie, to want to know the timing of things. This is a surprisingly frustrating product. For want of timing information, you are requiring your users to pay $300?
In my situation, I took some video of a show (with the performers permission) with an iPad and an iPod. All I want to do is make a movie with one video as the main position with a series of cutaway clips from the other. It is incredibly frustrating to do this without knowing where you are within each clip.
When helpful and capable forum participants like we have here have to spend time explaining how best to make do with a product, it's a clear indication of a fault with the product. Now, I either have to spend extra time in iMovie making due with this crippled interface, or I have to spend time looking for an alternative product.
Consider this a feature request!

How much RAM do tab groups use (on average)? Do I need to watch out for how many groups I create?

I may have gone overboard in the creation of Tab Groups. I say this because now my system is beginning to act a bit sluggish. I created 7 groups, two of which have 9 or 10 tabs. Should I pull back on the number of groups I create (as well as how many tab are located within each group). That is: How much RAM do tab groups use. How can I calibrate or understand the trade off between these markers and the amount of RAM they use?

You can see the memory usage on the about:memory page.
You can open about: pages via the location bar like you open a website.

How to manage transport groups in SLD

Hi all,
I am facing some problems while trying to create/assign transports groups to the Business systems in my SLD. (i am using PI 7.0)
I have only 2 XI boxes (one for DEV and the other one for PRD) BUT my R/3 landscape consists of 3 environments (DEV, QA and PRD). I created 3 groups in the SLD but i had to assign every group to a Integration server, so i couldnt
Could you please give me some help about how to handle this kind of scenarios??
Any ideas or examples?
Thanks in advance for your support,
David de Miguel

Do you have 1 central SLD or local on each XI?
What is the issue you are having specifically?
Have you tried creating the 2 'true' XI groups and assigning every DEV system to the DEV group and all PROD systems to PROD group.
You can choose to assign your QA to DEV group - your only QA objects should be the backend - this is not mandatory.
Make the promotion (source-target) assignment for the groups as follows DEV --> PROD
Since you are moving IR and ID objects across these groups then it will work correctly.
sincerely,
--NM

How many people can I text in a single group message

how many people can I text in a single group message on an iphone 5
I am being limited to only 10 people or phone numbers currently. I am on the AT&T service also.
Message was edited by: AndreJF

Hi there,
You can text as many people as you want at once on the iPhone 5!
Bonus: If you want to send everyone a message without each person knowing who else received the message, you can go to Settings > Messages and turn Group Messaging to OFF. Each recipient will receive an individual message.
Message was edited by: ChristianfromWV

How many vendor and customer groups

Hi,
Seniors can any one explain,
normally for foreign client
how many vendor , Customer account groups maintained in the projects
Plz give me the account group name details

Hello,
The customer / vendor account groups are mainly depends on the requirement of the client.
The requirement depends on how their customer / vendors are depends on the following things
(a) Number Range - How many number ranges are required (either channel / one time customer / Division Specific / Geographic Specific etc)
(b) Field Display / Mandatory during Master Record - Few fields are mandatory for certain range customers etc
(c) Assignment of Reconciliation Account- How your schedule -VI of the companies act required.
This is for your information.
Regards
Anilkumar

Need to know the API which will extract how many users are added in group..

Hello,
I am working in Oracle Portal. In the portal we have Oracle Indentity Management where we are adding users as well as the group. We are looking for an API which helps us to do that from PL/SQL code. We got it but we have some issue. We know that how to create group, add users to group, delete users from group, delete group but we unable to get how many users already added to the group. Can anybody help me out in this case. It is urgent!
Thanks
Golak Saha

Hi,
How to check ,how many users are logged in and logged out in oracle ebs 11i/R12.
Please check the following links:
Oracle EBS - Number of Users logged into EBS / Oracle Applications currently
List all users currently logged in on Oracle EBS
Also see forum Search:
Forum Search: Logged In EBS User
Also, in the database level too
Please see:
https://forums.oracle.com/message/9225094#9225094
Do we need to write any trigger for this?
Yes you may, But I personally suggest you not to do so as it may affect performance.
Thanks &
Best Regards,

HT2486 Where and how can you see how many members in a group?

I wish to know how many members I have in my group. In the old address book I just clicked on the group and it told me but now it doesnt. PLease help

Scroll to the bottom of the list. If the contacts inside a group are just a few, there is no counter.

How can I know how many views are maintained for specific or group material

Hello, All,
How can I get know how many views which are already maintained in the material master for one specific or one group material? And which views? Is there any T-code or table to get those views list for material?
Thank you very much

Hi,
You can check in table MARA, field VPSTA details as given below
User department     Maintenance status
Work scheduling           A
Accounting                                 B
Classification                            C
MRP                                 D
Purchasing                                  E
Production resources/tools       F
Costing                                  G
Basic data                                  K
Storage                                  L
Forecasting                              P
Quality management           Q
Warehouse managemen          S
sales                                        V
Plant stocks                                 X
Storage location stocks            Z
regards,
zafar

How many AP will wlc 5508 support in HREAP Groups?

