Transport Management For ME

Dear Experts,
Please explain me the process of transports in case of ME. i.e., how do do the changes in DEV and how we capture them and move to QA and PRD?
Once the changes are done in DEV do we export them as some .xxx file and then import the same in to QA and PRD???
Please explain,wating for your inputs.
Thanks and Regards,
Nash.

Avinash,
QA and PRD process for SAP ME is not based on transport mechanims. The changes are compiled to the new build of ME. Then QA uses this build to test the changes. Once verified, they allow the build to be sent to the customer (PRD phase).

Similar Messages

Transport Management - Tools comparision

Hi All,
We are looking for Advance features for SAP Change management. Particularly in the area of automated transport Sequencing and conflict management between transports.
Though CHARM supports sequencing, we need to have automated sequencing.
Object level comparison between transports, flagging of transports..
Checked the following tools:
CHARM u2013 SAP SOLUTION MANAGER
REV-TRAC (http://www.xrsc.com/)
TRANSPORT EXPRESS (http://www.basistechnologies.com/products--services/transport-express.aspx)
IWAVE TRANSPORT MANAGER FOR SAP (http://www.enigmatec.net/products_iWaveTransportManager.html)
Can Somebody who have worked on these tools provide comparison of these tools to CHARM
Regards,
Ramesh Ramagowni

Hi Ramesh,
II have used some of these tools before or evaluated some of them at some point or other though not for 3 or 4 years. Which one you select depends on a mixture of your requirements and budget.
For me the biggest benefits of a transport tool are in project mode when you have a very high number of transports, as opposed to production support mode.
In project mode a tool can automate the actual transportation thereby removing the reliance on the Basis team members. You want to be able to build in an approval process and have email notifications. Then the whole thing can just run in the background. Another essential feature required is to be able to identify object dependency and sequencing errors.
In my view Rev-Trac is the Rolls Royce of the tools. It offers the functionality described above and much more but it VERY expensive. When I looked at it last they had a very inflexible and expensive licensing model so if you had a huge landscape it would cost a lot.
Transport Express is less sophisticated but does the job for a project and is much cheaper. It has a simple license model - you license the production instance and can have as many test systems as you like in front of it.
CHARM I didn't look at for a long time but when I did it had none of the features I wanted and was very basic.
I do not know IWAVE and I do know that Realtech also have a product called "Transport Manager".
Regards
Steve

Need blogs for transport management at SOLMAN4.0SP11 and above

There are many blogs in this group but none of them is about transport management.
Please help provide some. Thanks a lot!
Best!

Hi,
Good Question...
Usually if the systems are connect to each other, the objects move from one system to other when the transports are released in background, That to depends on whether they have to be imported into the target system immediately or every 1hr(time frame) is defined by the basis team as per the requirement.
But if the systems are not connected, then after you release the transport request, the basis team will export the log/data files from the source system corresponding to the transport and import back to the target system. This is manual process and is similar to the automated process listed above.
Basis team uses from transaction to export and import these files..and i am not aware of them. Please get in touch with your basis team for the same.
Hope this helps
Regards
Shiva

Business Package for Transport Management System & Travel Mangement System

Hi,
Is there any <b>Business package</b> available for <b>"Transport Management System" and "Travel Mangement System"</b>?
Please provide some link, if it is available.
Thanks in advance.
Manish

Hi Manish,
travel management is part of the ESS business package. As far as transport management, if you are talking about TMS capabilities for moving object in the landscape, go to https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio and search for "transport" You will find a thirdparty package for this.
Good luck.
John

What are all the Standard Data targets&Data source for Transportation Manag

Hi,
What are all the Standard Data targets & Data source for Transportation Management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

OTM - supported methods for Cloning Transportation Management environments?

