Transport of design objects going to Closed and not transportable

Hi'
we are using CMS to transport in XI. Now im facing a problem, I need to transport some changes to QA, but when I activate my changelists they go to status closed and not Transportable.
Any hints?
Kind regards
Mikkel

You should still be able to right click > export to CMS.
Unless some config is missing in CMS.
Have you used this before?
This helps explains the status and why this happens:
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/frameset.htm

Similar Messages

  • Closed Activities not transported - How to get stuff into new track?

    Hi, folks!
    We encountered some problems with an SCA-export from ASM system leaving some not transported, but closed activities on DEV CONS behind.
    How can we arrange to integrate the content of these closed activities, which don' t show in CMS any more, into a new track?
    Regards,
    Thomas

    Hi, Pascal!
    I meant the assembly system. The activities haven' t been transported, but seem to be closed in CMS.
    To clear the situation a little more, let me explain what has happened: A colleague created a SCA, deployed it on a runtime system and found out that some screen elements, which were present on development runtime system, are missing.
    We figured out that there are some actitivies haven' t been transported to assembly system and are yet closed and not available for transport in CMS.
    Now, our two questions would be
    1) will releasing and trasnporting dummy activity to assembly to force all changes reach SCA work?
    2) will copying the source DC DTR workspace to destination workspace work? (we have problem not being able to delete folders in DTR as they are created by CMS)
    Regards,
    Thomas
    Edited by: Thomas Wuercher on Sep 24, 2009 4:08 PM

  • My Ipod was in my back pocket and when I took it out it has a white screen with 3 grey lines going threw it, and not even 5mins before, it was working fine... what could i be? it also isnt hooking up to itunes... please help

    My Ipod was in my back pocket and when I took it out it has a white screen with 3 grey lines going threw it, and not even 5mins before, it was working fine... what could i be? it also isnt hooking up to itunes... please help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • The itunes on My new iPad keeps going to podcasts and Not to music or videos

    The itunes on My new iPad keeps going to podcasts and Not to music or videos?

    I had the same problem with my iPad, i couldn't get the newer version of itunes because the computer was too old and my iPad couldnt sync with the old itunes. I got a PC from school a few months later so that solved the problem for me. Unfortunately i don't think there would be a program to put your music on your iPod, iTunes should be the only way to transfer files to Apple devices. What operating system are you running and what version of it is it?

  • If i turn off wifi my phone only goes to Edge and not 3g by default?!?!

    I have a very wierd problem with iphone. mine isn't about 3g reception, as i get eprfect reception. the problem is if i turn on wifi and am connected to a network, once i tun off wifi or get out of wifi range, my phone will automatically revent to Edge, and not 3g. i have to go into network settings and disable, then re-enable 3g, and then 3g works perfectly. even if wifi option is on but im not connected to wifi, this works fine. but if and when i connect to a wifi network, suddenly my phone starts reverting back to edge when i either turn off wifi or move out of wifi range. i then have to disable and renable 3g for it to default back to 3g
    whats the deal here!! this seems to be a glitch in the system. anybody else facing this problem?? im on 2.1 and i didn't have this problem with any of the previous 2.0.1 or 2.0.2 and was getting eprfect 3g every time.

    I think reverting to Edge when in sleep mode is by design.
    It make sense when you think about it. Why would you need 3G data speeds for a phone that is sleeping?
    But it should pop back to 3G when you open the phone.
    I have another thread where ACTIVE Edge transmission streams block switching to Wifi.
    This sounds like all part of the same problem. It sounds like Apple reverted to the lowest power radio when in sleep mode, but has still not perfected the switching upon awakening.
    If you wake your phone, but do NOT slide the Un-lock slider till you see 3G/wifi it seems to work better. However, it it doesn't work in 6 seconds, its not going to work at all in my experience.
    Switching to 3G is so time consuming (not only MY time to initiate it but also the time it takes to actually wait out the "No Service" to get to a 3G icon) that I use very little 3G at all. I'd rather have a solid Edge reliability and
    wifi than a flaky unpredictable and very limited coverage 3G. I think I wanted a iPhone V1.5 (half way between V1 and V2. Keep the 3G, its the source of a lot of headaches on this board).
    In 3 years it might be different as 3G spreads, but right now 3G is not worth the trouble and expense given the plethora of free wifi.

  • Edit smart object open in preview and not ai...

