Transport of APD process
Hi,
has anyone of you transported a APD process? We try to transport from a DEV system to the TST system. The transport is OK (only zeros, not even a varning somewhere), but what we get in the TST system is a modified version, not the active one. And since the TST system is closed, we cannot activate the APD process and hence not run it either.
Any ideas?
/Jan
Hi Jan,
did you already check OSS notes 792203 and 777832?
Regards,
Tobias
Similar Messages
-
APD Process for Cube - ODS data transfer.
hi,
Two data sources (cube and ODS) are feeding another ODS. I want to delete the data in Data target (ODS)belongs to that particular infosource for every data load if it comes from the same infosource without using process chain or events. (I want the similar option found in cube). I also want to write some complex functionality (ABAP CODE) in start routine of update rules.
Bhanu suggested me to use APD Process. Can any one (including BHANU) explain me in detail about APD Process. Please also give me navigations.
Regards,
AvneetHi Avneet,
You can read details about the APD here:
http://help.sap.com/saphelp_nw04/helpdata/en/49/7e960481916448b20134d471d36a6b/content.htm
Basically you can get to the APD from transaction RSANWB. Start creating a new process using a query as the source of data. You can provide a transactional ODS as a data target and you also have the opportunity of changing the data using predefined functions, or also ABAP code before loading into the ODS.
Hope this helps... -
Using APD process - What Transformation : BI to CRM
Hi All,
I am New to APD Process, i want to send data from BI ( DSO - Standard ) to CRM( Data Traget) system
What Tranformation process should i use?
Thanks,
Nithi.HI,
New to SDN also??
Refer the following link: [Analysis Process Designer|http://help.sap.com/saphelp_nw70/helpdata/EN/49/7e960481916448b20134d471d36a6b/content.htm]
Regards,
anil -
How to include an APD process in BW Process Chain
HI,
I have an existing process chain that I want to add an APD process to. There are dependencies. For example, I want the last 2 steps in the existing process chain to continue AFTER the APD process runs successfully. So, how would I include an APD process in my existing chain, I cannot find the variant that says APD in RSPC.Marasa,
Thanks for your help. I tried to do the second option that you offered just by including an ABAP program variant in my process chain.
However, my process chain fails at that step with tthe following error:
11/11/2009 00:09:53 Job started S 00 516
11/11/2009 00:09:53 Step 001 started (program RSPROCESS, variant &0000000432745, user ID BWREMOTE) S 00 550
11/11/2009 00:10:00 Spool request (number 0000031418) created without immediate output S SY 355
11/11/2009 00:10:00 Processing completed with errors. See spool list E RSAN_PR 22
11/11/2009 00:10:00 Job cancelled after system exception ERROR_MESSAGE A 00 564
I cannot find anything in the spool to get the exact cause of an error. When I run the APD process by itselt, it executes fine without any errors.
I used the following sap document to set this up in my process chain and followed everything they said:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/200ef8fd-a249-2b10-1d9c-91b169be870b&overridelayout=true
Thanks -
I have created a APD process which generates a query output to faltfile.
Wehn i run the process all values from the query output are diaplayed in the file. BUt only one filed dosent get extracted from APD.
has values in Query output but not in the APD generated file..
ITs just a straight forward field, no routine for that in APD.
Please can anyone suggest what can be the problem?
Its quite urgent...
Thanks in advance....
Regards,
Maddyhi
insert the routine even though it will be simple field mapping (one to one)
give source field/ target fields appropriately.
follwing is a sample code.
DATA: ls_source TYPE y_source_fields,
ls_target TYPE y_target_fields.
LOOP AT it_source INTO ls_source.
ls_target-PLANT = ls_source-PLANT.
ls_target-FISCPER = ls_source-FISCPER.
ls_target-CURRENCY = ls_source-CURRENCY.
ls_target-FISCVARNT = ls_source-FISCVARNT.
ls_target-CALDAY = sy-datum.
ls_target-TESP = ls_source-TESP.
ls_target-EXTRACT = ls_source-EXTRACT.
APPEND ls_target TO et_target.
