Transport of copies delete customizing z

Hi Gurus,
I'm installing a lot of objects (customizing and workbench) in a SAP system from our company system to client system. We create a request (transport copies) for do it. The problem is when import the request to client system all customizing Z that client have, disappeared after import request.
For example: In transport copies request have only this "Delivery types":BV,LF,LR,NCR,NL,NLCC,NLR,SHCC,SHCD,SHLR,SHNL.
The client system have the standard "delivery types" and ZNL,ZNN.
When we import trasport copies request the "delivery types" ZNL and ZNN disappeared.
Anybody knows how to do for Z (ZNL and ZNN) customizing not disappear??
Thanks a lot in advance.
Jordi Giralt

First of all, Thanks for the reply!!
Yes, I'm reffering to table TVLK, and the changes of the table modifies by transport request.
The transport request don't have any * in table TVLK or V_TVLK. The lines in the request are:
V_TVLK     TVLK     110SHCC
V_TVLK     TVLK     110SHCD
V_TVLK     TVLK     110SHLR
V_TVLK     TVLK     110SHNL
V_TVLK     TVLKT     110SSHCC
V_TVLK     TVLKT     110SSHCD
V_TVLK     TVLKT     110SSHLR
V_TVLK     TVLKT     110SSHNL
Any idea?
Thanks,
Jordi

Similar Messages

Transport customizing objects in transport of copies

Hallo,
my question is, if I can include objects from customizing transport into transport of copies and transport them only into specific system. What is differences between transport objects in transport of copies and customizing transport. Generaly I understand what is diferent between those type transport, but.. My interest is mainly what can be bad with customizing objects in target system after transport of copies and what activities does customizing transport in comparison with customizing transport. Are there any risks??
thanks a lot for answer
Edited by: Tomas Chudoba on Oct 19, 2010 2:50 PM

Hi Tomas,
The Transports of copies allow you to transport (sub-)objects in an object list into any other SAP System you want.
Where as Workbench or Customizing requests there is no automatic delivery into other systems for transport of copies.
Regards,
Chandu.

Transport Organizer SE10: perform transport of copies

Hi,
I would like to make a "transport of copies" from production system to development system. I collected my objects in a "standard" transport request via RSA1 -> Transport Connection. Then I created a "transport of copies" request in SE10.
So I now have the standard request and a second transport of copies request where I set the development system as target system.
I now need to move the collected objects to this transport of copies request but couldn't figure out how to do this...
Thanks for your help!

Hi,
please perform steps below, some you already covered:
Transport from PRD to DEV
1. First collecte it in a workbench TR in Production. and release this request.
2. Now create a TR as "Tranport copies request" in SE10 . This is 3rd type of TR apart from Customizing TR and Workbench TR.
3. Include the components of TR released in first step into the TR created in 2nd step.
4. Now go to edit mode for TR created in step 2, specify the DEV system Logical name as the destination for this Tr.
5. Now release this TR. And if you refresh the STMS in DEV you can get it in the list. So import it.
So keeping in mind your steps already done: you need to release the first transport (copy the number because you need it at step 3). Then in step 3 you go to the transport of copies request and there is a 'include objects' button/icon in the menu bar. You click this and then paste your copied transport number and the objects will be included. Follow up with further steps.
Hope this helped,
regards
C.

How to delete custom AET fields in CRM 7.0 Web UI

Hello gurus,
When I want to delete a custom AET field created by a mistake or for exercising purposes only, the UI Config tool markes it for deletion by changing a status to "Marked for Deletion" (a garbage bucket icon). My question is how to proceed further, i.e. eliminate the field completely. Do I need to manually delete the fields from the "Append" structures in the corresponding CRMS_xxxx Attribute structure, or do something like this?

Hi,
note: please do not delete the field manually from SAP GUI.
AET is able to create and delete custom field. The deletion process happens always in 2 steps.
1. you select which field you want to delete and press on delete icon. This will mark the field to be deleted.
As long, you do not "Save and Generate". This deletion mark will not be persisted and the complete deletion of the field will not be executed. Having this mechanism, you are always able to cancel the deletion.
2. If you really want to delete the field. Press on "Save and Generate". "Save" will persist the deletion mark for the field.
And "Generate" will do the "Delete" generation.
Please don't forget to remove the field from the UI configuration, when you configured the field in any UI Config before.
Regards,
Steve

Logic Pro X 2013 delete custom loops

How do I delete custom loops from both my library and the UI?

Apple loops are stored in these locations...
YourHD/Library/Audio
YourHD/Users/'you'/Library/Audio
YourHD/Library/Application Support/Logic
YourHD/Library/Application Support/Garageband
if you cannot find one of your own...
Use Find Any File (FAF) to locate it...
http://apps.tempel.org/FindAnyFile/
FAF makes life much easier when trying to find things on your Mac

Deleted Custom Report

Is there a way to recover a deleted custom report?

