Transport number ranges to production server of withholding tax

Hi
I have created the number ranges in the development server and saved in one request, but the number ranges are not working in Production system. How can i again transport the same request in production system.
I tried to transport it again but it is showing in grey mode.
Thanks

Number ranges are suggested to be maintained directly in the production client.
Even if you want to transport, Go to SE01 and check that your trans then port include the number range you want to transport.
Regards,
SDNer

Similar Messages

  • Number ranges in production server

    I have created the following number ranges in production server
    $$$$     IN     EX
    $$C     IN     EX
    $$O     IN     EX
    $$S     IN     EX
    $$$$
    EX     00000001     49999999     0             (External checked)
    IN     50000000     99999999     50000024
    $$O
    EX     20000000     22999999     0 (External checked)
    $$C
    EX     30000000     32999999     0 (External checked)
    $$S
    EX     40000000     42999999     0 (External checked)
    But when I created the org unit it is taking internal and the number is assigned 50000000.
    I want all the org units to be 20000000 to 22999999 and external.
    How should I do it?

    Hi,
    For org units if you require the  ID to belong to the external number range, you will need to specify the ID of the org unit and then hit CREATE.
    If you do not specify the ID, it will take the next number available under the default internal number range which is
    $$$$
    IN 50000000 99999999 50000024
    Hope this helps.
    Regards,
    Shreyasi

  • How to transport number range group Configuration in Material Master

    Hi,
    I have this query regarding how to transport number range group in material master from one server to another.
    Problem: There was no number range assignment done for a particular material type. So, i assigned the particular mat. type to a group which had some number range intervals with the help of T-Code MMNR.
    But when i want to transport this config. to other sever, it is only transporting the interval but not the assignment done to that group. In the menu bar only Interval transport option is there.
    Can anybody help me with this I hope the query is clear.
    Regards
    Vivek

    Hi,
    Number range objects can be transported using Workbench requests.
    Thanks
    Kishore

  • Transport Number range intervals

    Hi,
    I have created a custom number range with intervals (from & to number range values) i need to transport this to production and unit testing boxes. how to create a transport for this.
    and also it is advisable to transport number ranges?
    Thanks
    Sa_R

    Hi,
    Thanks for your reply.
    But my doubt is , the number range is newly created. have 250 subjects inside , User already maintained the intervals in the config box. So i need to transport this higher box. If i am transport this , whether all other number ranges get deleted? including SAP standard also?
    Thanks
    Sa_R

  • Message while creating plant,Do you really want to transport number ranges?

    hI
    while creating plant[Copy from existing] i got the message 'Do you really want to transport number ranges?'
    can some one through some light on this message
    Thanks

    REad carefully the info coming along with this message.
    IF you transport number ranges, then you overwrite existing number ranges in your production system. you transport the e.g. the current number from your development system into production and overwrite there the current number.
    As you usually produce less data in Development system than in a production system, the current number will be smaller after the transport, and SAP would then try to create data using the next number, which leads to a dump as thereis already a record in the database having this number.
    so you should only transport number ranges if you do not effect existing number ranges in your production system.

  • ZTABLE TRANSPORT WITH CONTENTS TO PRODUCTION SERVER

    Hi Friends,
    I had created a ztable in Developement server with 3 fields including MANDT field and added 15 records to that table.  (MANDT = 500).
    When I transport to QA Server, the data entered in the development server, are not visible.  Again I entered the data in the QA server with MANDT = 150.
    Later, I transported the table to Production server. Again here also no data found.  When I tried to add entries,  the system throws the following message :
       "The System Settings Do Not Allow Any Changes".
    Please let me know what step I have missed out.
    Also let me know the following :
    1. How to transport a ztable from Devlopment server to QA/Production server with all the data.
    2. How to add new entries in Productin server.
    Thanx in advance,
    A S VINCENT

    Hi again,
    1. Function group 
       (create an empty function group in
       new session thru se80 tcode,
       and mention it here)
    2. Authorization group
       Just check out using F4
       if some Z* or Y* is avaialble or not
       (If not , ask basis team to
       create on Z/Y authorisaton group,
      and mention it here)
    3. Choose radio button ONE STEP
    4. In overview screen text box
       , just enter 1000
    5. Just enter the above fields,
      and press CREATE.
    regards,
    amit m.

