Transport of mitigation controls from GRC Dev to GRC Production in 10.0

Hi All,
Is there an option to transport mitigation controls from Dev to Prod in 10.0. Where is that option available. We could not find even download or upload option unlike 5.3 in 10.0
Thanks and Best Regards,
Srihari.K

Hi
I can see that this question is marked as answered . Could you please update what steps were taken for transporting mitigation controls? Thanks
Best Regards
Srilakshmi S

Similar Messages

  • Bringing mitigating controls from PC to AC in GRC 10.0

    Hi ,
    I am going through remediation process in GRC 10.0, However there are no mitigation controls setup in AC.
    my client is asking me to copy all the mitigating controls from PC to AC.
    Is this possible ? if yes, What will be the process ?
    Thank you.

    Hi Sri,
    you can achieve by downloading and uploading the mitigations.
    Go to SE38 and use the following program GRAC_DOWNLOAD_MIT_ASSIGNMENTS to download the file and make necessary changes to it and upload the file by using the following program GRAC_UPLOAD_MIT_ASSIGNMENTS.
    and put the active column in the file as X.
    Regards,
    Venugopal Ireni

  • Transport Error from BI Dev to BI Production

    Hi all,
    I am started the BI transport from BI dev to BI production. we are not having BI quality.
    I am transporting the DSO and the total data flow to the production.
    I have copy the 0FIAR_O03 DSO to the Z DSO and i am transporting thr Z DSO(ZFIAR_O3) to BI production.
    While transportation i am getting below error.
    DataSource 8ZFIAR_O3 does not exist in source system EBP740 of version A                                                            |
    Reading the Metadata of ZFIAR_O3 ...
    Creating DataSource 8ZFIAR_O3 ...
    Application component DM of DataSource 8ZFIAR_O3 does not exist
    Error when creating the export DataSource and dependent Objects
         | Error when activating DataStore Object ZFIAR_O3                            
    Please suggest.
    I have transported all the objects propely.
    Regards,
    Macwan James

    Hi James,
    This issue could be because the Application Component hierarchy might not be installed in Production System.
    Collect the Application Components and transport to Production. Then reimport the failed request, should resolve.
    Regards,
    Chathia.

  • Creating Mitigation Control from CUP

    Hi Guys,
    Is this feature implemented in Access Control???? Or Stills as enhancement

    Hi Alpesh
    In order to your answer... Can you help me to identify what I doing wrong when I want to approve a mitigate control in CUP.
    Path 1 : Approve request
    Stage 1: Request
    Stage 2: Security
    Stage 3: Role Owner
    Detour Path:
    Type: CUP
    Stage: Role Owner
    Condition: SoD Review
    Detour Path: Path 2
    Path 2:
    Stage 1: Approval -- > CAD : Mitigation Monitor
    The request is send to the Mitigation Monitor but when we try to approve request show the next error:
    2010-03-30 14:10:26,390 [SAPEngine_Application_Thread[impl:3]_25] ERROR  Mitigation control TEST_5.1 could not be saved for user PRUEBAGRC_6
    com.virsa.ae.core.BOException: Exception from the service : Mitigation record doesn't exist
         at com.virsa.ae.accessrequests.bo.MitigationControlBO.insertMitigationControl(MitigationControlBO.java:207)
         at com.virsa.ae.accessrequests.bo.MitigationControlBO.saveMitigationControls(MitigationControlBO.java:321)
         at com.virsa.ae.accessrequests.bo.RequestBO.callAEExitService(RequestBO.java:6993)
         at com.virsa.ae.accessrequests.bo.RequestBO.callExitService(RequestBO.java:6748)
         at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:6600)
         at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:6393)
         at com.virsa.ae.accessrequests.actions.RequestViewAction.confirmRequestApproval(RequestViewAction.java:949)
         at com.virsa.ae.accessrequests.actions.RequestViewAction.execute(RequestViewAction.java:104)
         at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:295)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:431)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:461)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:461)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.virsa.ae.service.ServiceException: Exception from the service : Mitigation record doesn't exist
         at com.virsa.ae.service.sap.MitigationControlWS52DAO.checkForSuccess(MitigationControlWS52DAO.java:832)
         at com.virsa.ae.service.sap.MitigationControlWS52DAO.executeUpdateUserMitigation(MitigationControlWS52DAO.java:287)
         at com.virsa.ae.service.sap.MitigationControlWS52DAO.insertUserMitigation(MitigationControlWS52DAO.java:309)
         at com.virsa.ae.accessrequests.bo.MitigationControlBO.insertMitigationControl(MitigationControlBO.java:195)
    Can you help me please?? All URI are OK.
    Thanks !!!!
    Edited by: Karen_sans on Mar 31, 2010 7:45 PM

  • Transporting module pool program from sand dev to dev system

    Hi,
    Can any body tell me how to transport module pool objects(including screens) from sand dev to dev system rather than manually with in the same client.
    regards,
    prasad reddy.

