Transport of locking settings / locking characteristics

Hi @ all,
is it possible to transport locking settings/lock characteristics (for an InfoCube) from development to production system. I couldn't find the correct object in the transport connection. Or do I have to set it manually in the produktion system?
Kind regards,
Johannes

You can't transport the lock settings.
You have to do them manually in each system.

Similar Messages

Transport overwrites original - although locked in transport request

Dear all,
we have a very special system landscape and therefore a very special transport problem.
An include in the original system was overwritten by a transport although it was locked in a transport request.
To explain the circumstances:
We develop and support several releases of a pre-configured SAP Template for BW 3.5 and ERP 2004. After launching a new release we build up new systems as support stream for this release.
For example BW development system for release 3.1 was TBD, after launching of release 3.1, we copied TBD to TBE. Thus, TBE is the support system for release 3.1 and TBD becomes the development system for the next release 4.0.
Normally, a correction in release 3.1 (TBE) has to be included in 4.0 (TBD), too. Thus, all support systems are included in one transport landscape.
It happened that a developer made a correction in an include in TBE and transported it to TBD. Unfortunately, another developer had enhanced this include in TBD and didnt release the transport. So this changes were overwritten with the import from TBE although it was locked in a transport.
I investigated this case and found out, that it could be overwritten because TBD is the original system of this include and therefore it has no repair flag when its locked in a transport which protects it against overwriting.
We have to import the transport with the option Overwrite originals because in most cases a correction has to be imported in the original system.
Do you have any suggestions how we can avoid this happening?
Is there a possibility so set the repair flag in TBD manually?
Thanks in advance for your help.
Regards,
Karin.

Hi Max
I tried this already but it doesn't work.
Following system message occurred:
Cannot change task type
Message no. TR857
Diagnosis
You can only change the request type if this is permitted by the type of objects in the request.
The requirement is not met in this case.
Karin.

RCOCB004 - meaning of lock settings

Hi gurus,
what might happen if the lock settings of RCOCB004 (send process messages, plant dependent) are set to "No lock, paralle jobs allowed".
Do I have to expect some consequence such as inconsistencies ?
background: we send the process msg. event-triggerd with a job. Sometimes the situation occurs that one prcess has been startet (but not yet finished) and the next event triggers a new start of this job which leads to cancelation.....

When the variant assigned to the background job for RCOCB004 has "Lock with Lock Group" radio button checked, here is how the system behaves:
If the background job is already active and a new process message is created, the background job is NOT triggered again. The new process message will not be picked up by the job that is already active. The new process message will NOT trigger the background job even after the job that was active is finished. The new message will be in u201CTo be Sent Statusu201D. This new message will continue to be in u201CTo be Sent Statusu201D till another message is created which will trigger the background job. This background job will pick up all of the messages that can be picked up for processing based on the selection parameters in the variant (e.g u201CTo be Sentu201D, u201CTo be Re-submittedu201D, u201CTo be Resubmitted w warningu201D etc.)
When the variant assigned to the background job for RCOCB004 has "Parallel Jobs Allowed" radio button checked, here is how the system behaves:
If the background job is already active and a new process message is created, the background job is triggered again. There will be 2 jobs active. With this setup, the new process messages get picked up even if there is a background job that is already active. However, if the new process message is related to an object that is already being processed by the first job that is active, the new message may not be processed and be set to u201CTo be Re-submittedu201D status due to locking of the objects like reservation. This message in the u201CTo be Re-submittedu201D status will not be processed till a new message is created and the background job is triggered again.
Please let me know if you need additional information.
Thanks and Regards,
Prabhu

Is there any reason that my lock keeps unlocking in my network settings? Is there any way to keep it locked? It sure is inconvenient when I have to reboot to get back on the internet and re-lock that lock.

Is there any reason that my lock keeps unlocking in my network settings? Is there any way to keep it locked? It sure is inconvenient when I have to reboot to get back on the internet and re-lock that lock.

You could try changing the settings in System Preferences/Security & Privacy/General/Advanced/Require an Administator password to access locked preferences
But this will affect all Preference settings.

