Transport of Characteristics management  - CT04 and CL02

Hello,
I wonder if you like to carry all environments and characteristics of the classes created by material transactions CT04 and CL02, perform all the settings in the environment of testing and must pass to the productive environment, it is possible to transport? Or have to repeat all the configuration in other environments?
Thanks.

Hi
Maintainenace of Charcteristics and classes is not a configuration, it is a master data.
Some of the master data can be transported like tax codes.
But we cannot transport classes and Characteristics. You need to replicate all the relevant data in production.
If you have a lot of data then prepare data migration tolls like LSMW, BDC and BAPI's
Thanks & Regards
Kishore

Similar Messages

  • How do we make automatic and mass transports via Solution Manager

    How do we make automatic and mass transports via Solution Manager ..
    how can we do this is there any specific procedure please let me know
    Regards
    Karthik

    To attempt a new chat session...
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    http://helpx.adobe.com/x-productkb/global/service1.html

  • Solution Manager/Charm and Transport Dependency Check

    Hello Everyone,
    I apologize if this question has an obvious answer.  I have searched SDN and could not get a 100% answer.
    We are just now in the process of rolling out Charm/Solution Manager and I have noticed that it appears to not perform transport dependency checks.  For example, let's say I am working on object ABC and have completed my testing (ready for transport to production) and then another developer also starts development on object ABC.  When my change is moved to production, it will pick up the other developers modifications without giving a warning or an error that a dependency has been encountered between the two transport requests. 
    Does Charm/Solution Manager offer the option of producing a warning should a transport depedency be identified?  If so, will someone explain (or point me to the appropriate documentation) how this can be set up?
    Best Regards,
    Scott

    Hi Scott,
    ChaRM supports imports from DEV->QAS->PRD by transport by transport requests level not by transport request task level. So don't worry(i.e., You can't import only your change of object ABC to production. It allows to import your change and other user's change of object ABC together to production).
    This is how it works(if more than an user works on the same object):
    1. Requester creates a support message from satelitte system to report a problem.
    2. Service desk employee creates a change document because some changes need to be done on object ABC to correct that reported problem.
    3. Change Manager approves the change document. So a normal correction is created automatically.
    4. This normal correction is assigned to 2 developers(your scenario) like for an example DVPR1 and DVPR2.
    5. DVPR1 creates a transport request and does some changes on object ABC. So a transport task will be created for DVPR1 under that transport request automatically.
    6. When DVPR2 tries to do some changes on the same object ABC, a seperate transport task(not a transport request) will be created for DVPR2 under the same transport request because the object ABC is locked under the transport request. So DVPR2 can't create a separate transport request for the same object if any transport request is pending(not released).
    7. Now object ABC will have one transport request. That transport request will have 2 transport tasks(1 for DVPR1 and 1 for DVPR2).
    8. Each developer relases their transport task only(not transport request) once he/she completes his/her change on the object ABC.
    9. DVPR1 or DVPR2 will change the status of normal correction to "Development Completed".
    10. Now, IT operator or DVPR1 or DVPR2 can release the transport request. The transport request can be released only if all tasks are released under the same transport request.
    (In this example: DVPR1 completed his change and released his transport task. Next DVPR2 completed and released his transport task).
    11. Finally IT operator import the transport request to QAS and PRD.
    Hope you are clear now. Let me know if you have any doubts.
    Regards,
    Sanjai

  • SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

    SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
    Error:
    The following error was generated when "$error.Clear();
              $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
              $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
              if ($be -eq $null)
              new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
              . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
            " was run: "The virtual directory 'ecp' already exists under 'server/name'.
    Parameter name: VirtualDirectoryName".
    Error:
    The following error was generated when "$error.Clear();
              $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
              $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
              if ($be -eq $null)
              new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
              . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
            " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
    Error:
    The following error was generated when "$error.Clear();
              $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
              $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
              if ($be -eq $null)
              new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
              . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
            " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
    !! And now transport service won't start and mail is unavailable !!
    Any help would be appreciated.
    I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

    Hi,
    Thanks for your response.
    From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Difference between a Solution Manager project, and IMG project.

