Transport Management System with Solution Manager

Dear all,
Do you know the function transport management system(TMS) with solution manager, I already search in SAP document but not found this function.
Do you know how to config solution manager for TMS and documents related with this function please guide for me!
Thanks all very much !

Hi,
Check this link.
https://websmp103.sap-ag.de/~sapdownload/011000358700000508502008E/ChangeRequestManagement.pdf
Hope this answers your questions.
Feel free to revert back.
-=-Ragu

Similar Messages

  • Evaluation system with Solution manager

    has anyone added an evalaution system where a user who logged a support message can evaluate the Solution given, with Solution manager. Basically the same thing like SAP have. When you close a call you have to rank the messageeg in regards of qaulity of answer etc etc..,
    Anyone that might have any ideas how to do this, could you please give me some direction to how I can implement an evaluation system.
    I thought of having a URL added to confirmation message, where the user can click on to take him to some area where he could evalaute the message. This systems is then linked to Solution  manager so that I can report on these messages and the evealuation received for these support answers.
    I will appreciate any feedback and  any ideas would be most welcome to help me to get to a method of implementing such a evaluation system or developing such a system.

    Dear Johan,
    Firstly the kind of scenario that you are trying to implement is not possible via the standard configuration of Support Desk.
    What I can think of is probably creating an action while closing the message which generates a form for the user to be filled and saves the values into an custom table for questions based on evaluation of the solution.
    Later you can generate reports based on this table.
    Regards
    Amit

  • EWA on Non-ABAP System with Solution Manager EHP 1

    Hi Experts,
    We have recently updated our solution manager from SP Stack 16 to EHP1 (sp 18). we are now planning to set up EWA for non-abap components (EP 7.0). however, the only SAP note that i have been able to find is "976054 - Availability of EWA for Non ABAP components" but this is only limited up to SP 17. I have not been able to find any guides relating to EWA thru Solution Manager EHP1.
    I would greatly appreciate if anyone can refer any documents or SAP notes that would enable setting up EWA for non-abap components thru Solution Manager EHP1.
    We have also gone through the note 1332428, but we have'nt found it useful. We are still struggling to generate EWA report on Non-ABAP system.
    Looking forward to your kind help.
    Thanks and Regards,
    Sarthak Syal

    Hi Sarthak,
    Good!!
    Please do  the following:
    1) include the system in the Solution and scheduled the EWA session.Logical component should refer to the Non-ABAP System with no ABAP instance as relevant under the SID definition in SMSY-systems.
    2) Is the Non -ABAP ( assuming its java) has the Software component defined and is mentioned as relevant under the SID with the component name and type.
    3) Having said that SMD - Root cause Analysis functionality is configured-> check whether you are getting the Details for the Non-ABAP systems in the analysis Tabs of Root Cause Analysis.
    This should be good to go. Wait for the session to get completed.
    Thanks,
    Jagan

  • Integrating third party system with solution manger

    Dear All,
    How we can do integration between third patrty system and solution manager. As part of our implementation we have got some other application to be integrated with SAP . We have got ECC 6.0 and Solution manager.Can any one guide me how to do this,
    Thanks
    Hany

    Hi Pankaj,
    Yes this is possible.
    Create an RFC using SM37 transaction.
    Build the logic to retrieve the data.
    The 3rd party system also should have the necessary logic to be triggered once there is a call from RFC & get the primary keys based on which it will retrieve data & pass it to SAP.
    Best regards,
    Prashant

  • Add sap R/3 enterprise system in solution manager SLD

    Dear All
    Required solution manager configuration documents.
    We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
    And during the installation of solution manager I select u201CConfigure a Local SLD u201C
    Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
    Who to Configure SLD Bridge ( in SLD Server ) ?
    in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
    and how to Verify that my system is connected and working fine With SLD
    Please help me regarding u201C configuration solution manager u201C
    Regards
    Shahid

    Hi
    Visit for step by step details of Standard Configuration of Basic Settings
    http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
    http://www.wilsonmar.com/sap_solution_manager.htm
    /people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
    Regards
    Uday

  • Managing Transport Request with Solution Manager

    Hi Experts,
    Kindly advise what is the pros and cons of using Solution Manager to manage Transport Request in R3.
    Thanks,
    Chris