  • TRANSPORT Z-TABLE TO PRODUCTION SERVER.

    HI,
    I'VE CREATED ONE Z-TABLE,EVEN THOUGH THE Z-TABLE CONTAIN NO DATA ,WHEN I'M TRANSPORTING THIS Z-TABLE FROM DEVELOPMENT SERVER TO PRODUCTION SERVER IT IS GIVING THE ERROR
    KAY MESSAGE TABLE ZPF_DETAIL 2002007011004
    ENTER NUMERIC VALUES ONLY
    HERE 200-DATA OF MANDT FIELD
              2007-YEAR
              01-MONTH
             1004-PERNR
    WHICH I'VE ENTERED PREVIOUSLY,BUT NOW THIS TABLE CONTAIN NO DATA.
    PLEASE SUGGEST ME WHAT TO DO TO TRANSPORT THE TABLE TO PRODUCTION SERVER.
    PLEASE HELP ME,IT'S URGENT.
    THANKS
    SUJATA
    Edited by: Sujata Swain on May 8, 2008 6:53 AM

    Hi,
    After creating the table first activate the table
    Check whether  Delivery and maintenace
    and  Technical attribute tabs are maintained.
    Once that is done transport that request to production.
    To maintain the table in production you will have to create a maintenance view for the same

  • Transporting Number range Intervals

    Dear SRMers
    System Information: ECC 6.0,
    We created Z Number range objects in ECC system A and transported them to ECC System B.
    The custom objects were transported, but the number range intervals did not transport to the target system. My question is do we need to transport the number range intervals for the custom objects seperately?
    Points will be rewarded for answers.
    Thanks in advance,
    Best Regards,
    Bob

    Hi,
    Usually best practice is to not transport number range but to recreate it in the target system.
    However, technically it is possible.
    Kind regards,
    Yann

  • Plantwise separate number range for Production order

    Hello SAP Expert,
      I my project our client require plantwise number range for Production order,order Confirmation for indentifiction purpose .
       Please give way to do this.
    Thanks in advance.
    Regards,
    Yogesh.

    Hi,
    As per standard SAP not possible because Order types are maintain at Client level and not at Plant Level, but as Sukender said use Different Order Types for different Plants.But I guess user will face one problem often during Manual Production / Process Order Creation , and that is if they select wrong order type then face a problem like no Order type dependent Parameter set for required Plant.
    Regards,
    Dhaval

  • Number range of product group

    Dear all
    where we define the number range of product group?
    Rgds
    Avinash

    Hi,
    T.Codes:
    MC84 - Create Product Group
    MC85 - Display Product Group
    MC86 - Change Product Group
    CX5U1- Product Groups
    CX3FF-Copy Product Group
    Table:
    TF580
    I don't think It has number range:
    Rewards if helpful.
    regards,
    Chintan

  • Number range for Production order

    Dear All SAP PP Gurus,
    I am new to SAP PP and want to learn about number ranges for production order.
    Can anyone tell me step by step procedure for creating & Assigning
    number range.
    Thanks in advance.
    Regards.

    Hi MIHIR,
    I just chkd the blog spot of MR Siva.
    It is very much self expalnatory.
    Siva ,pls update more documents in ur blog,it is very much helpful
    THNX all

  • Number Range for production order / Planned order

    Number Range for production order / Planned order depends upon what?
    Plant, order type, mrp controller??

    Dear,
    Number Range for production order :- Client Specific assign to the order type You can check in CO82 and OPJH.
    Planned order  :- Plant specific OPPQ or OMI2.  Number ranges for Manual creation - OMI3
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Transporting error!  While transporting Number Range Object

    Hi All,
    Thanks in Advance.
    I have created a Number Range Object(Not a interval range) in Development Box(SNUM). (We have 2 production box) I transported the Number Range object to 2 production box.
    Number Range Object Transported successfully for one box. But It is not getting transport into other box.
    Could you please help,  to solve this problem.
    is there any configuration?
    <b><u>Error Log Detail.</u></b>
    ADO import (12) Cancelled
    Log generation messages ....................................... (000-999)
    Log generation messages ....................................... (000-999)
    Ended with return code: ===> 12 <===
    Deleted from buffer ( Ended with errors )
    I don't know, how to resolve this error.
    Thanks Again!
    Regards
    Anand