FCP settings lock

Hi All,
Is there a way to lock settings on FCP? For example is I want to only have it just do DV NTSC? I don't want others changing it to PAL, HDV, or HDTV.
Thanks for any ideas
Babak

Setting up separate User Accounts would be the best way, as Michael has already suggested. But if you really want to keep everything the same from one session or project to the next, locate the main Final Cut Pro preference file, right-click on it and select "Get Info" and click the LOCKED checkbox. Preferences changes from then on will default back to whatever state they were in when you locked the file on each and every launch of FCP.
-DH

Transport of RSPLSE settings

Hi experts,
Is there any way to ransport lock settings made in RSPLSE? We have adjusted settings for several cubes in dev. Do we need to make the same in al, the systems (test, perofrmance, user acceptance, regression, production....) or there is a wy to transport them?
Thanks in advance,
Marcin

Hi,
please take a look at
[Is RSPLSE setting Transportable ?;
Thanks Matthias

Is there Cap lock shift lock in Pages for iPad?

Using pages for iPad is there cap lock/shift lock function. It is very difficult to do headings or posters without this function.

Go to Settings > General > Keyboard and turn Enable Caps Lock to On. When Enable Caps lock is On then double-tapping the shift key will lock it down (it turns all blue). YOU CAN THEN TYPE ALL CAPS,
Message was edited by: JimHdk

Get-Counter : The \\ServerNameHere\\SQLSERVER:Locks(_Total)\Lock Waits/sec performance counter path is not valid.

I have the following code:
Import-Module "sqlps" -DisableNameChecking
#####http://www.travisgan.com/2013/03/powershell-and-performance-monitor.html
function ExtractPerfmonData
    param(
        [string]$server,
        [string]$instance
    [Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet]$collections
    $monitorServer = "MonitoringServerNameHere"
    $monitorDB = "MonitoringDatabaseNameHere"
    $counters = @(
        "\$($instance):Memory Manager\Memory Grants Pending",
        "\$($instance):Memory Manager\Target Server Memory (KB)",
        "\$($instance):Memory Manager\Total Server Memory (KB)",
        "\$($instance):Buffer Manager\Buffer Cache Hit Ratio",
        "\$($instance):Buffer Manager\Checkpoint pages/sec",
        "\$($instance):Buffer Manager\Page Life Expectancy",
        "\$($instance):General Statistics\User Connections",
        "\$($instance):General Statistics\Processes Blocked",
        "\$($instance):Access Methods\Page Splits/sec",
        "\$($instance):SQL Statistics\Batch Requests/sec",
        "\$($instance):SQL Statistics\SQL Compilations/sec",
        "\$($instance):SQL Statistics\SQL Re-Compilations/sec",
        "\$($instance):Locks(_Total)\Lock Waits/sec"
    $collections = Get-Counter -ComputerName $server -Counter $counters -SampleInterval 1 -MaxSamples 1
    $sampling = $collections.CounterSamples | Select-Object -Property TimeStamp, Path, Cookedvalue
    $xmlString = $sampling | ConvertTo-Xml -As String
    $query = "dbo.usp_InsertPerfmonCounters_SQLServer '$xmlString';"
    Invoke-Sqlcmd -ServerInstance $monitorServer -Database $monitorDB -Query $query
#####ExtractPerfmonData -server "YourRemoteServerName" -instance "MSSQL`$SQLTest"
ExtractPerfmonData -server "ServerName1Here" -instance "SQLSERVER"
ExtractPerfmonData -server "ServerName2Here" -instance "SQLSERVER"
ExtractPerfmonData -server "ServerName3Here" -instance "MSSQL`$InstanceNameHere"
ExtractPerfmonData -server "ServerName4Here" -instance "SQLSERVER"
(I have 93 instances listed; here I just gave a sample of 4.)
For only one instance I get the following error message:
Get-Counter : The
\\ServerNameHere2\\SQLSERVER:Locks(_Total)\Lock Waits/sec performance counter path is not valid.
All of the instances should have been set up the same, so I am confused as to why this error only occurs on this one instance. I do not know where to look. Has anyone ever seen this type of error before?
lcerni