    You call transaction STMS on your Solution Manager. If you have          
    created a local transport domain, you have to delete it. Menu            
    Overview-> Systems-> Extras-> Delete TMS Configuration. Confirm the      
    popups. On the Popup: TMS:Include System in Transportdomain you can      
    change to "Other Configuration" (F6) (second button from left)           
    then select "include system to domain". Enter the application server     
    and system ID from your domain controller. After this your domain        
    controller get the information that a new system wants to be part of the 
    domain, then you have to activate this on the controller,                
    then the status changed.                                                 
    That should be all you have to do.                                                                               
    But the recommendation from SAP is that the system with the newest basis 
    should be the domain controller.

  • SAP NW 7.4 as java system sync with solution manager system 7.1 issue

    Dear all,
    I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
    For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
    Below are the activities completed:
    1) Through template installed I have rgeisterd the system into Solman SLD.
    2) Sync completed succfully exact product version is shwoing in solman SLD
    3) after that I have checked in SMSY and LMDB its showing prefectly
    4) But in SMSY its shwoing only under technical system,not showing product systems
    5) I have assigned in product system in LMDB
    Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
    I ma getting belwo error.
    No system found for this product/product instance
    Message no. SOLAR_SPROJECT110
    Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
    Advance Thanks

    Hi,
    re-check if the 7.4 system is correctly registered in the solman SLD system.
    Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
    Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
    Please note - SLD -> LMDB -> SMSY.
    So, if the first 2 don't have the correct information, you wont have much joy with smsy.
    Rgds
    Deepak

  • System Monitoring with Solution Manager Ehp1

    Hi,
    I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
    Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
    Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
    when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
    <SID>_RZ20_COLLECT
    <SID>_RZ20_ANALYZE
    I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
    <SID>_RZ20_COLLECT_123539Error when opening an RFC connection
    Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
    Error during remote call of SALC function: Error when opening an RFC connection
    Error during remote call of RFC1 function: Error when opening an RFC connection
    I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
    Please, Could you help me?
    Thanks and regards,
    Tomas.

