Transport OBN Configuration in Portal

Dear All,
I want to know about how to transport the OBN (Business Object) configuration from one portal to another portal. Is there any specific steps need to be followed like Portal content transport. I searched in SAP Help but i didn't get any idea. I am working in EP7.0 EHP1.
Please share your idea.
Thanks & Regards
Prakash T

Hi Prakash,
I would suggest you to use portal export functionality
System administration >> Transport >> Transport Package >> Export >> Portal Content >> right click and "New Transport Package"
Inside this transport package you should ensure you are exporting the Business Object, OBN source(iview that is triggering the OBN navigation) and OBN targets(from each OBN operation you are able to check the targets).
In order to ensure you are selecting the correct business object you can do the following:
Go to Content Administration >> Portal content >> Search tab
put here the information in following format:
<system_alias>.<business_object_name> (it is Case sensitive)
Then select "business object" as object type and press "search"
From the results you can right click in the result and "Locate in portal catalog"
Then you can add this object to your transport package.
After importing this content you should be able to use the OBN successfully there.
Thanks and Regards,
Sowmya K

Similar Messages

OBN configuration not transported to QA

I am using standard iViews which have OBN configuration. OBN configuration was missing so i had to add it manually as per an SAP note.
teh issue I am having is that, after transporting the iViews to QA, my OBN configuration is not available in QA.
how can I transport my OBN configuration? is there is specific transport setting for OBN?
We are using SAP Portal 7 EnhP1 with ECC 6 EnhP4.
regards,
Tiberiu
Edited by: Tiberiu Sasu on Mar 28, 2011 4:39 PM

Hello Tiberiu,
For the missing OBN -> did you add iViews under Navigation Node in the Role where it was missing.
If the added iViews were part of the standard collection - no need to transport iViews. If not add the custom iViews and modified Role to the content transport. This should solve the issue.
Cheers Dhanz

Webinar: Change Management and Transport in the Enterprise Portal

SAP NetWeaver Know-How Network Webinar:
Change Management and Transport in the Enterprise Portal
Wednesday 21 July 2004
11 a.m. EDT
On Wednesday 21 July, Scott Jones hosts the webinar titled Change Management and Transport in the Enterprise Portal as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Scott describes his webinar presentation:
Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments. This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting. We'll also look forward to Change Management enhancements coming with Netweaver 04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hello,
In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
SAPnote 727180 - Version of PAR File in Manifest File
denies this.
Can you clear this out?
Kind Regards
Koen Van Loocke

How to Configure Multiple Portal Middle Tiers with a Load Balancing Router

Hi,
Portal version trying to install 10.1.2 on Windows 2003 boxes.
I am following the guide http://download.oracle.com/docs/cd/B14099_19/portal.1012/b14037/cg_advnc.htm#i1046354. I have InfraStructure installed on a different box and am trying to install 2 Portal Midtiers each on separate boxes and using LBR. The above document is kind of confusing as I am trying to following
5.3.1 Step 1: Install a Single Portal and Wireless Middle Tier (M1)
5.3.2 Step 2: Configure OracleAS Portal on M1 to Be Accessed Through the LBR (AND FOLLOW ARE THE STEPS 1 to 14 in sequence)
if I follow 1 to 14 steps in sequence the information is not consistent what is being listed in the following sections
5.4.1 Create Virtual Hosts
5.4.2 Configure OracleAS Web Cache
5.4.3 Register OracleAS Portal with OracleAS Single Sign-On
i.e.
ptlconfig -dad portal -sso -host www.abc.com -port 7779
ptlconfig -dad portal -sso -host www.xyz.com -port 7779
as in the above steps it says to run
ptlconfig -dad portal -wc -site
and ssoreg command that always fails because I am running it from midtier as it gives error saying invalid username/password
as oppoesed to steps listed in point 8, 9, 10, 11 and 12.
Can someone please privide the steps in sequence I need to follow when installing 2 midtiers with frontend LBR and one infrastructure. I am trying to follow the architecture listed in the above link.
Any help is really appreciated.
Thanks

