Transport of ID objects

Hi,
I have a very basic doubt. As we know we have two ways of tranporting objects in PI. CTS and File system. When we want to transport the ID objects alone, i.e there are no IR objects for the scenario, can we do a file transport itself? And when we import the ID objects by means of configuration scenario, will the communication channels ger imported along with the credentials?
Regards,
Lavanya R

Hi Lavanya,
>>>When we want to transport the ID objects alone, i.e there are no IR objects for the scenario, can we do a file transport itself?
Yes, of course you can do a file transport of the ID objects where a .tpz file will be generated. You can either download the tpz file in the local system if you select 'Client' while exporting objects or in the standard server location if you select the 'Server' option while exporting through File System.
>>>And when we import the ID objects by means of configuration scenario, will the communication channels ger imported along with the credentials?
Yes the credentials and settings maintained in the Communication Channels will not be imported....so its better to uncheck the option "Automatic Activation" while importing the ID objects to in the target system and activate the same post reconfiguration of the channels..
Regards
Bikash

Similar Messages

Error in Transport the info object

Dear all,
i am trying to transport the info object 0CM_CTAR
during transpot i am getting the error as
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
but i checked in development i not got any error but when i am trasport iam getting error.
Regards,
siva.

HEllo,
Please see these OSS Notes
1139547 - Transport of InfoObjects RC = 8
1100575 - InfoObjects: Using units in compounding
The other way is to use a Z* object referenced to needed unit object in the compouding,
Regards,
Shashank

How to create transport request in object transport

How to create transport request in object transport from server to server
thanks in advance
arya

hi,
when ever u r creating any object in devlopment and saving it will ask for request.create request and release in se09.
put mail to basis people to transport ,thy will transport using STMS transaction.

Unable to transport Integratin Builder objects from Dev to QA correctly

Hi,
System : Pi 711 SPS03
SLD 7.1 with latest model and content
We are trying to transport Integration Builder Objects from Dev to QAS, but the SID translation from DEV to QAS is not working.
The interface is being imported as the source SID.
We checked the SLD configuration for Transport targets, that is when we realised the below issue.
Unable to Assign Business Systems in respective Business System Groups
The expected configuration of the SLD is as below:
UKD_400 - Integration Server for Dev PI 711 server
INTEGRATION_SERVER_UKQ - Integration Server for QAS PI 711 server
XI_QA - Business System Group for all Quality Systems in the landscape
          1) UKD_400
          2) UC1_ECC_60
          3) UED_400
XI_DEV - Business System Group for all Developement Systems in the landscape
          1) INTEGRATION_SERVER_UKQ
          2) UC2_400
          3) UEQ_400
We are unable to put the business systems in their respective groups
All the Business systems are either being assigned in XI_QA or XI_DEV
Please let us know if this is a product error in SLD 7.1, could not find any relevant notes
Thanks,
Govind
Edited by: Govind Prathi on Feb 12, 2010 10:25 PM
Edited by: Govind Prathi on Feb 12, 2010 10:27 PM

We have already assinged the Integration server to their respective business system groups while creating the Business system groups.
   BSG: XI_DEV --> UKD_400( Integration Server DEV )
BSG : XI_QA ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
Please help me understand if i am something in the configurations.
Thanks
Govind

Transporting of z objects form Older version(4.6c) to newer version(ecc6.0)

Hi All,
Now i am involving in Technical Upgradation from 4.6C to ECC60.I want to know some information regarding transportation of Z objects in older version to newer version(ECC6.0).Please help me in this regard.
like tables,dataelements,domains,reports,scripts,smartforms,userexists,Variants,report layouts(all are z objects),text elements.In the above list which will be transported automatically and regarding which abapers have to takencare i mean to say which will be not transported automatically...
and tell me obsolete keywords information..which will be obsoleted in ECC6.0...
thanks in advance
awaitinf for reply..
Points will be Rewarded for helpfull Answeres
Thanks & Regards
Samit

Hi Julio,
you can find the answer in the SAP note
Note 552711 - FAQ: Client copy
point 4.
So the answer is : NO
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

Transport of config objects...business system prblem...

