Transport logical database

Hello,
I have added a new field for de logical database 'DDF'.
I can´t transport this change.
I have transported the structure but not the selection view. So, I don`t have the new field transported.
Is it possible to transport new fields?
Thanks in advance.

Welcome to SCN.
It is not at all advisable to change/modify the standard logical databases as it may be used in several standard programs.
Instead use them in your report as it is and add the required functionality in the report itself.
Still, if its require to change it then follow this SAP Link -
http://help.sap.com/saphelp_erp2005/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
Edited by: Amit Khare on Dec 15, 2008 11:18 PM

Similar Messages

Regarding Logical Database

Hi all,
      My problem is transporting Logical Database to Production server. first i have transported to quality server. in Quality Server it is working fine. But when i Transport to Production , 'Documentation Not exist ' erro r is coming.
        But i already create Documentation for logical database using se36.
       Is there any other reasons for not transporting to Production server.
Thanks,
Neptune.M

hi,
   is there any solutions for above problem?

Transporting Views created for Logical Database in QAS

Hello all,
Can anybody let me know teh steps...
How to transport views created for logical database from dev to QAS...
kindly give the steps...
thanks
saurabh

I don't think PNPCE does anything with HRP infotypes. PNPCE is all about PA data since PERNR is the main key. Logical DB PCH is the one that deals with HRP Infotypes.

Changes to View in logical database(SE36) is not saved in transport.!!

Hi ,
Logical Database: ADA
Selection view: CUS
We did few changes to the view for table fields ANLAV in SE36 .
When I press save, it is not asking for transport number.
How i can save these entries in transport? Do I need to manually place in the transport?
Kindly Suggest.
Thanks

Hi,
Please check below sdn link..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e0039a-0d79-2c10-0aaf-9f6c062c0ffb?quicklink=index&overridelayout=true
BR,
Vijay

Transport Request for logical database

Hi ,
Could you please advice how to create Transport Request when we made the changes to logical database ( added new filed to the logical database)
I have added payment term field to the logical database DDF, but Transport Request was not created for this change.
Please advise, we need to move this changes to other servers from development.
Thanks,
KSR

How did you change the standard LDB ?
Create a new reuqest in se09 and add this.
R3TR LDBA DDF

Transporting a logical database.

Hi,
Is it possible to transport a logical database across system?
If yes, how do we do it?
Thanks ,
Laxman

Hi,
It's like adding any other object,, from the Transport Management (SE10), under your request/task, add a new-entry on clicking sign, then search for 'Logical database' under object, and then put your LDB name.
with regards
Mahesh

Problem in KDF Logical Database !!

Hii Friends,
We need to modify Tcode F.42 and add a field Business Place(BUPLA) on Selection Screen. This is the main requirement.
So i make a copy of this program and KDF logical database.
I am adding a field BUPLA in ZKDF custom logical database. But this Business Place is not working, if i need to debug this logical database, I am unable to debug the logical database.
Please suggest your suggestions..
Nitin Garg

Hi Ramesh,
These are the type of error messages in exetnded syntax check:
The current ABAP command is obsolete
In the OO context either an INTO or an ASSIGNING specification or the addition
"TRANSPORTING NO FIELDS" must be used . be used. be used. be used. be used. be
used.
Internal Message Code: READ 018
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
      Program: Z_INT_I_PY_BONUSPAYMENT Include: Z_PY_F01_BONUSPAYMENT Row:    279
The current ABAP command is obsolete
At "LOOP AT itab" one of the additions "INTO", "ASSIGNING" or "TRANSPORTING NO
FIELDS" is required in the OO context . .
Internal Message Code: LOOP 012
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
      Program: Z_INT_I_PY_BONUSPAYMENT Include: Z_PY_F01_BONUSPAYMENT Row:    282
The current ABAP command is obsolete
In the OO context either an INTO or an ASSIGNING specification or the addition
"TRANSPORTING NO FIELDS" must be used . be used. be used. be used. be used. be
used.
Internal Message Code: READ 018
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
      Program: Z_INT_I_PY_BONUSPAYMENT Include: Z_PY_F01_BONUSPAYMENT Row:    282
The current ABAP command is obsolete
At "LOOP AT itab" one of the additions "INTO", "ASSIGNING" or "TRANSPORTING NO
FIELDS" is required in the OO context . .
Internal Message Code: LOOP 012
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
Please suggest me some way to clear these if it is possible.

