"Transport Message - Data file must still be transferred"

Hello All,
I am having 2 System landscape for ECC 6.0.Dev & PRD.I have released the Transport Request from se09 of DEV but when it is goint to PRD,Transport Request is coming with the caption"Data file must still be transferred"Why is this message coming??How to resolve it??I am using AIX 5.2 & Oracle 10.2.

Hi Ashely,
It is not an error , it is due to your are using multiple transport directory i.e it mean you are using seperate trans directory for DEV and for PRD.
Both the system has its on trans directory.
If you don't want that message then you have to use coman trans directory for DEV and PRD.
in other words you have seperate transport group for dev and seperate transport group for quality.
http://help.sap.com/saphelp_nw04/helpdata/en/06/ea457a12a711d3b46f006094b9ea64/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/44/b4a1847acc11d1899e0000e829fbbd/content.htm
Thanks
Anil

Similar Messages

STMS -- data file must still be transferred

Hello All,
In our SAP ERP landscape we have configured the transport system, but in QAS and PRD the systems's queue shows status "data file must still be transferred" and a green twisted arrow icon for new transport requests in the queue. We can transfer the data files manually but we want to know if exist any possibility to schedule a job to do the transfer automatically.
Thanks,
HEPC

Hi,
Message "Data file must still be transferred" usually comes up when
there is no shared transport directory. The adjustment will copy the
transports to the local transport directory.
Please push the 'Adjust Import Queue' button on the top left
of the Import Queue screen (= button with green arrow)
Thank You.
Regards,
Deepika

XT278 Transport files for request &1 must still be transferred

Hi,
I´ve configured the transport routes between my DEV and PRD systems. But I´m getting the next message when I´m trying to import the request into the PRD system:
XT278 Transport files for request &1 must still be transferred
I´ve read that this success because each system has own transport group (
hostsapmnt rans).
I´ve put the PRD on the same transport group that DES but I´m getting a error while i tried to import a request.
What can i do? I want to avoid that every time what a request it will imported I want not to do QUEUE>VERIFY or Click in the green arrow.
More thanks

>> If I change the Transport group, Is it enough?
No
>> Or I must to change the DIR_TRANS parameter in the system?
Yes
>> The remained folders in, out will be afected? If I need to import support packages in one system and this have the DIR_TRANS pointed to the dir_trans of the DEV system, It will be affected?
Yes and No, both. But you would be in advantage that you will be 'able' to use the 'same' support package 'files' all throughout the landscape - Instead of copying the SPs/files separately for 'each' system's EPS/in
Thanks

I get the message: Archive files must be verified first

When I execute an archive deletion, after the Archive Write session is complete, the job shows green complete status but, with message in log "archive files must be verified first". Inspite of also unchecking the 'verify archive file before deleting' option. Any ideas on getting ahead with this archive delete?

Are you updating from the App Store when you get that error message?
If so, thry using the 10.9.2 Combo update -> http://support.apple.com/kb/DL1726.
Good luck,
Clinton

Configure Outlook Data File

One of our users received a message after opening Outlook about archiving their email. They clicked on Yes or OK and now when they launch outlook, they get the message "This data file has not been configured. Select an existing file to configure,
or type the name of a new file to create." It then prompts to find the .pst file, which brings up the archive.pst file. If I click Cancel, it displays the message "Properties for
this data file must be defined prior to use". It appears they can still send and receive email but I'm not sure what the errors are about. This is Outlook 2013. Thanks.

Hi Panther ,
First go and check the default Outlook PST file by following the given path:
drive:\Users\user\AppData\Local\Microsoft\Outlook
If outlook.pst exist there, then select it as default from the Outlook settings. On the other hand, if you don’t find any outlook.pst apart from archived PST file then go and recreate the new Outlook data file and save it as default.
For more:
http://support.microsoft.com/kb/829918/en-us
Note: outlook.pst file sometimes exist in hidden folders, so make them visible.
Thanks
Clark Kent

Data files are offline / tablespace offline

I am confused on the concept of data file offline.
What happened when you take data file offline?
Is data file offline because of disk damage? we see the error that data file is haning a problem, we have manually to take data file offline? how?
Why is tablespace offline but data file is still online?
Please help!
Thanks
S.