Hi,
Will appreciate any inputs on the following.
I am planning to install Infrastructure and one Midtier BI Forms Reports Discoverer, Portal on one windows box and the second midtier BI Forms Discoverer, Portal on the second windows box.
Please correct me if I am wrong on installing and configuring the mid-tiers as following are the steps I have compiled going through the document and want to make sure this time I do it right.
As I'll be installing BI Forms Reports Discoverer, Portal so wondering when I install the second midtier do I need to unselect all Portal, Forms, Reports, Discoverer or just the Portal I need to unselect.
Also in the host file of both the windows boxes do I just need to keep the LBR IP Address entry and remove the rest.
LBR:_
Computer Name: bigip5.prd.com
IP Address: *167.123.2.5*
Listen Port: *80*
Invaidation Port: *9401*
Infrastructure:_
Computer Name: portal1.prd.com
IP Address: *167.123.2.6*
Oracle HTTP Server Listening Port: *7777*
Application Server Control port: *1800*
M1 (Portal & BI Forms Reports Discoverer):_
Computer Name: portal1.prd.com
IP Address: *167.123.2.6*
Oracle HTTP Server Listening Port: *7778*
OracleAS Web Cache Listening Port: *80*
OracleAS Web Cache Invalidation Port: *9401*
OracleAS Web Cache Administration Port: *9400*
Web Cache Statistics port: *9402*
Application Server Control port: *1810*
M2 (Portal & BI Forms Reports Discoverer):_
Computer Name: portal2.prd.com
IP Address: *167.123.2.7*
Oracle HTTP Server Listening Port: *7778*
OracleAS Web Cache Listening Port: *80*
OracleAS Web Cache Invalidation Port: *9401*
OracleAS Web Cache Administration Port: *9400*
Web Cache Statistics port: *9402*
Application Server Control port: *1810*
First to create MetadataRepository and then Install Infrastructure and then follow the below steps to install Midtiers
Install and Configure of M1 (Portal and BI Forms Reports Discoverer):-_
*5.3.1 Step 1*: Install a Single Portal and BI Forms Reports Discoverer (M1 i.e. portal1.prd.com)
*5.3.2 Step 2*: Configure OracleAS Portal and BI Forms Reports Discoverer on M1 to Be Accessed Through the LBR
*1.* Configure LBR
*2.* Follow Section 5.4.1.1 to create the Virtual Host for bigip5.prd.com (LBR) and portal1.prd.com (M1)
*3.* Define a site that matches the virtual host entry for bigip5.prd.com (LBR) on Webcache of M1
*4.* Use OracleAS Web Cache Manager on M1, to map the site bigip5.prd.com (LBR) to middle tier portal1.prd.com (M1).
Follow steps 5 and 6 as per the document
*7.* Configure bigip5.prd.com (LBR) to accept invalidation requests from the OracleAS Metadata Repository on a separate port i.e. 9401
*8.* Change iasconfig.xml on M1
*9.* run ptlconfig -encrypt
*10.* Register the URL changes with OracleAS Portal by running ptlconfig -dad portal -wc -site
*11.* No need as it is http only
*12.* Run the follwoing
MID_TIER_ORACLE_HOME_M1\sso\bin\ssoreg.bat
-site_name bigip5.prd.com
-mod_osso_url http://bigip5.prd.com:80
-config_mod_osso TRUE
-oracle_home_path MID_TIER_ORACLE_HOME_M1
-config_file MID_TIER_ORACLE_HOME_M1\Apache\Apache\conf\osso\osso.conf
-admin_info cn=orcladmin
-virtualhost
*13.* Edit targets.xml to enable monitoring of the LBR's front-end host and port settings for OracleAS Portal
+<Property NAME="PortalListeningHostPort" VALUE=http://bigip5.prd.com:80/>+ and then run
MID_TIER_ORACLE_HOME_M1\bin\emctl reload
*14.* Test the setup
Install and Configure of M2 (Portal and BI Forms Reports Discoverer):-_
*5.3.4 Step 4*: Install a Single Portal and BI Forms Reports Discoverer (M2 i.e. portal2.prd.com)
*1.* As I am installing on wiondows so will not set IASCONFIG_LOC environment variable as I can just copy the iasconfig.xml file from M1 to M2
*2.* Run OUI on M2
*3.* Clear the selection for OracleAS Portal but don't know if I need to unselect Forms , Reports, Discoverer also.
*4.* Enable OracleAS Portal
*5.3.5 Step 5:* Configure the New Middle Tier (M2) to Run Your Existing Portal
*1.* Create both virtual hosts as done on M1
*2.* Copy dads.conf, oradav.conf, cache.conf, web.xml from M1 to M2
*3.* Re-register mod_osso on M2. To do this, perform the following steps by copying osso.conf from M1 to M2
*4.* Synchronize the DCM by using the following command
MID_TIER_ORACLE_HOME_M2/Apache/Apache/bin/ssotransfer MID_TIER_ORACLE_HOME_M2/Apache/Apache/conf/osso/osso.conf
*5.* Run dcmctl updateConfig
*6.* add the necessary mod_rewrite and mod_oc4j directives to the httpd.conf and mod_oc4j.conf files respectively
*7.* Restart Oracle HTTP Server on M2
*8.* Access the OracleAS Web Cache Manager on M1 and follow steps 9,10,11,12,13,14,15,16 for Webcache seetings and clustering.
Also will appreciate if can get some info on the following:
*1.*
When I configure the Webcache as per the Document but if I bring down one Midtier Instance the requests are not going to the other Instance that is up and ignores the case whether an instance is down. Any idea how what and where do I need to provide any setting which in case of instance is down routes the requests to the one that is up.
*2.*
What exactly happens when it says To enable monitoring of the LBR's front-end host and port settings for OracleAS Portal edit target.xml. Is this for LBR to find if an Instance is down or not and route the requests appropriately.
Thanks again for all the help.