Without launching a session to my install I don't believe so. However, and proceed with caution on this. If nothing significant has changed configuration wise you might be able to find your last DB backup point and restore from there. But that comes with it's own set of complications since it's likely your Filestore wasn't backed up at the same time causing them to be out of sync causing your more frustration than simply rebuilding the original report from the beginning..
I believe it may be possible to export the reports in XML after creation, then if needed reimport the file to restore so to speak. But you would need to predefine the XML template and I think this is isolated to ZAM, ZCM 10. I know this is information after the fact, but if it works then you shouldn't encounter this situation again.
Cheers,
Bryant

I have Lion 10.7.4. How do I delete custom templates in Pages '09 v.4.1?

Hello,
I have saved custom templates and then revised them and saved again. I now have several I need to delete. Also, how to delete custom templates? Also, how do I delete blank pages? I hate sending pdf's with a blank page at the end. Thank you very much for your help!

Pages stores those you created & saved as templates in (your account) > Library > Application Support > iWork > Pages > Templates > My Templates. The user's Library is hidden in Lion but it is easy to open. In Finder, hold down the Option key while clicking on the Go menu & your user Library will appear about halfway down the list.

Delete Customer Master Data OBR2

Hi
I'm using LSMW to import data. I would like to delete it afterwards. Transaction OBR2 which is in spro Financial Accounting (New) -> Accounts Receivable And Payable -> Customer Accounts -> Master Data -> Delete Customer master data.
But it does not delete the sales are segment, it also does not allow me to delete general data if sales segment exists.
Can anyone please let me know if there is another way around this? Any other way to delete this test data???
Thanks in advance

Hi
Please go through the SAP documentation on how to perform deletion of customer master data.
This may help you in executing the function correctly.
<b>Delete Customer Master Data</b>
In this activity, you delete the master records for customers by using a program. Only use this program in the test phase.
Note
The company code for which master records are to be deleted, may not yet be flagged as productive.
Only master records for accounts which do not have any transaction data may be deleted.
Requirements
The general customer master data is only deleted for customers who are not also created as customers in Sales and Distribution.
Activities
Delete the master records for the required company codes.
Additional information
Refer to the SAPF019 program documentation for further information on the program.
Deleting Master Data
Description
This program deletes master data in Financial Accounting and is designed for preparing the system for productive startup. It deletes:
     Customer master data
     Vendor master data
     G/L account master data
You can run this program in three different ways:
1. Deleting general master data (in G/L accounts in one chart of accounts)
2. Deleting master data dependent on company code
3. Deleting general master data and master data dependent on company code
For each deletion run, you can specify whether or not the system should take into account the deletion flag in master records ("Delete per deletion flag only"). If it takes into account deletion flags, it uses the following standard logic:
Option 1: The "All areas" deletion flag must be set.
Option 2: The "Specified co. code" deletion flag must be set.
Option 3: It is sufficient to have the "All areas" deletion flag set.
Note: Deletion blocks are always checked at general data and company code-dependent data level. If there is a block at company code-dependent data level, then the general data is not deleted either. The deletion block takes precedence over the deletion flag.
General master data in Financial Accounting can also be used in other SAP applications:
     Customer master data in Sales and Distribution
     Vendor master data in Purchasing
     G/L accounts as primary cost elements in Cost Accounting
The program deletes the following:
     Change documents for master data
     SAPscript text files
     The following data is deleted for customers:
o     General master data
o     Bank details
o     VAT registration numbers
o     Addresses
o     Classifications
o     Credit management: across control areas
o     Credit management: centrally
o     Unloading points
o     Tax indicators
o     Contact persons
o     Licenses
o     Partner function limit
o     Shipping data
o     Master data in the company code
o     Dunning data
o     Linked data
     The following data is deleted for vendors:
o     General master data
o     Bank details
o     Contact persons
o     VAT registration numbers
o     Addresses
o     Classifications
o     Master data in the company code
o     Dunning data
o     Linked data
     The following data is deleted for G/L accounts:
o     General master data in the chart of accounts
o     Names in the chart of accounts
o     Key word list in the chart of accounts
o     Master data in the company code
o     Sample accounts, if selected
For customer and vendor contact persons, the addresses are not determined from central address management until the actual runtime. Therefore differences can arise as to the number of addresses in the detail log between the test run and the update run.
Automatic worklists for customers and vendors are also deleted with the general master data. Matchcodes are always deleted.
You may have to fix the number ranges after the program run.
The system makes changes to the database in the update run only. It will then also write a system log entry for documentation.
Requirements
General master data can only be deleted if no other application makes reference to the account. Use the resetting programs from
     Sales and Distribution (customer master data)
     Purchasing (vendor master data)
     Cost Accounting (G/L account master data)
If you want to delete only general master data, master data dependent on company code cannot have been created in Financial Accounting.
If you want to delete master data in a test company code, master data dependent on company code cannot have been created in any other company code except the test company code. The productive indicator cannot be set for the company code.
If a customer or vendor is referenced by another customer or vendor (for example, via fiscal address or alternative payee), you can only delete the referenced master record by deleting the referencing master record at the same time.
Furthermore, you can only delete master data in Financial Accounting if no transactions have been posted to the corresponding accounts. If there are transaction figures in one of the selected accounts, you have to manually access and run program SAPF020 (reset transaction data from a company code) before you can delete that account.
Output
The log lists every table which is processed in the program selection.
You can also create a detail log for each account type to find out why certain data cannot be deleted. The detail logs show you what other company codes and applications use the data and how customers and vendors are linked to one another.
Note
Since deleting or displaying even smaller volumes of data can result in runtime problems, you should run this program as a background job. Currently, the program individually deletes matchcodes for each master record in the database. Several match code IDs refer to each matchcode. This can place a considerable load on the database.
You cannot delete transaction data in individual accounts.
Important: The archiving programs in Financial Accounting are designed for the productive system.
If you are running this deletion program for the first time, then you must start program SAPF047 before deletion in order to generate link information.
I hope this may be of help to you
Good Luck
Hari

