Transport infoobject data element?

Hi All,
I created a new key figure in the development system with numeric type and 3 decimal places. I transported it to the quality system. Everything went well.
After I changed the decimals places from 3 to 9 in the development system. I created a new Domain for this data type and assigned to the key figure. When I transport the key figure again only the key figure changes in the quality system but the data element not!
I tried to transport the data element itself but I do not know how can I transport it.
How can I solve the problem and synchronize the systems?
Thanks in advance,
Dezso

Hi Sergio,
I have created a new data element for my key figure on the basis of another (source) data element.
My new data element: /BIC/OIZINPRATE9 (9 dec)
The source data element: /BIC/OIZINP_RATE (3 dec)
Hope it become clearer
Regards,
Dezso

Similar Messages

  • CO-PA transport error, data element missing

    We had a error when transporting CO-PA to Q&A because one of the value fields data elements doesn't have a object directory entry (package) assigned, and wasn't included in the transport.RKE2_VV016 doesn't have one, RKE2_VV015 has it, and don't know why this happened.
    Any clue on how to generate the directory entry?
    Thank you

    Table buffer for TADIR wasn't consistent with the SQL content. Strange. Refreshed the table buffer and the transport was correctly generated.

  • Data element could not be created- error mesaage

    hi all,
    we are getting some wierd error when transporting to quality system. The transport for satrasfer structure datasource etc fails. The transfer structure does not get activated and we get following error message:
    DD_DTEL_PUT: Act. parameter ROLLNAME=<space> invalid
    DD_DTEL_PUT: Act. parameter ROLLNAME=<space> invalid
    Data element for InfoObject BELNR 0DOC_NUM could not be created
    Data element for InfoObject BELNR 0DOC_NUM could not be created
    if you check the infoobjects data element it is active in that system. And this is not getting solved even if you recollect the trasfer structure and transport it. We have to ask for reimport. But we dont understand why is this happening. We have got this error 4-5 times and only in this system.
    Please suggest how to resolve this. if any setting or basis related configuration is missing or what could be issue.
    Any help will be rewarded by points.
    Thanks and Regards

    Hi ,
    The problem is probably with the number range for transferstructure data elements.
    Number range objects are maintained with transaction SNUM. BI_TSDTEL is
    used for naming of transferstructure dataelements. The status must    
    always be bigger than the highest transferstructure dataelement number.
    Please refer to the notes 1009638 and 674818 for further information.
    Best Regards,
    Des.

  • Error: Data element for InfoObject AUFNR 0PM_ORDER could not be created(QA)

    Hi Experts,
    I am trying to Transport a request from DEV to QA,which consists Transaction Infosources,  afetr the inport the TR is failed with return code 8. and the error message in the log is as follows.....
    Error when determining a number from object BI_TSDTEL and number 01  
    Object name can only contain characters from syntactical character set
    Data element for InfoObject AUFNR 0PM_ORDER could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
    Data element for InfoObject TXTMD could not be created
    Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
    please Could anyone give the Inputs to solve this , I'll be greatful to you.
    Thanks & regards
    SK

    hello AJ,
    Till now the problem is not solved , Please provide some inputs.
    here I'm getting this problem for TXTMD, 0CO_AREA, 0PM_ORDER, 0DATE, 0PLANT, 0ORDER_CURR, 0LOC_CURRCY
    Error when determining a number from object BI_TSDTEL and number 01
    Object name can only contain characters from syntactical character set
    Object name can only contain characters from syntactical character set
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Transfer structure 0CO_OM_NTW_1_SB activated under the name 0CO_OM_NTW_1_SA
    It is not necessary to copy dependent objects for transfer structure 0CO_OM_NTW_1_SA
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Activating Transfer Rules 0CO_OM_NTW_1_SA ...
    23 Transfer Rule(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
    23 InfoObject(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
    Formulas have been saved
    PLEASE PROVIDE SOME INPUTS.........
    Message was edited by:
            S K

  • Transport master data infoobjects

    What will be the steps to transport master data in BI 7? I have transported relevant R/3 data source and then replicated data source in BW. Then I start collecting BW info objects for the master data. When collecting BW info objects for transport, do I need include data source, transfer rule and info pacakges? If so, why do I need to collect data source again in BW system as it has already been replicated from the source system?

    hi,
    Dont transport master data differently.
    If you are transporting standard cubes...Pls see the following steps....
    1.Source system assignment.
    2.Conversion(Source system ....Target system)
    3.Grouping data flow BEFORE
    4.Collection mode AUTOMATICALLY
    5.display LIST
    6.Drag and drop your Infoprovider.(Check infocube objects are selected properly or not...by default it will check
    all the related objects)
    7.Click on package...
    Note:Check all infoobjects.....by default it will check some objects only....
    hope it will solve your problem.

