Transport of gui status

Hi there,
I have attempted to deploy some ABAP code which was developed in 4.7 into a 4.6b environment. Mysteriously the GUI statuses have not gone with the transport. Does this need to be added explicitly to the transport objects when going across versions like this ? Is it to do with the way objects are organised in packages as oppose to dev classes ?
(When I deployed the code in another 4.7 box it worked fine)

Hi Richard,
I would suggest you to look up in SE11 transaction, for table <b>E071</b>, check for object type '<b>CUAD</b>' <-- GUI Status for your program name in your 4.7 box.
Regards,
Subramanian V.

Similar Messages

  • Transporting translated GUI status

    Hi All,
    We are doing some translation of GUI status of certain programs in se63. The translations are recorded in a TR using the program RS_LXE_RECORD_TORDER after activating the GUI status. All these are done in source system (dev system)
    Now when we release the TR to test system(Target System),
    we need to activate each GUI status in target system . Then only it is appearing in the interface.
    Is there any way so that we can avoid the activation of each and every GUI status in the target system ?
    Could you please help out us?
    Regards,
    Arun

    Hi Arun,
    I think, I'm a little bit late for this issue...
    Seems there's a problem with the CUA-Load: Run report RSLANG20 on the target system and afterwards refresh the CUA- and DYN-buffer by entering /$CUA and /$DYN at the okcode-field.
    HINT: Read note #110910 before.
    Best regards,
    Thomas

  • Transport Screen objects-GUI status(SAP does not create request, why)?

    Hi experts,
      I use SE80 to change GUI status, but system does not create a transport request for me to transfer? why?

    Hi,
      Thanks for replay. Actually, the SE80->program->Gui status have some objects and they are already transfered. But I can't see them on target system. But When I create exactly the same name, the system tell me they are already created. I think it becuase the original language is 'DE' but I use default language 'EN' to modify and create the request?

  • Transport GUI Screen (SE51), GUI-status (SE41) and Titlebar - how?

    Hi,
    Please help me with the following:
    How do you transport the following objects:
    GUI Screen (SE51)
    GUI-status (SE41)
    Titlebar for the GUI
    Thanks,
    John

    You can not create a screen or gui status or gui title without having a program, so there is always a reference to the program.  If you go to SE80, and enter your program name, and hit enter, you will see folders for the screens, gui statuses, and gui titles.  
    The code in your PBO is simply saying that you want to use those for that particular screen, they must already exist in your program.
    In reality, you should always create all of the objects of your program in SE80, and forget about SE51 and SE41,  in doing so you will see how all of the objects of your program are together when using SE80.
    And yes, to confirm, the screen and gui status/titles will be transported with your program.
    Regards,
    Rich Heilman

  • Transporting GUI status translation

    Hi All,
    We are doing some translation of GUI status of certain programs in se63. The translations are recorded in a TR using the program RS_LXE_RECORD_TORDER after activating the GUI status. All these are done in source system (dev system)
    Now when we release the TR to test system(Target System),
    we need to activate each GUI status in target system . Then only it is appearing in the interface.
    Is there any way so that we can avoid the activation of each and every GUI status in the target system ?
    Could you please help out us?
    Regards,
    Arun
    Message was edited by: Babu Arun

    hi Paulo,
    check if the translation was transported into Q system. When you do it in DEV and save it, the system does not ask for transport request automatically, so if no transport request exists, than won't be transported automatically. In this case you have to transport it on your own.
    ec

  • How to download GUI status and then upload to another system?

    Hi,
    I have a requirement to copy a module pool program to another system (different system, it cannot be transported to that system)
    We have options to download/upload programs/screens in SE38 and SE51. But, I couldn't see any such option in SE41.
    Is there any other way to download GUI status from SE41 and then use that file to upload in other system?
    Thanks in advance.
    Regards,
    Arun Mohan

    Hello Arun,
    If the object's transport order has been released, you can ask your basis person to download and import that request files(Co file + Data file) from the current system to the new system.
    This is the easiest possible way to achieve your requirement.
    Regards,
    Karthik D

  • Can anyone tell me how to use GUI status in ALV report.

    Can anyone tell me how to use GUI status in ALV report. I want to use  buttons in ALV report.

