Transport in differnet Operation System

We have Development system (ECC 6.0) on Window 2003 with Oracle database and QA (ECC 6.0)
on HP-UNIX.
Is it possible to transport between two differnct operation system but same database.
Thanks....

Hello Gangadhar,
No need for transport routes and domain. Only data files and co files are needed.
Hello Julio,
You can easily do this transport. I have done it quite a few times.
Regards.
Ruchit.

Similar Messages

How to release a Transport Request at operating system level

HI,
How to release a Transport Request at operating system level. Please specify the complete commands along with the pf parameters for TP Export only.......

tp export <request>
This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions
tp cleanbuffer <sapsid>
This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
tp delfrombuffer <request> <sapsid>
If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
Reward points if you find this helpful to you.

Apply Operating System Failed

Environment: SCCM 2012 R2 CU3
Background:
Prestaged image was applied to machine. The prestaged image was created based on our old TS which only contains winpe boot image and the windows 7 operating system. WINPE v4.0 was still used in this prestaged image. We recently updated our TS with WINPE
v5.1(we did not create a new prestage image) in order to accommodate the installation of SCCM client R2 CU3 during the build.
Build Process:
Powered on the machine and boot to the hard disk(since prestaged image was already applied to the machine). After selecting our TS, it starts to download the WINPE v5.1 and then asks for a reboot. After the reboot, it starts to apply the operating
system but will fail afterwards. Snippet of the error in smsts.log can be found below.
What we have noticed:
If we don't change the boot image of the TS to WINPE v5.1 and still use WINPE v4.0, we don't encounter the error. The only time we encounter the error is when we change the boot image of the TS to WINPE v5.1. Note that I can ping the FQDN of the Primary
server and the dp when using WINPE v5.1
Snippet of the Error:
DownloadOnDemand flag is true. Attempting to download content locally for Package ABC003CA. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Locations: Multicast = 0, HTTP = 1, SMB = 1. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Package Flags: 0x08000081 ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Trying http://sccm01.contoso.net/SMS_DP_SMSPKG$/ABC003CA. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
GetDirectoryListing() entered ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
No credential information in environment. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Initializing HTTP transport. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Setting URL = http://sccm01.contoso.net/SMS_DP_SMSPKG$/ABC003CA. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Address=http://sccm01.contoso.net, Scheme=http, Object=/SMS_DP_SMSPKG$/ABC003CA, Port=80. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Setting Authenticator. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Set authenticator in transport ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
CLibSMSMessageWinHttpTransport::Send: URL: sccm01.contoso.net:80 PROPFIND /SMS_DP_SMSPKG$/ABC003CA ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
401 - Unsuccessful with anonymous access. Retrying with context credentials. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Using thread token for request ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
401 - Unsuccessful with context credentials. Retrying with supplied credentials. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Network access account credentials not supplied. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
401 - Unsuccessful on all retries. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
SendResourceRequest() failed. 80190191 ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
SendResourceRequest(), HRESULT=80190191 (e:\qfe\nts\sms\framework\tscore\downloadcontent.cpp,516) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
oDavRequest.GetDirectoryListing (setDirs, setFiles), HRESULT=80190191 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,2516) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Download() failed. 80190191. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Trying \\sccm01.contoso.net\PACKAGES\UNATTEND-ENG-B2\. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
nPos != CCM::Utility::String::npos, HRESULT=80004005 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,238) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Creating a connection to
\\sccm01.contoso.net\PACKAGES\UNATTEND-ENG-B2\ with default account ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Connection request for "\\sccm01.contoso.net\PACKAGES\UNATTEND-ENG-B2" ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
No credentials available for connecting to "\\sccm01.contoso.net\PACKAGES\UNATTEND-ENG-B2". See whether the share has already been connected. ApplyOperatingSystem 1/28/2015
11:17:21 AM 1936 (0x0790)
Connecting to "sccm01.contoso.net\PACKAGES\UNATTEND-ENG-B2" ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Unsuccessful in connecting to
\\sccm01.contoso.net\PACKAGES\UNATTEND-ENG-B2. Invalid username or password. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
reconnect(), HRESULT=80070005 (e:\qfe\nts\sms\framework\tscore\tsconnection.cpp,129) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
connect(pszPath, pszAccount, pszPassword, L"", uFlags), HRESULT=80070005 (e:\qfe\nts\sms\framework\tscore\tsconnection.cpp,148) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Unsuccessful in connecting to or accessing
\\sccm01.contoso.net\PACKAGES\UNATTEND-ENG-B2\ with default account. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
No credential information in environment. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Creating a connection to the share
\\sccm01.contoso.net\PACKAGES\UNATTEND-ENG-B2\ with network access account ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Failed to access the share
\\sccm01.contoso.net\PACKAGES\UNATTEND-ENG-B2\ with network access account ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
DownloadContentAndVerifyHash() failed. 80070002. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
DownloadContentAndVerifyHash ( pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, mapNetworkAccess ), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,3052) ApplyOperatingSystem 1/28/2015
11:17:21 AM 1936 (0x0790)
DownloadContentLocally (pszSource, sSourceDirectory, dwFlags, hUserToken, mapNetworkAccess), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,3273) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
TS::Utility::ResolveSource(configPackageID, packagePath), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installcommon.cpp,958) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Failed to resolve source for configuration file package ABC003CA (80070002) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
ReleaseSource() for C:\_SMSTaskSequence\Packages\ABC003CA. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
The user tries to release a source directory C:\_SMSTaskSequence\Packages\ABC003CA that is either already released or we have not connected to it. ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
CopyConfigFile( this->configPackageID, this->configFileName, this->configFilePath ), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,874) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
InitConfigFile(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1852) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Configure(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,2028) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
Installation of prestaged media image failed to complete..
The system cannot find the file specified. (Error: 80070002; Source: Windows) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
installer.install(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,2094) ApplyOperatingSystem 1/28/2015 11:17:21 AM 1936 (0x0790)
InstallImage( g_InstallPackageID, g_ImageIndex, targetVolume, ImageType_OS, g_ConfigPackageID, g_ConfigFileName, bOEMMedia, g_RunFromNet ), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\applyos.cpp,509) ApplyOperatingSystem 1/28/2015
11:17:21 AM 1936 (0x0790)
Process completed with exit code 2147942402 TSManager 1/28/2015 11:17:21 AM 1840 (0x0730)