    Hello,
         Al working on a layout with CS4 master collection.  In PS I pasted an ai as a smart object.... But now when I edit the smart object it opens in preview and not AI.
    Any thoughts?
    thanks

    The matter has come up recently already, a forum search turns up:
    http://forums.adobe.com/message/2416222#2416222
    So unless updating the OS helps the problem may be persistent.
    A work-around may be to Export Contents, edit in Illustrator, save that and then Replace Contents back in Photoshop.

  • When i text certain people their reply goes to macbook and not my phone

    i think i have deactivated iCloud on my phone and my macbook but texts from certain peoples replies are going to my macbook and not my phone so i can't see the reply
    i need help getting them back on the phone!

    Hi swirly74,
    I would suggest that you review the information in the following article and make sure that your iMessage addresses are all shown in the area of settings labelled "Send & Receive At":
    iOS: Using Messages
    http://support.apple.com/kb/HT3529
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Keyboard events going to InDesign and not on textbox

    Hi,
    I have ported a project from InDesign CS2 to InDesgn CS3 on Mac. I have dialogs in rsrc file (not converted to nib file) which I am also using on XCode.
    Now the problem which I am facing is that when typing in a textbox then keyboard events are going to InDesign and only those events which are not handled by InDesign is received by my textbox.
    Has anyone experienced the same problem before?
    Any help will be appreciated.
    Regards,
    Rahul Rastogi

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
    <br />
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Force closing and not updating apps

    Why does my phone keep force closing and it's not able to update the Facebook app so it's just stuck!

    1. Check iTunes and see if you have a pending/stalled download e.g. Podcast, Books, Music, Movies or iTune U. Finish off the download and you should be able to update.
    2. Connect to iTune; and Check for available download (under Store). When download is completed, sync to iPad.
    http://i1224.photobucket.com/albums/ee374/Diavonex/f5c1b271.jpg

  • Recovering closed and (not saved?) doc in lion

    oof. can anyone help me think of a good way to get back my work?!
    i just spent the better part of the morning creating an important document for my business and of course i have been getting errors in my Time Machine backup for the last two days and rather than fix this i kept working.
    i am thinking that i either had an /existing/ document open or that i DUPLICATED this document so that i would not over-write the old one and that i was working on the new duplicated document(?!). obviously i am still totally perplexed as to how Pages works in Lion as i have not had the time to work in it. but this document is UBER important and i really don't want to spend the time recreating it if i don't have to.
    the situation is that i had a document open in Pages (i am on LION) and i then opened a NEW document and cut work from the document i was working on and pasted this into the NEW document.
    when i went back to the old document i think it said "untitled" (?!) - or something - and since i didn't see any data in it i was thinking it was a second NEW document that i had opened by accident (and of course i /thought/ i saw my original document that i was working in hanging out on the left of my screen) - so i closed and clicked don't save.
    any options here? i am not sure i even remember the name of the original that i am trying to recover to be honest...

    working on the chain gang in lion today and pages (with my Time Machine down b/c i am reconfiguring things and it is giving me an error).
    here is something /not/ to do in pages - which only /seems/ convenient because you don't understand (or like) the new revert/duplicate Regime (note capital R):
    1. open a document that you want to edit and copy out the info you want.
    2. open a new document in pages and paste in that copy.
    3. work for the better part of a morning until the afternoon on this new document titled "untitled".
    4. now open another new document because you have a portion of text that you need but which you don't want in the document you are working in and cut and paste this into another document.
    5. save this document to your desktop because it is basically finished.
    6. go back to the document you were working in, see that there is no information in there - and /think/ that you see the document you were working in hiding in another window - and imagine that this "untitled" document is one that you opened accidentally.
    7. close this document and don't save.
    document disappears and time machine is not working. no recovery.
    anyway, not totaly sure if that workflow used to make sense in snow leopard but it definitely got me tripped up today in lion...