    Juheb,
    see the link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5e/88d440e14f8431e10000000a1550b0/frameset.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
    Adding a button on the ALV grid using OOPs
    check these sites.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/webDynproABAP-ALVControllingStandard+Buttons&
    chk this.
    alv-pfstatus:
    http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_pfstatus.htm
    then how to capture that button click.
    http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_ucomm.htm
    REPORT ZTESTALV.
    TYPE-POOLS: SLIS.
    *- Fieldcatalog
    DATA: IT_FIELDCAT  TYPE LVC_T_FCAT,
          IT_FIELDCAT1  TYPE SLIS_T_FIELDCAT_ALV..
    *- For Events
    DATA:IT_EVENTS TYPE SLIS_T_EVENT.
    DATA:  X_FIELDCAT  TYPE LVC_S_FCAT,
            X_FIELDCAT1  TYPE SLIS_FIELDCAT_ALV.
    DATA:X_LAYOUT TYPE LVC_S_LAYO.
    "{ FOR DISABLE
    DATA: LS_EDIT TYPE LVC_S_STYL,
          LT_EDIT TYPE LVC_T_STYL.
    "} FOR DISABLE
    DATA: BEGIN OF IT_VBAP OCCURS 0,
          VBELN LIKE VBAP-VBELN,
          POSNR LIKE VBAP-POSNR,
          HANDLE_STYLE TYPE LVC_T_STYL, "FOR DISABLE
       <b>   BUTTON(10),</b>
         END OF IT_VBAP.
    DATA: LS_OUTTAB LIKE LINE OF IT_VBAP.
    SELECT VBELN
           POSNR
           UP TO 10 ROWS
          INTO CORRESPONDING FIELDS OF TABLE IT_VBAP
          FROM VBAP.
    DATA:L_POS TYPE I VALUE 1.
    CLEAR: L_POS.
    L_POS = L_POS + 1.
    <b>X_FIELDCAT-SELTEXT = 'Button'.
    x_fieldcat-fieldname = 'BUTTON'.
    X_FIELDCAT-TABNAME = 'ITAB'.
    X_FIELDCAT-COL_POS    = L_POS.
    X_FIELDCAT-OUTPUTLEN = '10'.
    X_FIELDCAT-style = X_FIELDCAT-style bit-xor
                      cl_gui_alv_grid=>MC_STYLE_BUTTON bit-xor
                      cl_gui_alv_grid=>MC_STYLE_ENABLEd.
    APPEND X_FIELDCAT TO IT_FIELDCAT.
    CLEAR X_FIELDCAT.</b>
    L_POS = L_POS + 1.
    X_FIELDCAT-SELTEXT = 'VBELN'.
    X_FIELDCAT-FIELDNAME = 'VBELN'.
    X_FIELDCAT-TABNAME = 'ITAB'.
    X_FIELDCAT-COL_POS    = L_POS.
    X_FIELDCAT-EDIT = 'X'.
    X_FIELDCAT-OUTPUTLEN = '10'.
    x_fieldcat-ref_field = 'VBELN'.
    x_fieldcat-ref_table = 'VBAK'.
    APPEND X_FIELDCAT TO IT_FIELDCAT.
    CLEAR X_FIELDCAT.
    L_POS = L_POS + 1.
    X_FIELDCAT-SELTEXT = 'POSNR'.
    X_FIELDCAT-FIELDNAME = 'POSNR'.
    X_FIELDCAT-TABNAME = 'ITAB'.
    X_FIELDCAT-COL_POS    = L_POS.
    X_FIELDCAT-EDIT = 'X'.
    X_FIELDCAT-OUTPUTLEN = '5'.
    APPEND X_FIELDCAT TO IT_FIELDCAT.
    CLEAR X_FIELDCAT.
    L_POS = L_POS + 1.
    "{FOR DISABLE HERE 6ROW IS DISABLED
    SY-TABIX = 6.
    LS_EDIT-FIELDNAME = 'VBELN'.
    LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
    LS_EDIT-STYLE2 = SPACE.
    LS_EDIT-STYLE3 = SPACE.
    LS_EDIT-STYLE4 = SPACE.
    LS_EDIT-MAXLEN = 10.
    INSERT LS_EDIT INTO TABLE LT_EDIT.
    *LS_EDIT-FIELDNAME = 'POSNR'.
    *LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
    *LS_EDIT-STYLE2 = SPACE.
    *LS_EDIT-STYLE3 = SPACE.
    *LS_EDIT-STYLE4 = SPACE.
    *LS_EDIT-MAXLEN = 6.
    *INSERT LS_EDIT INTO TABLE LT_EDIT.
    INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
    MODIFY IT_VBAP INDEX SY-TABIX FROM LS_OUTTAB  TRANSPORTING
                                      HANDLE_STYLE .
    X_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.
    "} UP TO HERE
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
      EXPORTING
        I_CALLBACK_PROGRAM = SY-REPID
        IS_LAYOUT_LVC      = X_LAYOUT
        IT_FIELDCAT_LVC    = IT_FIELDCAT
      TABLES
        T_OUTTAB           = IT_VBAP[]
      EXCEPTIONS
        PROGRAM_ERROR      = 1
        OTHERS             = 2.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Don't forget to reward if useful....