WINPE v5.1 is not supported and does not work, are you sure you are using it and not PE 5.0? Note that the ADK for Win 8.1 Update does *not* create WinPE 5.1 boot images, it creates WinPE 5.0 boot image that you can then modify to be WinPE 5.1 by injecting
the appropriate updates.
The above log file clearly shows authentication issues and calls out the fact that no Network Access Account is set.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to change data in decision table using excel file in operating system?

Hello, BRF Experts
I now brf + for the first time in the current project is being developed.
Now, project has been facing a big problem.
Develop system that was developed in the history of decision table in the operating system can be used to update excel file, etc. I do not know whether.
So, I was tested, but can not change data in decision table.
[ error message : system is not change allowed ].
The operating system itself to the current system setting is immutable and check it
: changes and transports for client-specific object -> no changed allowed
: cross-client object changes -> no changes to repository and cross-client customizing object.
Decision table in the operating system can update the details if I want to know what to do.
Maintenance view can be modified in the operating system as a decision table, I wonder if you can create a view.
Edited by: Sung-Wook Ha on Jan 13, 2012 2:02 PM

Hi ,
Exchanging data with Microsoft Excel is done with the help of the XML-based file format (file extension .XSLX) introduced with Microsoft Excel 2007. If you are using an older version of Microsoft Office, you can download the Microsoft Office Compatibility Pack to upgrade the supported file formats from the Microsoft Download Center ([Exchanging Decision Table Data With Microsoft Excel |http://www.microsoft.com/downloads/details.aspx?familyid=941b3470-3ae9-4aee-8f43-c6bb74cd1466]). Once you have downloaded the Compatibility Pack, you have to install it on every workstation that has an older version of Microsoft Office installed.
Please refer the link-
[BRFplus-Data exchange with MS Office 2007|http://help.sap.com/erp2005_ehp_05/helpdata/en/b8/e03486d1df48c6baa3c4354f5198ee/frameset.htm]
Hope this helps.
Thanks,
Ajay

Client copy between different operating systems.

Hi Experts,
Our production system is running on HP-UX OS. We are installing a standby quality system and planning to do a client copy to this system from production by taking this into transport domain. But this new system is in windows. So, is it possible to perform a client copy where the source system is HP -UX and target system is windows??
Regards,
Amit.

Hi Amit,
Follow SAP Note 552711 for client copy. Refer to qns no 4 & 5, which is relevant for your question.
Can I create client copies in a heterogeneous system landscape?
Remote copies or client transports can also be carried out between different database and operating systems.
Regards,
Debasis.

Need Transport route for two systems(Urgent)

Hi All,
I have configured everthing like configuring domain controller and added to to domain controller.
Now i need to do below steps
I have Development (client) and Quality(client) in same system and Production as separate server.
I want to configure transport route from Development client to Quality client and from Quality client to Production Server.
Development Server SID is DEV ( Dev Client 100 and Quality Client 140) and Production Server SID is PRD
Transport route must be configured like below:
DEV( Dev client 100) -> DEV (QAS client 140) -> PRD
We are struck with this
Best Regards,
Pratyusha

