Transport jump ahead during streaming

I am using Quicktime pro and cannot get the transport to jump ahead in a streaming movie.  I cannot drag it or manually enter a time to go to.  It works in a movie residing on my hard drive, but not streaming.  Is Quicktime capable of this or is it a streaming limitation?

Same problem, keeps losing connection when in home sharing playing music and reverts to main menu so to get your music back you have to go back through the menu to start music up again.
Yet when not home sharing I can stream music from my iTunes library by selecting Appletv under speakers and it never loses the connection.
So there must be a problem with home sharing that causes the signal to drop out randomly.

Similar Messages

  • Pausing or jumping ahead while streaming

    iBook G3 Mac OS X (10.4.8) Verizon DSL with Airport
    I stream radio shows and I'd like to be able to skip ahead in the program, but iTunes can't seem to do that.
    Is there a way to open radio streams without iTunes?
    Or can I adjust iTunes so that it will skip ahead?

    Shadyh,
    Think of a radio stream as a live broadcast.
    You can't skip ahead unless you build yourself some sort of time machine!
    Perhaps the radio shows you listen to are also available in the form of Podcasts?
    Alternatively you could use something like Audiocorder or Audio Hijack to record your radio shows for listening to at a later time.
    That would give you the ability to skip ahead.

  • Lose Network even during streaming!

    OK, so I have 2 brand new ATVs (Canadian version if that matters). Linksys WRT160N router. Not only do I have to reset my wireless every morning on the ATV- but during streaming from my Mac's iTunes (which I turned off all power saving except for the screen)- it will still loose connection- and go back to the main screen. This is frustrating as my Wii nor my Samsung BluRay ever do this over wifi. It has to be something ATV related unless someone else has an idea.
    Another odd thing- one ATV will see around 10 wireless routers in my neightbourhood and the other will only see mine- they are about 100 feet apart on the same floor. I even did a reset and it didn't solve anything.
    I think the ATV needs a fix to keep a persistant connection and also not freak out if it does get a minor disconnect (which is annoying as it will just jump back to the main menu).
    ***** having a 1.0 device sometimes.
    Still love the bugger though- what an awesome device when it is running (minus some obvious updates that will be needed like saving favorites in the various modules)

    Same problem, keeps losing connection when in home sharing playing music and reverts to main menu so to get your music back you have to go back through the menu to start music up again.
    Yet when not home sharing I can stream music from my iTunes library by selecting Appletv under speakers and it never loses the connection.
    So there must be a problem with home sharing that causes the signal to drop out randomly.

  • Advice on Apple TV Pausing During Streaming (Apple Remote App too)

    With all the talk and excitement of the new Apple TV, I'm not sure if this problem applies. I'm not sure if the new Apple TV streams movies like the old one did.
    Regardless, I have had some difficulty with my 40GB Apple TV that I finally figured out after months. I'll describe my network, describe the problem and solution, and why that solution works.
    1. My network.
    I have:
    an iMac connected wirelessly to an Airport Extreme
    a Western Digital hard drive connected via ethernet to my Extreme. My movie library is here
    an newer airport express (N) connected to my stereo on the main floor
    an older airport express (G) connected in the basement with my XBOX connected to it via ethernet
    an Apple TV in the basement.
    2. The problem
    When I'm streaming movies, it often works just fine. However, sometimes, during a movie, the playback pauses as if Apple TV needs to re-cache the movie or something. It will pause for about 10 seconds or so then keep playing. When it starts to play again, the movie jumps forward the 10 seconds to the current playing point. This then works for anywhere from another 30 seconds to several minutes. When this pausing occurs, if you click the Apple remote to bring up the status bar, you can see the timeline of the movie continue to move along. Then, other times, the whole thing will somehow cure itself and start working again.
    Unrelated but later found to be related problem with Apple remote on iPod touch
    Sometimes, trying to connect to my iTunes library, it couldn't connect and I'd get the message that my firewall is getting in the way. You'll see as it turns out, this isn't the problem.
    How I found the solution
    When this pausing occured, I would unplug the Airport Express in the basement. This is the one the XBOX is connected to. After a couple of seconds, I'd plug it back in. On the TV screen, it would revert back to the movie list and show that there were no movies to play. Then, after a couple of seconds, my movie list would reappear. I'd restart my movie and it would work just fine.
    Here's what was happening
    Somehow, I configured my Airport Express router in the basement to be an extention of the network The problem is that the Express in the basement was G speed and not N speed (I think that was the problem). Sometimes, Apple TV would connect to the Express router in the basement rather than my Airport Extreme router upstairs. When this happened, the pausing during streaming would occur. This also makes sense now that the movie list would briefly disappear when I'd unplug my Airport Express in the basement. The connection would be lost but then a few seconds later, Apple TV would find Airport Extreme and reconnect. Then it would work perfectly.
    I also noticed two separate networks coming up when I did a network scan. I would fire up my WIndows laptop and do a network search. I would get two separate instances of 'Mynet'. One would be N speed and the other would be G speed. This now also makes sense since one of them was my Express and the other was my Extreme.
    The solution
    I did two things. I swapped the two Express routers so I had the N speed router in the basement connected to the XBOX. I also configured the network so it was 'all the same network'. Now, when I do a network scan on my Windows laptop, I no longer get the two separate instances of 'Mynet' coming up.
    Since then, I have never had a problem streaming movies nor have I had a problem with my Apple Remote app on my iPod Touch.

