Transport of infoset Query through Report RSAQR3TR

Dear Hcm Gurus
I have created query through sq01 and change functional area sq02 as per requirement in this query
i have created additional fields in infoset in which i also assigned abap field code on newly created data fields
i also assigned new data fields to relavent field group as well
but when i export and import as per mentioned procedures , additional data field are not imported in target client
i have follow steps as mentioned
Step 1
Run RSAQR3TR in 'old' system. Select EXPORT and specify the objects to be transported. (System includes these in an automatically created transport request)
Step 2.
Release this transport and request it be transported to 'new' system. (This results in the entries being populated in transport table AQTDB in 'new' system).
Step 3.
Run RSAQR3TR in 'new' system. Select IMPORT and tick the Overwrite checkbox. Specify the transport number in the field labelled 'dataset with imports'.
Kindly guide me urgently that how additional fields are transported in target client
Regards
Barket Ali Zafar
SAP HCM Consultant
Siemens Pakistan
+92-0300-5521524

yes
but my question is ? that additional data field defineds in functional area /infoset are not importing ?
Kindly guide me urgently

Similar Messages

Transport of infoset query urgent ?

Hi ,
any one can help me on this topic..
i want to transport the infoset query ..
please any body give the steps....regarding this topic..
regards,
goodyear,

Hi,
Goto SE10--> Find your request number (F5) -->ensure that you have all the required objects in your transport -->release all the tasks one by one by selecting the request and clicking on the red truck (F9) and finally release the request by selecting it and clicking on the red truck(F9).
Once you have released it, contact your Basis/Transport Administrators to import into the required target system.
Cheers,
Sree

Transport of infoset query

Hi ,
while i am doing transport in infoset query,i select the infoset and query and next i wnt to transfort and metioned there requried names of infoset &query. i done every thing ok but in SE10 transport organizer ...displaying request is wrong missing the system name and request number..
on this topic any body help me its urgent foe me..
thanks ,
good year..

Hello Good year,
Have you attached the objects to a transportable package?
When you created the transport request, did you make a note of the request number, did the system give any errors or messages while writing the object to the request?
If you do know the request number, goto SE10, and then press F5 and fill your request number and press enter, and then you should be able to see your request.
Cheers,
Sree

Infoset Query Transport

Hi All,
I have enhanced an ECC infoset query.From the data field I have added the new field in to a Field group.After transporting the infoset query in the Data field area the new field is getting reflected but the new field is not getting reflected under the Field Group area,Can anybody tell me how to transport an Infoset query,including the Field group?
Thanks
SREEJA
Edited by: Sreeja SSP on Aug 24, 2009 12:30 PM

Hi,
Can you please let me know how did you resolve the problem?
We have a scenario where in we have to add 17 fields to infoset which we have done. But these fields are not getting reflected in the data source.
Moreover in Infoset field group, if you click on the newly added field. On the below area you will get info about that field. There is a button which displays field queries. When I click on it, it displays messsage as 'No queries found'.
My question is - how to add those queries to that field.
Can you please help?
Thanks
Subodh

How to transport infoset query to Production serveR?

when i transport everything is transported to production server. when i run the transaction in production server it shows me the error saying . PROGRAM Does not exist .. how to resolve this..
can any one help me to transport my infoset query from step-to-step.
Regards
Saad Nisar

Well there is no button as such.
I hope you must have found the Transport button.
When you click it, it gives selection screen there you can find the redio buttons.
Export will create a transport request and Download will download it to local machine.
Let me know if it doesn't work. But you have to do more analysis as to how to go this way.
Regards
Shital

InfoSet Query: Syntax Error while generating the program.

Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.

There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there.

BW Datasource on an Infoset Query based on 2 DSO Active tables

Hello,
We have created a Datasource in the BW system over an Infoset query (through SQ02) built on 2 DSO tables.
In RSA3, this datasource is working fine - it shows us some data (close to 1000 records).
The issue is when i try and run a infopackage for the datasource.
The request times out and no records are fetched.
I have added all the users to the Infoset user group - so, no issue with the authorization.
IDoc Statuses changes from 53 --> 62 --> 64 --> 50.
The extraction process does not complete - does not get the no. of records sent.
Can anybody point to a probable cause here?
Thank you.

IDoc logs do not say much.
Status Record 53: IDoc was successfully transferred
Status Record 62: IDoc passed to application; Direct call started
Status Record 64: IDoc ready to be transferred to application; No filter, no conversion
Status Record 50: IDoc added
Then, it does not go any further.
We're using the Datasource on the Infoset query because we could not use the traditional BW infoset.
Datsource is used to feed a DSO as we directly could not use anything else (we're trying with an expert routine also).
The issue is that the base DSO tables are huge and querying on them (using SELECT) is taking a very long time.
So, we thought of using an Infoset to create a view and then populatet he data.
In an traditional infoset, we could not specify a condition with a range. So, the infoset query through SQ02.
I have not tried using an APD, but that might be a good option.
Only thing, we'll have to use a Direct DSO - which i am not sure will satisfy our requirement.
Thank you.

Help with Query and report assignment

Hi,
I am able to attach 2 transactions (e.g. MM03 and ME23) to my SAP Query through report assignment. My question is how do I skip the selection screen that asks me if I want to Display Material or Display PO?
What i want to happen is in my report, if I click on the material - MM03 is called and if I click on the PO, ME23 is called.
Is this even possible through queries?
Cheers.