    Tomas,
    I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system).  I downloaded the lates ccmsagent file from the market place based my target system configurations.
    Herewith attaching the logs while I'm trying to check the profile parameter.
    tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    ================================================================================
    ==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    ================================================================================
    ***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
    ***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
    ***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
    ***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
    ***WARNING: Unexpected parameter: dbs/io_buf_size =100000
    ***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
    ***WARNING: Unexpected parameter: rsau/selector1/class =35
    ***WARNING: Unexpected parameter: rsau/selector1/severity =2
    ***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
    ***ERROR: Size of shared memory pool 40 too small
    ================================================================
    SOLUTIONS: (1) Locate shared memory segments outside of pool 40
                   with parameters like: ipc/shm_psize_<key> =0
    SOLUTION: Increase size of shared memory pool 40
              with parameter: ipc/shm_psize_40 =1472000000
    Shared memory disposition overview
    ================================================================
    Shared memory pools
    Key:   10  Pool
                Size configured.....:   642000000 ( 612.3 MB)
                Size min. estimated.:   637597428 ( 608.1 MB)
                Advised Size........:   640000000 ( 610.4 MB)
    Key:   40  Pool for database buffers
                Size configured.....:  1048000000 ( 999.4 MB)
                Size min. estimated.:  1468229308 (1400.2 MB)
                Advised Size........:  1472000000 (1403.8 MB)
    Shared memories inside of pool 10
    Key:        1  Size:        2500 (   0.0 MB) System administration
    Key:        4  Size:      523648 (   0.5 MB) statistic area
    Key:        7  Size:       14838 (   0.0 MB) Update task administration
    Key:        8  Size:    67108964 (  64.0 MB) Paging buffer
    Key:        9  Size:   134217828 ( 128.0 MB) Roll buffer
    Key:       11  Size:      500000 (   0.5 MB) Factory calender buffer
    Key:       12  Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
    Key:       13  Size:   200500000 ( 191.2 MB) Alert Area
    Key:       16  Size:       22400 (   0.0 MB) Semaphore activity monitoring
    Key:       17  Size:     2672386 (   2.5 MB) Roll administration
    Key:       30  Size:       37888 (   0.0 MB) Taskhandler runtime admin.
    Key:       31  Size:     4806000 (   4.6 MB) Dispatcher request queue
    Key:       33  Size:    39936000 (  38.1 MB) Table buffer, part.buffering
    Key:       34  Size:    20480000 (  19.5 MB) Enqueue table
    Key:       51  Size:     3200000 (   3.1 MB) Extended memory admin.
    Key:       52  Size:       40000 (   0.0 MB) Message Server buffer
    Key:       54  Size:    20488192 (  19.5 MB) Export/Import buffer
    Key:       55  Size:        8192 (   0.0 MB) Spool local printer+joblist
    Key:       57  Size:     1048576 (   1.0 MB) Profilparameter in shared mem
    Key:       58  Size:        4096 (   0.0 MB) Enqueue ID for reset
    Key:       62  Size:    85983232 (  82.0 MB) Memory pipes
    Shared memories inside of pool 40
    Key:        2  Size:    31168040 (  29.7 MB) Disp. administration tables
    Key:        3  Size:   114048000 ( 108.8 MB) Disp. communication areas
    Key:        6  Size:  1064960000 (1015.6 MB) ABAP program buffer
    Key:       14  Size:    28600000 (  27.3 MB) Presentation buffer
    Key:       19  Size:    90000000 (  85.8 MB) Table-buffer
    Key:       42  Size:    13920992 (  13.3 MB) DB TTAB buffer
    Key:       43  Size:    43422392 (  41.4 MB) DB FTAB buffer
    Key:       44  Size:     8606392 (   8.2 MB) DB IREC buffer
    Key:       45  Size:     6558392 (   6.3 MB) DB short nametab buffer
    Key:       46  Size:       20480 (   0.0 MB) DB sync table
    Key:       47  Size:    13313024 (  12.7 MB) DB CUA buffer
    Key:       48  Size:      300000 (   0.3 MB) Number range buffer
    Key:       49  Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
    Shared memories outside of pools
    Key:       18  Size:     1792100 (   1.7 MB) Paging adminitration
    Key:       41  Size:    25010000 (  23.9 MB) DB statistics buffer
    Key:       63  Size:      409600 (   0.4 MB) ICMAN shared memory
    Key:       64  Size:     4202496 (   4.0 MB) Online Text Repository Buf.
    Key:       65  Size:     4202496 (   4.0 MB) Export/Import Shared Memory
    Key:     1002  Size:      400000 (   0.4 MB) Performance monitoring V01.0
    Key: 58900130  Size:        4096 (   0.0 MB) SCSA area
    Nr of operating system shared memory segments: 9
    Shared memory resource requirements estimated
    ================================================================
    Nr of shared memory descriptors required for
    Extended Memory Management (unnamed mapped file).: 64
    Total Nr of shared segments required.....:         73
    System-imposed number of shared memories.:       1000
    Shared memory segment size required min..: 1472000000 (1403.8 MB)
    System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
    Swap space requirements estimated
    ================================================
    Shared memory....................: 2050.4 MB
    ..in pool 10  608.1 MB,   99% used
    ..in pool 40  999.4 MB,  140% used !!
    ..not in pool:   34.4 MB
    Processes........................:  716.8 MB
    Extended Memory .................: 8192.0 MB
    Total, minimum requirement.......: 10959.2 MB
    Process local heaps, worst case..: 1907.3 MB
    Total, worst case requirement....: 12866.5 MB
    Errors detected..................:    1
    Warnings detected................:    9
    After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
    Pls have a look at these two and let me know what could I do to proceed further.
    tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
    INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
    INFO: Central Monitoring System is [SMP]. (found in config file)
          additional CENTRAL system y/[n] ?   :
    INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
    INFO:
          CCMS version  20040229, 64 bit, multithreaded, Non-Unicode
          compiled at   Jun 28 2010
          systemid      324 (IBM RS/6000 with AIX)
          relno         6400
          patch text    patch collection 2010/1, OSS note 1304480
          patchno       335
    INFO Runtime:
          running on    saptqa01 AIX 3 5 00069A8FD600
          running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    INFO profile parameters:
          alert/MONI_SEGM_SIZE = 200000000
          alert/TRACE          = 1
          SAPSYSTEM            = 30
          SAPSYSTEMNAME        = TQA
          SAPLOCALHOST         = saptqa01
          DIR_CCMS             = /usr/sap/ccms
          DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
          DIR_PERF             = /usr/sap/tmp
    INFO:
          pid           4165682
    INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
    INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct  3 2008,  kernel 6400_20020600_254,  platform 324 (IBM RS/6000 with AIX)]
            segment status     ENABLED
            segment started at Tue Sep 14 09:35:56 2010
            segment version    20040229
    ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
           Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
           Please change configuration with profile parameters
               ipc/shm_psize_01 = -<different pool nr>
           xor
               ipc/shm_psize_13 = -<different pool nr>
    EXITING with code 1

