Transport not getting created for certain SPRO settings in Golden client
Hi,
Currently we are in the realization phase of the project ,we are in the process of configuring system in golden client.
For some SPRO configurations ,the system is not prompting for the Transport request.
Kindly let me know if anybody had gone through similar kind of issue.
Regards,
mmuser
Edited by: mm Keyuser on Dec 30, 2009 5:34 AM
Hi,
Please check for the configurational table for which you are facing problem, its delivery class should be "C" under delivery & maintenance.
You can get it checked by your ABAP team.
hope this will help.
Regards,
AK
Similar Messages
-
ChaRM transport not getting created
Hi Experts,
I am in SP20 EHP1. I am configuring ChRm flow. I have made the copy of SDHF to ZSHF. I have completed all the configurations. I have made the copy of all the actions & statuses.
I am having two actions in ZSHF while creating the transport requests as below.
Option 1: Click the standard action "Set in Development". (copy of standard action). At that time the transport is getting created successfully.
Option 2: Click the action "Create New Transport request" (Copy of standard action). At that time the transport is NOT getting created. Why i couldn't able create the transport using this copied action? In the transaction data tab ---> Actions tab, the details says that action "Processing HF_EXECUTE_ACTION Is Started" & @5C\QError@ Action could not be successfully executed
Note:
But if i use the standard transaction type SDHF, at that time using both standard actions, i could able to create transports.
Need your valuable inputHi,
Please check for the configurational table for which you are facing problem, its delivery class should be "C" under delivery & maintenance.
You can get it checked by your ABAP team.
hope this will help.
Regards,
AK -
Accounting doucment not get created for Credit Memo
Hi
When creating a cancellation doucment(vf11) for credit memo accounting document not get created.While I go for analysis then it is determining the G/L account.But not getting created the accounting doucment.
When i select "Release to accounting" then it is giving a message like this:
"Automatic clearing of billing document 951
and canc. doc. 90000572 not poss." as informatiion first
and then later it is throwing an error message that "maintain correct number range"
While for the same material or earlier cancellation happened and accounting doucment get created.
Please help me out;How would i get this solved?
Thanks in advanceHi,
You may also check for Number Range - Maintainance & Assignment.
T. Code: SNRO
Table/ View: RV_BELEG
Here, Mantain Number Range.
To Assign,
T. Code: SM30
T.Code: Bill_Num (or select if different in your case)
Assign No. range to your combination of Sales OrgDist.ChannelBill Type i.e. for Cancelled Billing Doc. Type
To Maintain Number Range for Accounting Documents,
T. Code: FBN1
Best Regards,
Amit -
Extension folder is not getting created for firefox 4 in Mac OS
in Mac OS 10.6, 10.5, extension folder is not getting created in the profile for the firefox 4.0. Where as in Firefox 3.6 when you launch the firefox first time, profile folder is created and extension folder is also part of that.
That extensions folder will only be created if there are extensions found that need to be installed. If there are no extensions then Firefox doesn't create an empty extensions folder.<br />
On Windows there is a lot of security software that installs extensions globally.
* https://developer.mozilla.org/en/Installing_extensions
* https://developer.mozilla.org/En/Developer_Guide/Customizing_Firefox
* https://developer.mozilla.org/en/Adding_Extensions_using_the_Windows_Registry -
Inspection lot not getting create for 01 Insp type after Intransit
Hi Qm Gurus,
I have a Material 'A' which is producing in the plant IN05 and transferring to IN06 plant. We have Scheduling agreement PO for this. After Scheduling Agreement we are doing Transferring the Goods thro 351 GI Movement type. So now the parts will be there in transit.
So now when I receive this goods in IN06 thro 101 MT, Insp lot is not getting create, it goes to Unrestricted. If I create a std PO for the same when I receive the goods thro 101, it is posting into Insp lot. But after 351 & if I do 101 material is not going into Inspection. Pls advise.
I checked the Insp type 01 Active for IN06, Quality info record is fine, Quality plan also fine. Pls let me know whether i am missing something?Hi ,
Please activate inspection type 08 stock transfer ..
If this inspection type is active then during stock transfer lot gets generated.
Also check QM active for this perticular movement in custamizing setting.
Regards
SANIL -
Spool list is not getting created for background job
I am creating background job using JOB_OPEN and then submitting my z-report using submit statement and then closing job using JOB_CLOSE. for this job is getting creating in sm37 and also gets finished but it does not create spool list showing output.
Any idea how to do this?
Thanks in advance.DATA: lv_jobname TYPE tbtcjob-jobname,
lv_jobcount TYPE tbtcjob-jobcount,
lv_variant TYPE variant,
wa_var_desc TYPE varid,
wa_var_text TYPE varit,
it_var_text TYPE TABLE OF varit,
it_var_contents TYPE TABLE OF rsparams.
REFRESH: it_var_contents, it_var_text.