ski123 wrote:
I am confused on the concept of data file offline.
What happened when you take data file offline?The offline datafile means simply that the file is not available anymore for the access. All the objects for the offline file become inaccessible for the users to access.
Is data file offline because of disk damage? we see the error that data file is haning a problem, we have manually to take data file offline? how?Yes it can happen that the data file goes offline because of any kind of damage either over the disk, or also with the file itself. For example, there may be a chance that the file is not available anymore , may be because someone has deletedthe file. So most of the times, Oracle would offline the file by itself. In any case, if the file doesn't go offline by itself than you need to take it offline yourself as the recovery for the file can't happen if its online. You would get the error messages that oracle can't acquire the exclusive access over the file.
Why is tablespace offline but data file is still online?Not sure that I did see this ever myself. Tablespace is nothing but the container for the datafile so if there is a file of it which is offline and that's the only file in the tablespace, the tablespace can't stay as online. Show us an output for the same.
The links given by Anantha are must for you to read the cocept of offlining a tablespace. Make sure you read them for sure.
HTH
Aman....

Re-generating deleted object through Co/Data Files

Hi Folks
I have created a BAPI, say ZBAPI_TEST, in ECC6 System and its associated TR got released.
I have copied the Co/Data files to a local folder and deleted the original Co/Data files from \usr\sap\trans. Later I have removed ZBAPI_TEST and its associated structures.
Then I re-imported the Co/Data friles to \usr\sap\trans\ from my local folder and attached to a new TR (using Include Objects).
But, the object ZBAPI_TEST is not existing now. What could be the problem?
My Q is: since the Co/Data Files must contain the object and its associated structures, ZBAPI_TEST was supposed to exist after re-import.. right?
Please comment....
Cheers
Rajvat

Aditya
Thanks for your suggestions. Still I have a query related to this. Consider the below scenario......
I have developed a BAPI object in ECC6 System. Released the TR and saved the Co/Data files in my Local system folder.
Then, I
* removed the Co/Data File from Application Server
* deleted the object and its associated structures from the ECC6 system
* un-released the TR
* removed all the references of object
* deleted the TR itself
All that we remain with is the Co/Data Files of the TR. We just know the TR number also.
NOW,
I want to reproduce my deleted object using the Co/Data Files in my hand.
Is it possible? Is there any technical difficulties in accomplishing this?
Please comment,
Rajvat

ASO - .dat file in default directory

Hi,
Our .dat file in the 'default' directory on our server is 209,715,200 The sys admin says we need to move it as it's too big for that directory. They do this on the BSO cubes and identify a path where the 'Storage' resides. However she doesn't see this option for ASO. Is this not possible in ASO and the .dat file must remain where it's at? Or is there an alternative method to store the .dat file somewhere else?

You mean managing the tablespaces ? - http://docs.oracle.com/cd/E17236_01/epm.1112/eas_help/tablespc.html
Cheers
John
http://john-goodwin.blogspot.com/

Synchronous processing of dat file using Adobe Output Server

Hello everyone
I have a doubt regarding Adobe Output Server. Currently my output server is running as a window service named "Adobe Central Output Server" in my machine referring to executable path E:\Jetform\Central\Control\jfservic.exe. It keeps on running irrespective of whether .dat file is present for further processing or not. In case .dat is there in data folder[location where my code writes into .dat file] it picks it up and does all the processing to give the result in form of Print/Fax. But when there is no .dat file present , still the service keeps on running consuming memory & cpu resource.
Curently my code drops a .dat file in data folder and dont bother about what happens to that .dat file afterwards. Its Adobe Output Server service that is running that keeps on monitoring data folder for any new dat file to process them further.
I want to stop that window service permanently and i wish to change some logic in my code so that as and when my program drops a .dat file in Data folder then i invoke Adobe Output Server or some of its component so that it picks up that dat file and does all the processing to generate Print/Fax and once its done with processing , the execution of Adobe central server ends. And it remains dead till its invoked by the program to process a new dat file.
So basically i was wondering whether there is possibiliy of invocation of Adobe Output Server is available or not for synchronous processing of dat file from the code.
Any suggestions , any ideas , any doubts on it are most welcome.
jaY

i faced the same thing
1- you have to do something in SAP ( i am looking for someone to tell me what )
2- create a job & name it by (ANYNAME_EMAIL)
3- Inside the Job create the following Tasks
a- SAPMERGER A
b- SAPMERGER
c- SAPEMSEND
that's it / AS Simple AS That
Please tell me if you still facing the same problem

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

While importing a request error message' Check-sum error in data file'

Hi Friends
I have a problem.
We are trying to inport a request after putting the files in cofile and data file folders( 4.6C System).While doing so an error message is seen in the log " Check-sum error in data file after XXXX bytes".
Can some one help me with this?
Thanks
Regards
Ankur