    Hello,
    We are in process of installing and thereby configuring scenarios for Solman 4.
    While reading about it on help.sap.com, I came across following:
    <b>
    "<i>The Change Tracking function of Change Request Management allows you to track everything that relates to changes within the context of a Solution Manager project, or an IMG project."</i></b>
    Please help me here by clarifying difference between two.
    regards, Shantanu

    Hi Shantanu,
    Let us assume you have captured everything w.r.to an SAP Implementation project in Solution Manager and this project has gone live. Here all details relating to an SAP Project are captured in a Solution Manager Project. Solution Manager project acts as a container to hold all the details relating to the SAP Project.
    Now when this SAP Project comes in the support/maintenance phase, whenever a small change needs to be done to this SAP Solution, it will be raised as a Change Request. This change request will be captured in Solution Manager (starting from the point when the request was raised from an end user as a support message, which eventually might have evolved as a Change Request). All details about this change request, its approval workflow, task control being transferred to different roles(people), movement of the request along the transport path, everything is captured and controlled in the Solution Manager Project.
    So, we are clear about Solution Manager Project now.
    What is an IMG Project?
    For each and every component involved in this SAP project, an IMG project will be created with the same name as the Solution Manager Project in the component systems. These IMG projects in the Satellite systems are the same as the normal Project IMGs which we use in any SAP Project to hold all details relating to an SAP Project w.r.to that component.
    In the context specified by you, it has been told that any changes w.r.to a Solution Manager project or an IMG project can be tracked in CHARM. It is because any change that is requested w.r.to any component(say SRM or ECC) will result in a change in the details captured in Solution Manager project about that SAP Project, and also will result in a change in the details captured in the appropriate Project IMG (say SRM or ECC).
    Hope it is clear.
    Dont forget to reward points for useful answers.
    best regds,
    Alagammai.

  • What is difference between Managed Bean and Backing Bean?

    What is difference between Managed Bean and Backing Bean? Please guide me how to create them and when to use them?
    Please post sample for both beans.

    Hi,
    managed beans and backing beans are quite the same in that the Java object is managed by the JavaServer Faces framework. Manage in this respect means instantiation. The difference is that backing beans contain component "binding" references, which managed beans usually don't. Do backing beans are page specific versions of managed beans.
    Managed beans are configured either in the faces-config.xml file, or using ADF Faces and ADFc, in the adfc-config.xml file
    Frank
    Edited by: Frank Nimphius on Jan 31, 2011 8:49 AM

  • Cannot delete music from iPod nano (latest generation).  Have already selected "Manually Manage music and videos" but delete is unavailable from right click or Edit.

    I have done everything I've seen recommended for deleting music (jncluding "manually manage").  Thanks for the assistance!!!

    Did you Apply the change after selecting (checking the box for) Manually manage music and videos?
    With the latest iTunes, if the sidebar is hidden, from the menu bar, under View, select Show Sidebar.
    In the sidebar, select the iPod under DEVICES.  Click the toggle (to the left of iPod) to drop down the iPod's content list, indented under iPod.  Click on Music there.  Over to the right, the list of songs on the iPod is shown.  You can select songs there, right click on them, and select Delete from the contextual menu.  You can also select songs there, go up to the menu bar, and select Delete under Edit.  You can also select songs there, and just press the Delete key on the keyboard.
    If you want to use automatic syncing, which is far more convenient than the manual method, and easily manage content on the iPod (add and remove songs), please post back.

  • Managing Events and/or Projects With Disk Images

    I came across this method of managing Events and Projects a while ago. I finally got around to giving it a try. Personally, I really like this method.
    It's simple.
    It keeps things very well organized.
    It's easy to open only the project or events that you want.
    It's easy to consolidate and back up once you're done.
    It  takes some workload off FCP X by not having to always open up all your Events and Projects.
    So, I thought I would share this for those of you who were not already aware of it.
    This is my workflow: (based on the link below)
    I create a Disk Image (named for the Event/Project).
    (Note: There are two places to create the name, I use both, keep them the same)
    I open up FCP X.
    I typically put only one Event on this Disk Image.
    I then reference whatever Media I need in this Event.
    I usually don't bother to copy the media. (except when I'm done and I archive it)
    You can create multiple Events, if you feel the need for additional organization.
    Then I create however many Projects I need.
    (since Projects equates to Sequences from prior FCP versions)
    I have a unique Disk Image for each Event/Project that I work on.
    To use them ...
    First, always make sure FCP X is not running.
    Locate the Disk Image in finder.
    Double click on the Disk Image and it will Mount on your desktop.
    (assuming it's not already mounted on your desktop)
    Open up FCP X and it will load the Event(s)/Project(s) in the Disk Image.
    If you don't want to work on an Event/Project in FCP X (make sure FCP X is not open), in Finder, simply Eject the Disk Image.
    Now when you open FCP X, it won't be there.
    Its not gone, but since it's not mounted on the desktop, FCP X simply doesn't see it.
    To get it back (obviously quit FCP X first) simply double click the Disk Image in Finder and it remounts.
    Open FCP X and you can see it's back.
    You can open (double click to mount) as many Event/Project Disk Images as you want.
    Just make sure you mount and un-mount disk images when FCP X is not running.
    If find this to be a great workflow.
    Many thanks to Steve Martin of Riple Training for posting this method.
    http://www.kenstone.net/fcp_homepage/fcp_x_managing_disk_image_martin.html