ENDLOOP.
actual details will vary as to your source/target fields -
Saving images from apd process automatically into DSO or DB?
Hi All,
Is there any possibility to save those statistical graphs or cluster/regression-analyses images right into a DSO or Database?
i know i can rightclick them and save thats not what i need.
Or is there any way to trigger the apd-process except (RSAN_PROCESS_EXCECUTE) and tell the process to save certain images?
i searched the forum for answers but no success...
Thanks in advance,
YvesYou'll need to submit a feature request.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
You can quickly correct the incorrect sizing by right
clicking and selecting Resize. Unfortunately it has to be done with
each image.
Potentially you could use FAR from
http://www.helpware.net to do a
mass find and replace but be careful and make a backup first. -
APD process til CRM attribute with type CURR
Hi Experts
I have an APD process that I want to write 0amount to a CRM marketing attribute. Similar processes work fine with CHAR, DEC, and so on. It is only when I use CURR (0amount) that it does not work. The CRM 3.1 system says it is something wrong with the marketing attribute. We use BW 3.5. Have anyone experienced something similar?
Kind regards
ErikHi Thomas Kruck
The error message I am getting is:
<b>CRM-error: Charateristic KJOP:
Messagenumber. RSAN_MDL022
Diagnosis
The following error occurred in the CRM system when trying to access that system:
ECRM_MKTPROF048: Characteristic KJOP:</b>
The characteristic KJOP in the CRM system has the same parameters as the InfoObject I am using BW.
I guess I have to post a Note on this...
Erik -
APD process is active, How to trigger the data from BI to CRM table
Hi All,
I want to send data from BI system(using APD method) to CRM table (ADS method).
I am able to see the table for e.g ABCD in CRM system , i can open using SE11 , but data is 0.
In BI , i have data in DSO and i have mapped it in APD process to data Target to CRM system and APD is active.
Now i want to know how to trigger the data from BI to CRM table? (e.g ABCD).
Please let me know the steps.
Regards.
Nithi.Hi
Just create a Process Chain to execute this APD method, if the process Chain is already available, then just insert this Process in to the process Chain and execute the Process Chain by normal process, by hoe we do in general.
Hope it solves... -
One of the APD Process Chains fails.
Hi All,
I have created two different process chain (PC1 and PC2 for example)which use program RSAN_PROCESS_EXECUTE to execute the two diiferent APD (APD1 and APD2 for example) . PC1/PC2 executes APD1/APD2 respectively.Both the process chain have the same trigger event.
The issues is that only one of the process runs successfully and the other fails at the program RSAN_PROCESS_EXECUTE
For example if the PC1 runs PC2 fails at the program RSAN_PROCESS_EXECUTE and vice versa.
The Error message it displays is
1) Job started S 00 516
2) Step 001 started (program RSPROCESS, variant &0000000155350, user ID ALEREMOTE) S 00 550
3) Spool request (number 0000030567) created without immediate output S SY 355
4) Processing completed with errors. See spool list E RSAN_PR 22
5) Job cancelled after system exception ERROR_MESSAGE A 00 564
Thanks
Rajivhi,
To check the detailed error message for failure of APD, check in RSANWB, goto that APD and click on monitor.
You will find the spool over there.
Check the error message and let us know, so that we can try to help you out.
It can be due to authorization issue or due to low memory.
Regards
Lavanya -
Error while Transporting changes in Process chain
Hi All,
I have added a Hierarchy InfoPackage in Process chain and added this InfoObject in Save hierarchy and Attribute change Run Process types.
My transport Request is showing only three entries each for
save hierarchy , attribute change run and one for Process Chain.
Now when I transport this changes to Process chain to Acceptance its showing Error message in Acceptance as
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
Process variant LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 does not exist in version A
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
InfoPackage no longer exists in object version A in table RSLDPIO
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
Variant 'ZPAK_4AY55YMC1H454OQWJUBNJCYE9' of process type 'LOADING' not found in A version
Errors occurred during post-handling RS_AFTER_IMPORT for RSPC L
The errors affect the following components:
BW-WHM (Warehouse Management)
My question is , Why the Transport request is not transporting the InfoPackage.