Hi Pratyusha,
As far as configuring Development and Quality systems concern, in one system is not suggested. I think you are aware of this.
However, I need some more information on your question like the operating systems which you are using in DEV/QAS and in PRD.
First, configure the Domain Controller in either DEV/QAS or PRD.
Irrespective of the OS, you need to maintain IP address along with the host name and fully qualified domain in the etc/hosts file.
for example DEV/QAS system ip address is 172.16.23.14 and host name is abc007, then you need to make an entry in etc/hosts file at the OS level as follows.
172.16.23.14 abc007 abc007.yourcompany.com
where in abc007.yourcompany.com is the fully qualified domain name.
Once you done this in both, DEV/QAS and PRD, systems, then configure 3 system landscape from STMS tcode in the other system which is not a Domain controller.
I hope this is helpful. Getin touch if you have any more questions or doubts.
Regards,
Satish.
Edited by: Satish Arram on Jul 31, 2008 2:06 PM

IPop Use with different operating systems Windows And Mac Osx

so the quetion is this can i use my IPod with different Operatin systems?
I have a MacBook at home where i keep all my Music in and at the office i have a Windows network i would like to carry some music from home to the office using my IPod. I thought that a solution is to Partition my Ipod 40G in 2 parts and have one of them FAT so that my Windows operating system can view it.
Did any of you done it? and if so How? did you loose the use of some of the IPod functions?
let me Know if there are ways to carry music using your Ipod from the MacOSX to Windows Prof or home edition thanks!
Donatello

Your problem has nothing to do with data vs music. Music IS data. I've used my iPod for data and music since the first iPod was released. There's no reason to think the two OS versions are involved either.
Look at your usage practices - and I'm not necessarily suggesting you are abusing your computer. Has one of your computers crashed while the iPod was connected? This could cause data damage that might explain the problem. Have you ever disconnected the iPod without un-mounting it first?
You might also be creating fragmentation problems if you frequently add and remove data files while at the same time adding and removing music. One decision I made when I was using my iPod to transport lots of movies and photos for a project was to NOT make any music changes during that busy two week period.

Operating system message: No such file or directory in DMS while archivng.

Dear Team,
While i am trying to make the archiving i am getting the error "
Operating system message: No such file or directory" in DMS. I cross checked all the forums and made the settings as suggested still i am not able to resolve this. In fact it is working fine in my development system but not executing in Quality server.
Please do the needful.
Regards,
Banu

Hi Bhanu,
Check with technical details like archive directory ,customising settings on sara . I think so u made transport archive setting TR into quality server ?. On some repository the changes won't happen with imported TR on target system. Please cross check and do manually on quality server. My guess problem with OAC0 , OACT .
Regards,
chandu

DB Restoration in different Operating system

Dear Experts,
In SAP supporting Database, which DB will allow the database backup that can be restored in different Operating System Platform.
Say for example: I will take a database backup on windows system and i want to restore the same in different OS other than windows.
BR,
Jai

Generally: Not supported.
Each operating system stores the data in different block sizes plus it may have different endianesses.
For Oracle there are various options:
- OOO (see Note 1508271 - Oracle to Oracle Online Migration - Triple-O)
- transportable tablepsaces (Note 1367451 - Oracle 10g: Transportable Database)
- standard R3load procedure (hetergoeneous sytem copy)
For all those migrations you need to have a certified migration consultant on-site (see http//service.sap.com/osdbmigration).
Markus

Operating system change

dear all,
right now we are using oracle 10gr1 in windows 2003 server.
now mgmt decided to change the operating system from windows to linux.
i can't simply take cold backup fro wins and restore on linux system bcoz both OS are different...
so kindly advice wht need to be done.

schavali wrote:
Migration of Oracle Database Instances Across OS Platforms (Doc ID 733205.1)
NorMen wrote:...
It's possible to migrate a database from windows to linux (x86) with rman because the byte order in both OS (in x86 architecture) is the same (little endian).As far I can tell, transportable database is a 10g*R2* new feature, at least it is mentioned as is in the 10gR2 New Features Guide :
http://download.oracle.com/docs/cd/B19306_01/server.102/b14214/chapter1.htm#OBJECTIVENO04065
So, for the OP working on 10g*R1* only expdp/impdp or transportable tablespaces are an option.
Nicolas.

No Transport request in Virtual system

Hi,
I have setup the STMS , where we do not have production server hence i have used virtual system.
All Transport request moved from Dev to Quality which appears fine the queue of QAS Server, but not appearing in Production Server which is virtaul.
kindly advise.
Thanks you
irfan.