    Re the final commercial spot.  What I am getting at is if all my media is optimized and therefore in ProRes, and I export in ProRes using the current settings, then shouldn't the media needed to rebuild the project be the same or close to what an exported Quicktime would have been?
    Perhaps the notion of "used clips only" is not what it says then.  I took that to be the "media managed" feature otherwise why is that wording there.  I guess "used" actually refers to all of the media for the project and associated events rather than just for the project.  This is misleading because the DUPLICATE operation and menu prompt only appears as a result of requesting an action on the project item.
    There are aliases in my original event folder, but before I started this process tried to get FCPX to consolidate media for the project and it already was according the app.  Truth is, some of the media is outside of the FCPX required folders.  So it's strange that it says it's consolditated, but it's not and yet in duplicating the project it moves the references to the new volume only to point back to the old volume.
    So my next question would be: Is there no feature to back up only what's needed to rebuild the final project (edit) reliably.  Moving the project moves everything.  According to the FCP manual, it seems using the Duplicate feature is the way I should be archiving.  However if by "used clips only" FCP X means all media and refrerenced events, then I guess there's nothing for me in here.  However then, whey would there be an option (after choosing duplicate project) an option to Duplicate Project and  referenced events.  If "used clips only" means all media, then there's no difference between the 2nd and 3rd Duplicate Project options.
    Thanks Tom.

  • A follow up question to Introducing Apple Recommends, Manage Subscriptions, and This Helped Me

    In Introducing Apple Recommends, Manage Subscriptions, and This Helped Me it was written
    Now anyone can click "This helped me" to say thanks to helpful members. When several people mark the same post, it will earn a gold star and appear at the top of the discussion, so it’s easier for others to find. The poster will also earn five reputation points for a job well done.
    Does anyone know (or is it written anywhere) just how many is 'serveral'? Is it decided on the fly? Or does it depend on the phase of the moon?
    Will the points be awarded to the poster only once, or if say 100 people mark it as helpful will more then 5 points be awarded?
    Sounds like a really good system but it seems that a bit more thought should have gone into it, no? Or at least the explanation could be clearer.
    Ciao.
    (Another question) Can the original post (this one) get marked as helpful also? Imagine  earning points for posting :-)

    Howdy GeoCo et al
    I sort of agree with this new "Helpie-ette" deal. I wonder why while at this portion of the UX they didn't address the ongoing issue of the "irrevocable nature " of the OP awards of the traditional Green Stamp and Gold Star - I have made the mistake (once) but I see the silliest things marked Solved frequently. THAT is bad for business in that it gives false visual info and false statistical results.
    We'll see... BTW, the [People] TAB itself is the only new thing (the CONTROL in the TAB bar) - the URL has always been alive and well if one knew to add " /people "

  • Error loading Virtual Machine Manager 2012 and Data Protection Manager 2012 modules together

    Hi.
    Very strange issue: when i try to load together Virtual Machine Manager 2012 and Data Protection Manager 2012 modules - script fails. If first loaded Virtual Machine Manager 2012 module:
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\ObjectModelCmdlet.dll because of the following error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property
    for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.Internal.EnterpriseStorage.Dls.Utils.AlertTypes.AlertEnum' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\Modules\DataProtectionManager\DataProtectionManager.psm1:2 char:14
    + Import-Module <<<<  (Join-Path $cmdletDllPath ObjectModelCmdlet.dll)
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand
    If first loaded DPM 2012 module::
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Microsoft.SystemCenter.VirtualMachineManager.dll because of the following error: Unable to load one or more of the requested
    types. Retrieve the LoaderExceptions property for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineException' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'Microsoft.SystemCenter.VirtualMachineManager.ClientObjectHWSettingsSourceAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have
    an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'HardwareConfigSettingsAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.ServicingTypeValues' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.FabricCapabilityType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.SKUType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At \\team\dfs\scripts\Admin\Scvmm\Move-VirtualMachine.ps1:103 char:16
    +         Import-Module <<<<  'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\virt
    ualmachinemanager\virtualmachinemanager.psd1';
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand

    Vote if you have same problem:
    https://connect.microsoft.com/PowerShell/feedback/details/873348/scvmm-and-scdpm-powershell-modules-cant-work-together

  • Grey songs appear after managing music, and seemed to be unplayable/lost. Videos lost as well. How do i retrieve them?