Does anyone know if there are currently any supported methods for cloning entire OTM environments?
OTM Admin Guide only mentions supported methods for Database-related objects, but nothing for Web or App tiers.
Oracle Support Note 549353.1 (over a year old) states:
You can not clone the OTM Software, you must run the full installer on your new instance.
You can, however, clone the database portion so that you can have the same data content. This is
documented in Note 1313815.1 Cloning Oracle Transportation Management Database Schemas.
Not sure the above still applies to current OTM release 6.3.1.
Thanks,
Paul S.

i'm very glad to read, from the article you referenced, that there's no performance hit. but that's only 1 of 2½ issues. i have some follow-up questions. perhaps we should take this to a forum instead of the knowledge base?
-what about prior issue #2 (securely wiping the drive)? is this easily and instantly doable? we'll ignore #3 (relying on microsoft gets ½ a point).
-with the encryption keys stored on the controller, doesn't using third-party encryption software mean the keys themselves aren't encrypted by a user pw, making it that much easier for someone with physical access to the drive to extract them from the firmware?
-if the controller is doing the encryption, why bother with bitlocker? is it so slightly-more-savvy-than-average joe can easily enable it, or so you don't have to write it into the firmware? (i'm being serious, not snarky--i'm a software developer myself.) personally, i'm dual-booting win7* and ubuntu 14, which means i need 2 separate encryption methods instead of just supplying my credentials at boot to decrypt the hd and then choosing which os to load.
-also, if i upgrade the windows os, ms requires the os volume to be decrypted first. this would obviously not be the case if windows was unaware that it was encrypted.
*last, what about those poor silly saps who are running win7 (or earlier)? i just read that win7 bitlocker doesn't support self-encrypting drives--it was an update as of win8. we're just out of luck? i realize you can't support everything, but win7 is still a ms-supported os, and it seems like a better service to (more of) your customers to enable full-disk encryption all the time.
thank you!

Transport Management System with Solution Manager

Dear all,
Do you know the function transport management system(TMS) with solution manager, I already search in SAP document but not found this function.
Do you know how to config solution manager for TMS and documents related with this function please guide for me!
Thanks all very much !

Hi,
Check this link.
https://websmp103.sap-ag.de/~sapdownload/011000358700000508502008E/ChangeRequestManagement.pdf
Hope this answers your questions.
Feel free to revert back.
-=-Ragu

Steps to take if BlackBerry is not shown as connected in Desktop Manager for Mac

Hello Community,
Here is a list of steps you should attempt to try and get your BlackBerry detected in Desktop Manager for Mac.
1. Make sure you're using the most up to date BlackBerry Desktop Software for Mac. Which is available to download at http://www.blackberry.com/desktop
2. If using a MacBook/MacBook Pro make sure the BlackBerry is plugged in the left USB port close to the screen. If using a iMac make sure you use the USB ports on the Mac and not a USB hub.
3. Make sure you're using a BlackBerry branded USB cord. (There are usb cords out there for charging only).
4. Make sure mass storage mode is enabled on your BlackBerry smartphone. KB Article.
5. Disable Media Transport Protocol on your BlackBerry smartphone. (Options>Memory)
6. Make sure your Mac OS X 10.6 is running in 32-bit mode. KB Article.
7. Make sure ALL other syncing software has been uninstalled and removed off your Mac. KB Article.
8. Perform a battery reset on your BlackBerry smartphone. KB Article.
9. Make sure your BlackBerry smartphone is not hour-glassing or have an application error appearing on the LCD screen. However if there is a JVM 507/513 error appearing on the BlackBerry the Desktop Manager for Mac will pick up the device and reload the software.
10. Make sure "Open using Rosetta" is not running/disabled on Mac OS X. KB Article.
I will be adding more tips and tricks to this post once I come across them.
Feel free to share with other community members and I always welcome suggestions and comments.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Hey burko74,
Do you have a media card in your BlackBerry? If so, do you get prompt for mass storage mode?
Also does the mac pick up the media card as a removable hard drive?
Have you tried to do a battery reset as well?
I look forward to your reply.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Transport Management in SOlution Manager

Hello All,
We are currently running a Conf. Room Pilot for our customer. As part of the CRP, the customer has created a new template project in Solman and have also a created a new sandbox as a copy of their production for the CRP where we have got full access.
The customer wants us to use SAP transport management functionality in Solman where all transports & changes made in the sandbox can be tracked and they can be moved to their production if required using solution manager.
Now customer doesnot want to configure ChaRM.
Two possiblities I see are
1. Create an IMG project in Sandbox system through Solution Manager and in the Sandbox systems' project activate CTS functionality. Give TR Create authorization to team members with restriction of assignment to CTS project only. (Dis-allow TR creation w/o CTS project assignment in Sandbox)
2. Activate Change Request Management (ChaRM ) in the template project with only CTS functionality (No other functionality of ChaRM is useful here). At the moment I am not sure if this will be allowed.
please let me know, how do I restrict creation of TR without assigning to CTS?
Regards,
Shyam

Any answer to this?