  • Attaching Zdomain to Keyfigures Data Element

    Hi All,
    I have craeted Z Data Domain as per my requirements in developement server.
    I attached this domain to the Data Element craeted for Infoobject by deleteing the std one.
    I have transported both the Keyfigure and domain to Quality server.
    But in quality server these changes are not getting reflected.
    Yet the Data Element for Keyfigure is displaying the std one instead of the Z domain.
    Please suggest me what can be done to attach Zdomain to key figures Data Element and this has to get reflected in quality server .
    Thanks,
    Swati
    Edited by: Swati Pardeshi on Aug 21, 2008 12:39 PM

    Hi Hanni,
    Welcome to forum.
    Try to attach key word VALUE CHECK to your PARAMETER statement.
    I.e:
    PARAMETERS test TYPE ZDATA_ELEMENT_TEST VALUE CHECK.
    Note: The addition VALUE CHECK cannot be used together with the additions AS CHECKBOX, RADIOBUTTON, or NO-DISPLAY.
    Regards,

  • How to make BI Info obj Data element in-herit source DE documntn?

    Say I am in ECC. I go to SE11, give table name MARA and then doubleclick on the dataelement 'MATNR'. Then I click on documentation. I get a popup with Short text " Material Number" and Definition "Alphanumeric key uniquely identifying the material'.
    I am interested in the latter information that is 'Definition' - & in general whatever documentation comes up for data element in ECC.CRM.SCM,SRM.
    Now I log into SAP BI. I find that under characteristic 0Material, the data element is /BI0/oimaterial. When I double-click this datamaterial and press the documentation button, the system says 'No documentation'.
    My Questions:
    1. IS there a switch we could turn on in source ECC/SRM/CRM/SRM so that the data element in SAP BI inherits the original source field data element documentation.
    { I am not too convinced of the argument- that in BI we have info objects in ECC we have fields - since I am talking of data element level information- I would tend to think of this as an oversight of the designers or de-prioritization !!}.
    2. Could we have an ABAP workaround? That is, in BI we identify the tables that house the mapping between the source and destination data elementsa and take out this information. Then we extract the dataelement documentation by function DOCU_GET (from eCC) and use the mapping info above to link SAP BI data element with source data element documentation.
    WHY do I want to punish myself as above? My use case is, we take out SAP BI Table, field, metadata etc and create a model in a modeling tool and physical implementation in a 3rd party DW database as our own canonical, application-agnostic corporate datawarehouse. I would want the source data element documentation to flow to this last system as well as the modeling tool.
    Regards
    Sasanka

    That is, in BI we identify the tables that house the mapping between the source and destination data elementsa and take out this information. Then we extract the dataelement documentation by function DOCU_GET (from eCC) and use the mapping info above to link SAP BI data element with source data element documentation.
    1) SAP don't supply this, I would imagine, because R/3 isn't the only possible source of data.  I'm currently working on an app that extracts from R/3, an Oracle database and APO.  From whence should I take the documentation for my MATERIAL info object?  While being able to transfer the documentation of data elements might be very useful for your app, I can't see that generally it would be of interest to clients - I've certainly never heard of such a requirement.  So, my opinion at least, it isn't a design flaw.
    2) As you've pointed out, you can get the tables that do the mapping, so you know the source data elements, so you can get the documentation.  I'm not sure of how to store the documentation, but the obvious candidate for a link between infoobject and dataelement would be master data of an own infoobject.  You could wrap DOCU_GET in an RFC (if it isn't RFC enabled), and do a direct call between your 3rd party app and r/3 to get the documentation.  For information about the mapping tables, I'd suggest asking that question specifically in one of the BI forums.
    matt

  • How to add a new data element?

    friends,
         the data elements for the fields ECSRATE and orig_ecsrate in the structure j_1iexitem is different in our development and production systems...the correct one is j_1iexecsrat, which is in development...how to change the data element of this field in the production system..thanks all.

    Hi,
    Kindly check the transport requests for the structure in both DEV & PRD.
    Utilities -> Versions -> Version Management.
    Kindly check the transport request in the DEV against the "activ" checked.
    Look for the same request number in the PRD for the structure.
    If there is a mismatch, kindly transport the request in DEV to PRD.
    You cannot directly change the data elements in PRD system.
    It should be done through the transport requests from DEV to PRD.
    Hope this helps!
    best regards,
    Thangesh

  • How to deal with the change of data element?

    Hi, experts
    My trouble's background is:
    A CBO table(ZIEBTCIITM) saves invoice items .
    There are three fields relevant to quantity in it.
    And they have the corresponding data elements with the same type QUAN,13 characters and 3 decimals.
    Now because the quantity is so small,for example 0.00004,that the 3 decimal digit is not suitable.
    I want to change the CBO table to adapt my business,so the quantity fields' decimal should be expanded firstly,and there are transction data in the CBO table.
    My question is :
    1) Is it necessary to backup the CBO table before data element change?
    2) What should I do is Only to expand the data elements' decimals?
    Anyone can give me suggestion?

