Transport: Multiple Source Systems in QA

Hi gurus,
I have developed in BW Dev Transfer Rules starting from one R/3 Dev Source System.
Now I need to transport BW Dev settings into BW QA system, where I have 4 R/3 QA Source Systems.
In RSA1 --> Transport Connection --> Conversion (F8) I can introduce only one record to map Dev Source System with QA Source System.
How can I define that the single Dev Source System must be translated into several QA Source System ?
Is it possible ?
Thank you in advance.
Riccardo.

Hi,
Import 4 times by having Different conversion Each time.
And another thing:
Have you tried to create 4 Conversions at a time with same Source of source system and importing with these 4 conversions at a time. Even I too feel that it would not work. But you should try atleast once.
With rgds,
Anil Kumar Sharma .P

Similar Messages

  • SLT Replication for the same table from Multiple Source Systems

    Hello,
    With HANA 1.0 SP03, it is now possible to connect multiple source systems to the same SLT Replication server and from there on to the same schema in SAP HANA - does this mean same table as well? Or will it be different tables?
    My doubt:
    Consider i am replicating the information from KNA1 from 2 Source Systems - say SourceA and SourceB.
    If I have different records in SourceA.KNA1 and SourceB.KNA1, i believe the records will be added during the replication and as a result, the final table has 2 different records.
    Now, if the same record appears in the KNA1 tables from both the sources, the final table should hold only 1 record.
    Also, if the same Customer's record is posted in both the systems with different values, it should add the records.
    How does HANA have a check in this situation?
    Please throw some light on this.

    Hi Vishal,
    i suggest you to take a look to SAP HANA SPS03 Master Guide. There is a comparison table for the three replication technologies available (see page 25).
    For Multi-System Support, there are these values:
    - Trigger-Based Replication (SLT Replication): Multiple source systems to multiple SAP  HANA instances (one  source system can be connected to one SAP HANA schema only)
    So i think that in your case you should consider BO Data Services (losing real-time analytics capabilities of course).
    Regards
    Leopoldo Capasso

  • Creating multiple source systems one logical system

    Hi,
    The requirement is to create two source systems using same logical name and different RFC connections to ECC?
    We wanted to do some regular activities using one source system and some drill down activities using different source system.
    I am getting error when I try to create second source system "source system already exist"
    Please advice.
    Thanks.

    Hi,
    I dont think it is possible to create multiple source systems in a sinle logical client. You have to create multiple clients and you can connect to BI system by different RFCs.
    Hope this helps.....
    Regards,
    Suman

  • Modeling the Data model when multiple source systems

    Hi gurus,
    i have a scenario where i am getting data from multiple source systems all R/3 but from different locatins.
    my doubt is if i have to do reporting on the data available.
    1. do i have to build seperate infocubes for each source systems or build seperate data designs for each source system .
    2. How can i consolidate the different source sytems data into one and report sensibly as well as without loosing the source system identification.
    thanks and regards
    Neel

    Hi all,
    thanks for your focus, ya i am also thinking of have a flexible solution where in i can do it easily as well as we don't have much of complexcity, but wanted to try different options as well so that we can go for best one.
    I thought of multiprovider at first when RafB suggested, and i agree with you as well Lilly, that data volume will be a problem, so keeping all this in view i want to build a solution where in it will be sensible as well as not confusing in reports ( i mean clear and readable reports)
    [email protected]
    please kindly forward any documents which might be helpful for me in this scenario
    thanks and regards
    neel
    Message was edited by: Neel Kamal

  • Transformation issue while connecting multiple source system of same type..

    Hi,
    I'm working on APO-BW integration project. I want to connect BW QA & BW PROD to APO QA. I've already connected BW QA to APO QA & it is fetching data correctly. RFC part & other BASIS part is already taken care of. I've done export datasource (for mater data, cube etc) in BW PROD & replicated in APO QA. All BW PROD datasources are imported as RSDS (7.X) in APO QA.
    Now my question is how to make sure the transformations will take source system as BW PROD too? I want 2 datasources (one from BW QA & other from BW PROD) to connect to same inforprovider in APO. I've transported 7.x datsource from APO DEV to APO QA environment along with transformations. In conversion of logical system names in APO QA I've given source system -BW DEV & target system - BW QA. So the transformation automatically takes data source as BW QA. It doesn't take source-system - BW DEV & target system - BW PROD as it conflicts previous setting.
    Is only option that I need to manually maintain transformation from BW PROD datasource or there's another better alternative?