Error checking transport group configuration in System BQS

Hi Everyone,
I made a client export from Production to Quality. It went successfully,, I noted the requests numbers and transported them from PRD to Quality, but while transporting there was a tp error(which i did not note), next i went to the quality import queue and saw all the 3 requests had come. But when i click the adjust queue icon im getting the following error message "Error checking transport group configuration in System BQS" . Afterwards i tried to delete the requests from quality to retransport from production but still im not able to delete those requests from quality. Can anyone help me solve this.
Regards,
Rahul

Hello Rahul,
regarding the error message:
"Error checking transport group configuration in system"
It's mostly related to the TMSADM RFC destination. Kindly follow the below mention steps:
1. Logon to client 000 with user DDIC.
2. STMS > System > Overview > Select the system in which you are logged in > Click on the menu says EXTRAS > Generate RFC Destinations
Perform the above steps in all the systems configure in your TMS. This should resolve the issue.
Best regards,
Tomas Black

Help required for MSS configurations on Portal

Hi Experts,
Can someone please send me Portal Configuration guide or some kind of document on how to configure MSS --> Overview and Organisation services. Do I need to pass any parameters or any other configurations required?
Please help me.
Earlier responses would be much appreciated.
Thanks
Uday

Hi uday,
Please find the below links
MSS Configuration within SAP Portal: Organization Structure
ESS/MSS configuration in Portal as a part of HCM
http://help.sap.com/erp2005_ehp_04/helpdata/EN/14/1a6493d09849448a0537ee6727e799/frameset.htm
Hope it helps...
Thanks,
Rahul.

The TMS configuration is inconsistent and The transport route configuration

Hi,
I logged on domain controller in STMS in QA. I can see the following in STMS as
" The TMS configuration is inconsistent
The transport route configuration is inconsistent"
Users were able to do transports and there were no issues.
Transport routes
DEV>QA>PRD
TST(which is not active)
Environment:
Oracle: 10.2.0.4.0
Windows NT
Netweaver 70 ehp1 abap
Please guide me how to resolve the above issue.
Thanks and Regards
Satya

Hi,
Everything is tick marked.
Please find the output.
Check Transport Directory                                 03/30/2011 08:34:16
       QA1 CAL - Quality
           Transport Directory
               bin
sap2bksrv\sapmnt\trans\bin
               Create Test File
               Read Test File
               Delete Test File
          buffer
sap2bksrv\sapmnt\trans\buffer
                Create Test File
                Read Test File
                Delete Test File
          cofiles
sap2bksrv\sapmnt\trans\cofiles
               Create Test File
               Read Test File
               Delete Test File
         data
sap2bksrv\sapmnt\trans\data
              Create Test File
              Read Test File
              Delete Test File
         log
sap2bksrv\sapmnt\trans\log
             Create Test File
             Read Test File
             Delete Test File
         sapnames
sap2bksrv\sapmnt\trans\sapnames
             Create Test File
             Read Test File
             Delete Test File
         tmp
sap2bksrv\sapmnt\trans\tmp
             Create Test File
             Read Test File
             Delete Test File
Thanks and Regards
Satya

Configure of Portal Content for Material

Hello,
Need some direction on Configuration of Portal for Material, What would be the Web Dynpro application for Portal Configuration?
Web Dynpro Application: MDG_BS_MAT_OVP or USMD_ENTITY_VALUE2
Application Configurations: BS_MAT_OVP_03
We are working on MDG 6.1.
Regards, Srihari