    After doing some actions with my iPod Touch 4G, ALL my music AND video library turned grey, or rather, after pressing the Music app, I received the message, along the lines of "There is no music." This is on my Mac laptop with an older version of itunes, my main music is however backed up on my desktop Mac.
    Actions and settings that i took which may have caused the grey-out or loss of my music and videos.
    1. Manually manage music and videos.
    2. Unchecked and rechecked a song, out of sheer interest (this may be the problem) whilst on my laptop
    3. Managing files inside the iPod, using another desktop application whilst the iPod was in my laptop.
    The situation
    All music appeared grey in my iPod
    Majority of VIDEOS LOST.
    Retrieved most of MY music from my Home Mac via iTunes auto-sync
    Friend's music is LOST (greyed out and unplayable in iTunes)
    My attempts to retrieve lost music and videos:
    1. Removed my iPod from laptop and attached my iPod to my desktop Mac, and it automatically synced, retrieving the music i had. The music my friend had recently lent me, that is, put in my iPod via his iTunes on PC APPEARS TO HAVE BEEN LOST. My music is in black font on the iPod, but the music my friend had gave me is in light grey/gray font.
    Where did this video and music go? Did i delete the music and videos?

    Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
    Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

  • MDB Container Managed Transaction and Log4J

    Hi,
    I'm programming and MDB that reads and updates a database then sends out an HTTP Post and logs using log4j. I've read that when an MDB is configured as CMT or container managed transaction and the OnMessage method executes without errors, the transaction is implicitly commited. You can rollback the transaction by explicitly calling setRollbackOnly() or when a RuntimeException has been thrown. My worry is that after I have sent out an HTTP POST (a transaction has been completed) I would have to log a transaction completion using log4j. My problems is if log4j throws a RuntimeException thereby rolling back my transaction which shouldn't be the case. What I have done is to catch all Exceptions (and swallow them) whenever I log using log4j after I have sent out an HTTP POST succesfully (since my transaction should be complete by then). Is this a correct workaround?
    Thanks :)

    Your approach is correct. If you think, Log4J might throw errors, swallow the exceptions and try not to roll back.

  • I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put bacPlease Help!!!

    I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

    I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

  • Really confused here. I have somehow created both a managed account and an administrator account. The admin acct is now highlighted in system preferences. We are now blocked from using our computer because parental controls keeps popping up.

    In attempting to add a music lesson program for my daughters band lessons we have messed up our computer. I now have both a managed account and an administrator account (both in my name).  It is using the managed account now and not letting use the Internet because parental controls keep popping up. I would like to delete the managed account and get back to the admin account but I have no idea what my login is for the admin account. We have never had to use it before this problem started and what we thought it was when we set it up does not work. Any ideas?

    If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
    Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select  ▹ Restart from the menu bar.
    You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

  • Can't add music my iPhone from iTunes.  When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.  [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

    Can't add music my iPhone from iTunes.
    When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
    [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
    Also, just updated the phone's software today, and iTunes' software is already up to date.

    Hi Gregg,
    Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
    Cheers,
    GB

Maybe you are looking for

  • Page Validation - Function Returning Boolean - Check for NULL

    I have 3 Page Validations which all fire on "When Button Pressed" = "Submit". <br><br> Number 1 is of type "Item specified is NOT NULL" for "P199_BUSINESS_UNIT1". <br> Number 2 is of type "Item specified is NOT NULL" for "P199_BUSINESS_UNIT2". <br> N

  • What are the options for integrating the event catalog and event landing pages in our website?

    We'd like to integrate the event catalog and event landing pages into our website but would prefer not to use the standard iframe embed code. Are there other solutions available, like an API or something else? Reason for this is that when we tried it

  • What is best practice in FR ? Original Report access to Users or Snapshot

    Hi, can any one pls. let me know on what is the best practice in FR ? I need to give access to original reports to my users or the snapshot access only ? Users are not happy with snapshot access mainly during the closing time. What are the complicati

  • ICloud registered to mac address, not me address

    I originally got dot mac al those years ago and set up [email protected] (a) then mobileme came along and I also got [email protected] (b) I also set up two aliases with mobile me [email protected] (c) and [email protected] (d) "a, c &d"  all work fi

  • How can I set the default font in tables

    I am using Pages "09 4.3.  I use Myriad in Table cells and have to change the font in about 6 cells in a table before Pages accepts that is the one to use.  I would like to be able to determine the default font in one operation when I first set the d