Hi Ankur,
It is sure your file is corrupted or not present.
Check in cofiles and data directory under /usr/sap/trans your transport request number.
Best Wishes.
Kumar

Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred

Hi All,
I have done a BADI implementation for ME_PROCESS_PO_CUST and when I try to convert a PR to PO using ME59N in ECC u2013 AFS System I am getting below error message.
Data from Business Add-In ME_PROCESS_PO_CUST not transferred.
I am trying to populate certain PO fields ( ekko and ekpo ) from PR fields. But the above error occurs when I update the Ex Factory Date manual that is EKPO-J_3AEXFCM.
I am updating this in the method PROCESS_ITEM and what I found while debugging is in the class CL_PO_HEADER_HANDLE_MM, in the implementation of IF_FLUSH_TRANSPORT_MM~START, the contents of field u2018my_iteration_countu2019 keeps increasing and becomes 10 and raises this error.
I read few of the related questions raised by others in this forum and understood that this can happen if I try to change the field that is disabled ( greyed) in ME22N. But this field that I am talking about is enabled.
I also tried to move my code of populating the field EKPO-J_3AEXFCM from the PROCESS_ITEM to the enhancement point just above the user exit EXIT_SAPMMO6E_018 but still it doesnu2019t resolve the error.
(We donu2019t want to use User Exit and hence we are trying with BADIs or enhancement point.)
Can anyone please help me with this. I also found an OSS note 1334046 but not sure if that can resolve my issue.
Thanks in advance.
Ameesha.

Hi Ameesha,
i think u need to implement the BADI ME_PROCESS_PO_CUST in SPRO settings.
SPRO>Purchasing>Business Add-in Purchasing-->BAdI: Enhance Processing of Enjoy Purchase Order
try this once.
All check this link.
[Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred;
Hope it helps.
Regards,
Raj