Hi Gurus,
We want to transport dev and config objects from XI qua to a XI test server... we hav successfully transported all design objects...but we are facing problem while transporting the config objects because of business and technical system issue....the business system in quality points the ECC quality....how can i tranposrt the config objects with same business system name....is there any way??
Thnx in advance...

Hi,
This will be Maintained in SLD .You know what will be Business system name in Quality or Production.
While Creating Business system you need specify in the Transport Tab which is your Target Business System and also the Group like Production or Quality ,
When you do transport from Development and for the Dev_Bs (Bussiness system ) if you assign the Qaulity System Bussiness system ,it automatically move the object under Quality Business System.
if this setup is done in SLD when you do transport the Configuration Object It Automatically assigns the Quality and production Business System if you are doing Transport from Dev Respectively.
hope this helps.
Thanks,
Madhu
Edited by: Madhusudhan Honnappa on Sep 3, 2009 8:11 PM

Transport Layer and Objects

what is the relation between the objects of a transport request and the layers in a transport domain?

Dear Abhishek,
First of all a I have to explain packet:
Packet
A packet groups Objects of the Development. Any report or table or data element … belongs to a packet. So every repository element is connected with a packet.
Transport route
A transport route describes the direction a transport can be transported. For example if you want to transport a transport from development to a test system, you have to configure in TMS a transport rout from development to the test system.
Transport layer
A transport layer connects packets to transport routes.
The connection between packet, transport route and transport layer is:
Objects of Development (Programs or Reports or Tables …) <-> packets <-> transport layer <-> transport route <-> systems
If you develop a report in development system and want this report to be transported to the test system you need:
-to connect the report with a packet.
-to connect this packet with a transport layer
-to connect this transport layer to the transport route that is connected to the both system and describes the direction FROM(development system) TO(test system)
For an exact description see:
http://help.sap.com/saphelp_nw04/helpdata/EN/57/38de0c4eb711d182bf0000e829fbfe/content.htm
Best regards
Willi Eimler

Transportation of SPROXY objects...

Hi,
I want to transport XI objects from DEV to PRD. This scenario uses client proxy side. Now i would like to know if there is any way to transport to sproxy objects such as Class, DT, MT, Structures .....or we have to login to PRD and create proxy again there manually.
Please help....

Hi,
No Need of Any SPROXY Activities again in Production Server
1) Transport the Objects which were saved under the Package, which was created at the time of SPROXY activites.
This includes t the Report Program which u wrote in Se38 of DEV or QTY
And also will contain the Proxy Generated Objects
Once you have made the Proxy settings in Production R/3 server and you transported the Objects which were saved under the proxy package request to Production server means you will be able to see the Proxy generated Objects, no need to generate them agaain
Regards
Seshagiri
Edited by: N V Seshagiri on Jun 16, 2008 12:06 PM

Transporting Change document Object from development to quality

Hi All,
I have created a change document object from SCDO for my custom table. Now I want to transport this object from development server to quality server.
As while creating Objects some enteries are made into standard table CDHDR and CDPOS which is client dependant so how to work this object on another client.
Do I need to create seperate objects on quality server and then on production server?
Thanks

Hi Kiran,
use transport connection to collect the objects to request, rsa1->transprot connection.
use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
remember to assign source system, click yellow box with X icon and mark the source system.
after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
take a look transport docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Re: Transport Organizer---
transport query (bex objects)
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
hope this helps.
(Courtesy AHP from Re: transport)
Bye
Dinesh

How to transport an LSMW object from dev to Quality and to Production?

hi All,
Could any one please specify how to transport the lSMW object from developmen to Quality and finally to Production?
Thanks in Advance.
Regards.
Abhilash.