Is there any solution for this?????
Thanks in Advance
Best Regards
Pratap SoneHi Pratap,
The infopackage has not yet been assigned to a package in all probabilty. Change the package and then transport the IP and then transpost the process chain request.
Regards.
Edited by: Ansel D'Souza on Sep 8, 2008 7:31 AM -
Customizing Transport Request Assignment process to Local Objects
Hi,
I am developing custom report, which will find out all dependent and local objects for given transport request. When we select the local objects and save, it has to show standard saving process screens...like package and TR screens.
I am trying the above problem using 'TRINT_TADIR_POPUP', 'TRINT_ORDER_CHOICE' and 'TRINT_APPEND_TO_COMM_ARRAYS' function module, but this function module 'TRINT_APPEND_TO_COMM_ARRAYS' giving exception ob_check_obj_error.
So, please let me know anyone have solution for assigning local objects to package and TR through customization (Programmatically).
Thanks,
Param..:-)Hi Sheetal,
Thanks for the reply.
For this function module ADD_TO_PACKAGE, I can't import package name or Transport Request.
I need to have a save screen's, which generally we get during saving of any R/3 Object.
Thanks,
Param...:-) -
Modifiying, Transporting and Scheduling Process Chain
Hello ALL,
i have to create a new process chain for a delta Load and put this process chain in a big existing Meta Chain, after i have to transport to Quality System.
if i control the difference between Dev and Quality system to have an idea i see that the Infopackages in Dev have the execution tab: Load Data Immediately without job: BI_BTCH
in Quality some Infopackages have execution tab: run successively in batch with job like this:
BI_BTCH LX6CW08S1ICM04I4O06KOPL
can you tell me please in detail how should i complete this activity:
- wich type of control should i do before creating and modifiying process chain in DEV and Quality
- how should i do to control in Quality the scheduling of a process chain
- if i modify a process chain in DEV and after i will transport in Quality what will be the affect in Scheduling, the scheduling will be the same without problem or i have to schedule again
- in generale how can i schedule a process chain, wich transaction and how in detail
Thanks a lot for your help
BilalHi Bilal,
1) EVENT: When you want to have a process chain 'A' to be started after completion of a process chain 'B' or any process in process chain 'B' we can use this event. These two chains can also be from different BI systems. Like Chain 'A' could be from one production system and Chain 'B' could be from different production system. As soon as the chain A finished an event will be triggered and this event will trigger the chain B. The start time of chain B might differ because it depends on the completion of chain A. To schedule a process chain using an event, Go to Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections. click on "after event," give the event name in the slot and select the periodic job.
2) RUN JOB PERIODICALLY: When you want to have the chain run for more than once periodically we select this option. Suppose, chain B has to run after completion of chain A periodically we have to use this option. If you do not check this option, your chain B will run only once when the event is triggered after completion of Chain A. From the next time onwards, it not run even the event is triggered.
3) JOB: For every process when it runs a job will be created assainging it to a work process in the system. Similarly, when the chain starts a job will be created containing the log of the run. Also, in the scheduling options of a process chain, you can have your process chain started after completion of a particular job in the system (ex: an attribute change). For this, Go to Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections. click on "after job" give the job name in the slot and save the settings.
4) SCHEDULING PROCESS CHAIN: Means to make settings to a process chain so that it will run on a periodic basis at a certain time. If you want to start a chain immediately, you will choose the option immediately and trigger it. It will run for only once. But, if you want to have your chain run everyday at 7:00 am in the morning, you have to schedule it using the scheduling options as below:
In Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections." Click on Date/Time button. Give the start date and time in the Scheduled Start slots. (Ex: 09-04-2009, 7:00, to have the chain run at 7:00 everyday starting from tomorrow). Tick the check box Periodic job in the bottom and click on "periodic values" button and select the option as daily and save it. Then click on "Restrictions" button to specify the factory calander. The Tcode for calander is SCAL, where you can see all the factory calanders in the system and you can choose that suits your requirement. Save the changes and navigate back to process chain maintaince screen and click on "Schedule" button.