  • Adding systems with same SID in SMSY - solution manager

    Dear All,
    We are having systems with same SID's which  belongs to different landscape created for various customers.
    Currently We are having only one solution manager.
    I consider this example for explanation.
    Customer 1 : DEV --> QAS --> PRD ( SID's)
    customer 2 :  DEV --> ACC --> PRD  ( SID's)
    I would like to add  these 6 systems in a solution manager. For Customer 1 , I have included the systems in SMSY . But when i tries to add DEV, PRD for customer 2 , it fails  since this SID's are already present.
    Is there any other way to include by giving the different SID's DE2 but with correct IP and host Or we need to have one more solution manager ? Please anyone suggest me on this
    Thanks
    Raj

    Dear Juan ,
       We can add systems with same SID in smsy. I have attached the way in which i have done. This may help others. Thank you all for your suggestion
    Only use more than three characters if your landscape contains multiple systems with the same system ID (if you have a mirrored backup system that has the same ID as the original system, for example).
    If multiple systems in your landscape have the same system ID, choose as system name the system ID with a suffix of up to 5 characters (a sequential number, for example) to create a unique system name.
    The system accepts a system name of more than 3 characters if you choose Enter to confirm.
    Thanks
    Raj

  • Problems with Transport Management System

    Hi All,
    i seem to be having some issues with my Transport Management System, we have a two system landscape DEV & PRD, the operating system is windows 2003 server. i am trying to access the usr/sap/trans on the transport host (DEV) from the PRD system, i have put patches on the DEV server, but i can't access these patches from the PRD server. I have also tried to release a test transport, but the queues are not being updated. the systems are in the same Domain and the same transport group. on the PRD server i have specified the following value for the DIR_TRANS =
    DEVSERVER\sapmnt\trans. i have checked the files and they are shared, what could be the cause of this?

    Can you please check the access of global TRANS directory from your PRD server. Login to your PRD server, goto transaction STMS --> Overview --> Systems. Select your developement system and goto SAP System --> Check --> Transport Directory. If it can access the global directory the tick marks will come otherwise there is some problem with the directory access.
    Regards,
    Abhishek Jain

  • Expert Opionon on Landscape with Solution Manager 4

    Hi Experts:
    I would like your expert opinion of the following.  (Points will be rewarded for all posts)
    I have been tasked with setting up a DEMO environment involing Solution Manager 4 (SM4) , ECC 6.0 (ECC) and Business Intelligence 7 (BI7).
    We would like this to be set up in such a way so that we could maximize Solution Manager and show its full functionality and capbility to our clients. 
    I was thinking of setting up the landscape in the following order.
    3 Servers, OS: Windows, DB: MS SQL 2005
    1. Setup SAP Transport Host (This will reside in SM4)  This will be done as suggested in the SAP install guides.
    2. Install SM4 through a Central Install (ABAP only System)
    3. Post Install Activities (From SM4 Installation Guide)
    4. Share the following in ECC (
    SAPTRANSHOST\SAPMNT\trans.) and share it with SM4. (So, essentially ECC shares the same transport directory)
    (I am not sure about the above step...please confirm here)
    5. Install ECC through a Central Install (ABAP only System)
    6. Post Install Activities (From ECC Installation Guide)
    7. Share the following in BI7 (
    SAPTRANSHOST\SAPMNT\trans.) and share it with SM4. (So, essentially BI7 shares the same transport directory as ECC and SM4)
    (I am not sure about the above step...please confirm here)
    8. Install BI7 through a Central Install (ABAP only System)
    6. Post Install Activities (From BI7 Installation Guide)
    I do realize that we also need EP7 for BI7, but that is being planned for release 2, the client is only interested BW lite at the moment.
    Please feel free to critque the above and offer all alternatives.
    Thanks!
    I owe my SAP Basis Career to this site as I have learned so much here.  Again, Points will be rewarded.