Hi,,
We do not have any QA Approval procedure, but all requests are assigned to one project.
Seconldy i went into the Tcode SE01 entered the released transport number but i could not see any such logs which says waiting for QA approval.
all it says is this..
Log Overview for DEVK900421
       DEVK900421              MM-Release Strategy
         DEV        System DEV
                    Checks at Operating System Level         14.09.2010 02:14:24    (0) Successfully Completed
                    Pre-Export Methods                       14.09.2010 02:14:27    (0) Successfully Completed
                    Export                                   14.09.2010 02:14:33    (0) Successfully Completed
             Import steps not specific to transport request
         QAS        Quality Server
                    Selection for Import                     14.09.2010 02:14:33    (0) Successfully Completed
                    -> Continue: Other Transport Ggroup      14.09.2010 14:53:51    (0) Successfully Completed
             Import steps not specific to transport request

On iOS 8 and "old" device for the operating system. О iOS 8 и "Старых" устройствах на этой операционной системе

USA.
Good day! I like you a fan of the forum users of APPLE. I live in the Russian Federation. Began his acquaintance with this company back in 2010 with the Ipad 2 device was still on ios 5. In January 2014 I made a gift and bought the iPhone 5s on OC IOS 7. I bought it at the official Russian official price that more accurately put Apple in 1100 $. In our country, it is a lot of money. With the money I could live for 3 months. In fact, I became the owner of a top (at the time) from a favorite device of Apple. My iPhone 5s worked perfectly on ios 7. sometimes met friezes light animation, and non-critical bugs, but who is without sin? Favorite company I was willing to forgive it because I see that she is trying to be better and not standing still. Looking WWDC presentation which provided us with iOS 8 you assured me that everything was better, faster, more functional. I was determined that update my iPhone 5s to iOS 8.0 ... APPLE releases new OC iOS 8 ... And I live! Behind the beautiful words that we said at the presentation of the great features of the new iOS hiding "something." And that "something" turned my phone in ... "pumpkin"! Yes! In that same stupid pumpkin! And now I will explain why I think it's pumpkin, not rose.
Sea bugs ... and they are awful and terrible as it does not give me the full extent of my work enjoy iPhone 5s!
Start from the beginning:
1 Streaming through technology "Air play".
"Air play" ceased to function properly! He was often disconnected from Apple tv and Apple airport express last generation. Apple tv 2g can not receive the signal from my iPhone 5s! And when it's all the same he gets a video playback does not last long, it just breaks and does not connect again! Helps to restart Apple TV and a hard reset by holding the button "HOME" button and "POWER". On the "Apple TV" is worth the latest firmware as these problems are manifested in the previous firmware of the device.
2 Built-in browser "Safari".
Tab in the "Safari" became constantly updated when I switch to another application or the other tabs! Apparent lack of memory (on iOS 7.1.2 with it all much better. At least when switching tabs does not re-update the previous tab).
Playing online video on non-optimized mobile site in the browser "Safari" really does not work! It is turned on and loaded almost to infinity! Sometimes just a black screen with an icon "Play" to be pressed at least 100 times, and the result is 0!
Scroll pages in the browser have become terribly sharp and smooth! on iOS 7.1.2 everything is fine, nice and smooth and no such bugs! Total confusion and thoughtfulness browser "Safari".
If the video still runs (for me equates to a miracle) then when rewinding the film is generally something strange ... Fast chooses how minutes and seconds I watch a movie (usually just starts playing from the beginning), or does not respond at all ... This is the same magic Apple? Unlikely.
3 multitasking menu (double-press "HOME").
Call multitasking (by double-clicking "HOME") began working with a delay, with a lag, c jerky animation, and sometimes even without it.
Control Center (which is called swipe upwards) was to slow down! Yes! That retard! Animation jumping shutter control center began play with tangible frame loss! If iPhone 5s under the control of OS iOS 7.1.2 everything happened smoothly, beautifully and dynamically in the iOS 8.0 it looks like on the iPhone 5 running iOS 7.C than strongly connected is not clear! Graphic differences from iOS iOS 7 8 almost equal to 0, and the speed of decline in almost 50%! How ?! Why ?! Why does my iPhone 5s become the iPhone 5 ?! This is an artificial slowing my device to increase the demand on the iPhone 6 or still glitch iOS 8.0 for iPhone 5s? Honey the company Apple, I really hope for the 2nd. Especially this shortfall fps animation curtain markedly if you open multitasking (acquired by double button "HOME") and call the control center and you'll see that the animation is playing choppy and not smooth! On IOS 7.1.2 this