Sap hr - deleting custom infotype

Hi,
Is it possible to delete custom infotype ?
If I delete a custom infotype, will I be able to use the same code to create a different custom infotype.
Rgds,
Santosh

Hi Remi,
Thanks for your reply.
Sorry, I have taken long time to reply.
I will provide the details :
I have created custom infotype having two fields. The data is selected from the master tables. We have created few records for the period 01.04.2012 to 31.03.2013. Now, the functional team wants to add new data to the Master Tables and remove some of the existing fields from the Master. I can add new fields to the master and it will get added as f4 field help. However, if I remove the data from the Masters, there will not be entries in master for the said records.
I am referring to PRD System.
Hope I have clarified the things.
Rgds,
Santosh

Normal Correction flow & Transport of copies

Hi,
I am performing following steps for Normal Correction. But when I first time schedule the imoprt job, nothing is moved to Quality system.
u2022     Action u2018Set to In developmentu2019. Status changes to u2018In Developmentu2019.
u2022     Perform action u2018Create Transport Requestu2019. Transport Request (ID6K900342) created.
u2022     Change the Maintenance Cycle phase to u2018Development with Releaseu2019
u2022     Developer completes the work & releases the Task in satellite system
u2022     Action: u2018Test Transportu2019. Creates Transport of copies (ID6K900344)
u2022     Schedule the import job. ( But after executing also nothing will be moved to Quality)
u2022     Action: u2018Complete Developmentu2019. System creates another new Transport of copies (ID6K900347) for Original Request.
u2022     Schedule the Import job. ( But after executing also nothing will be moved to Quality)
What could be the reason. both the TP copies are in queue only, nothing is moved to quality.
Regards
PK

Hi PK,
Let me try to explain:
NC => 80000001
1. Create TR
XXXK0001 (Original TR)
2. "Test Transport" or "Complete Development"
XXXK0001 (Original TR) -> still not released
XXXK0002 (ToC- copy of XXXK0001)-> is created in DEV
3. Import TRs to QAS (from task list)
XXXK0001 (Original TR) -> still not released
XXXK0002 (ToC) -> is moved to QAS
4. Now the changes are in QAS, but is not placed in the PRD import queue. So, you can test it with no risk.
5. If you have problem, go back to 'In development'
Correct the problem in XXXK0001
and go to step 2 again.
6. If the changes are OK in QAS
- Select 'successful tested'
XXXK0001 (Original TR) -> is released
7. Import to QAS
XXXK0001 imported in QAS and automatically placed in PRD import queue.
8. Import to PRD
The ToC is used to avoid import an inconsistent TR into PRD system, because once it has been imported in QAS, the same will be available to import into PRD, without any test.
BR
Fernando

How to import transport of copies to productive systems

Hello,
I have been experiencing a problem that even the guys from admin could not solve (yet). I should say I work in a development team.
Imagine you have two landscapes, one DEV-QAS(1) to develop big projects and a normal DEV-QAS-PRD(2) landscape where my objects will be imported. After a new group of objects is finished in (1), we ask to import the workbench request in the STMS queue of DEV(2). After this, and after some small test, we create a transport of copies in DEV(2) where we include the first transport, release it and import it to the QAS(2) queue. After the tests in QAS(2) the idea would be to import the transport of copies to productive system PRD(2). But it does not work...
In STMS queue for PRD(2), there is no entry for the transport of copies. Also, when I tried to add the transport request to the import queue (via menu -> Extras -> Other requests -> Add), I get an error message stating that no co-files where found for the transport.
Does anyone know this problem? I suspect it can have sothing to do with the use of a transport of copies, but, if I don't use this kind of transport, how can I get objects from other systems to production?
Thanks in advance.
Davide Sepanas, Portugal