    I'm having similar problem.
    My set up:
    iTunes running on my MacBook C2D, 2GB RAM
    Movie contents are in an external USB2.0 HDD (7200rpm) attached to Airport Extreme (802.11n)
    Typical movie content is mp4 file with 1.8mbps bitrate.
    When my MB is completely idling state, ATV gets data w/o pausing.
    When MB is doing some task (web browsing, etc), no problem.
    When iTunes starts downloading some video podcasts (to MB, not syncing to ATV).... the movie streamed to ATV gets paused and gets into the same state as gjbonnington described.
    Any idea how to solve??
    MB C2D (Black, 2GB RAM) Mac OS X (10.4.9)
    Powerbook G4 15 (1.33GHz, Combo Drive) Mac OS X (10.4.2)
    Powerbook G4 15 (1.33GHz, Combo Drive)   Mac OS X (10.4.2)  

  • I listen to podcast alot on my ipod recently something changed and I am no longer able to slide the progress bar forward to jump ahead. the bar has disappeared and I dont know how to get it back

    I use my Ipod touch to listen to podcast alot. Recently my screen changed somehow and I can no longer jump ahead thu the podcast by sliding the progress bar. The bar has disappeared

    No problem.  Glad to have helped!
    B-rock

  • Where do you capture Change Requests? I'd like to jump ahead 15 minutes or more in a FF

    With my DirecTV DV, I could jump 15 minute or greater increments with FF through a show or game.  I've read others posting about not being able to do this too.  Is there a future features list maintained anywhere?  Where do you capture changes requests and allocate them towards releases?  Is this a feature we will get anytime soon?

    You can set skip to be up to 5 minutes.
    There is also chaptering that you can use for a show that has completed recording.
    Start playback. Hit the up arrow key and you can jump ahead in the program.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Imported interactive SWF jumping ahead

    Hello,
    I imported a SWF into Captivate. The SWF is a mini-instructional module with it's own Next and Back buttons and its own menu of topics. The Captivate is a course I'm building. I had a developer create this SWF to prevent my having to produce every new concept on it's own slide (the project was getting waaaaayy too slide heavy).
    The problem is that the SWF works fine on it's own -- the SWF 'screens' don't advance until the user clicks the appropriate button on the SWF --- BUT when imported to Cp and previewed, the SWF's first screen jumps to the next screen without the user's input. Understand this is the SWF jumping ahead, not the Cp slide that it resides in. (when I imported the SWF, the thumbnail in the selection/dialogue box even jumped ahead)
    What gives? Can anyone tell us how to fix this?
    Thanks!

    Misnomer17 here...Ed, a Flash developer on staff, solved the problem! Here it is for all to reference:
    Problem:
    My flash swf that I imported into Captivate does not function properly. On the first frame of the timeline, I have a stop function that pauses the swf. I also have a button that allows the swf to continue playing when clicked until the next stop function occurs. However, when captivate plays this swf, the swf automatically skips and goes straight to the next stop function. How do I avoid this error?
    Solution:
    Captivate does not like the stop function on the main timeline of the Flash/swf.  In Flash, clear out the main timeline by placing all your items from the main timeline into another movie clip (including the action script).  Drag your new movie clip onto the main timeline. Export to swf. Test out your new swf in Captivate.

  • I rented a movie on apple tv, but during streaming, the voices of the actors is very quite while all other noises are normally to hear

    I rented a movie on apple tv, but during streaming, the voices of the actors is very quite while all other noises are normally to hear

    Hi vazandrew, thanks for your help, Ive just checked, both home sharings ie Apple TV and itunes on my laptop, and they were both on , but for the heck of it, I turned them off and back on again. I still have the same problem.
    Im looking in purchased films, am I looking in the right place ?
    Thanks

  • Songs play partway then jump ahead to next

    I just synced up my iphone and tried listening to music... each song that started playing got only partway in, then it skipped ahead to the next one. I've re-synced a couple of times, but problem persists. It plays a few seconds (maybe 20 seconds or so), then jumps ahead. I'm really not sure which version of iphone I have or where to look to find out

    You may not be interested in the shake to shuffle feature - it may be highly unwanted by you but is not highly unwanted by others, which is why there is an option to enable or enable this feature.
    Settings > iPod > Shake to Shuffle > On or Off, which should be Off by default.
    There is also a Sound Check and Volume Limit option at Settings > iPod, which may be highly unwanted by some but not by all.