Now your chain is automated for trigger -
Problem with a transport Guided Procedures process - INVALID_LANGUAGE
Good day. I have a process created in GP. It contains many objects where Original Language is not English. Also the folders, where the process lays, have the Original Language - not English.
When we try to create a request we get an error: Cannot export transport request;
com.sap.caf.eu.gp.base.exception.EngineException: Function module
EUP_TSP_EXPORT produced ABAP exception at SAP system: INVALID_LANGUAGE
How we can fix it?
Also we tried to create a dummy folder with the Original Language - English and there weren't any troubles. So the problem in the Original Language... If we only could to change it for the existing objects, but the field is disabled. May be there is some workaround to change a language for the existing objects?Hi Kirill,
As a workaround you can export this process in .sda file and than deploy it on the backend system.
Regards,
Yordan -
Transport Request and Process Chain - Together?
Hi,
Is it safe to transport a request while a process chain is being run?
Need your expert advice. Thanks!Hi Winnie,
It should not affect the transport. Still a question, Does the transport request contain anything from the process chain?. If you could wait for sometime then do it after the process chain run is completed. Though I think unless you change anything in the Process chain like infopackage selection, etc. the transport should go through.
Bye
Dinesh -
Transport error in process chain
Hi to all,
Could someone help me out on my problem? I changed process chain in and request for transport. but am getting errors when I transported them.
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain ZOA_PC12A_TR_SRV_REP was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC12A_TR_SRV_REP Was Activated And Scheduled
Version 'M' of chain ZOA_PC12B_TR_SRV_REP was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC12B_TR_SRV_REP Was Activated And Scheduled
Version 'M' of chain ZOA_PC12_TR_SRV_REP was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC12_TR_SRV_REP Was Activated And Scheduled
Version 'M' of chain ZOA_PC3C_D_ATTR was saved without checking
Error in remote call of destination P23BW Chain ZOA_PC3C_D_ATTR Was Activated And Scheduled
Version 'M' of chain ZOA_PC5_M_ATTR was saved without checking
Error in remote call of destination P23BW Chain ZOA_PC5_M_ATTR Was Activated And Scheduled
Version 'M' of chain ZOA_PC92_INIT_TXN was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC92_INIT_TXN Was Activated And Scheduled
Can someone tell me what am i going to do next? thanks
Regards,
jasperHello again,
My problem is resolved. I am in SP17 and I applied a few SP18 notes:
0001002791
0001077030
0001139653
0001147587
0001147766
I then re-transport the request with the DTP and process chain. The expected result is the dtp in the process chain should be pointing to the new dtp. CHeers.
HWS
Edited by: Ho Wei Siong on Aug 14, 2008 3:35 PM
Maybe you are looking for
-
.xml file not recreating
I'm trying to use iPhoto and sync to an iTunes playlist, but it turns out that my iTunes Music Library.xml file hasn't modified itself since December. That means it no longer matches my real library and iPhoto can't use it. I dragged the iTunes Music
-
Deployment Tool, Different Config Files, Same Results
I should mention that I'm generating App-V 5 packages for Office 2013. Maybe this question belongs in the App-V forums. I can't seem to create a configuration file for the Office Deployment Tool that does what I want. This configuration: <Configurati
-
Run CS3 and 8 at the same time on mac?
I want to download a trial version of the CS3 and run it, at the same time, as my existing Dreamweaver 8 on my G5 Mac running 10.4.10. (It is NOT an Intel Mac.) There is a 30 day trial and this way, in the downtime between projects, I can test out an
-
LR4 problem or PS problem?
When I export an image from LR4 to Bridge for final retouching in PSE9 (as a 16-bit PSD file), the file doesn't show a thumbnail image on Bridge, only static. I can call it up, do editing and change it to 8-bit, but when I try to save it, I get this
-
MBP15 Retina: Cant wake from Display Sleep
I've bought my MBP15 with Retina a week or two ago. You know how your display turns off after a minute of leaving you Mac idle? When I touch the trackpad or any key on the keyboard to log back in, the display turns back on for 1 second, then goes bla