is not! Control center jumps smoothly and beautifully! On iOS 8.0 it happens all the time! Even if you turn off your favorite contacts and recent calls (I'm ashamed to say they thought) that appeared in iOS 8 (they are above programs on the multi-tasking) not solve the problem. As well, if you call the control center on the lock screen, then drop FPS will be very noticeable even to the untrained viewer (especially if you take two iPhone 5s one running iOS 7 and 8, the second on iOS and compare them on the forehead). If the Control Center click airdrop (air play) the animation of its appearance again played in spurts and not terribly nice and smoothly (especially noticeable on the lock screen and comparison of the forehead)! In a telephone call has been going absolutely shameless FPS drop a call center management and other activities!
And yes, for me it is a critical issue! I do not want the transition to iOS 9 my iPhone 5s turned to the iPhone 4 on iOS 7 (vid you all remember this terrible story?)! I want my iPhone 5s worked as smoothly as on iOS 7.1.2! Nor any justification for this inhibition iskuvsstvennoy I can not see! 8 beautiful iOS did not! graphic elements do not appear! So goes the Apple is doing this on purpose ?! We go down the list!
4 minor bugs that just break my brain and kill all the beauty of the use of "the best mobile operating system in the world"!
4.1. When a call comes in when you clicked the icon making a call the phone for about 2-3 seconds, vibrates and plays a melody. On iOS 7.1.2 ringtone and vibration stops as soon as you have accepted the challenge and in your ear does not play your ringtone by "imagine Dragons", cheeks beats you invented vibration in the style of "Tick-tonic."
4.2. When you look at the page on the Internet-phone terribly terribly strongly heated! A pair of piping hot! On iOS 7.1.2 is no such problem! Telephone hot, but not as much as on iOS 8.0!
4.3. Folder on the home screen opens with a delay of 0.5-1 second is the impact on the overall impression of iOS 8.0.
4.4. When you create a set (12 pieces) icons in one folder if dramatically open the folder and make swipe to the left then the following icons in this folder does not have time to boot up and are delayed by 1 second.
4.5. When you create a folder with 1-9 icons do if the above action fails then the animation (the same bug exists in iOS 7.1.2). It is very not nice aesthetically.
4.6. Scroll to your "Settings" felt terribly antsy. Although it is not only in the application "Settings" but also to the entire system and applications in general ...
4.7. Scroll to the Home screen has become less responsive to user actions all movements inogoda occur with jerky animation and some delay to the user.
4.8. Quite often, and without rational reason for going off the sensor device. That is, the screen does not respond to any user action! Helps pressing "HOME" or hard reset by holding the button "HOME" and "POWER".
4.9. Most people on the iPhone 5s lost communication with a mobile operator. Just go on and lost and because of this I have missed calls from their loved ones and friends (would cost you to be glad that I have not missed calls on business issues).
5.0. Many owners of iPhone 5s and iPhone 5 uhudzhenie complain about battery life. I honestly did not notice it, but we will not drop this off.
Outcome.
And now gets quite an interesting question, why? Why does my iPhone 5s began to slow? Why in the absence of graphical improvements are absolutely the same actions were reproduced with the loss of fps, slow down, lag, hover, fly? Why, if put next iPhone 5s on iOS 7.1.2 and exactly the same iPhone 5s on iOS 8.0 and pull the control panel to call multitasking bar, carry out all other actions I have described it on your device running iOS 7.1.2 it will work without any delays, lags, the deterioration in the responsiveness of the interface, reducing fps, and no departures from simple applications written directly by Apple? I see absolutely no any obstacles in the way to make the iPhone 5s to the operating system iOS 8.0 worked with the same smoothness, with the same responsiveness and speed as the iPhone 5s running iOS 7.1.2! I do not see what these restrictions are not!
There are many different bugs that I do not even remember now (as I write this text on emotions (positive) as able to roll back your iPhone 5s back to iOS 7.1.2, and he seemed to come alive with new life) and so far I have esteemed company APPLE does not eliminate these improvements do not, I will not go back to iOS 8.0! if the dispensation of these bugs, flaws, intentional degradation of the (almost identical in performance in comparison with the iPhone 6) IPhone 5s will not happen and the company APPLE will continue to apply to consumers of their products as a beta tester I will be forced to organize a petition and file a class action lawsuit in court not only in their own country (which is for the Russian Federation) but also in the United States and in other countries where people are just like me trying to deceive, mislead and force companies to buy new devices APPLE without having expressed any any more substantial explanation except as <iPhone 6 was 25% more powerful on with alignment with the iPhone 5s>!