    Hello Mic
    To be on the save side I would suggest to export the table entries to Excel and create a transport request containing the original table and its entries:
    R3TR TABL ZIEBTCIITM
    R3TR TABU ZIEBTCIITM *
    Next you should create your own data element (or search for a suitable standard data element), e.g. ZQUAN13_5 (13 digits, 5 decimals).
    Replace the data element of the DB fields with your new data element and activate the DB table.
    I expect that nothing will happen to the entries in the DB table except that your quantity fields should have 5 decimals now.
    Regards
      Uwe

  • Problem transporting the text element translated into Korean language

    Hi guys,
    I have created a new data element for the program and make a Korean translation for the new data element.
    However, upon transport only the new data element in English language is transported to the QA box, the Korean translation was not.
    Did I miss something in my transport request? Or have I done something worng?
    Thanks a lot!
    Regards,
    Mark

    Hi Mark,
    You need to create the separate transport for the translations which SAP will create for you once you do all the steps as I told.
    Once you give all the details as told, just press EDIT button by choosing correct language.
    Regards,
    Atish
    Edited by: Atish Sarda on May 29, 2008 12:32 PM

  • Data elements in multiple language

    Hello SDNites,
    I have some 300 data elements and all these data elements have to be maintained in 13 different languages. Can someone please suggest me the best way to do the same?
    As per my approach, go to table DD04T, maintain the entries over there in different languages and explicitly attach this table in transport request. Suggest me is this the right approach?
    Regards,
    Abhi

    Hi!
    Try to look at this FM RPY_DATAELEMENT_UPDATE
    Maybe you can quickly create a program that implement it and update all the texts you need.

  • How to bring a custom data element into another ods object

    I have an ods object which has a custom data element called customer purchase order number. I have another ods object which needs that custom data element. Both these ods objects are part of a multiprovider. How do I make the customer purchase order number available in the 2nd ods object? We are in SAP BW 3.5
    Thanks
    Ram

    Hi Ramgopal,
    as suggested by experts, create or use the custom infoobject.
    go to change mode of ODS (2nd ODS) add custom infoobject into data or key fields (similar to 1st ODS), then update rules od 2nd ODS will be deactivated. go to change mode of update rules and map with the infoobjects which feeds dat to custom infoobject (similar to 1st ODS)
    if routine is used to populate data copy and paste same routine and check routine and activate.
    Hope this helps.
    Regards,
    Daya Sagar

  • Data element problem

    Hi Experts
           I have used EBELN domain for my field, its length is 10,
          now i want to increase the length of the data element, what can i do.
          can i change the data element to the field ebeln.
          If i change it, will it affects the data in the production server which already transported to production.
    Pls advise me on this same.

    hi,
    You cant change directly.It will ask Access Key.
    changing SAP standard data element is so critical and it will never give the result you expected.
    Because so many tables and programs use ebeln and do some validations on field size also.
    Its like playing with standard programs.
    Please do in other way like creating zebeln in se11 tcode and give size according to your requirement and use this for your field.
    Reward if useful
    Thanks
    Sivaparvathi
    null

  • Help regarding data element

    I need some help regarding data element ZEXPDT.  I used it in an infoquery that was transported to QAS and it does not exist in QAS.  I thought it might be locked in a transport, but the below screen clip says it is not locked.  It was created in 3/2014.  Thanks.

    Either trick the system, SE11, add a space at end of text desciption and save,
    Or call transport workbench (SE01, SE10) create a transport request or use an existing one, then double-click on a task, switch to modify mode, add a line with R3TR DTEL name of the data element, save, then object list, lock in request/task menu.
    Or SE80, contextual menu of data element. (other functions, write transport entry)
    Regards,
    Raymond

  • Data element was activated (error in the dependencies)

    Hello Friends,
    We had released some TR yesterday to move to Quality and this was not moved successfully and in the TR logs I found the following message. Not sure what to do...request if some has encountered similar situation to give their feedback.
    We had similar problem 2 days ago with another TR failing for the same reasons for another Data element...both are mentioned below...
    We have adjusted the table in SE14 also but still the same. In development box we do not have any issues everything is active.
    We have also regenerated the table maintenance also.
    Following objects not activated/deleted or activated/deleted w. warning:
    Table YAR_CN_BS_ACT could not be activated
    (E- Nametab for table YAR_CN_BS_ACT cannot be generated )
    Data Element ZLINE was activated (error in the dependencies)
    Data Element ZZSERIAL was activated (error in the dependencies)
    Following objects not activated/deleted or activated/deleted w. warning:
    Table YAR_CN_GAAP_AREA could not be activated
    (E- Nametab for table YAR_CN_GAAP_AREA cannot be generated )
    Data Element ZZDES was activated (error in the dependencies)

    Ramesh,
    When you transport a custom object, you need to make available other dependent custom objects for that object in the target system, means that when you transport a custom table you need to take all custom domains, data elements also in the TR if they are not already existing in the target system.....
    Pls check that in your respective TRs, do you have data elements ZLINE, ZZSERIAL also....same for ZZDES...., Also include their domains if they are custom. Now, to remove this error, create a new TR and include all these custom data elements in it and transport to Quality. After that re-import your erroneous transports in Quality with help of basis.
    BR,
    Diwakar

Maybe you are looking for