Hi all, need data file and co file after single transport in 6.4 or 6.7

hi all
following is the requirement
To process/compile the attached programs (given below) in 6.4/7 Kernel (SAP 6.4 version or 6.7 version )and send a single transport (Data File and Co File).
these data file and co file are flat files.
CAN ANYONE HELP ME GETTING THESE FLAT FILES. I need these flat files urgently.
WHAT U HAVE TO DO IS:
IF U HAVE 6.4 OR 6.7 VERSION, JUST TRANSPORT FOLLOWING 10 PROGRAMS IN SINGLE TRANSPORT IN TESTING SYSTEM OR DEVELOPEMENT SYSTEM AND AFTER GETTING DATA FILE AND CO FILE U CAN REVERT THE TRANSPORT.
Programs files are as follows: (total number of prog is 10)
1.
FUNCTION Z_3N_CKS_EXIST_USER .
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSMDTID) TYPE USR02-MANDT DEFAULT SY-MANDT
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" EXCEPTIONS
*" USER_DONT_EXIST
*" USER_EXISTS
FUNCTION TO CHECK IF USER EXISTS
CLEAR RCODE.
CALL FUNCTION 'USER_EXISTS'
EXPORTING
BNAME = CKSUSRID
CLIENT = CKSMDTID
EXCEPTIONS
USER_DONT_EXIST = 1
USER_EXISTS = 0.
RCODE = SY-SUBRC.
ENDFUNCTION.
2.
FUNCTION Z_3N_CKS_LOCKSTATE.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO OBTAIN THE CURRENT LOCK STATUS FOR A USER
*{ PASSGOAPR06
*\DATA:LOCKSTATE(50) type c,
*\C_LOCKED_BY_ADMIN like usr02-uflag.
*\tables:usr02.
DATA:LOCKSTATE(50) type c.
*} PASSGOAPR06
CLEAR: RCODE, LOCKSTATE.
SELECT SINGLE * FROM USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01. "No such User
EXIT.
ENDIF.
*{ PASSGOAPR06
IF USR02-UFLAG Z C_LOCKED_BY_ADMIN AND
USR02-UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF USR02-UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF USR02-UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
uflag = usr02-uflag.
IF UFLAG Z C_LOCKED_BY_ADMIN AND
UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
3.
FUNCTION Z_3N_CKS_PWDCHG_INITIAL.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO INITIALISE USERs PASSWORD, USER WILL BE FORCED
TO CHANGE PASSWORD ON NEXT LOGIN
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01.
else.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
PASSWORD = CKSUSRPWD
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
loop at return.
if return-type eq 'E' or return-type eq 'A'.
rcode = 13.
endif.
endloop.
endif.
ENDFUNCTION.
4.
FUNCTION Z_3N_CKS_VERIFY_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE RSYST-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE OPTIONAL
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO VALIDATE A USER
*{ PASSGOAPR06
TABLES:USR02.
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC = 4.
RCODE = 01. "no such user
EXIT.
ELSEIF CKSUSRPWD = SPACE.
RCODE = 03. "invalid old password
EXIT.
ELSE.
CALL FUNCTION 'SUSR_LOGIN_CHECK_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = CKSUSRPWD
EXCEPTIONS
WAIT = 1
USER_LOCKED = 2
USER_NOT_ACTIVE = 3
PASSWORD_EXPIRED = 4
WRONG_PASSWORD = 5
NO_CHECK_FOR_THIS_USER = 6
INTERNAL_ERROR = 7
OTHERS = 8
CASE SY-SUBRC.
WHEN '2'. RCODE = 02. "user disabled/blocked
WHEN '3'. RCODE = 02. "user disabled/blocked
WHEN '4'. RCODE = 03. "invalid old password
WHEN '5'. RCODE = 03. "invalid old password
WHEN '8'. RCODE = 12. "internal error
ENDCASE.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
5.
*& Include ZMS01JTOP *
PROGRAM MS01JTOP MESSAGE-ID 01 LINE-SIZE 132. "Berechtigungsdatenpflege
13.08.93
INCLUDE MS01CTP2.
INCLUDE MS01CTCO.
TABLES: XU200, XU213, XU310, XU350, XU390, XU400.
TABLES: TSTC, TSP03, TPARA, TPARAT.
TABLES: *USR01, *USR03, USR15.
TABLES: SOUD, SOUD3.
*ABLES: ZCSA, ADRS.
*{ PASSGOAPR06
TABLES: usr02.
DATA: uflag type x.
DATA: begin of return occurs 0.
INCLUDE structure bapiret2.
DATA: end of return.
DATA calling_cksusrid like usr02-bname.
DATA: init_pass like BAPIPWD.
INCLUDE USER_CONSTANTS.
*} PASSGOAPR06
CONTROLS TC213 TYPE TABLEVIEW USING SCREEN 213.
CONTROLS TC520 TYPE TABLEVIEW USING SCREEN 350.
DATA: COPYOK TYPE I,
RENAMEOK TYPE I,
DATFM1,
DATFM2,
DATFM3,
DATFM4,
DCPFM1,
DCPFM2,
USERNAME LIKE USR01-BNAME,
LOCK,
UNLO,
STATFLAG TYPE I VALUE 0,
NAVIFLAG TYPE I VALUE 0,
PARTOPIX TYPE I,
PARFILL TYPE I,
PARAMETER LIKE USR05-PARVA,
PARID LIKE USR05-PARID,
PARLOOP LIKE SY-STEPL,
SHOW_ONLY VALUE ' ',
INTPRO_LOADED TYPE I VALUE 0,
EXT_SECURITY VALUE ' '.
DATA: H_201_USGRP LIKE USGRP-USERGROUP,
H_201_VALID TYPE C,
CC201 LIKE SY-CUCOL VALUE 2,