Davide,
Re your latest questions:
> 1) Why this problem with transport of copies doesn't happen from DEV(2) to QAS(2), since these systems are also not in the same transport directory?
>
I think the answer is in your original problem description:
we create a transport of copies in DEV(2) where we include the first transport
>
When you create a transport of copies you must indicate a terget system and I suppose you enter QAS(2) there. In that case the TMS will add the request to the import buffer of the target system when you export the request from DEV(2). I understand that you never have to add transports of copies to the import buffer of QAS(2) manually, which proves the TMS does this for you. However, for further imports into systems that are not designated as target system of the transport of copies, like PRD(2), the TMS will do nothing of the sort and you must add the request to the queue yourself - which in your case also means you have to forward the transport files first.
> Can we assume, then, that, where I was working before, all three systems were configured in the same transport directory, avoiding thus the problem with the transport of copies requests?
Yes, and that is the most common way of setting up the transport system. Having separate transport systems really only makes sense when sharing the transport directory between the dev, qas and prd systems (via NFS for UNIX, via network shares for Windows) is not possible, either because there is no local network between the servers or because some security policy forbids it. I'd advise you to certainly ask the question to your system admin.
Regards,
Mark

Transport of Copies for Modif. Adjust. Transports during patch application

Hi Experts,
I've got two transport requests(Modification Adjustment Transports) in the DEV system containing SPAU and SPDD corrections for patch APPL-19, I need to include these Modification Adjustment transports when I start applying patch APPL-19 in my QTY system, wherein it prompts me to include Modification Adjustment Transports if any.
I've been told to release these requests in the DEV system encorporate both these requests into once and create a single request of the type Transport of Copies, and supply the Transport Request No. of this Transport of Copies request when it prompts me for Modification Adjustment Transports in the QTY system during patch APPL-19 application.
Please help me out with the procedure to create Transport of Copies for my case, also if you could post some theory on "Transport of Copies", it would be highly helpful.
Thanks Alot in advance.

Hi,
Check the thread for transport of copies creation.
Request type Transport of Copies
For theory check http://help.sap.com/saphelp_nw04/helpdata/en/57/38e1a94eb711d182bf0000e829fbfe/content.htm and related links as well which mention how to include objects into a request.
Regards,
Srikishan

Is there a way to delete custom presets? (Premiere Elements 11 Mac)

I have been experimenting with different ouput options for AppleTV with 1080p and 720p video, and have created many custom presets. I would like to get rid of several which didn't give good results. I have not found an option to delete custom presets from the share tab in elements11. There is no trash icon available. In addition, I have not had any success in finding the presets file. Any one know how to do this?

To delete a custom output preset, you just select the preset on the Publish & Share panel and then click the trashcan icon next to the preset drop-down menu.
Note, of course, that you can only delete custom presets. Not default presets.

ChaRM: Transport of Copies

Hi Team,
I have configured ChaRM for normal correction (SDMJ). The standard SDMJ process is, when i execute the action "Complete Development", it sets the status of the normal correction as "To be Tested" as well the transport of copies also will be created. But in my case, the status of the normal correction is set to "To be Tested" but the "transport of copies" is not getting created parallelly. If i go to task list and execute the task "Create transport of copies", the "transport of copies" is getting created.
How to automate this task in the task list, so that when ever, i execute the action "Complete development", it set the status of the normal correction as "To be Tested" as well the "Transport of copies" also getting created in background?
Your guidance will be very much appreciated.
Thanks
Kumar

Dear Kumar
I think it's related to how the transport request was made, if it was made in se01 for example and not by ChaRM I think you don't have the automatic creation of transport of copies. Is that the case that your transport request was created outside ChaRM ?
Please check following SAP notes:
Note 1150426 - Registering transport requests in ChaRM
Note 1134993 - Checking transport requests outside ChaRM
Kind regards
Tom

How to use transport of copies

Hi Friends,
My requirement is to transport se38 programs from one Development client of one server to Development client of another server using transport of copies.
any idea on this requirement.
good answers reward points.
Thanks,
Vamsykrishna.

Hi ,
You can try Download/Upload of transports.
Try this
http://it.toolbox.com/wiki/index.php/Upload_and_download_SAP_transport_request
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c9efcc85-0601-0010-c280-9880dc7c23db
Regards,
Aj

Transport of copies delete customizing z

Similar Messages

Maybe you are looking for