CLEAR: wa_var_desc, wa_var_text.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = sy-cprog
TABLES
selection_table = it_var_contents
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CONCATENATE sy-datum sy-timlo INTO lv_variant.
wa_var_desc-mandt = sy-mandt.
wa_var_desc-report = sy-cprog.
wa_var_desc-variant = lv_variant.
wa_var_desc-transport = 'F'.
wa_var_desc-environmnt = 'B'.
wa_var_desc-version = '1'.
wa_var_desc-protected = 'X'.
wa_var_text-mandt = sy-mandt.
wa_var_text-langu = sy-langu.
wa_var_text-report = sy-cprog.
wa_var_text-variant = lv_variant.
lv_jobname = lv_variant.
CONCATENATE 'Batch Job Variant -'(006)
sy-uname INTO wa_var_text-vtext.
APPEND wa_var_text TO it_var_text.
Create the varaint for the back ground job.
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
curr_report = sy-cprog
curr_variant = lv_variant
vari_desc = wa_var_desc
TABLES
vari_contents = it_var_contents
vari_text = it_var_text
EXCEPTIONS
illegal_report_or_variant = 1
illegal_variantname = 2
not_authorized = 3
not_executed = 4
report_not_existent = 5
report_not_supplied = 6
variant_exists = 7
variant_locked = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Open the job.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = lv_jobname
IMPORTING
jobcount = lv_jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
submitt the job in background mode.
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
authcknam = sy-uname
jobcount = lv_jobcount
jobname = lv_jobname
report = sy-repid
variant = lv_variant
EXCEPTIONS
bad_priparams = 1
bad_xpgflags = 2
invalid_jobdata = 3
jobname_missing = 4
job_notex = 5
job_submit_failed = 6
lock_failed = 7
program_missing = 8
prog_abap_and_extpg_set = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
close the job.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = lv_jobcount
jobname = lv_jobname
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
invalid_target = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope this will be helpful.. -
Profile class not getting created for new site for existing customer.
Hi,
I am creating a new site address for an existing customer using Customer Interface in oracle apps 11.5.10.2. The issue is the profile class is not getting assigned correctly at site level. It is getting defaulted with the profile class of the customer. Below is the data that I am inserting in RA_CUSTOMER_PROFILES_INT_ALL
INSERT INTO ra_customer_profiles_int_all
(orig_system_customer_ref
,orig_system_address_ref
,insert_update_flag
,customer_profile_class_name
,credit_hold
,org_id
,last_updated_by
,last_update_date
,created_by
,creation_date
,last_update_login
)VALUES
(x_orig_system_reference -- This is old customer reference as he already exists in the system
,x_address_ref -- This is a new address reference
,'I'
,rec_cust_det.customer_profile_class_name -- In the file I am giving it as 'ABC1' but it is getting defaulted with 'DEFAULT' which belongs to customer profile class at the header level
,'N'
,fnd_profile.value('org_id')
,fnd_global.user_id
,SYSDATE
,fnd_global.user_id
,SYSDATE
,fnd_global.login_id
Can anyone please help me how to resolve this issue. Hope you understood. Otherwise please let me know.
Regards
DevPlease apply patch 4649221 to get this work.
Regards
Dev -
One Step GI - GR is not getting created for an STO
Good Morning All,
Actually we have made a setup that whenever we create a Goods Issue for STO type (UB - PO ) in the supplying plant we are creating the GR in the background . WE have made the configuration in SAP R/3 version 4.6c with One STEP Movment, that is when we create the GI (351 ) movment then GR (101) should be created automatically. Actually its not working properly. And sometimes it creates the GR with the USer as WF-BATCH.
Let me know where exactly I need to check for the failure.
In such cases if there is error in the background process, means, is there any transaction where it shwos the authorization or other failures happened to the system.
Advance thanks....
regards,
Sabari Prabhu.Dear Venkadesh,
Which Batch job should i need to check for this.Because I am not seeing any batch job relatred to that.
Regards,
Sabari Prabhu. -
Not getting notifications for certain apps
Recently, my Iphone has stopped sending me push notifications from certain apps.
I checked the notification center, and all the apps in question have the right permissions. To be sure, I checked them all off and on again, but nothing changed.
I deleted each and restarted my phone before reinstalling them, but still nothing.
I'm running the most up-to-date version of iOS7, and the problem has only come about recently ( before and after the recent system update too) ; I was using iOS7 for months before this, so I'm certain the OS itself isn't the issue. Should I back up my phone and restore it?my iPhone 5s has stopped receiving calls and apps like safari or health or tips or podcasts as well as Siri is not even responding. I would realize I had a call after the missed call notification pops up. The calendar on the home page no longer shows the date and the analog clock on the home screen has frozen as of the time of the upgrade to ios8. At this point the phone is not of any benefit.
-
Delivery not getting created for Stock Transfer Purchase order
Hi,
My user having one issue with stock transfer order. User is not able to generate the delivery for the particular material against stock transfer PO. Here checking rule is not maintained.Kindly advice.Hi
Please, see SAP Note 498143 - FAQ: Stock transfer with delivery in purchasing.
I hope this helps you
Regards
Eduardo -
ERMS : Email work items not getting created
Hi Forum
In my test system (CRM 2007), inbound mails were properly coming in and getting distributed to agent's inbox. But after the server restart, I realised that the work items for inbound mails stopped getting created due to which mails are not reaching agent's inbox.