Problem in Using Logical Database PNP

Hi Guru's,
I am using PNP logical database and rp_provide_from_last
macros statements to fetch data from PA Tables.
When i am doing extended syntax check it is showing more
than 60 error's in ECC 6.0 for below statements:
      1) Tables: Pernr
      2) Infotypes: 0001,0002. and
      3) RP_PROVIDE_FROM_LAST statements.
Could any please provide soloution how to clear all these.
Its very urgent.
Thanks in advance.
Regards,
Sunil

Hi Ramesh,
These are the type of error messages in exetnded syntax check:
The current ABAP command is obsolete
In the OO context either an INTO or an ASSIGNING specification or the addition
"TRANSPORTING NO FIELDS" must be used . be used. be used. be used. be used. be
used.
Internal Message Code: READ 018
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
      Program: Z_INT_I_PY_BONUSPAYMENT Include: Z_PY_F01_BONUSPAYMENT Row:    279
The current ABAP command is obsolete
At "LOOP AT itab" one of the additions "INTO", "ASSIGNING" or "TRANSPORTING NO
FIELDS" is required in the OO context . .
Internal Message Code: LOOP 012
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
      Program: Z_INT_I_PY_BONUSPAYMENT Include: Z_PY_F01_BONUSPAYMENT Row:    282
The current ABAP command is obsolete
In the OO context either an INTO or an ASSIGNING specification or the addition
"TRANSPORTING NO FIELDS" must be used . be used. be used. be used. be used. be
used.
Internal Message Code: READ 018
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
      Program: Z_INT_I_PY_BONUSPAYMENT Include: Z_PY_F01_BONUSPAYMENT Row:    282
The current ABAP command is obsolete
At "LOOP AT itab" one of the additions "INTO", "ASSIGNING" or "TRANSPORTING NO
FIELDS" is required in the OO context . .
Internal Message Code: LOOP 012
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
Please suggest me some way to clear these if it is possible.

Copying logical database from one server to another

Hello All,
I have one logical database name as KDF in my test server which has become inconsistent due to some reason . In my live server tht logical database is consitent now what is the option to copy the same from my live server to test server .
If i copied will it work properly or is there any other solutions or options.
Thanks
Sunny

Hi Suny,
First of all, we cannot create a transport request in Prodcution server and then transport it to the Development Server.Else, it is the other way round,one can create a request in development,then transport it to Test and then to the Production server.
That is why I said that if the SAP standard LDB is disturbed in Development as well,then you will have to manually look in for the modifications between the Production and the Test Server,and change them in the developemt and then transport it to Test server and then Production.
Hence,the best solution is to manually check for the inconsistencies and modify in the development server and then transport.
The path for copying that you are following is correct anyways.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

How to retrieve logical database

Hello All,
I have tried to make some changes in standard logical database and now it has become inconsistent.
Is there any way to reset it to its original state??
Thanks,
Sunny

We have these two servers at present ie devlopment and production
i have made some modifications in development server and this ldb is currently inconsistent
our transport route is from dev to prod server
i havent touched production yet
the original fomat is in production server.
hope the scenario is clear with u
pls let me knw if u want further info
sunny

Logical Database in Abap Objects

Hi to All
I want do it a program report using a Logical Database.
Is this possible ??? But when I make a GET <node>, occurs the following error:
         "" Statement "ENDMETHOD" missing. ""
I'm doing the following:
CLASS MONFIN IMPLEMENTATION.
       METHOD TRAER_DATOS.
               GET VBRK.
       ENDMETHOD.
ENDCLASS.
Please, somebody tell me how I use the logical database in Abap Objects.
Thank you very much
Regards
Dario R.

