Transport Management Workflow

Hi Workflow Experts,
I need help on how to configure transport management system I have checked the SAP help  but it was not helpful for me
In my system land scape I have Development system quality system and production system.
So when transport is released the it should be approved by module lead after his approval it will be imported to quality system
again when it is ok in QA then it should be move to production system
I have got WORKFLOW number WS71000008 which is being triggered but I did not get how it helps when we moved the request from quality to production.
Also there is no event attached to this workflow template but I check that the same workflow template is triggered and I want to create my own template but I dont know how to rplace standard workflow with my workflow teplate..

[Configuring a transport workflow|http://help.sap.com/saphelp_nw70/helpdata/en/c4/08fef0e2af11d2b41d00609419f767/frameset.htm]
[Check this|http://help.sap.com/saphelp_nw70/helpdata/en/5a/34bd66c03d11d2851c0000e8a57770/frameset.htm]
In SPRO you have to approach this path and the first badi is used to define you own workflow template
SAP NetWeaver ---> Application Server ---> System administration ---> Business Add-Ins in Change and Transport System Area -> Business Add-In for Defining the Template for the Task Documentation
and more over check if there is any entry in teh SWE2 txn with the WF template and the BOR CTPROPOSAL with event created

Similar Messages

  • Demo on SAP Transportation Management Overview + End to End Process Flow by Navin Nadpurohit-SAP TM Consultant - Krypt Inc-a Leading SAP Supply Chain Company

    Hello All,
    Attached is the link explaining SAP Transportation Management Overview and a system demonstration of End to End Process Flow.
    Link:
    TM Overview + End to End Process Flow - YouTube
    Thanks and best regards,
    Navin

    Very Good Demo Navin

  • Error while transporting the workflow object

    Hi all,
    Please be informed that while i transported the workflow changes to test system i encountered the sy-subrc 8 error as stated in below screen shots.

    Hi Ranjith
    Seems that the transport error is showing that your ID has locked the Workflow (user REDDYRAN).
    Can you do a syntax check of the workflow transported in this transport - in pftc and swdd? Do we get any error?
    Also see if you can execute FM SWD_WFD_REPLICATE_FROM_9999 in Quality (in SM37)  - provide the IM_TASK = WSxxxxxxxx (your workflow number).
    regards,
    Modak

  • Transport Management System with Solution Manager

    Dear all,
    Do you know the function transport management system(TMS) with solution manager, I already search in SAP document but not found this function.
    Do you know how to config solution manager for TMS and documents related with this function please guide for me!
    Thanks all very much !

    Hi,
    Check this link.
    https://websmp103.sap-ag.de/~sapdownload/011000358700000508502008E/ChangeRequestManagement.pdf
    Hope this answers your questions.
    Feel free to revert back.
    -=-Ragu

  • Issue Transporting Business workflow from one System to Another

    Hi All,
    As there are many limitations in Import/Export of Workflow I'm going for a Transport of Workflow from one sytem to another.
    There are some query's reagrding transporting of the Business Workflow through Transport Request.
    1)   How can get the Transport Request no. of the Workflow to be transported? (As there are no direct versions displayed from  menu).
    2)   If there are any dependent objects first how to find the dependent objects lof workflow like if  any data element, Domain, Table, Structure (if these objects are used in your WF definition or may be BOR method), Function module, function group BOR, Rule, WF template, task and Task assignment  ?
    3) How to get Transport Request no. of such dependent objects specifically The Task,Rule , WF template etc.?
    4) I have object Type ZBUS2081 related to it how can i get its TR ?
    Please describe as I'm new to workflow.
    Please identify if there can be some issues after transporting workflow .
    Regards,
    Ujjwal

    Hi Ujjwal,
    Please find the below hint's.
    1. Regarding the objects included in the Transport request check the Tables - E070*.
    2. For dependent objects, you should check the workflow template. You have to check all the Task's and in the task go to
       utilities ---> Object directory entry --> Lock overview . Here you can see the request. It will show you the current request for    the Task.
    3. To get the TR for Business object, Go to basic data ---> Transport data --> Here you can see the Request ID for the business object.
    Thanks,
    Viji.

  • Transport Management in SOlution Manager

    Hello All,
    We are currently running a Conf. Room Pilot for our customer. As part of the CRP, the customer has created a new template project in Solman and have also a created a new sandbox as a copy of their production for the CRP where we have got full access.
    The customer wants us to use SAP transport management functionality in Solman where all transports & changes made in the sandbox can be tracked and they can be moved to their production if required using solution manager.
    Now customer doesnot want to configure ChaRM.
    Two possiblities I see are
    1. Create an IMG project in Sandbox system through Solution Manager and in the Sandbox systems' project activate CTS functionality. Give TR Create authorization to team members with restriction of assignment to CTS project only. (Dis-allow TR creation w/o CTS project assignment in Sandbox)
    2. Activate Change Request Management (ChaRM ) in the template project with only CTS functionality (No other functionality of ChaRM is useful here). At the moment I am not sure if this will be allowed.
    please let me know, how do I restrict creation of TR without assigning to CTS?
    Regards,
    Shyam

    Any answer to this?

  • Scanner calibration for colour-managed workflow

    I would like to do a decent calibration of my Epson V750 Pro scanner to achieve a colour-managed workflow. I have the latest version X-Rite i1 Photo Pro 2 calibration kit, and although this enables me to calibrate my monitor and printer, it does not support scanner calibration.  I do have Silverfast Ai Studio which includes a scanner calibration facility - is that the best available to me or are there any other options, possibly using the i1 spectrophotometer as I know that it used to be possible to carry out calibration with the older versions of that equipment? Other than that, I'm using an Espon 3880 printer, running Vista x64 and using Photoshop CS5.