Hi,
I have a new deployment of 44 3502i AP's in 3 buildings at one of my campus'.
The 5508 wlc is running latest 7.0.116.0 code.
I have some users who take their work with them as they go from location to location on this campus.
They need to be able to smoothly switch from AP to AP without having to reauthenticate each time the next AP takes over in the handoff.
On the ssid in question we run 802.1x back to 1 auth server; there is no failover auth server.
All APs are in one AP Group.
My thought is to add all 44 of the APs to one HREAP Group.
Will this be the best/simplest solution?
Thank you

Scott,
Thanks!
I thought hreap groups had a hard limit but I could not remember and I did not find the document when I went looking.
That was exactly my question, how many APs can be in an hreap group.
Since I have 44 APs I will probably break it into 2 hreap groups. The office group and the DC group.

HOW MANY TYPES OF transportable requests?

HOW MANY TYPES OF transportable requests?

Hi,
In R/3 Release 4.0, SAP has introduced the Change and Transport System (CTS), comprising the following tools:
1. Change and Transport Organizers(CTO)
2. Transport management system(TMS)
The Change and Transport Organizer (CTO) provides functions for organizing software development projects. It is designed to support projects of all sizes, whether they are carried out centrally or in a distributed environment.
The Transport Management System (TMS) organizes, monitors, and performs transports for allR/3 Systems within a system landscape. In addition, TMS is used to configure and manage the setting up of R/3 Systems and transport routes within a system landscape.
The Transport Management System (Transaction STMS) enables you to:
1. Define an R/3 System's role within a system landscape or transport domain
2. Configure the transport routes using either a graphical editor or hierarchical editor
3. Configure the transport tool transport control program tp.
4. Display the import queues of all R/3 Systems in the transport domain
5.Decide whether the quality assurance testing was successful in the QA System
6.Start the import of change requests in an import queue
The transports request can be of two types :
1. Customizing
2. Workbench
Customizing adapts the R/3 software to meet a company's individual business requirements by setting up the business transactions the company requires in R/3. Most Customizing is client-specific and affects only a particular client.
Workbench - Development changes are saved to Workbench change requests. Workbench change requests concern changes to R/3 Repository objects, such as ABAP programs, screens, data dictionary objects and global documentation.
To access the Workbench Organizer, use Transaction SE09
For more details go through the following link :
http://help.sap.com/erp2005_ehp_03/helpdata/EN/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Thanks,
Nitesh Jain

How many Read Only Cache Groups?

How many Read Only Cache Groups we can createin in one DSN?
I mean if e.g. 100 are possible?
Thanks
BR
Andrzej
Edited by: user8181100 on 2009-04-07 05:53

As many as you like. There is no fixed upper limit.
Chris

How many group policies can be applied to an OU?

Hi,
I just want to know about how many group policies can be applied to an OU?
I have 7 different GPOs but only 2 or 3 are applied. How can I troubleshoot this problem?
reg
A

GPOs are actually applied by users or computers. Each object can process 999 GPOs. If you have GPOs not being applied, it most likely is a scoping issue.
Check out this guide and let me know what you find:
http://deployhappiness.com/top-10-ways-to-troubleshoot-group-policy/
If my answer helped you, check out my blog:
DeployHappiness. Subscribe by
RSS or
email.

Known limit for how many characters can be entered in the To field when adding People and Groups ?

I am running MOSS 2007 SP1. I browse to site settings > People and groups and a group which has more than 60 members. I select all > Click Actions > Email Users. Nothing happens. I select less users, new outlook window comes up as it should. I am running outlook 2007. I first thought that the limit was 50 users, but different user selections let me select 51 users as well. I then concentrated on the character limit and I noticed that there were about 1580 characters in the To field when I selected 50/51 users.
Is there a known limit in sharepoint/outlook client for this function on how many characters can be entered in the To field?

Hello Amar,
This is a by-design behavior, not from SharePoint side, but Internet Explorer. The limitation by the 2083 characters in IE for the Max URL length is described in the following KB article:
(KB208427) Maximum URL length is 2,083 characters in Internet Explorer
http://support.microsoft.com/default.aspx?scid=kb;EN-US;208427
As a workaround, you may need to divide the list up and not send all the email at the same time. Hope it helps!
Best Regards,
Lionel

How many ledger groups to create with 4 ledgers?

Hello
We are using new GL in ECC 6.0. If I have 4 ledgers/accounting principles say A,B,C,D. How many ledger groups do I need to set up to allow business to select the right number of ledgers to post to?
4 ledger groups with only 1 ledger assigned: A, B, C, D
3 ledger groups with only 3 ledgers assigned: ABC, BCD, ACD
6 ledger groups with 2 ledgers assigned: AB, BC, CD, AD, AC, BD
1 ledger group with 4 ledgers assigned: ABCD
In total 14 ledger groups?
regards
Arjan

Hi Arjan,
I strongly feel it should be 4 with A, B, C & D unless you have any specific requirement to group them.
Just as a question, do you have specific business requirement to group each of them?
Thanks and regards,
Madhu

Transport Groups - How many?

Similar Messages

Maybe you are looking for