Here is the output of the first script:
CounterSetName
...       (eliminating non sql server counters here)
SQLAgent:Alerts
SQLAgent:Jobs
SQLAgent:JobSteps
SQLAgent:Statistics
SQLServer:Access Methods
SQLServer:Availability Replica  SQLServer:Backup Device
SQLServer:Batch Resp Statistics
SQLServer:Broker Activation
SQLServer:Broker Statistics
SQLServer:Broker TO Statistics
SQLServer:Broker/DBM Transport
SQLServer:Buffer Manager
SQLServer:Buffer Node
SQLServer:Catalog Metadata
SQLServer:CLR
SQLServer:Cursor Manager by Type
SQLServer:Cursor Manager Total
SQLServer:Database Mirroring
SQLServer:Database Replica
SQLServer:Databases
SQLServer:Deprecated Features
SQLServer:Exec Statistics
SQLServer:FileTable
SQLServer:General Statistics
SQLServer:Latches
SQLServer:Locks
SQLServer:Memory Broker Clerks
SQLServer:Memory Manager
SQLServer:Memory Node
SQLServer:Plan Cache
SQLServer:Query Execution
SQLServer:Replication Agents
SQLServer:Replication Dist.
SQLServer:Replication Logreader
SQLServer:Replication Merge
SQLServer:Replication Snapshot
SQLServer:Resource Pool Stats
SQLServer:SQL Errors
SQLServer:SQL Statistics
SQLServer:Transactions
SQLServer:User Settable
SQLServer:Wait Statistics
SQLServer:Workload Group Stats
...       (eliminating non sql server counters here)
lcerni

Cap lock is locked. Tried everything.

I have MacBook Pro.
My "caps lock" is locked on. And the light is not on. Once it just froze and went to safe mode. I was not able to log in because it would not not accept my password since my password is with lowercase. I was able to log in by running OS X Install DVD and pressing Control-Comand - P. But the problem did not go away. Whatever I type is in CAPS. And all the folders act funny. They don't open up right away but rather come to the front very slow. It gets more interesting. I thought the problem is a keyboard. BUT when I switch to WINDOWS Parralel Desktop it WORKS FINE. I can type in LOWER case letters.
Also, I am able to log in via SAFE mode by connecting external keyboard. Any way, I have tried different account, PRAM and SMC resets couple of times each as has been suggested in previous posts. I did check all keyboard settings and so on. I did check shift and other keys.They all look fine. Basicly I have tried everything that has been suggested.
Please, advise.

DID YOU EVER GET A RESOLUTION TO THIS?
I HAVE THE SAME PROBLEM>>>
can only get lowercase letters using an external USB keyboard.
Shift and Caps Lock keys are clean and unadulterated... they were working great yesterday.
help???

I have mac book air os x 10.8.2 i create a photo library on iPhoto and i moved it to my time capsule disk now i try to access library from my wife mac book running on mac os x 10.5.8 i always receive library locked on locked disk

i have mac book air os x 10.8.2 i create a photo library on iPhoto and i moved it to my time capsule disk now i try to access library from my wife mac book running on mac os x 10.5.8 i always receive library locked on locked disk

Unless you can set the Time Capsule's drive to have it's ownership ignored
you won't be able to use the library on the same volume as the Time Machine backups.
OT

Enqueue: Elem.lock 0 contains unpermitted lock mode . lock object EZBEV_BO

Hello Guru's,
we have a unusual problem in the syslog of our ERP System.
Enqueue: Elem.lock 0 contains unpermitted lock mode . lock object EZBEV_BO
We can't found any note or forum entry to solve this.
We checked SAP Notes: 1324099, 891372, 606425, 447242, 1260601 and searched in the forum, but nothing helpful found.
System Data:
ERP 6.0 / NW7.01 with EHP4
SAP Kernel : 701_REL
created on : Jan 18 2010 21:47:07
Kernel Patch number : 77
Source ID : 0.077
DBSL Patch No. : 075
Database
ORACLE 10.2.0.2
Operating System
AIX 5.3
Can someone help?
regards
Chris

developer error

Itunes library.itl is locked, on locked disk or you dont have permission 4.

itunes library.itl is locked, on locked disk or you dont have permission 4.
i tried the other suggestions and i cant get rid of this message.
can anyobdy help?

I had that problem too. I tried to remove iTunes from my computer and then download it again, but that did not make any difference. Then I tried polydorus' answer ("starting iTunes with the shift key held down, when asked to choose a library, navigate to your iTunes folder and choose iTunes Library.itl"), but that did not work either and that same message about the library being locked appeared again.
Then I had a brainwave. I deleted that iTunes library.itl file. (To find it, go to My documents, then My Music, then iTunes, and there is the itunes library file). I now tried to open iTunes by clicking on the iTunes icon on my desktop, nothing happened, as if I had not clicked on it at all. I restored the file from the recycling bin to where it was before. But that also returned me to where I had been before, i.e. I got that locked-library message again. So I deleted that file again. Then I tried right-clicking on the iTunes icon. On the little menu that appeared, I clicked 'Open' and hey presto, suddenly the iTunes set-up assistant appeared and everything went smooth from then on. When I checked, there was a file called iTunes library.itl again and this one worked OK.
By the way, I did not lose any of my music downloads or podcasts when I deleted that file, so it's definitely worth a try.