CR201 LIKE SY-CUROW VALUE 6,
SAVE_LINE201 LIKE SY-LILLI VALUE 1,
SAVE_LSIND201 LIKE SY-LSIND VALUE 1.
DATA: OFFICENAME LIKE SOUD-USRNAM.
DATA: BEGIN OF NAME_IN.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_IN.
DATA: BEGIN OF NAME_OUT.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_OUT.
DATA: BEGIN OF EMPTYPROF OCCURS 2.
INCLUDE STRUCTURE USREF.
DATA: END OF EMPTYPROF.
DATA: BEGIN OF PROFILES OCCURS 10.
INCLUDE STRUCTURE USREF.
DATA: END OF PROFILES.
DATA: MAXPAR TYPE I VALUE 300.
DATA: BEGIN OF TABPAR OCCURS 300,
PARID LIKE USR05-PARID,
PARVA LIKE USR05-PARVA,
END OF TABPAR.
DATA: BEGIN OF DELTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF DELTAB.
DATA: BEGIN OF ADDTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF ADDTAB.
DATA: BEGIN OF ADDRESS_DATA.
INCLUDE STRUCTURE SADRP_USR.
DATA: END OF ADDRESS_DATA.
DATA:
CLEAR TYPE X VALUE '00'.
*ATA: BEGIN OF ADRSDATEN.
INCLUDE STRUCTURE ADRS.
*ATA: END OF ADRSDATEN.
06.10.95 Tosun
DATA 930_FLAG.
"$$
6.
FUNCTION Z_3N_CKS_LOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM LOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_LOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
7.
FUNCTION Z_3N_CKS_PWDCHG_DIRECT.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO CHANGE USERs PASSWORD
Password is initialised to a fixed value,
to avoid having to provide the valid old password
If the password change fails, the change is
rolled back - this is required because
BAPI_USER_CHANGE does an internal commit.
CLEAR: USR02, RCODE.
DATA: L_TIME LIKE SY-UZEIT,
ZLIN TYPE I.
*{ PASSGOAPR06
calling_cksusrid = cksusrid. "Save calling userid
init_pass = 'INITPASS'.
*} PASSGOAPR06
do 1 times.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 1.
else.
* Change login to initpass.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
*{ PASSGOAPR06
*\ PASSWORD = 'INITPASS'
PASSWORD = init_pass
*} PASSGOAPR06
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
* Evaluate return table, if not success, rcode = 13
describe table return lines zlin.
IF zlin > 0.
IF return-type ne 'S'.
rcode = 13.
exit.
ENDIF.
ENDIF.
* Wait 1 second, otherwise table ush02 gets the same key as before.
* Not very good, but its the only way, because the wait up to
* statement includes a db-commit.
L_TIME = sy-uzeit.
WHILE L_TIME = sy-uzeit.
GET TIME.
ENDWHILE.
* Change 'INITPASS' to input login
CALL FUNCTION 'SUSR_USER_CHANGE_PASSWORD_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = 'INITPASS'
NEW_PASSWORD = CKSUSRPWD
NEW_BCODE = '0000000000000000'
NEW_CODVN = ' '
EXCEPTIONS
CHANGE_NOT_ALLOWED = 1
PASSWORD_NOT_ALLOWED = 2
INTERNAL_ERROR = 3
CANCELED_BY_USER = 4
OTHERS = 5.
case sy-subrc.
when '0'. rcode = 0.
when '1'. rcode = 2.
when '2'. rcode = 4.
when '3'. rcode = 12.
when '4'. rcode = 2.
when '5'. rcode = 12.
ENDCASE.
ENDIF.
exit. "end of do 1 times "
enddo.
* rollback if it didn't work
if not rcode is initial.
rollback work.
endif.
ENDFUNCTION.
8.
FUNCTION Z_3N_CKS_UNLOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM UNLOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_UNLOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
9.
*& Include ZMS01JO10 *
MS01JO10 Module before Output
14.05.93
MODULE D150_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D150_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10 AND SY-LILLI = 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10.
XU150-VON = SY-LISEL.
ELSE.
COUNTX = PUSR - 1.
ASSIGN SY-LISEL+COUNTX(12) TO <TEXT>. " unicode
WRITE <TEXT> TO XU150-VON.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
IF FERTIG = 2.
FCODE = 'BACK'.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE.
MODULE D150_SETSTATUS *
PF-Status setzen *
MODULE D150_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 150.
XU150-SELPROF = XU150-SELFEST = XU150-SELADRE = XU150-SELPARA = 'X'.
XU150-SELMENU = 'X'.
ENDMODULE.
MODULE D155_SETSTATUS *
PF-Status setzen *
MODULE D155_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 155.
ENDMODULE.
MODULE D200_SELECT *
Einen Eintrag aus der Liste ins Dynpro uebernehmen *
MODULE D200_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU200-XUSER = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
IF FCODE2 = 'USER' OR FCODE2 = 'FEST' OR FCODE2 = 'ADRE' OR
FCODE2 = 'PARA' OR FCODE2 = 'ADMI' OR FCODE2 = 'RESE' OR
FCODE2 = 'N '.