    HI,
    You are getting multiple IDOCs into BPM. But output you are getting one message right? IF so, your N:1 Mapping is not done correctly.
    i.e your target message type should have occurence of 1..n and also the interface mapping. Closely obsever the N:1 mapping done in the BpmPatternCollectMerge.
    Also go to SXMB_MONI->PE and check the Technical Details to make sure that, you are getting multiple IDOCs and you are executing the N:1 Transformation step correctly.
    Also in the N:1 Mapping, check out the context you used. Make it root .  Then test the mapping independently in the Integration Repository.
    Hope it helps,
    Regards,
    Moorthy

  • Transport Error: Source system  does not exist. Message no. RSAR203

    Hi,
    after transporting from BI_DEVELOP to BI_TEST  I get an error whil importing Datasources:
    Source system ERP_DEVELOP_SOURCESYSTEM  does not exist - Message no. RSAR203
    Which is upon the first sight correct, because I  got the followings systems, RFC's and BI Sourcesystem:
    ERP_DEVELOP -> BI_DEVELOP with RFC & Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_DEVELOP
    ERP_TEST -> BI_TEST  with RFC & Sourcesystem ERP_TEST_SOURCESYSETM pointing to ERP_TEST
    Can I map in the transport ( and how)  in a way that the transports do not fail ?
    ERP_DEVELOP_SOURCESYSTEM  to ERP_TEST_SOURCESYSETM
    or
    Do I need to setup in BI_TEST  a Sourcesystem  ERP_DEVELOP_SOURCESYSTEM pointing to ERP_TEST ?
    Thank You
    Martin
    Edited by: Martin Sautter on Jul 25, 2011 12:59 PM

    Hi Martin,
    You have to maintain the transport connection between your ERP_DEVELOP and ERP_TEST
    your transport path should be as below
    BI_DEVELOP    -
    > BI_TEST
    ERP_DEVELOP -
    > ERP_TEST
    1)Make sure you have FRC connection between BI_DEVELOP and ERP_DEVELOP, BI_TEST and ERP_TEST
    2)check you have transport connection between BI_DEVELOP and BI_TEST,ERP_DEVELOP and ERP_TEST
    Now you transports should not fail
    Hope this helps
    Regards,
    Venkatesh

  • Transport issue - Source system does not exist

    Hi at all!
    I've got a problem after transport from BW QA-system (EBW) to BW PRD-system (PBW). All transports got the same error message, that the Source System DEV500 doesn't exist. But DEV500 is the development R/3 system. How could it be? Because we didn't connect the DEV500 to PBW. We connected PRDCLNT100 (Productive R/3) to PBW. Where is the failure?
    Thanks in advance for your help.
    Christof

    Hi,
    DEV R/3 -
    > QA R/3 -
    > PROD R/3
    DEV BIW -
    > QA BIW -
    > PROD BIW
    Is the above one is your landscape? If so , you must had created the Transport requests in DEV BIW and imported them into QA BIW. And for that you had maintained the source system conversions in QA ABIW .
    Now you want to import into PROD BIW. And remember that the orgin(source) of the trnasport requests is DEV BIW. So you need to maintain the Conversions in PROD BIW for conversion from DEV R/3 to PROD R/3.
    With rgds,
    Anilk Kumar Sharma. P

  • Multiple source systems ?

    Hi all,
    What is the best possible answer/solution for the following scenario
    If I am extracting same data(datasource) from multiple (say 3)R/3 source systems ie the datasources too are same for example 2lis_40_S600, how can we model the architecture in BW?
    Should we have 3 infosources or just one.  If one then how?  Please let me know.
    thanks

    thanks Bhanu, you answered my question.  Actually I need to decide on that, I mean I need to analyze all the char and keyfigures in these three source systems and figure this out. 
    Since all the data from three source systems is going to one infocube, I can do the transformations in transfer and update rules.
    Another question about 0sourcesystem?
    If I want to have 0sourcesystem in my infocube then I should have one infosource for all the three source systems right?
    thanks.

  • Transport managment, source system changed in import

    Hi all,
    i faced with the need to change the source system in transport management. I mean, dev source system to assign a different test system source. now is the following:
    InfoPackage ZPAK_4MSK400H4M9FGMEKV9ZGDSN4M, source system LGDCLNT300 changed by source system LGTCLNT010 in import (tr STMS).
    I'm looking for opportunities to change the target source systems LGPCLNT010.
    Where can I find a setting to change the source system during the import?
    Thnx.
    PS LGPCLNT010 source system already exists in test. only need to assign LGDCLNT300 (DEV) -> LGPCLNT010 (TEST).

    Hi,
    The entries  are maintained in table RSLOGSYSMAP. Goto SM30 put the table name and click on maintain.
    Or simply goto transport connection from RSA1 and click on "Conversion button" on tool bar.
    Regards,
    Durgesh.

  • Transport of Source System assignment for a Virtual Cube

    Built a transport with the datasources, transfer rules, cubes etc..
    After transport to my Q system - in the Q system I am not seeing any source system assignment for my remote cube
    OBviously it exists in Dev
    Everythign else is fine - datasource, infosource trasnfer rules but nothing underneath the infocube where the source system normally is
    transport before and after in the transport conenctor picks up nothing to be transported
    Logical system mapping table in Q is fine (naturally - because the datasouces got there) - replicate all done
    Any ideas?

    hi Simon,
    check sap help
    http://help.sap.com/saphelp_nw04/helpdata/en/3b/63c620e18411d4b2d90050da4c74dc/frameset.htm
    The source system assignments are local to the system and are not transported.
    hope this helps.