  • Gui status - upload / download

    Hello All,
    Is there any way where I can download GUI status from one system and upload it to another system ?
    Thanks in advance,
    Senthil G

    Hi Senthil,
    Gui status is tied directly to programs, so that said, you want have to tie this gui status to a program, then transport the program. So if you have a gui status that you want to use that is tied to standard program, create a "Z" program, then you can copy the gui status from the standard program to the "Z" program. Now you can transport the "Z" program to this other system, then you can copy the gui status from the "Z" program to where ever you need it in the other system. Make sense. I'm assuming that this other system is outside of the DEV->TST->PRD heiracrchy.
    You can copy the gui status using SE41. Click User Interface, Copy, Status.
    Regards,
    Nitin.

  • Can a GUI Status be downloaded to disk?

    Hello,
    I need to copy a Gui Status from one system to another. (there is no transport route)
    Does anyone know if there is some method to download it to disk and upload to a different machine?
    Thx.
    Andy

    Check these fm
    RS_CUA_INTERNAL_FETCH -> download
    RS_CUA_INTERNAL_WRITE -> upload
    a®

  • How to get GUI Status(Push Buttons) in ALV Report

    Hi Friends
    I have a requirement in a way that:
    Once selection-screen was processed,an ALV report has to come and above the ALV List,I need a custom GUI Status(4 Push Button) with Push Buttons Logic.
    Once I had clicks on thesse push button,I need to display one more ALV List and above this List,again I need a custom GUI Status(2 Push Buttons) with Push Buttons Logic.
    Can anyone throw some light how we can achieve this.
    Thanks for your cooperation!
    Regards,
    Madisetty

    data: rt_extab type slis_t_extab,
            g_ucomm like sy-ucomm ,
            g_selfield type slis_selfield.
    form alv_display .
      call function 'REUSE_ALV_LIST_DISPLAY'
         exporting
         i_callback_program             = g_repid
         i_callback_pf_status_set       = 'PF_STATUS'
         i_callback_user_command        = 'USER_COMM'
           it_fieldcat                    = it_fldcat
          tables
            t_outtab                       = it_final1
      perform pf_status using rt_extab.
      perform user_comm using g_ucomm g_selfield .
    endform.  
    form pf_status  using    p_rt_extab.
      set pf-status 'PF_STATUS' excluding p_rt_extab.
    endform.
    form user_comm  using    p_ucomm like sy-ucomm
                             p_selfield type slis_selfield.
      data: l_row type i.
      case  p_ucomm.
        when 'DISPLAY_PO'.
          loop at it_final1 into wa_final1.
            if wa_final1-sel eq 'X' .
              l_row = l_row + 1.
            endif.
            if l_row gt 1.
              message e004.
            endif.
            clear wa_final1.
          endloop.
          p_selfield-fieldname = 'SEL'.
          read table it_final1 into wa_final1 index p_selfield-tabindex .
          set parameter id 'BES' field wa_final1-ebeln.
          call transaction 'ME23N'.
      endcase.
    endform.
    *create user interface for gui status by double clicking on 'PF_STATUS'.
    *Check the above sample code .

  • How to put separator lines in menu items in a gui status ?

    Hi,
    I have created gui status for my z transaction
    I need the separator lines in the menu items like it is seen in std transactions
    For example, in any screen , in the Help menu, we can see the following.
    Application Help
    SAP Library
    Glossary
    (line)
    Release notes
    (line)
    SAP Service Marketplace
    could you please help me how to put the lines ?
    thanks

    Hi,
    Goto Your GUI status.click on your  MENU bar.
    under the menu bar you will have your own menu items.
    where ever you want separator line  do the following way.
    you will have 2 columns under menu bar
    1) code
    2) text.
    under code dont put anything.
    but under text column you put dashes and enter or select right click there and choose separator line.
    you will get separator line.
    activate and run the ztcode.you will get .
    code                                            text
    Application Help                         
    SAP Library
    Glossary
    Release notes
    SAP Service Marketplace
    Thanks
    Parvathi

  • How to translate function codes from GUI-status into other language ?