Mails are visible in SOIN but their associated Work items are not there in SWI1.
I have checked almost all the settings like Email Distribution (SO28), CRM_ERMS_WF_CUST (Event lining is in place and is active), swu0 (Event simulation is working).... but still not sure why work items are not getting created for inbound mails.
Any thoughts ? Help will be deeply appreciated.
Regards
Vishal ManiThanks Bruno for your time to reply !
I checked this transaction and in overview there are 19 events with errors. But apart from that everything is green.
I checked the Linkages with Error tab and realised that the events with errors belong to object type BUS1006.
In Activation tab --> Linkages --> Object type (ERMSSUPRT2) --> Linkage is activated.
Infact that is the first thing, I checked when work items were not getting created.
So no clue from here too.
Regards
Vishal Mani -
Required attribute not getting created
Ok, here is a wierd one.
I have some custom ID management code (an SSO plug-in cert mapper and a WAR file I deploy to OC4J_SECURITY). The application provides a registration process that creates user entries and RADs for Oracle Forms app users. Everything works fine, except that I have found that my RAD creation does not get the orclresourceviewers attribute created automatically.
This has worked in my IM development farm. The attribute would be created automatically. It was difficult to figure out this was the reason my Forms App Server would fail with the following exception.
oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
I have gone through the motions of now preparing to query the OID Forms ID so that I can fill in this attribute in my RAD creation class. I still would like to know why this attribute is not getting created for me anymore.
Any ideas?
Oh and BTW, it did not help that orclresourceviewers is not documented anywhere I could find (not OID Admin and not Forms Deployment Guide)
regards,
ttHi Sandeep.
Yes, my application entities that I set up to manage a specific realm are used to create all RADs in a particular realm. As part of the setup for this I add these application entitites to the following three realms:
cn=OracleDASAdminGroup,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=RealmAdministrators,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=UserProxyPrivilege,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
I add to these so that the app entity could create, modify, delete and proxy to any realm user. I had to create an ACI to allow my entities to search and see the Forms Server application entity entry in order to populate orclresourceviewers.
I just wish I new why orclresourceviewers does not get created automatically. Of course, if I create the RAD in DAS or using the Oracle DynamicResourceCreate option, it is added. It has added it in my own RAD creation code at one point and it stopped for some reason.
I had to add an LDAP search to my RAD creation code with the possibility of multiple Forms Server entries (Logical Application Group) just in case. Much ado for something that maybe should not have been necessary.
regards,
tt -
Transport Request Not getting created automatically
Dear Sir,
We are facing a problem related to , Transport Request not getting created automatically during the SPRO change activities . We have to manually create the Transport Request and then changes need to be included in the request individually on the manual basis .
However earlier , we had no such problem and Transport Request were getting created perfactly .
We request you to kindly help us on this issue pl .
Rgds
Sonia AgarwalHi Sonia,
This is purely because of the client settings. Your client settings are in such a way that the cghanges are not getting captured. As mentioned by Naveed, check to see the client settings and change the settings if needed.
FYI: The SandBox clients will have the client settings as in ur system now.
Regards,
Varadharajan M -
Sales Orders not to be created for certain customers via legacy
Hi,
We have an inbound interface from legacy into SAP which creates Sales Orders in SAP. But we have a requirement where the business does not want sales orders to be created for certain customers in SAP via the interface.
To prevent the sales orders from being created for those customers via the interface, we have created entries in the look-up tables (Hope other projects also use lookup tables and are aware of what are look-up tables). But still the sales orders are being created in SAP for those customers via the interface.
What else should we do to prevent the sales orders from being created for those customers.
Thanks in advance.
MickHi ABAP gurus, need your help on this one. Any help would be greatly appreciated.
-
Reservation not getting created from shopping cart for stores order.
Hi experts,
Reservation not getting created from shopping cart for stores order,process used is some custom BADI.Extended classic scenario is the procrss .
Please help me
Thanks in advance.Hello,
please check below wiki:
Determination of the follow-on document type
Regards.
Laurent.
Maybe you are looking for
-
I just started with a new Co. And they send e-mail attachments as winmail.dat When I open I get junk. I've gone into applications in Options but all form still give me junk notebook ect... Any suggestions
-
Recorded Audio Not playing back in Premiere Pro
I use Dxtory to record; Sound from system as well as mutual programs such as skype all playback as intended. The audio from my microphone, though it plays back when reviewing it in a media program, is not present when I import it into Premiere. Still
-
Enhancment MM06E005 : Screen Size
Hi, I am using Enhancement MM06E005 for Custom fields in Contract (Outline agreement) . I have created the field in Sub Screen : SAPLXM06 0201. In the contract the Size of the Screen displaying as only 3 Lines. I have almost 50 Fields in the scre
-
When I restore my mac in time machine, does it restore drive partititions
OK so heres my story. I had XP on a partion on my mac running through boot camp. I didn't have any vital information so I decided to just delete the partition and start over with windows 7. I deleted the partition with disk utility instead of the boo
-
Need help converting a document to pdf
I have an active account and want to convert a word document to pdf but can't because I received a message to contact support. How can I get in contact with a live person?