P.s.
I hope Apple will still listen to their users and I also hope that it (Apple) still change his mind and will try in the near future to give users not-so-old devices (iPhone 5s, iPad Air, iPad mini Retina) and enjoy on all the new features of iOS 8 no lag, locked up, overheating, inhibited animation. Thank you for being there!
Ru.
Всем доброго времени суток! Я как и вы форумчане являюсь фанатом компании APPLE. Проживаю я в Российской Федерации. Начал свое знакомство с этой компанией в далеком 2010 году с устройства Ipad 2 тогда еще на ios 5. В январе 2014 я сделал себе подарок и купил iPhone 5s на OC IOS 7. Купил я его официально по официальной Российской цене которую выставила Apple точнее за 1100$. В нашей стране это очень большие деньги. На эти деньги я бы мог жить 3 месяца. По сути я стал обладателем топового (на тот момент) устройства от любимой компании Apple. Мой iPhone 5s прекрасно работал на ios 7. Иногда встречались легкие фризы анимации, и не критичные баги, но кто без греха? Любимой компании я был готов это простить так как вижу, что она старается быть лучше и не стоит на месте. Посмотрев презентацию WWDC на которой представили iOS 8 нас с вами уверяли, что все стало лучше, быстрее, функциональнее. Я твердо решил, что обновлю свой iPhone 5s до iOS 8.0... APPLE выпускает новую OC iOS 8... И я обновился! За красивыми словами, что нам говорили на презентации, за великолепными функциональными возможностями новой iOS скрывалось "нечто". И это "нечто" превратило мой телефон в... "тыкву"! Да! В ту самую тупую тыкву! И сейчас я объясню почему я думаю, что это тыква, а не роза.
Море багов... причем они ужасны и страшны так как не дают мне в полноценной мере насладится работой моего iPhone 5s!
Начнем по порядку:
1. Потоковая передача данных посредством технологии "Air play".
"Air play" перестал нормально работать! Он стал часто отсоединяться от Apple tv и Apple airport express последнего поколения. Apple tv 2g не может принять сигнал от моего iPhone 5s! А когда все же это у него получается то воспроизведение видео длится не долго оно просто обрывается и не дает подключиться повторно! Помогает перезагрузка Apple TV и жесткий сброс посредством удержания кнопки "HOME" и кнопки "POWER". На "Apple TV" стоит последняя прошивка так же эти проблемы проявлялись и на предыдущей прошивке устройства.
2. Встроенный в систему Браузер "Safari".
Вкладки в "Safari" стали постоянно обновляться когда я переключаюсь на другое приложение или на другие вкладки! Явная нехватка оперативной памяти (на iOS 7.1.2 с этим все гораздо лучше. по крайней мере при переключение вкладок не происходило повторное обновление предыдущей вкладки).
Воспроизведение онлайн видео на не оптимизированном для мобильных устройств сайте в браузере "Safari" толком не работает! Оно включается и загружается чуть ли не до бесконечности! Порой просто черный экран с иконкой "Play" на которою нажимай хоть 100 раз, а результата 0!
Пролистывание страниц в браузере стали до ужаса резкими и не плавными! на iOS 7.1.2 все прекрасно, плавно и красиво и таких багов нет! Общая заторможенность и задумчивость браузера "Safari".
Если видео все же запускается (что для меня приравнивается к чуду) то при перемотке фильма происходит вообще что-то непонятное... Перемотка сама выбирает с какой минуты и секунды мне смотреть фильм (чаще просто начинает воспроизводить все с самого начала) либо не реагирует вовсе... Эта та самая магия Apple? Непохоже.
3. Меню многозадачности (двойное нажатие кнопки "HOME").
Вызов многозадачности (посредством двойного нажатия кнопки "HOME") стал работать с задержкой, с лагом, c дерганой анимацией, а порой и вовсе без нее.
Центр управления (который вызывается свайпом снизу вверх) стал тормозить! Да! Именно тормозить! Анимация выпрыгивания шторки центра управления стала воспроизводиться с ощутимой потерей кадров! Если на iPhone 5s под управление OS iOS 7.1.2 все происходило плавно, красиво и динамично то в iOS 8.0 все выглядит как на iPhone 5 под управлением iOS 7.с чем это связанно решительно не понятно! Графические отличия iOS 7 от iOS 8 практически равны 0, а скорость работы сниженна практически на 50%! Как?! Почему?! Почему мой iPhone 5s стал iPhone 5?! Это искусственное замедление моего устройства для повышения спроса на iPhone 6 или все же недоработка iOS 8.0 для iPhone 5s? Дорогая компания Apple, я очень надеюсь на 2-е. Особенно эту нехватку fps в анимации шторки заметно если открыть многозадачность (посредством двойного нажития кнопки "HOME") и вызвать центр управления и вы увидите что анимация проигрывается рывками и не плавно! На IOS 7.1.2 такого нет! Центр управления выпрыгивает плавно и красиво! На iOS 8.0 это происходит постоянно! Даже если отключить избранные контакты и недавние вызовы (я грешным делом подумал на них) которые появились в iOS 8 (они находятся выше программ на панели многозадачности) проблему не решить. Так же, если вызвать центр управления на экране блокировки то падение FPS будет очень заметно даже для неподготовленного зрителя (особенно если взять два iPhone 5s один под управление iOS 7 и второй на iOS 8 и сравнить их в лоб). Если в центре управления нажать кнопку airdrop (air play) то анимация ее появления опять таки проиграется рывками и ужасно не красиво и не плавно (особенно заметно на экране блокировки и при сравнение в лоб)! При телефонном вызове происходит уже совсем уж бессовестное падение FPS при вызове центра управления и при других действиях!