    Mike is probably right, the Epson profiles available in the Epson scanner sw are close enough. I;ve never seen any ******** about scanner output in this forum.

  • All Information regarding Change and Transport management System in SAP

    Hello Experts,
    Iam into Basis . I need all information ,fundamentals and concepts over Change and Transport management system in SAP .Its fundamentals,the way it works ,how requests r transporteded etc.  I want more of this information in regards to practical scenario. Plz dont provide help link as iam aware of that. I need good explanatory content ,in your own words shall be appreciated more. If any body has any self prepared good explanatory and procedural matter , tat will be of help.requested to revert at earliest as this is a bit urgent. My Email Id is [email protected]
    Useful answers shall be rewarded points.
    Thanks and Regards,
    Somya

    check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm

  • Setting up of Transports Management System  in EP7.0

    Hi Experts!!!!!
    Can you please provide the documents or links for configuring the transport management system for EP 7.0 Systems.
    Regards,
    Vamshi.

    Vamshi,
    These could be helpful.
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctstms/bcctstms.pdf
    Reward points for handy posts!
    Cheers,
    Sandeep

  • How to Configure Transport MAnagement system in CHARM

    Hi
    How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
    Can any one tell me the detailed process? If you have any Configuration document please share it to me
    Points will awarded for helpful answer
    Thanks
    Bhaskar

    In a two system landscape is it necessary to make development the domain controller always?
    No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
    This is not recommended.
    Regards,
    Ashutosh

  • Transport management system in ABAP

    Hello Abappers,
    Could you please provide me with the guided procedure of how the transport management system in ABAP works?
    Please explain it in detail.
    Points will be rewarded for relevant answers.
    Regards,
    Mansi.

    Hi,
    Try these links...
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCTSTMS/BCCTSTMS.pdf
    http://www.bayerbbs.de/fileadmin/user_upload/bbs_internet/pdf/brochures/Einkauf/TM3%20Broschre_en.pdf
    Do Reward points if useful....
    Regards
    AK

  • Purchase Order determination Transportation management

    Dear Gurus,
    We are in process of analysing transportation management system.
    Kindly let me know the process of how the system automatically determines the purchase order during Transfer in shipment cost seetlement transaction.
    If we have multiple POs, then how system identify which PO to pick.
    During maintaining of purchase data for transportation planning point, we maintain only few things, then how does system identify a particular PO.
    Any help is appreciated.
    Thanks.

    Purchaser Activities
           1.      Choose Process Purchase Orders.
           2.      To create purchase orders manually (without a preceding document), choose Create.
                                a.      The system opens a new document in the change mode.
                                b.      You add any missing entries at header and item level.
           3.      To process an existing purchase order, you have the following options:
    ¡        In the worklist, choose the number of the purchase order you wish to look at.
    ¡        Use the search and choose the document from the search results.
           4.      In order to process header and item data, choose Change.
    For example, you can use  in the partner overview to transfer the preferred vendor to the purchase order.
           5.      Choose Check to determine whether entries still have to be made or changed in the purchase order.
    A list shows any missing or incorrect entries.
           6.      In order to transfer the document to the vendor, choose Order.
                                a.      The system generates an output action.
                                b.      The system processes the output action and sends the document using a scheduled output report
    You can read more at
    http://help.sap.com/saphelp_srm30/helpdata/en/38/4cc5376848616ae10000009b38f889/content.htm
    Hope this helps, Thanks

  • How In Ecc 6.0 Transport Managment system works..

    Hi gurus,
    Any document and some tips about, what is the functionality Transport Management does. TMS functionality Starts once after shipping when we do physical delivery.
    Laxman

    SEND A TEST MAIL AT [email protected] will send the doc

  • SAP APO Transportation Managment 5.0

    Hi,
              I would like to know the the process to Implement Transportation and Planning 5.0 in SAP APO environment ,presently the client is using SD for transportation and distribution.
              If you could mail me implementation guide in regards to Transportation Managment it would help me a lot.
                Could u send me some links which will help me.I have refer to master Data sep-up and understood the process in help.sap.com.
    Thanks
    Partha

    Dear Partha,
    Pl. find the below link
    http://help.sap.com/bp_scmv140/BBLibrary/documentation/S12_BB_ConfigGuideEN_DE.doc
    This guide will show you basic configuration settings to be made in both the systems. Though it does not list all the configuration, but it is quite useful guide to begin with.
    Regards
    Sandeep Patil

  • Transporting a workflow from DEV to Prod

    Hi all expert,
         thanks for your help in solving my issue .. that was awesome guys. Now I stuck with transporting the workflow that i have made from development system to production system. I have tried using regular transport request, and the workflow number exist but no active version available. So I cannot using it. Any suggestion on something that might have been forgotten?
    thank you in advance for your help
    regards,
    david

    Hi David,
    I hope you configured the SWU3 in Production as well.
    Then in Production check the syntax error in your workflow template using CTRL+F2.
    During the transports, sometimes some containers may missing.
    If there is no syntax error, then in Development create new version and activate the workflow again and do the transport again.
    Before transport, do a buffer sync using transaction SWU_OBUF.
    Thanks,
    Viji.

Maybe you are looking for