  • RMAN backup goes to filesystem and not to ASM diskgroup

    Hi,
    DB: 11.2.0.1
    OS: Linux
    Parameter configured in database:
    SQL> show parameter db_recovery_file_dest
    NAME TYPE VALUE
    db_recovery_file_dest string +BACKUP
    db_recovery_file_dest_size big integer 10184M
    If i execute the command " RMAN> backup database; " , then the backup ( backup pieces) is going to +BACKUP destination and this is as expected.
    But, if i execute the same command using script, then the backup pieces are going to filesystem(default location $ORACLE_HOME/dbs ).
    Could you suggest me(if i understood wrongly), why the backup pieces are going to the location of filesystem , and not to the ASM diskgroup ?.
    I want to take the backup to ASM diskgroup, because of less space at filesystem.
    The script i used is this:
    [oracle@rac1 rmanscripts]$ more online.sh
    export ORACLE_SID=test;
    export NLS_DATE_FORMAT='dd/mm/yy hh24:mi:ss';
    umask 022
    date
    rman target / cmdfile online.rcv msglog online.log
    [oracle@rac1 rmanscripts]$ more online.rcv
    run {
    backup
    full
    tag b_db_full_test
    filesperset 2
    format 'df_%d_%t_%s_%p'
    database include current controlfile;
    Thanks in advance,
    Regards,

    Hi mseberg,
    Thanks for your reply and the thing is that the controlfile autobackup is going to ASM diskgroup ( +BACKUP).
    Even after changing the suggested config, no luck to me.
    RMAN> show all;
    RMAN configuration parameters for database with db_unique_name TEST are:
    CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 15 DAYS;
    CONFIGURE BACKUP OPTIMIZATION ON;
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '+BACKUP';
    CONFIGURE DEVICE TYPE DISK PARALLELISM 3 BACKUP TYPE TO BACKUPSET;
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/home/oracle/app/oracle/product/11.2.0/dbhome_2/dbs/snapcf_test.f'; # default
    Backup piece destination info from log is here:
    channel ORA_DISK_2: finished piece 1 at 16/02/13 22:41:22
    piece handle=/home/oracle/app/oracle/product/11.2.0/dbhome_2/dbs/df_TEST_807575973_155_1 tag=B_DB_FULL_TEST comment=NONE
    channel ORA_DISK_2: backup set complete, elapsed time: 00:01:49
    Finished backup at 16/02/13 22:41:22
    Starting Control File and SPFILE Autobackup at 16/02/13 22:41:22
    piece handle=+BACKUP/test/autobackup/2013_02_16/s_807576082.342.807576083 comment=NONE
    Finished Control File and SPFILE Autobackup at 16/02/13 22:41:25
    I cannot understand why this is,
    Regards,

  • HT201442 iphone 4 runs incredibly slow and lags after upgrading to iOS 7 even when half the memory is empty and the background aps are closed and not refreshed. need to downgrade on iOS 6.1.3 please help

    my iphone 4 16GB runs very slow after i have upgraded it to iOS 7.
    the animations and stuff lag very much and i am irritated using the phone.
    i want to downgrade to ios6 but apple does not allow that. what is the solution?

    just been contacted by apple to try going to settings>icloud>documents and data and turn it OFF
    THIS HAS WORKED!! thank you apple, you have kept a customer happy. hopefully this will solve your problem too

  • Pie Charts causing Design mode to give warning and not preview the app

    I am using the final release. I have pie charts in my app. I
    also have column charts. Both are fed data the same way. Both work
    as expected when i build the app, and there are zero errors in the
    app. however, i was experiencing an issue in flexbuilder where in
    design mode, a vague warning was issued and the preview could not
    be displayed (blank except for very gernal 'outlines' of the layout
    and controls)
    I narrowed the problem down to the pie charts. Is anybody
    experiencing this problem? The application worked as expected, and
    previewed as expected in Design mode when previewd/built in Beta
    3.

    Hi masavran,
    For this issue, it's related to the render environment (browser/application). On Reporting Services side, we don't have any properties to change the resolution for chart to make it smoothly. We suggest you post this thread on Visual Studio forum
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=visualstudiogeneral&filter=alltypes&sort=lastpostdesc
    Or the forum of corresponding browser.
    Best Regards,
    Simon Hou

  • Computer randomly goes to sleep and not waking up

    My computer randomly goes to sleep-while I'm using it, and it won't wake up. Any suggestions? Is it something I'm doing?

    Check temperatures by using Temperature Monitor -application. Atleast Macbook did this when there was problem with temps, cleaning heat sink and reapplying thermal solved the problem. G5 -based iMacs are known for running very hot temperatures and there was all kinds of motherboard failures as well as power supplies going bad.

  • When I bookmark a web page it now goes into favorites and not bookmark. How can I get it back to bookmark?

    When I bookmark a web page now it goes in favorites, not the bookmark section. I don't know why thisvis happening but I want to get back to the bookmarks. Ehat can I do?

    Tap to enlarge imade.

Maybe you are looking for