Thanks Abdullah,
As per MDG doc, Portal shall import USMD_ENTITY_VALUE2. My question is we need to give Web Dynpro Application & Application Configurations and additional parameters to configure XML content.
So what would be the Webdynpro ID here.
Regards, Srihari

Transport System - Configure to automatically import Dev transports to QA

Hi,
Does anyone know the steps involved in automating the Tranport System to automatically import transports to QA once released in Dev?
Many thanks,
Marie

Hi,
Check out this thread
Transport Routes - configuring automatic import into multiple clients
Kind regards
Umesh K

Configuration os Portal with DNS

Hi Experts,
Can you clarify me
1. What is DNS, where can we store this value?
2. Is DNS and Portal URL both are same?
3 .Hhow can we configure the portal server with DNS?
Cheers
Phanikumar

hi,
what do you mean by dns? who told you, that you need it and what do you want to do with it?
usually DNS means Domain Name System <a href="http://en.wikipedia.org/wiki/Domain_name_system">Wikipedia</a>

Transport/Copy Configurable Products alone with Configuration from one Clie

Hi All,
I need to transport/copy Configurable Products alone with Configuration from one Client to another. Any body who can guide me how to do it.
Thanks,

Hi All,
Problem Solved ... Closing the Post...
Thanks and Regards,
The following steps were carried out inorder to solve the problem:
1) Create the Products in target system with the same name as in Host.
2) Create the RFC Connetion "HTTP Connection to ABAP System".
3) Create a Site of Type "External Interface for XML"
4) Assign RFC Destination to the Site Attributes
5) Create Subsciption and publication for "Product Configuration MESG".
6) Assing site and BDOC Type to the Interface Type in IMG
7) Define Request object
8) Start it request by entereing the Request Name, Source Site and Target Site.

Installing and Configuring Oracle Portal

http://oraclelabs.com/index.php/2010/08/30/installing-and-configuring-oracle-portal-forms-reports-and-discoverer/

Try running the diag.cmd and see for the log.If u cannot fig out just post the log too.

Transportation Management configuration

Hi
everybody
can you help me regarding Transportation Management configuration steps ineed to configur to my client

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LETRA/SDTRA.pdf

Transporting UWL Tasks between portals

Hello Gurus,
do you have any experiences with transporting AdHoc UWL Tasks between 2 portals?
Do you have any idea?
Copy of DB tables?
Use of UWL API?
Thanx
Regards
Ondrej

Hi,
I can help you with this ..these are the steps you need to follow:--
Process of Transport as EPA(Enterprise Portal Archieve)
EXPORT:--
Login to the the portal.
Navigate to System Administration.
Navigate to Transport-->Export.
Create a Folder inside the Portal Content say "TransDemo".
Right on the Folder and Select new Tranport Package and fill in the following properties.
Transport package name (required).
Transport package ID (required).
Transport package ID prefix (optional).
Master language (required).
Description (optional).
Select Objects for Export
Open the object (Transport Package) for editing.
Add all required iView, Page, Role, Workset in the object using right click.(Can directly add a folder also).
Click on to Export button.
After clicking Export Button file name is automatically generated (Unique name).
Export Selected Objects to .epa file.
Download Export File- It displayed how many files it exported.
Click on to "Download Export File" link for download.
Save .epa file in your hard drive.
IMPORT--
Login to the the portal.
Navigate to System Administration.
Navigate to Transport-->Import.
Select .epa file on Destination Server.
Import Editor Select "Client" as source for packages file
Select .epa file (Which is the back up file) Click on "Upload" button
Start Import and Check Status after uploading click on to "Import" button.
Display all imported objectAll iviews and roles are restored .
Just follow the above steps and ask if you have any doubts as i have used this method to transport many roles from one portal server to other.
Also one more thing can be done i.e:-->
If you want to create the same table, then just deploy the same dictionary project in the QA portal.
If you want to transport the datas of the table from current portal to QA, then use SQL to do Export/Import of datas at the database level.
So do some googling on export import db table for your DB and you will find lots of hints.
Please reward with points if you findit helpful.
Regards
Pooja

Error in OBN configuration Transport in SAP HR Portal

Dear All
We have configured flexible performance management in SAP ECC 6.04 with new webdynpro interface.The issue is that OBN settings which are required to be done are not getting transported from dev to quality.Also i do not see any way to copy the original object and replace it with object from dev portal.
Pls suggest
regards

<< Do not post the same question across a number of forums >>

Transport OBN Configuration in Portal

Similar Messages

Maybe you are looking for