Thanks for replying.
I did as suggested and added the following at the start of my code.
AT LINE-SELECTION.
GET CURSOR FIELD FILD_NAME VALUE F_VALUE.
I set a breakpoint in AT LINE-SELECTION and when I executed my query, it wasn't passing through it.
When I removed the line AT LINE-SELECTION, it passes through GET CURSOR FIELD, but FILD_NAME is not populated. It's blank.
Below is my code at the moment:
data: fild_name(30), F_VALUE(50).
*AT LINE-SELECTION.
GET CURSOR FIELD FILD_NAME VALUE F_VALUE.
if fild_name = 'MAT'.
PARAMETERS P_MATNR LIKE MARA-MATNR. "DD ref. as in MM03
SET PARAMETER ID 'MAT' FIELD P_MATNR. "ID for MARA-MATNR
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
endif.
Appreciate any help.

How Transportation of Adhoc Query is done through RSAQR3TR report.

Hi,
How Transportation of Adhoc Query is done through RSAQR3TR report.i want to transport a new usergroup, new infoset and a query from Develpment to Quality and Production.
I have gone through the documentation of the RSAQR3TR report and as well as the SAP library material, but still i am confused.
Please help

Hi,
http://www.sap-img.com/basis/transport-of-abap-query.htm
Hope this helps.
Regards,
Rashmi

Crystal report from SAP infoset query

Hi All,
I am facing a problem in a crystal report which is based on Infoset query. When I run the report after passing the parameters it gives me an error "Database error occured" "Parameter field value does not exists" "RFC Closed"
But if I run the same Infoset query from SQ01 I am able to run it with same paramenter and it returns many records.
To be very precise I am running the best practice crystal report "Cost Analysis - Planned vs. Actual Order Costs" which is based on infoset query CO_OM_CA_20_Q1.
It throws me error that "Controlling Area does not exists".
Did anyone faced similar problem?
Best Regards,
Chetan

Hi,
log into your SAP ERP system using the SAP GUI and choose in the SAP Menu the following path:
SAP Menu -> Accounting -> Controlling -> Cost Cetner Controlling ->Environment->Set Controlling Area.
Set the desired controlling area for your user there (DO NOT FORGET TO CLICK ON THE DISKETTE ICON) and try again.
Regards,
Stratos

How to transport the BW query's variable to BO webi report

Hi all
I'd like to know how to transport the BW query's variable to BO 's webi . today ,I created a sap customer varible in my bw system to get the max calmonth in the active table.The varible in the BW side run's well ,but I use this query to build a new univers ,and created a new webi report base on this univers ,but the question is the webi report can't get the varible's value I wann to know how to transport the bw varible value to BO webi report
Thanks and regards,
Peter .zhu

I have changed my variaable in my bw query ,I found if you use SAP default variable it is ok in BO side . So I get a guidline by SAP default variable ,I changed my customer variable in variables edite ,don't use 'ready for input' .And then the variable can be useful in BO side .
Edited by: peter zhu on Jun 16, 2008 11:43 AM

I am facing a problem in a crystal report which is based on Infoset query

Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1
Best Regards,
Srinivas

Hi,
I would first of all suggest you don't open the same question twice. this looks like a duplicate to this entry:
Best Practices v3.31 - SAP InfoSet Query connection
Did you assign the queries and the infosets to an InfoSet user group and you assign the SAP account to it as well ?
Ingo

I am facing a problem in a crystal report which is based on Infoset query.i

Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1

Please re-post if this is still an issue to the Business Objects Integration Kits - SAP Forum or purchase a case and have a dedicated support engineer work with you directly

ABAP Query: Access variables in ABAP Program through InfoSet Query.

Hi,
While generating a report using ABAP Query Tool, how can we access the variables in the ABAP Program in the InfoSet Query?
Thanks in Advance!!!

HI,
Dear, it seems that you have changed the query in SQ02 and then just save it and not generated.
or may be after generation again clicked on SAVE button.
So untill unless you will not generate the query, it won't work.
Secondly, by chanegs in the query, i don't think it changes the name of the main program.
Regds,
Anil

SAP Infoset Query Reporting Set Restriction by Org. Structure

Dear Experts,
I am giving some new users a demo on using Infoset Query on an IDES server.
I am using the user group Personnel Administration (PA) and the HRDATA infoset.
As per my understanding, I should be able to restrict the reporting set according to organizational structure as the infoset is based on logical database PNP. However I am only seeing "No. of hits" in the restrict by drop-down (as can also be seen in the screenshot).
What am I missing to be able to see the restrict by option of "Persons along organizational structure"?
All assistance in this regard is really appreciated.
Regards,
Talha

Dear Azury,
Thankyou for your response.
Your solution is perfectly sound for fulfilling the purpose.
However, because I am conducting a demo, I thought a reporting set restriction on the main screen would be more appealing, than an additional selection screen.
In a demo screenshot I have seen that the restrict by option "Persons along organizational structure", is listed right under "No. of hits" like in my screen shot. Can you shed some light on that. I am attaching the demo screenshot I am talking about for reference as well
Thanks,
Talha

Transport of infoset Query through Report RSAQR3TR

Similar Messages

Maybe you are looking for