    Hello experts,
    I've a programm called mrs - multi resource scheduling.
    This programm has texts in english and german.
    Now I want to translate the text also in italian.
    When I opne the programm in se80, in path GUI-status
    there are the ui-elements (Function codes).
    When I open them in english, I get the texts in english, when
    I open them in german , I get the texts in german.
    Openeing in italian shows me the english texts.
    Changing them into italian I get message:
    You can only maintain the object in modification
    lang. German (DE) in this system
    If I proceed in translating the german text in italian, I get italian texts instead of german.
    Some ideas ?
    Thanks Gerd

    Use [SE63|https://www.sdn.sap.com/irj/scn/advancedsearch?query=se63&cat=sdn_all].([Translating Objects Directly|http://help.sap.com/saphelp_nw04/Helpdata/EN/41/71601b3ab0f34a8e00aa01338c68f3/content.htm]) else work on a system where italian language is installed.
    Regards

  • Add Button to GUI STATUS Application toolbar

    Hi,
    I have to add a button in the application toolbar of a gui status. I have done that many times before, but I never got into trouble like this time....
    When I open the Gui status and the tree for the application toolbar, I can see already set buttons. When I now click on change (a modification warning comes) and press the plus-icon, it is possible to enter a new item. But everything I´m typing, I get the message Function code XXXX has not been assigned to a function key. I have never got this before....
    When I now go to SE41 and enter a new function key, I can´t use it either afterwards as a button in the application toolbar.
    In the tree of the function keys, I can´t change anything...
    What can I do here? The program name is SAPMZLCG, so it has been modified sometimes. But how can I change the GUI STATUS now to add a new button?
    Thank you!

    You need to goto the application toolbar and the add your text to the items and click below the text you will get one popup which will ask for static text and dynamic text. select statictext and then add all the information like text name and if you want to add an icon you can do it aswell. the there will be another popup for fuction attributes where you will be able to find some options loke fuction types and reaction need to select all that and then click on the ok button and save check and activate the same and after that activate and check whether the button is visible or not. once the button is visible then you need to check for the ok_code and sy_ucomm and then insert the fuctionality of the button.
    I hope this might solve your problem.

  • Gui status (AT USER-COMMAND) trigger at first

    Hello all,
    I wrote a basic list  shown below.
    In it , AT USER-COMMAND and AT LINE-SELECTION events are used all.
    when i double click on line in the list, I think the at line-selection should be trigger at first. but  in fact ,the AT USER-COMMAND trigger.
    and the sy-ucomm get the first button value in the GUI-STATUS BAR(There's only one button on it).
    how can i solve it .
    any answers should be appreciated.
    START-OF-SELECTION.
      SET PF-STATUS 'ZSATMM24F1'.
      write :  \ 'aaaaaaaaaaaa'
      write :  \ 'aaaaaaaaaaaa'
      write :  \ 'aaaaaaaaaaaa'
      write :  \ 'aaaaaaaaaaaa'
    AT USER-COMMAND.
      CASE sy-ucomm.
        WHEN 'TO_a'.
          PERFORM to_a.
      ENDCASE.
    AT LINE-SELECTION.
      write : 'test'.
    best regards,
    daniel.

    Please make sure to add the fcode PICK to the F2 function code in your gui status and try again.
    Regards,
    Rich Heilman

  • Any ideas for GUI status manipulation?

    Hi All,
    I have a requirement with me, which I'm not able to figure out how to achieve. Here goes:
    There's a transaction in ERP system (CO11N) which was originally not designed (it seems) to be used with CALL TRANSACTION kind of way. But now a requirement is to call it that way... I guess I can do that anyway by passing the SET PARAMETER for the key input fields...
    But there's also another requirement that when calling the transaction this way, make sure two of the application toolbar buttons should be disabled. And they should be enabled when the transaction is called directly from the command bar (as /nCO11N).
    I don't have any set/get parameters to check for and disable/enable the GUI status Fcodes with it...
    Can someone please give me some pointers as to how this can be achieved?
    Thanks in advance!
    Mithun.

    Hello Jonathan,
    Thanks a lot for the quick tip.
    I thought of this technique as well... But then figured that using this 'export to memory' technique is not a very recommended way...
    Thus I want to keep this way as a last resort for the time being... But would like to know if there is any better way to achieve the same effect without using the shared memory sort of technique.

Maybe you are looking for