Hi,
The "cleaner" way is using normal transport procedure via "Extras->Generate Change Request".
This will transport the entire project though, not possible to transport a single object this way.
step by step
1. Run Tcode LSMW in source system.
2. in the menu bar choose Extras-->Export. Now give the filename and save in your desktop.
3. Now login to destination system. again execute LSMW.
4. Now goto Extras-->Import.Give your file which was downloaded earlier.
5. Now tool bar click on import with diffrent name option and give your new project and subprojectname.
6. Now execute all steps.
Also refer the below link
http://help.sap.com/saphelp_crm50/helpdata/en/da/a22506a3291b418b759524b278dcde/content.htm
Please reward points if it helps
Thanks
Vikranth

Problem in Transport of ID objects using CMS

Hi,
I am using CMS to transport my IR and ID objects from DEV->QA->PROD.
While I am able to transport my repository objects successfully,I do have a problem with trnasport of ID objects.Especially this problem seem to exist only if i try to export individual objects.There isnt any issue for a complete ID transfer which is not my req.
When doing "Release FOr tranpsort" from QA after making the communication channels changes,The object appears in the "assemble " tab.
Ideally Once I assemble the objects,it should diasappear out of assembly page and should be appearing in the "Approval" tab..
But the objects successfully get assembled and dispapper from assembly ,they dont seem to be present in the next approval step.I am unable to track where they are lost.CMS logs doesnt show any error as well.
Any pointers from this issue?
Regards,
Rashmi

Hi,
This will help you,
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/55/7a09d0d7d34b828a9740e322b9222c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/54/8b5b0555264a93a679c2117fedc748/frameset.htm
This PDF file will help you a lot,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Regards
Agasthuri Doss

Transporting LSMW single object instead of entire project

Dear Experts,
When I am selecting LSMW object and then selecting Generate Change Request from Extras, then it is creating Transport request for entire project instead of a single object.
How can i transport single LSMW Object instead of entire project.
Please help me.
Thanks & Regards
Rangababu

Hi,
when you are on the first screen of LSMW, can't you go via Extras->Export Project. Then you can select on detailed level what you want to export to a flat file.
On your other system you can import this flat file (and you can even rename stuff while importing). Not sure, but it might be that the import functionality is blocked on your other system. If not, I think this is the way to go.

Custome Defined Pacakge for transporting the BW Objects

hai
Im going to transport the BW-Objects from the development server to QA server.
I need to 'Custome Defined Package(ZBW)' for this one . So how can i create the Custome Package for transportating the BW objects.
pls tell me , i will assign the points
kumar

Transaction SE80
Select development class and create.
Jaya

Broadcasting scheduling settings not transported along with object BRSE

Hi ,
I transported object BRSE (broadcasting object) with the Transport Connection (RSA1 transaction) from development system to the test one. I also transported previously the object TMPL (the Web Template in which I customized the broadcasting).
The transportation was succesfull, everything was transported Ok except from the broadcasting schedulling settings. I really don't know why?
I'll appreciate any help on this issue.
Best regards,

Hi Alex and thank you for your answer.
The transport log shows this warning:
Event ZSICO_LDM (DC) does not exist; registration of setting Z_ENVIO_QUERY_RECONC_RC deleted
Broadcast setting Z_ENVIO_QUERY_RECONC_RC activated successfully
We don't created any event manually, so we think that ZSICO_LDM is an event that was automatically created.
Z_ENVIO_QUERY_RECONC_RC is our Broadcasting scheduling that sends a query by e-mail.
Now we can see Z_ENVIO_QUERY_RECONC_RC on RSA1 -> Metadata Repository finding the query, but when we open the broadcast settings for this query, it does not appears.
Do you know why?
Thanks a lot.
B.R.

Transport of Security objects in BPC 7.5NW

As a part of NW BPC transports, changed the entries in table UJT_TRANS_CHG. For the 1st transport (from DEV to QA)wanted to transport ALL objects including Security and Teams. So, selected 'Development' for ALL objects under this table.
After the transport collection via tcode UJBPCTR and importing into QA, found that 'Users', 'Teams' and 'Task Profiles' did NOT transport. 'Member Access Profiles' did transport to QA.
I expected 'Users', 'Teams' and 'Task Profiles' also to be transported. We are on SAP BPC 7.5NW, SP4.
Am I missing something here ?
Thanks in Advance.

Hi
we had the same problem and didn't know if Security objects could be transported, but we found the BPC User Mass Management Tool.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0cdbccf-0def-2d10-298d-f4223de9a6ed&overridelayout=true
This could help you to export the security objects in DEV and import the objects in PRD.
The transports you need for the ZUJE_MASS_USER_MGMT Programm you found on page 46 in the document mentioned above.
Please let me know if we could help you.

Transport of ID objects

Similar Messages

Maybe you are looking for