    Hi,
    Please refer to the SAP note : 132020
    Symptom
    With the import of a transport request or the import of a patch with the SPAM, tp terminates during the ADO import with return code 12.
    In the ADO import log file of the request, cancelled jobs are refered to. With transaction SM37, you can find a cancelled job, suitable for the import RDDDIC1L, in the job log with one of the following messages:
    ABAP runtime error: ASSIGN_OFFSET+LENGTH_TOOLARGE
    ABAP runtime error: Exclusion criterion "RDDDR310_ERR02" initialized
    Additional key words
    Cause and prerequisites
    The ADO data file was not generated locally on a transport domain computer, rather it was, for example, transported with ftp and unpacked from out of an archive with CAR.
    Solution
    One cause could be that the data file for the ADO import was not transferred correctly. To check this, the following derivation steps are required:
    Start the operating system command 'R3trans -l <Datenfile>' and check whether the data file for the ADO import is corrupt.
    Assumed that a transport request is called C11K900123, the respective ADO data file D900123.C11 is also like this and stands in the subdirectory 'data', in the transport directory.
    Compare the size of the data file in the transport directory with that of the original file. The size must be identical.
    If a check shows that the data file is corrupt, transfer the data file again.
    Award points iff it helps.
    Regards,
    GSR.

  • How to transport infoset query to Production serveR?

    when i transport everything is transported to production server. when i run the transaction in production server it shows me the error saying . PROGRAM Does not exist .. how to resolve this..
    can any one help me to transport my infoset query from step-to-step.
    Regards
    Saad Nisar

    Well there is no button as such.
    I hope you must have found the Transport button.
    When you click it, it gives selection screen there you can find the redio buttons.
    Export will create a transport request and Download will download it to local machine.
    Let me know if it doesn't work. But you have to do more analysis as to how to go this way.
    Regards
    Shital

  • Prefix Number range: Transport number range

    Hi All,
          Here is the situation. there are 2 dev servers. the prefix number range in both are maintained as 901 . The workflows will be trasported to a single prod servers. Now as i understand this will create some trouble in prod coz two workflows in two system might have the same number.
          Now I think maintaining different number range might help. but when transporting to prod how willl this number range will be taken into account. I mean how to make sure that 901 will be transported as 901 and same as 902 range? Do i need to maintain some config in prod system or just reserving both the number ranges 901 and 902 in prod will solve the issue? Just need some confirmation ..
    Thanks in Adv !
    Anuj Sethi

    Exactly. The numeric ID that is assigned to your workflow template follows it through the transport system in the same way that the include for a function module follows it.
    The difference between workflow templates and reports (in this matter) is that you are not allowed to define the program name of the workflow template. Instead it is composed from the prefix and the next available number in that prefix range.

Maybe you are looking for

  • Firefox nexer versions keeps making my mouse hang and keep crashing. same settings on v4 is worling great.

    Ok so it started few days ago( when v 15 was new version), 1) firefox lasted at max a minute before crash saying firefox encountered unspecified error and will exit. Then the send crash report box would open. 2) When it was working; my muse kept hang

  • How to loop through CSV file

    Hi, I want to loop through each column of a CSV file. And while looping each column, I want to loop each row starting with the 2st row. I wrote the code as below, but it is looping through the rows starting from row 1. How do I make it start the loop

  • Export and keep date shot

    Hello, I'm a new Aperture user and am loving it so far. However, I can't figure out how to get Aperture to export files and set the exported file to the date and time the picture was taken. Is that possible? Is there an a plug in that will help? Than

  • Forcing JFrame to lose its focus programatically

    Hello everyone, I have a JFrame with a button over it. Now I wants that when I click on the button, my JFrame should lose its focus. Can anybody tell me whether it is possible in java or not? Thanks in advance.

  • Submitted form emtpy under Acrobat Reader 9 (Mac OS X only)

    Hi I have a problem sending a form by a submit button (also by scripting) to a webserver. I'd like to submit the form as a PDF (not FDF or anything else). I either used a submit button or code like below: > this.submitForm({ cURL: "sample.org/inbox",