How to configure CTS+ for Solution Manager for XI 3.0

Hi ,
We are working on XI 3.0 SP 20 and Doing a file system based transport of .TPZ files. We observed that there is a possibilit of misssing the objects while tranporting. So we are planning to set CTS+ with our Solution Manager.
Question:
1. Can we configure CTS+ through the latest version of Solution Manager for XI 3.0 landscape?
If Yes .. How? If No... Why?
2. Is there any way to make the the transport automated like ABAP tranports.
If there is.... Please send the link or documents..
Thanks
Manoj

Hi Venkat,
Thank you for the Demo. The Demo gives me information about the CTS+ setup. I am looking for the compatability of CTS+ for XI 3.0.
We have Solution Manager 7.1 setup in place.
Please let us know if we can setup CTS+ on solution Manager (7.01 EHP1) and use it to transport XI 3.0 SP20 IR/ID objects across the XI landscape.
Regards,
Manoj

Setting up of Transports Management System in EP7.0

Hi Experts!!!!!
Can you please provide the documents or links for configuring the transport management system for EP 7.0 Systems.
Regards,
Vamshi.

Vamshi,
These could be helpful.
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctstms/bcctstms.pdf
Reward points for handy posts!
Cheers,
Sandeep

How to Configure Transport MAnagement system in CHARM

Hi
How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
Can any one tell me the detailed process? If you have any Configuration document please share it to me
Points will awarded for helpful answer
Thanks
Bhaskar

In a two system landscape is it necessary to make development the domain controller always?
No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
This is not recommended.
Regards,
Ashutosh

Transport management system in ABAP

Hello Abappers,
Could you please provide me with the guided procedure of how the transport management system in ABAP works?
Please explain it in detail.
Points will be rewarded for relevant answers.
Regards,
Mansi.

Hi,
Try these links...
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCTSTMS/BCCTSTMS.pdf
http://www.bayerbbs.de/fileadmin/user_upload/bbs_internet/pdf/brochures/Einkauf/TM3%20Broschre_en.pdf
Do Reward points if useful....
Regards
AK

Purchase Order determination Transportation management

Dear Gurus,
We are in process of analysing transportation management system.
Kindly let me know the process of how the system automatically determines the purchase order during Transfer in shipment cost seetlement transaction.
If we have multiple POs, then how system identify which PO to pick.
During maintaining of purchase data for transportation planning point, we maintain only few things, then how does system identify a particular PO.
Any help is appreciated.
Thanks.

Purchaser Activities
       1.      Choose Process Purchase Orders.
       2.      To create purchase orders manually (without a preceding document), choose Create.
                            a.      The system opens a new document in the change mode.
                            b.      You add any missing entries at header and item level.
       3.      To process an existing purchase order, you have the following options:
¡        In the worklist, choose the number of the purchase order you wish to look at.
¡        Use the search and choose the document from the search results.
       4.      In order to process header and item data, choose Change.
For example, you can use in the partner overview to transfer the preferred vendor to the purchase order.
       5.      Choose Check to determine whether entries still have to be made or changed in the purchase order.
A list shows any missing or incorrect entries.
       6.      In order to transfer the document to the vendor, choose Order.
                            a.      The system generates an output action.
                            b.      The system processes the output action and sends the document using a scheduled output report
You can read more at
http://help.sap.com/saphelp_srm30/helpdata/en/38/4cc5376848616ae10000009b38f889/content.htm
Hope this helps, Thanks

SAP APO Transportation Managment 5.0

Hi,
          I would like to know the the process to Implement Transportation and Planning 5.0 in SAP APO environment ,presently the client is using SD for transportation and distribution.
          If you could mail me implementation guide in regards to Transportation Managment it would help me a lot.
            Could u send me some links which will help me.I have refer to master Data sep-up and understood the process in help.sap.com.
Thanks
Partha

Dear Partha,
Pl. find the below link
http://help.sap.com/bp_scmv140/BBLibrary/documentation/S12_BB_ConfigGuideEN_DE.doc
This guide will show you basic configuration settings to be made in both the systems. Though it does not list all the configuration, but it is quite useful guide to begin with.
Regards
Sandeep Patil

Transport Management For ME

Similar Messages

Maybe you are looking for