Hi there
Logical databases whilst of "some use" are not really part of OO.
If you want to use a logical database in an abap OO program I would create a special class which just does the get data from your DB and pass this either at record or table level.
Techniques such as GET XXXX LATE aren't really part of any OO type of application since at Object Instantiation time you should be able to access ALL the attributes of that object.
As far as OO is concerned Logical databases are a throwback to "Dinosaur Technology".
Since however modules such as SD and FI are still heavily reliant on relational structures (i.e linked tables etc) then there is still some limited life in this stuff but for OO try and solve it by another method.
If you really must use this stuff in OO then do it via a FMOD call and save the data in a table which your method will pass back to your application program.
You can't issue a GET command directly in a method.
Cheers
Jimbo

Logical Database in Webdynpro

Hello,
I have a program in R/3 that is based on a logical database. I don't want to have to write the program all over again in Webdynpro.
Is there a way to use the logical database in Webdynpro for ABAP.

Basically WDA calls a FM and then the following help is a good starting point:
"Calling a Logical Database Using a Function Module"
http://help.sap.com/saphelp_nw04/helpdata/en/64/237f8cd43711d1950b0000e8353423/content.htm
Kindly close the thread and award appropriate a points to the answer given.
Sergio

Logical database in adhoc query

Hello All,
Can anyone tell me what is the logical database in adhoc query?

Hi
When you create a query , you have to select an infoset. Infoset can be considered as a source from which data is populated in the Query Fields.
Infosets are created from Transaction SQ02.
There can be four methods through which an Infoset can become a source of data:
1. Table join ( By joining two or more tables from Data dictionary)
example: Joining tables PA0001 and PA0006 on Pernr to get a one resultant dataset
2. Direct read of Basis Table ( Like PA0001 as a source for data in Infoset )
3. Logical Database ( A Pre-written Program by SAP that extract data from clusters, tables taking care of authorizations and validity periods)
Example : Logical database PNP, PNPCE (Concurrent Employement),PCH ( LDB for Personnel Development Data)
Custom Logical DBs can be created in T_Code SE-36.
4. Data Retrieval by a Program ( Custom code written by ABAP developers which will collect and process data) . This program has a corresponding Structure in data dictionary and the fields of this structure will be used in query)
Reward Points, if helpful.
Regards
Waseem Imran

LOGICAL DATABASE IN HR ABAP PRPGRAMMING

Hi Friends,
what is use of LOGICAL DATABASE IN HR ABAP PROGRAMMING
AND END-OF-SELECTION EVENT IN HR PROGRAMMING PROGRAMMING???
regards,
vijay.

hi
HR Logical Databases
In Human Resources (HR), the following logical databases can be used as a data source for HR InfoSets:
PNP (PNPCE)
PAP
PCH
By selecting a logical database, you determine the HR data that can be reported on using an InfoSet.
Logical Database PCH
This logical database generally enables you to report on all HR infotypes. However, you are advised not to use this logical database unless you want to report on Personnel Planning data.
Logical Database PNP (or PNPCE)
Use logical database PNP to report on HR master data. It is possible to use logical database PCH to access this data, but PNP meets such reporting requirements more quickly because it is best suited to the task of selecting persons.
Logical database PNP enables you to access HR master data and infotypes from Personnel Planning. For example, you have the following options:
Reporting on the costs, number of attendees booked, and instructor for a business event on which an employee is booked
Reporting on working time and planned compensation for a position that an employee occupies
Reporting on the validity and proficiency of a qualification that an employee fulfils
From a technical perspective, this means you can use PNP to report on all of the infotypes that exist for objects (infotype 1000) that have a direct relationship (infotype 1001) with the Person object.
The ability to access infotypes from Personnel Planning using logical database PNP is a special feature that you can only use in the context of SAP Query and Ad Hoc Query. You cannot use this functionality for ABAP reports you programmed yourself.
You can also use logical database PNP to report on data from Personnel Time Management (infotypes 2000 to 2999) and Payroll (special payroll infotypes for the USA and customer infotypes; for more information, access Customizing for the Human Resources Information System and see Payroll Results).
Logical Database PAP
Logical database PAP enables you to access data from Recruitment.
regards
navjot
reward if helpfull

Logical database and program selection filter

Hi experts ,
In my program i have to select pernr through logical database selection and payroll area through manual coding .
Could you tell me how to give the filter condition in program.I am using PNPCE Logical database .
Thank you.
Devika.

I guess you mean to modify the screen layout during AT SELECTION-SCREEN OUTPUT via
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
screen-active = 0.
MODIFY SCREEN.
ENDLOOP.
This does hides all screen elements but the screen is still displayed.

Transport logical database

Similar Messages

Maybe you are looking for