    Hello Imran,
    I will answer in your text...
    I have been tasked with setting up a DEMO environment involing Solution Manager 4 (SM4) , ECC 6.0 (ECC) and Business Intelligence 7 (BI7).
    -->Exactly with escenario? Implementation scenario, monitoring, Change request management, service desk???
    We would like this to be set up in such a way so that we could maximize Solution Manager and show its full functionality and capbility to our clients.
    -->OK! all scenarios
    I was thinking of setting up the landscape in the following order.
    3 Servers, OS: Windows, DB: MS SQL 2005
    1. Setup SAP Transport Host (This will reside in SM4) This will be done as suggested in the SAP install guides.
    2. Install SM4 through a Central Install (ABAP only System)
    --->NOT possible, solman 4.0 has only one installation possibility, ABAP+J2EE
    3. Post Install Activities (From SM4 Installation Guide)
    4. Share the following in ECC (
    SAPTRANSHOSTSAPMNT     rans.) and share it with SM4. (So, essentially ECC shares the same transport directory)
    (I am not sure about the above step...please confirm here)
    ---> You don´t need to share the trans folder for any solman scenario
    5. Install ECC through a Central Install (ABAP only System)
    6. Post Install Activities (From ECC Installation Guide)
    -->ok
    7. Share the following in BI7 (
    SAPTRANSHOSTSAPMNT     rans.) and share it with SM4. (So, essentially BI7 shares the same transport directory as ECC and SM4)
    (I am not sure about the above step...please confirm here)
    ->Please don´t do it!!!
    8. Install BI7 through a Central Install (ABAP only System)
    6. Post Install Activities (From BI7 Installation Guide)
    ->Ok
    I do realize that we also need EP7 for BI7, but that is being planned for release 2, the client is only interested BW lite at the moment.
    -> With this two satellites, ECC and BI7 you work in Implementation scenario defining a Implementation project
    ->Also monitoring scenario and service desk will be cover
    -->For change request scenario still you need to have at least two client in each satellite to be able to test the scenario
    The transports managed by the solman must be done as always between roles
    DEV->QUA->PRD of the same product release
    Hope this helps,
    Dolores

  • Transport Management in SOlution Manager

    Hello All,
    We are currently running a Conf. Room Pilot for our customer. As part of the CRP, the customer has created a new template project in Solman and have also a created a new sandbox as a copy of their production for the CRP where we have got full access.
    The customer wants us to use SAP transport management functionality in Solman where all transports & changes made in the sandbox can be tracked and they can be moved to their production if required using solution manager.
    Now customer doesnot want to configure ChaRM.
    Two possiblities I see are
    1. Create an IMG project in Sandbox system through Solution Manager and in the Sandbox systems' project activate CTS functionality. Give TR Create authorization to team members with restriction of assignment to CTS project only. (Dis-allow TR creation w/o CTS project assignment in Sandbox)
    2. Activate Change Request Management (ChaRM ) in the template project with only CTS functionality (No other functionality of ChaRM is useful here). At the moment I am not sure if this will be allowed.
    please let me know, how do I restrict creation of TR without assigning to CTS?
    Regards,
    Shyam

    Any answer to this?

  • Manage transports (without ChaRM) in Solution Manager?