SUPPRESS DIALOG.
ENDIF.
PERFORM SET_STATUS USING 200.
ENDMODULE.
MODULE D213_VALOUT *
Festwerte auf das Dynpro schreiben. *
MODULE D213_VALOUT OUTPUT.
DEL = 0.
XU213-DIA = '.'.
XU213-ODC = '.'.
XU213-BDC = '.'.
XU213-CPIC = '.'.
XU213-BATCH = '.'.
CASE USR02-USTYP.
WHEN TYPDIA.
XU213-DIA = 'X'.
WHEN TYPBATCH.
XU213-BATCH = 'X'.
WHEN TYPCPIC.
XU213-CPIC = 'X'.
WHEN TYPBDC.
XU213-BDC = 'X'.
WHEN TYPODC.
XU213-ODC = 'X'.
ENDCASE.
IF USR02-LTIME <> SPACE AND USR02-LTIME <> '000000'.
LOOP AT SCREEN.
CASE SCREEN-GROUP1.
WHEN 'MOD'.
SCREEN-INVISIBLE = '1'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDCASE.
ENDLOOP.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
CODEFLAG = 1.
ELSE.
CLEAR XU213-BCODE.
CLEAR XU213-BCODE2.
IF USR02-BCODE <> '0000000000000000' AND BCODE_C = SPACE.
CODEFLAG = 0.
ENDIF.
IF CODEFLAG = -2.
SET CURSOR FIELD 'XU213-BCODE'.
MESSAGE S290.
ELSE.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
ENDIF.
ENDIF.
ENDMODULE.
MODULE D213_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D213_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 4.
MESSAGE S209.
ELSE.
ASSIGN SY-LISEL(PROFLNG) TO <TEXT>.
MOVE <TEXT> TO XU213-PROFILE.
PERFORM AUTH_CHECK USING OBJ_PROF
XU213-PROFILE SPACE ACT_INCLUDE RC.
IF RC <> 0.
MESSAGE S478 WITH XU213-PROFILE.
ELSE.
FOUND = 0.
LOOP AT TABUSR.
IF TABUSR-PROFILE = XU213-PROFILE.
FOUND = 1.
MESSAGE S268 WITH XU213-PROFILE.
EXIT.
ENDIF.
ENDLOOP.
IF FOUND = 0.
PERFORM EXIST_USR10
USING XU213-PROFILE AKTIVATED SPACE RC.
CLEAR TABUSR.
TABUSR-PROFILE = XU213-PROFILE.
IF USR10-TYP = COLECTPROF.
TABUSR-SAMPROF = 'X'.
ENDIF.
Profiletext lesen
CLEAR USR11.
SELECT SINGLE * FROM USR11
WHERE LANGU = SY-LANGU
AND PROFN = TABUSR-PROFILE
AND AKTPS = AKTIVATED.
TABUSR-PTEXT = USR11-PTEXT.
APPEND TABUSR.
XU213-FILL = XU213-FILL + 1.
IF XU213-FILL >= MAXUSR.
MESSAGE S269.
ENDIF.
UCHANGE = 1.
PERFORM NOTSAVED.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 213.
PERFORM MESSAGE.
IF EXT_SECURITY <> '1'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'EXT'.
SCREEN-INPUT = '0'.
SCREEN-INVISIBLE = '1'.
SCREEN-ACTIVE = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE.
MODULE D213_PROFOUT *
Profiles auf den Bildschirm ausgeben. *
MODULE D213_PROFOUT OUTPUT.
include <symbol>.
COUNTX = XU213-TOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= XU213-FILL. "Am Ende der Tabelle ?
READ TABLE TABUSR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABUSR TO XU213. "Daten auf den Bildschirm
xu213-samprof = sym_documents.
ENDIF.
ENDIF.
USRLOOP = SY-LOOPC.
ENDMODULE.
MODULE D254_SUPPRESS *
Dialog fuer Dynpro 254 unterdruecken *
MODULE D254_SUPPRESS OUTPUT.
SUPPRESS DIALOG.
ENDMODULE.
MODULE D310_SETSTATUS *
PF-Status setzen *
MODULE D310_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 310.
IF STATFLAG = 1.
LOOP AT SCREEN.
IF SCREEN-NAME = 'USR01-CATTKENNZ '.
AUTHORITY-CHECK OBJECT 'S_DEVELOP'
ID 'DEVCLASS' DUMMY
ID 'OBJTYPE' FIELD 'SCAT'
ID 'OBJNAME' DUMMY
ID 'P_GROUP' DUMMY
ID 'ACTVT' FIELD '70'.
IF SY-SUBRC <> 0.
SCREEN-INPUT = 0.
SCREEN-INVISIBLE = 1.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ELSE.
PERFORM SET_STATUS USING 330.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D310_FORMAT_OUT. *
Datumsformat und Dezimalpunktformat entsprechend Daten aus usr01 *
ankreuzen. *
MODULE D310_FORMAT_OUT OUTPUT.
XU310-DATFM1 = ' '.
XU310-DATFM2 = ' '.
XU310-DATFM3 = ' '.
XU310-DATFM4 = ' '.
XU310-DATFM5 = ' '.
XU310-DCPFM1 = ' '.
XU310-DCPFM2 = ' '.
XU310-SPDB1 = ' '.
XU310-SPDA1 = ' '.
IF USR01-DATFM < 1 OR USR01-DATFM > 5.
CALL 'C_SAPGPARAM'
ID 'NAME' FIELD 'zcsa/moddatfm'
ID 'VALUE' FIELD USR01-DATFM.
ENDIF.
CASE USR01-DATFM.
WHEN 1.
XU310-DATFM1 = 'X'.
WHEN 2.
XU310-DATFM2 = 'X'.
WHEN 3.
XU310-DATFM3 = 'X'.
WHEN 4.
XU310-DATFM4 = 'X'.
WHEN 5.
XU310-DATFM5 = 'X'.
WHEN OTHERS.
XU310-DATFM1 = 'X'.
ENDCASE.
IF USR01-DCPFM = ' '.
XU310-DCPFM1 = 'X'.
ELSE.
XU310-DCPFM2 = 'X'.
ENDIF.
IF USR01-SPDB = 'G'.
XU310-SPDB1 = 'X'.
ENDIF.
IF USR01-SPDA = 'D'.
XU310-SPDA1 = 'X'.
ENDIF.
CLEAR TSP03.
SELECT SINGLE * FROM TSP03
WHERE PADEST = USR01-SPLD.
ENDMODULE.
MODULE D320_SETSTATUS *
PF-Status setzen *
MODULE D320_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 320.
ELSE.
PERFORM SET_STATUS USING 340.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D330_SETSTATUS *
PF-Status setzen *