Enqueue: Elem.lock 0 contains unpermitted lock mode /. lock object

Hello All,
SCM 5.0 system which is upgraded from 4.1:
System log entries contains:
<b>Enqueue: Elem.lock 0 contains unpermitted lock mode /. lock object /sapapo/E</b>
Work process log file contains :
LOG GE8===>0 /sapapo/E_MATLOC
I have gone through few notes like 606425, 447242.( lower version)
From which I came to the conclusion that it is program error.
Also group GE and No:8 What does it mean?
Please let me know your thoughts.Thanks.
Regards,
Tushar
Message was edited by:
Tushar Chavan
Message was edited by:
Tushar Chavan

Hi,
I found one more note :
Note 891372 - Lock entries for TemSe obj remain after completion of proc
The issue looks pretty similar. I think the notes you found are better suited for sap apo.
Log a call with SAP and check what they have to say.
Regards,
Siddhesh

Can't lock the lock in accounts/ time -date and other applications

Hi I am new to these discussions and i am hoping someone can help me with my problem.
The best way is to explain what happened..
I have a 2 core duo Macbook with 10.5.1 installed and I was screen sharing with my g5 desktop that also has 10.5.1 on it, once I was done I shut down my Macbook, and when I went to start it up, later on that evening, I had to now login (Where I have always had it on automatic login ). So I went to accounts to reset it but it was still set to automatic so when I, went to lock the lock I no longer could lock it no matter how many times I would click on it. (Just to mention that the lock was open by the way which seemed odd to me because it was always locked before) The same thing now occurs in time and date. I also went to check info on my hard drive and there is no lock on the bottom right hand side when there was one before.
I went to disk utility to repair, the utility would stop after a few seconds with the message in red "The underlying task reported failure on exit" I do not know what that means at all. So there is my situation.. Did I loose something, do I need to install something. Any help work be greatly appreciated. Thanks

What will happen if I am unable to repair it?
Right now I can login, I do not like doing it I wish the automatic function worked but I guess at this point I have access to all my files and everything seems to work except that I can not lock the lock in any application and that I have to log in every time I start up. The only other thing is I can not do any disk permission repair.
I will pick up a disk warrior when it is ready to 10.5.
I guess my original question is will my computer be ok like this or will things get worse?
Thanks for your assistance.

OEDQ Jobs erroring - Error Code: Cannot acquire lock, already locked

Hi experts
our Real time Individual match job is erroring out with above error code. Real time Individual clean and Real time Individual Cluster are working fine. What could be the reason for this?
(log file extract:
SEVERE: 06-May-2013 14:54:39: Cannot acquire lock: already locked (Code: 207,002)
com.datanomic.director.missionmanager.exceptions.MissionExecutionException: Cannot acquire lock: already locked (Code: 207,002)
     at com.datanomic.director.missionlieutenant.plan.MissionExecutionPlan.execute(MissionExecutionPlan.java:961)
     at com.datanomic.director.missionlieutenant.executor.MissionExecutor.runMissionNow(MissionExecutor.java:205)
     at com.datanomic.director.missionmanager.manager.MissionManager$3.run(MissionManager.java:537))
second question:
we do have setup OEDQ for key generation (Our Siebel OCH is on 8.1.1.10). When we run Siebel Key Generate jobs on Contacts and Accounts, we do get records created in SIEBEL.S_DQ_ORG_KEY and SIEBEL.S_DQ_CON_KEY. Is this table where they are supposed to be generated?
third question:
Does Siebel OCH support Address matching?
more questions to come in near future
THANKING YOU IN ADVANCE!!
rgrds
m
Edited by: user3035423 on 6.5.2013 8:18

Hi Nick. thanks for your reply.
I am newbie to the OEDQ. When you say that proces is open in Director, what does it mean? How can i close it?
In order to overcome this situation i did
1. stop datanomic service on Win2003 server
2. started Job Main Initialize reference Data in EDQ-CDS - initialize Reference Data project and waited to finish
3. started Job Real- time START ALL in EDQ-CDS project
4. this is the step where some of the jobs are errorong out, as stated before
From above to mee it looks like there should not be any process open in Director.
can you please share your thoughts
thanks
rgrds
m

Transport of locking settings / locking characteristics

Similar Messages

Maybe you are looking for