И да, для меня это критичная проблема! Я не хочу чтобы при переходе на iOS 9 мой iPhone 5s превратился в iPhone 4 на iOS 7 (Вы видь все помните эту страшную историю?)! Я хочу чтобы мой iPhone 5s работал так же плавно как и на iOS 7.1.2! Ни каких оправданий для этой искувсственной заторможенности я не вижу! iOS 8 красивей не стала! графических элементов больше не появилось! Так выходит компания Apple делает это специально?! Идем дальше по списку!
4. мелкие баги которые просто разрывают мой мозг и убивают всю красоту использования "Самой лучшей мобильной операционной системы в мире"!
4.1. При входящем вызове когда вы нажали иконку принятия вызова телефон еще около 2-3 секунд вибрирует и проигрывает мелодию. На iOS 7.1.2 мелодия и вибрация останавливается как только вы приняли вызов и вам в ухо не играет ваш рингтон в исполнении "imagine Dragons", по щекам не бьет придуманная вами вибрации в стиле "Тик-тоник".
4.2. Когда смотришь страницы в интернете телефон ужасно-ужасно сильно греется! Парой обжигающе сильно! На iOS 7.1.2 такой проблемы нет! Телефон горячий, но не так сильно как на iOS 8.0!
4.3. Папки на домашнем экране открываются с задержкой в 0.5-1 секунду это сказывается на общем впечатлении от iOS 8.0.
4.4. При создании множества (12 штук) иконок в одной папке если резко открыть папку и сделать свайп влево то следующие иконки в этой папке не успевают загрузиться и отображаются с задержкой в 1 секунду.
4.5. При создании папки с 1-9 иконками если проделать описанное выше действие то произойдет сбой анимации (этот же баг есть и в iOS 7.1.2). Это крайне не приятно эстетически.
4.6. Пролистывание в приложении "Настройки" стало ужасно дерганым. Хотя не только в приложении "Настройки" но и по всей системе и в приложениях в целом...
4.7. Пролистывание на Домашнем экране стало менее отзывчивое на действия пользователя все движения иногода происходят с дерганой анимацией и какой-то задержкой на действия пользователя.
4.8. Довольно часто и без объяснимой причины происходит отключения сенсора устройства. То есть экран не реагирует ни на какие действия пользователя! Помогает нажатие кнопки "HOME" либо жесткий сброс посредством удержания кнопки "HOME" и "POWER".
4.9. Большинства людей на iPhone 5s пропадает связь с сотовым оператором. Просто берет и теряется и из за этого я уже пропускал звонки от своих близких и друзей (стоило бы вам порадоваться, что я не пропустил звонки по рабочим вопросам).
5.0. Многие обладатели iPhone 5s и iPhone 5 жалуются на ухуджение работы аккумулятора. Я честно говоря этого не заметил, но не будем сбрасывать этого со счетов.
Итог.
А теперь встает довольно интересный вопрос, почему? Почему мой iPhone 5s стал тормозить? Почему при отсутствии графических улучшений абсолютно одни и те же действия стали воспроизводится с потерей fps, тормозить, лагать, зависать, вылетать? Почему если положить рядом iPhone 5s на iOS 7.1.2 и точно такой же iPhone 5s на iOS 8.0 и вытянуть панель управление, вызвать панель многозадачности, провести все остальные действия описанные мною то на устройстве под управлением iOS 7.1.2 все будет работать без каких либо задержек, лагов, ухудшение в отзывчивости интерфейса, уменьшении fps и просто без вылетов из приложений написанных непосредственно компанией Apple? Я не вижу абсолютно ни каких преград в том чтобы сделать так чтобы iPhone 5s под управлением операционной системой iOS 8.0 работал с той же плавностью, с той же отзывчивостью и скоростью, что и iPhone 5s под управлением iOS 7.1.2! Не вижу от того, что этих ограничений нет!
Есть еще множество различных багов о которых я сейчас даже не вспомню (так как этот текст я пишу на эмоциях (положительных) так как смог откатить свой iPhone 5s обратно на iOS 7.1.2 и он как будто ожил новой жизнью) и пока глубокоуважаемая мною компания APPLE не устранит эти не доработки я не буду возвращаться обратно на iOS 8.0! если устроения этих багов, недоработок, умышленного ухудшения работы (практически одинакового по производительности в сравнении с iPhone 6) IPhone 5s не произойдет и компания APPLE будет и дальше относиться к потребителям своей продукции как к бета тестерам я буду вынужден организовать петицию и подать коллективный иск в суд не только в своей стране (коей является Российская Федерация) но и в США и в других странах где людей так же как и меня пытаются обмануть, ввести в заблуждение и заставить покупать новые устройства компании APPLE не дав на то ни каких более существенных объяснений кроме как < iPhone 6 стал на 25% мощнее по с равнению с iPhone 5s>!
P.s.
Я надеюсь компания Apple все еще прислушивается к своим пользователям и я так же надеюсь, что она (Apple) все же одумается и постарается в ближайшее время дать пользователям не таких уж и старых устройств (iPhone 5s, iPad Air, iPad mini Retina) наслаждаться и дальше всеми новыми возможностями операционной системы iOS 8 без лагов, подвисаний, перегревов, заторможенной анимации. Спасибо, что вы есть!