  • Transport complete source system?

    We are duplicating one of our source systems (PRT). We already have a duplicate of our BI prod system (QBI). Can I transport the complete source system (PRT) from our prod (PBI) system to the duplicate (QBI)?
    Note that the duplicates (Qxx) has the same logical system name as the prod systems (Pxx).
    -AD

    Hi,
    The entries  are maintained in table RSLOGSYSMAP. Goto SM30 put the table name and click on maintain.
    Or simply goto transport connection from RSA1 and click on "Conversion button" on tool bar.
    Regards,
    Durgesh.

  • How to Load Master Data Text  from Multiple Source Systems

    Situation:  Loading vendor master (text) from two systems.  Some of the vendor keys/number are the same and so is the description.  I understand that if I was loading Attributes, I could create another attribute such a source system id and compound it to 0Vendor.  However, I don't believe you can do the same when loading text. 
    Question:  So, how can I load duplicate vendor keys and description into BW using the *_TEXT datasource so they do not overwrite?
    Thanks!

    Hi,
    Don't doubt, it'll work!
    Sys ID as compound to 0Vendor.
    If you doubt about predefined structure of the *_TEXT datasource and direct infosource, then use a flexible infosource. Maybe you'll have to derive the sys ID in a routine or a formula.
    Best regards,
    Eugene

  • Transaction Data from multiple source systems

    Hi BW,
    I want to load transaction data from two source systems: SQ1CLNT100 QA and SQ1CLNT200 Training client. into one BW system. What is the best practice, do I need to create another data structure or can I mix the data for QA and training in one data structure and separate them with authorisation?
    Please someone should help me out with the best practice on this.
    Thanx.

    Hi Dan,
    Do you mean use 0LOGSYS as authorisation relevant InfoObject?
    Dont you think that if I copy bid from one source system and use it in another, the two bids will have the same GUID? if that is possible, then I may be faced with the problem of data override. Please advice further.
    Regards.

  • Multiple source system issue...

    Hi,
    We have two source system for BW Development and one source sytem for BWQ and BWP.
    My query is: we have added two extra fields 0SOURCESYSTEM, 0FISCVARNT in the key fields to handle data from two different systems.
    Do anyone have any more suggestion to handle such a scenario.
    Suggestions will be highly appreciated.

    Hi,
    Incase if you are loading data from two sourcesytem ,you will have two data sources each representing one sourcesytem,then you can assign these to an infosurce with flexible update.
    now you can craete two info packages for each source sytem and can load the data to the target
    the steps may look something like this
    replicate datasource1
    replicate datasource2
    create infosurce
    assign datasource1 and datsource2 to infosurce
    maintain transfer rules
    under infosource
    later create Ip for source1
    create Ip for source2
    crate target
    create updaterules
    map the infosoure to update rules
    cheers,
    Swapna.G

  • How to load text data from multiple source systems.

    Hello Gurus,
    I am facing an issue of loading master data text into 0Material. I have loaded attribute data from 2 source systems. But i am not able load text data from the same 2 source systems as i am not able to see 0logsys in transfermation rules of 0MATERIAL.
    Please gimme some inputs to proceed.
    Thanks in advance
    Peter

    Hi,
    I dont think that you need the source system info here, texts are mapped to attributs and attributs to source systems.
    so try to load simply:
    material key, text, lang (optional)
    Hope it helps.

Maybe you are looking for

  • Mac Air does not recognize ISO file, Mac Pro does

    Hi All, My MacBook Air, i5, with OSX 10.9.4 and Bootcamp 5.1.2(484) does not recognize the Windows 7 ISO image, while my dad's Mac Book Pro, 10.1, i7 with OSX 10.9.4 and Bootcamp 5.1.2(484)...does recognize the Windows 7 ISO image... We tried two dif

  • Upload to FTP host doesn't work

    Hi all, I have made a website and uploaded it to FTP host via Muse and all worked fine. But I can't seem to find a way to do this with my second website. I insert the right information, and via FileZilla for instance, I can login with this informatio

  • Function Module for Opnning Balance

    Hello All, Is there any Function Module for getting Openning Balance of Customer and Vendor on a particuler Date. Point Assured. Thanks & Regards, Message was edited by:         SAPLOVER

  • Wrong result in multiplication

    Hi, everybody! I have a problem with a simple multiplication for which I have not found a solution yet. And I do just hope, that anyone here has encountered and solved it already. The problem is as follows: JW = (long)(Math.floor(SOLZJ*100)); JW is a

  • When I take a picture it saves it upside down

    help, it always saves it in my photo album upside down.