MODULE D330_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 330.
ENDMODULE.
MODULE D340_SETSTATUS *
PF-Status setzen *
MODULE D340_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 340.
ENDMODULE.
MODULE D350_SETSTATUS *
PF-Status setzen *
MODULE D350_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
TABPAR-PARID = SY-LISEL.
APPEND TABPAR.
PARFILL = PARFILL + 1.
ENDIF.
SELE = 0.
ENDIF.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 350.
ELSE.
PERFORM SET_STATUS USING 360.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D350_PAROUT *
Parameter auf den Bildschirm ausgeben. *
MODULE D350_PAROUT OUTPUT.
COUNTX = PARTOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= PARFILL. "Am Ende der Tabelle ?
READ TABLE TABPAR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABPAR TO XU350. "Daten auf den Bildschirm
SELECT SINGLE * FROM TPARAT
WHERE SPRACHE = SY-LANGU
AND PARAMID = TABPAR-PARID.
ENDIF.
ENDIF.
PARLOOP = SY-LOOPC.
ENDMODULE.
MODULE D351_SETSTATUS *
PF-Status setzen *
*ODULE D351_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU350-PARID = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 352.
SUPPRESS DIALOG.
*NDMODULE.
MODULE D360_SETSTATUS *
PF-Status setzen *
MODULE D360_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 360.
ENDMODULE.
MODULE D390_STATUS *
PF-Status setzen. *
MODULE D390_STATUS OUTPUT.
data uflag_x type x. " unicode
SELECT SINGLE * FROM USR02
WHERE BNAME = XU200-XUSER.
uflag_x = USR02-UFLAG. " unicode
IF SY-SUBRC <> 0.
XU390-STATTEXT = ' Nicht vorhanden.'(222).
ELSE.
IF uflag_x Z YULOCK AND uflag_x Z YUSLOC. " unicode
PERFORM SET_STATUS USING 390.
XU390-STATTEXT = ' Nicht gesperrt. '(223).
ELSE.
IF uflag_x O YULOCK. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Falschanmeldungen gesperrt !!!'(224).
ENDIF.
IF uflag_x O YUSLOC. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Systemmanager gesperrt !!!'(225).
ENDIF.
ENDIF.
ENDIF.
LOCK = '.'.
UNLO = '.'.
ENDMODULE.
MODULE D400_CLEAR_CODE *
Passwortfeld loeschen. *
MODULE D400_CLEAR_CODE OUTPUT.
CLEAR XU400-NEWCODE.
CLEAR XU400-NEWCODE1.
ENDMODULE.
MODULE D400_SETSTATUS *
PF-Status setzen *
MODULE D400_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 400.
ENDMODULE.
MODULE D500_SUPPRESS *
Dynpro unterdruecken *
MODULE D500_SUPPRESS OUTPUT.
SET PF-STATUS '0200'.
SUPPRESS DIALOG.
ENDMODULE.
*& Module D214_SETSTATUS OUTPUT
MODULE D214_SETSTATUS OUTPUT.
SET PF-STATUS '0214'.
SET TITLEBAR '214'.
ENDMODULE. " D214_SETSTATUS OUTPUT
*& Module D216_PROFOUT OUTPUT
MODULE D216_PROFOUT OUTPUT.
COUNTX = XU213-TOPIX2 + SY-STEPL - 1. "Bild-oben-Pos. in Tab. festst
IF COUNTX <= XU213-FILL2. "Am Ende der Tabelle ?
READ TABLE INTPRO2 INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING INTPRO2 TO XU213. "Daten auf den Bildschirm
ENDIF.
ENDIF.
ENDMODULE. " D216_PROFOUT OUTPUT
*& Module D504_STATUS OUTPUT
MODULE D504_STATUS OUTPUT.
SET PF-STATUS '0504'.
SET TITLEBAR '604'.
ENDMODULE. " D504_STATUS OUTPUT
*& Module D217_SETSTATUS
MODULE D217_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 217.
PERFORM MESSAGE.
IF FERTIG = -1.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE. " D217_SELECT OUTPUT
*& Module D202_SETSTATUS OUTPUT
text *
MODULE D202_SETSTATUS OUTPUT.
SET PF-STATUS '0203'.
SET TITLEBAR '203'.
ENDMODULE. " D202_SETSTATUS OUTPUT
*& Module D200_LESEN_MEMORY OUTPUT
Schnittstelle mit RSUSR008
call transaction su01 and skip first screen
MODULE D200_LESEN_MEMORY OUTPUT.
IMPORT FCODE FROM MEMORY ID 'OK_CODE'.
EXPORT FCODE FROM SPACE TO MEMORY ID 'OK_CODE'.
ENDMODULE. " D200_LESEN_MEMORY OUTPUT
"$$
10.
*& Report ZSAPMS01J *
23.10.92
set extended check off.
INCLUDE ZMS01JTOP.
*INCLUDE MS01JTOP. "Datendeklarationen
INCLUDE ZMS01JO10.
*INCLUDE MS01JO10. "PBO-Module
*INCLUDE ZMS01JI10.
INCLUDE MS01JI10. "PAI-Module
*INCLUDE ZMS01JF10.
INCLUDE MS01JF10. "Forms
*INCLUDE ZMS01JR10.
INCLUDE MS01JR10. "Reporting
*INCLUDE ZMS01CC10.
INCLUDE MS01CC10. "Checks
*INCLUDE ZMS01CD10.
INCLUDE MS01CD10. "Datenzugriffe
set extended check on.
see there are in total 10 prog that should go in one trasport order. this will creat data file and co file. these are flat files. i want these flat files.
do it in developement server or testing server and then delete it or revert it once you get data file or co file.
i will greatful to u if you could send me these flat files.
thanx in advance
raj