Agreed! This bug with the ringtone delay (№4.1) is really annoying

How do I clone a fully operational system that relies on Windows 7 for the underlying operating system?

I'm a retired IT professional desiring to assist a friend who owns a small business who recently experienced very malicious attacks on her computers from unknown parties operating anonymously on the Internet. Because
of her lack of preparation for such events, her future ability to continue to conduct her business was seriously threatened. The incident revealed, to my friend, the need to be prepared to deal with spontaneously occurring problems that create suspicious conditions
that arise with modern computer software before they can be analyzed in a sufficiently comprehensive manner to have an opinion regarding the appropriate course of action for obtaining a permanent remedy. In that, the ability to quickly react on the basis of
only suspicion is the goal.
I want to recommend an approach that involves maintaining an offline image of an operational system that is capable of running any of her computers. This image needs to include all of the software required to run
her business. In that, it is not limited to the operating system. This single image could then be used to restore any computer to a known reliable state should the need arise. This technique will also insure that each computer has sufficiently similar capability
to allow them to substitute for each other. Insofar as image restoration is itself an operation susceptible to causing unacceptable business delay I'm also recommending that each of the identical computers (i.e., from a hardware perspective) operate in a multi-boot
environment where a virtually offline backup can be instantiated via a simple reboot (i.e., an operation that all users of the Windows operating systems turn to when strange behavior is first observed). My intention is to limit the cloned system (i.e., partition
or C: drive) to the operational software. The business data along with storage for temporary data will be isolated on other partitions (i.e, mounted with other drive letters) accessible by each instance of the software eligible for multi-boot operation.
This kind of operation is something that I know how to setup on older versions of the Windows operating system. However, Microsoft has now dropped support for all of those operating systems and my much more limited
experience with the currently supported operating systems reveals that changes to the boot process will necessitate making changes to the specific preparations needed to build such an environment.
Before recommending that my friend replace all of her computers with new ones, that includes paying for new operating system (i.e., Windows) licenses, I need some assurance that the new operating systems are as
good as the old ones in this respect. These need to be relatively inexpensive desktop computers and we're only talking about a few of them. Let's say fewer than half a dozen. My friend is a sole proprietor and even though her business has become completely
dependent on what was once called personal computers she must operate on a fairly tight budget. This especially includes the budget for technology.
The articles I've been able to find on the Microsoft support websites seem to treat multi-boot as a situation where someone is running different versions of possibly difference operating systems whereas my need
to produce a single image that will both run on multiple computers as well as multiple partitions on the same computer. I'd appreciate finding some technical advice that applies to building such a system using a supported version of Windows.

I tried the image creation/restoration described by Jared. I don't think it makes much sense to rely on an operational system to do such a restoration therefore I opted for method 3 which involves using a "System Repair Disk". My first
reaction is what a crude tool. The image creation process had no trouble putting the image on a simple network share. However, it appeared as though the restoration couldn't even connect with the device. I then copied the files to a USB drive.
In this case the repair disk said it couldn't find the files even though they were there. It offered no mechanism to even look and see what was there. It appears as though it will only find the image if it is located in a folder by the certain
name used on creation and it is in root directory. Not very handy.
As ugly as all that was when we finally come to the point of making the restore it looks like the only option is to restore the entire disk, which in my case would mean also restoring both the windows partition and the recovery partition. This just
isn't what I want to do. It is also something I wouldn't even consider doing unless it was the only possible way to recover from a failed hard drive.
In summary, unless I've completely failed to notice how it works that just isn't going to work.
I hope there is something better than this. What about WinPE and ImageX?
Absent anything useful from Microsoft it will be necessary to try using other software. Time to try Acronis! I guess.

How do i install a free osx or operating system on my macbook pro 2008?

Hey so the go is i have a macbook pro 2008 i love it too bits but for some reason my screen flickers all the time but ill just have to deal with it. Secondly i cant install any operating systems because i dont have a mac to download osx from or mountain lion. And when i go to download it directly from my macbook pro it says i need to buy it :/ or i dont have the licence i cant remember but i just want it working whoever can help me i would much appreciate!! thankyou for reading this and also ps my screen when im on the net on it in the safari osx menu it intermittly spazzes and all the url bars keep clicking etc i dont know what the problem is but i would appreciate some advice or help! it is a good machiene quiet no damage looked after just got it given to me from a family member but i have had no luck so far

Jamesandmacbooks,
if by “free” you mean “gratis” (as opposed to, say, “open source”), then there’s only one version of OS X to date that’s gratis, namely Mavericks. You can only download Mavericks if you currently have Mac OS X 10.6.6 or later installed. If you’re still running Leopard (Mac OS X 10.5.something) on your 2008 MacBook Pro, then you’ll need to first purchase the white retail Snow Leopard DVD, install it on your MacBook Pro, and run Software Update to get it to 10.6.8, after which you can download Mavericks gratis from the Mac App Store and install that. Be sure that your MacBook Pro meets all of Mavericks’ system requirements before trying to install it. If you currently run any PowerPC apps, note that they won’t be supported in any version of OS X after Snow Leopard.

After bios update, will not boot, says install an operating system

I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.

jwess wrote:
I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.

Transport in differnet Operation System

Similar Messages

Maybe you are looking for