  • Jump cuts during a footage import

    I got some jump cuts during a footage import (firewire) from a JVC camera (1280X720 HD): during import I saw short black frames; then I saw that, corresponding those point,s I had the jump cuts. It's quite strange, also because, on the camera monitor itself all seemed fine.
    The camera owner today tried importing same footage on a pinnacle software on a windows pc and all was fine there...
    What could it be the problem here?
    P.S. A month ago I imported a footage (720X576, so simple DV) from the same camera and all was fine

    Also, you might try a different camera or a deck, which might be more forgiving.
    I'm in the midst of ingesting a lot of old mini DV tapes…sometimes finding for some tapes the deck won't read properly but a camera will…and for others, the exact opposite.
    Russ

  • Transport  Error occurred during post-handling RS_AFTER_IMPORT for ISCS L

    Hi,
       We are moving cube 0IC_C03 of material stocks/movements
    from Dev to Quality and we are facing problem while transporting the Transfer Structure 2lis_03_BF. Other  two TS moved successfully.
    The transporting is failing with the below error:
       “Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L"
      We tried moving couple of times , still it was failing with the same error and even we tried to activate in Quality with the activate program .It say " there is no Transfer structure to activate.".
    BW system is  3.1 c with service pack 18.
    Your help greatly appreciated
    Thanks,
    Sudharani

    Hi there,
    Have you checked that DataSource is activated and replicated in your R3 Quality system? Check in BW for your source system if 2LIS_03_BF is there.
    Hope this helps,
    Regards,
    Carlos

  • How to transport Jump Queries (RRI) from DPW to QPW

    Hi,
    I need to transport the Jump Queries from D to Q.
    I have one sender Query and 2 Receiver Queries. I would like to transport them to Q. In the transport connect I can able to select the sender Query and The receiver Queries are not found.
    Please let me, If I transport my sender Query will the receiver Queries will be automatically transported.
    Regards,
    Reddy

    How have u been transporting all ur queries?
    Its the sameway how u generally transport queries but make sure u find all ur 3 queries with whats underlying beneath in the flow.
    In RSBBS open the assignment n on top ull see a Truck Icon - Collect & Transport.

  • Time goes back and jumps ahead

    We have approx 20 servers in our eDir tree. They are NW 6, SUSE 10,Windows 2008, and one Windows 2000. When I go into dsrepair on one of the NW 6 server and go into Time synchronization I can see that the time is not in sync. The time will jump back and forth between being -2 plus hours behind to +2 hours ahead. This is happening even on servers that do contain any replicas.

    If all of the other servers change by the same amount at the same time,
    I'd guess that "this" server (whichever you're on using ndsrepair) is the
    one changing time. Is this box correct with regard to time, and how is it
    getting its time synchronized? Is this a VM? If so, is the host reliable
    with regard to time? What kind of time setup (single/primary/secondary)
    do you have on the various systems?
    Good luck.
    If you find this post helpful and are logged into the web interface,
    show your appreciation and click on the star below...

  • CTI jumps frames during RAM Preview

    I find myself having to build a graphic opener with music for the first  time in AE. Needing to time elements to the music, I've discovered  something that probably has been happening since I've owned AE, but I've  never paid attention to til now. When previewing, my CTI moves forward  by jumping several frames at a time, instead of playing smoothly. This  makes timing to the music beat all but impossible, at least for me. Is  this a normal thing for AE?
    Here is a sample of what I'm talking about...
    http://www.creativeillusions.biz/AE_CTI/

    Yes, OpenGL is enabled, as well as hardware acceleration. Here are my system specs...
    Asus P6X58D Premium
    Core i7 950
    24GB RAM
    nVidia Quadro 4000 - driver version 267.24
    Windows 7 Premium 64bit
    System Drive - WD Caviar Black 500GB SATA
    2nd Drive(Pagefile, Previews) - WD Velociraptor 10K drive(600GB)
    Media Drive - 1GB RAID5 (4 - WD Caviar Black 500GB drive)
    Matrox MX02 Mini
    CS5 Production Premium
    I should mention that I have Nucleo Pro 3 running, but this happens as well with previews being handled by NP3, and with it disabled. The current driver from nVIDIA is 270.61. I guess I can try it out, but I don't like getting too far ahead of what Adobe has cleared.

  • Mac Mini 2011 Fan is Noisy During Streaming Video

    Mac mini 2011 2.3 GZ. When I watch Youtube streaming video fullscreen or video chat with someone on Skype, the fan kicks into high gear and gets really noisy. Fan gets to about 5200 rpm and CPU up to 75C. I don't get the heat or fan noise during avi/Quicktime/VLC playback, or an Skype, audio alone. I don't recall this on my 2009 Mac Mini. Is this normal?
    Only variable is an 8 gigabyte RAM upgrade.

    It's possible that hardware accelleration is not
    enable for Adobe Flash.  Right click on the You
    Tube window and check the Flash Player settings.

Maybe you are looking for