    Hi,
    How do I manage transports in target systems (ECC, APO, etc.) using Solution Manager. We have the Dev systems (ECC, APO) connected using RFC to Solution Manager. Configuration (SOLAR02) will be done using Solution Manager. So the question is - how do we manage transports (without ChaRM being present) using Solution Manager?
    Any suggestions/recommendations? I would greatly appreciate any feedback.
    Edited by: GiveMeFood on Sep 22, 2011 10:05 PM

    Hi,
    One of the main features available with the Solution Manager is ChaRM. It has been introduced to basically deal with the diverse transports management and related control framework over the SAP lanscape. Having a Solution Manager and not using ChaRM defeats the purpose of installing a Solution Manager in the first place. A better approach would be to incorporate the features provided by the system.
    In my opinion - you should configure ChaRM, else it would not make sense to have the SolMan in the landscape. You would start using one of the features which you already have !
    Regards,
    Srikishan

  • How to create Rfc for EP system in Solution manager

    Dear experts,
    I am doing ChaRM configuration for my EP system ( java only).
    I also configured CTS+ successfully but we want to integrate this with Chram in solman.
    I have done all configuration according to standard doc for ChaRM.
    But when creating project from solar_admin it is giving "   NO RFC for DEP system"
    so please suggest me how to create RFC for java system in Solution manager.
    thanks in advance
    dhiraj

    Hello,
    You need to setup an ABAP communication client and system, that's done through the TMS settings:
    For source system:
    - CTC                                              1
    - CTS_SYSTEM_TYPE                          JAVA  (others for a MDM system)
    - NON_ABAP_SYSTEM                          1
    - COMMUNICATION_SYSTEM:              (SAPSID of the ABAP communication system (e.g. the domain controller))
    - NON_ABAP_WBO_CLIENT                    (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
    - WBO_GET_REQ_STRATEGY                 TAGGED
    - WBO_REL_REQ_STRATEGY                 MANUAL
    For quality and production Java system (target systems):
    - CTC                                              1
    - CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
    - NON_ABAP_SYSTEM                         1
    - COMMUNICATION_SYSTEM:                 (SAPSID of the ABAP communication system (e.g. the domain controller))
    - DEPLOY_WEB_SERVICE                       CTSDEPLOY
    - DEPLOY_DATA_SHARE:
    When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
    When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
    Best regards,
    Miguel Ariñ

  • Change Request Management without Transport Managment System

    Hello,
    we would like to use the Change Request Management but without using the Transport Managment System (TMS). Means, we do not want that transport request are created automatically, we do not want that it is possible to log on to the satellite systems via the Solution Manager and we do not want to integrate the transport track into the Solution Manager.
    What effort do we have to estimate for such a change? Does anybody already use a process like this? We would be grateful for any idea or solution.
    Many thanks in advance.
    Jenny

    Hi Jenny,
    you can do this with the following activities in your custom Business Transaction (BT):
    - remove un-useful actions from your action list (TA: CRMC_ACTION_CONF)
    - remove the action from the actions depending on user status (TA: starting from SPRO)
    - unlock the switches from your SMI Project CTS Switches (TA: SOLAR_PROJECT_ADMIN)
    The effort, for copying a standard BT and remove the actions and testing it, is about 5 days, if you already know how to customize a ChaRM BT... last but not least if one of the standard flows is what you really need.
    Please let me know if you need more details, otherwise please reward the forum points
    Regards ,
    Giampaolo

Maybe you are looking for

  • Is There A Character Limit to Region Source?

    I created a PL/SQL Dynamic Content region. I was in the process of adding PL/SQL code to region source and every thing was working fine when I started getting the following error when ever I press the Apply Changes button: 1 error has occurred ORA-06

  • How can i do this?

    I have an oracle server on my computer. and i wanna connect from mobile phone with a java mobile application in mobile phone to my oracle server (localhost) that works on pc. I could connect to Oracle with my Java Application(j2se). There is no probl

  • Href links in slideshow not working

    hi, I have created a non-flash slideshow with WOW Slider which I find to be a very good program and is jquery based. the actual slideshow runs fine on iPad, my PC - and Android devices, but: the six slides have links embedded to other websites, that

  • Draw line over Image??.. in Grid Format

    Hello frnds, what i want to do in my project is to draw image on JPanel with grid lines.. ?? May be image in background and lines over image.. I searched forum before but coulnt find appropriate thread.. please help me out?? gervini

  • Upgrade Kernel - Trace

    Hi, Can someone tell me if it is possible to view the log of kernel modification (History of each upgrade) in PI environnement? Thank you very much for your help. Spawntae