hi all,
this can be done in 4.6 version also.
thanx for spending time on this.
thanx&regards
raj

Error Message: The data provider required to connect to the local data file could not be found. The file will be added to the project but the typed DataSet associated with the file will ont be generated.

I am currently taking the course "C# Fundamentals" from Bob Tabors site: LearnVisualStudio.NET . I'm on day 8 where we are integrating SQL Server with C#. In Lesson 6 and 7, (havent' gotten past these two) I am having an
issue. In Lesson 6, "Retrieving Data with ADONET 2 in a Connected Scenario (SQL Server Compact Edition) when I go to create the data file I get the error message I typed into the title. I cannot get the db to appear in the Solution
Explorer, or open up so I can create a table. When I try to skip by that lesson, and complete lesson7, I'm running into the same basic problem, where the error messages are different but I get an exception when I attempt to run the program. Even
though I have been able to create the table for this lesson, the Exception states I have an invalid object name 'Customers' which is the name of the table. I have tried reading several different suggestions for correcting this issue, but have not understood
exactly what I need to do. Since I work from home on my computer, I do not want to do anything with files or downloads unless I understand what I need to do, cause I do not want to lose my job. Any help would be appreciated.
JennyBarrett7

Hi
According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
Change Data Source dialog. If not, you need to install
SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, you can review the following link:
Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
Thanks
Lydia Zhang

"Transport Message - Data file must still be transferred"

Similar Messages

Maybe you are looking for