    Hi
      Go to Screen painter and give your program name which you wanted to transport.
      Go to --> Object directory entry  and there enter Development class and press enter then it will ask for request,. create a request accordingly.
      Then you can release the sub task and give the main request to your Basis person to move it to target system.
    Regads
    Suresh

  • Transportation of Work books from BW Development to BW Production

    Hi,
    I have Transported 0FIGL_C01 InfoCube from BW Development to BW Production and have loaded Data also.
    with the cube Queries have also come in the BW Production..
    But i did not get workbooks in BW Production?
    How to bring work books into BW Production?
    Please tell me step by step procedure
    Help will be greatly appreciated...
    Thanks in advance...
    This is ver urgent...

    Hi
    Unlike Queries, usually workbooks are saevd either under a role or under Favourites.  So if you have saved the your workbooks under a role, you need to have that role assigned to you to view the workbooks. The roles and profiles might be quite different in dev and QA because of authorisations, so look into them carefully. If the developer saves the workbook as a favorite can you still transport it and see it? After transporting the workbooks you will need to retransport the roles they are assigned to. Once the roles are transported after the Workbook transport ..all the workbooks are visible.. The  rule is to transport the roles only once and never after, else all workbooks contained in that role in the target system will be wiped out.
    Just for safety sake, it is a good idea to maintain all the workbooks on a secure location, so that in case they are wiped out, you can use these to re-establish them. We create our workbooks directly in production.You can also confirm this by going to RSA1 -> Transport Connnection -> Click on Object Types -> Expand Query Elements -> Query -> double click Select Objects -> Search by your query Technical name -> Transfer. Once you get ur Query and all its object in the righmost box, under Transport request column you should see the Request number that you have created for all the query elements you have changed. If this is not the case then you assign it by checking the transport box for the query and Transport button

  • Transporting Iviews from QA/DEV system to production system

    Hello All,
    I have some iviews that are based on BW report Iview (BEX ). I have them developed in the qa environment. How can I transport the same iview to the production server.
    The portal landscape is some thing like this.
    We have a devlopment and qa portal , these are accessing the DEV and QA bw systems respectively.
    Then we have a production portal server and a production BW server.
    Now we have developed some reports in BEX and those are published on the development portal using Web Application Designer.
    How can we trasport the same iviews to the production environment? or first of all is it possible to transport the same? We are on EP 5.0 Sp4 and BW 3.5
    Thanks in advance
    Pradeep Bhojak

    Bhojak,
    Yes it is possible to do it. Look at export option under System Admin menu. You can export everything as a package and import the same pakage into your Production system.
    Good Luck.
    GO.

  • How to transport the webdynpro applications from development production

    Hi Experts,
    We are implementing the first time NWDI for development.
    As per my knowledge . There will only NWDI available for the whole landscape to manage and track the information.
    NWDI will only one for the whole landscape?
    How do we need to transport the ;build application from the dev sytem to production through NWDI.?
    How the transport life cycle will be managed with NWDI and with out using NWDI?
    As of my knowledge . we need to specify the production or testing mechine information in the NWDI to transport the build file from deve to -> testing to -> production.
    Because my clients not allowing to specify the the production system information in nwdi to transport from dev to prodution using nwdi?
    what is the other solution available?
    By giving the production information in NWDI will give any problems futher?(like security).
    Regards
    Vijay

    HI,
    NWDI is Simply used to manage life cycle.
    A developer will develope application. that time he needs to create an activity.
    1. when activity is checked in & activated -> code is sent to DTR in development space, and CBS builds that code and its .sda or .ear file is deplopyed on development server.
    2. same when you release it -> code is sent to DTR in Consolidation space  and CBS builds and deploy it on consolidation server.
    3. after that you can assemble you whole development in single file i.e. .sca file, and its get deployed on test server.
    simple..
    and if your client dont want to specify production system in NWDI., then when you assemble an .SCA file of your development, just copy it from CMS folder of your NWDI installed drive. and send it to your client..
    he will externally deploy it on production

  • Mass maintenance of Mitigation controls in GRC 10.0

    Dear All,
    How to do mass maintenance of mitigation in ARA of GRC 10.0. We successfully migrated the mitigation controls from 5.3 to 10.0. I need to change the monitors for many user conflicts and also add new user conflict mitigation controls. Is it possible to do a mass changes in GRC 10.0 as there is no upload functionality for mitigation controls
    Thanks and Best Regards,
    Srihari.K

    Hi Sri,
    you can achieve by downloading and uploading the mitigations.
    Go to SE38 and use the following program GRAC_DOWNLOAD_MIT_ASSIGNMENTS to download the file and make necessary changes to it and upload the file by using the following program GRAC_UPLOAD_MIT_ASSIGNMENTS.
    and put the active column in the file as X.
    Regards,
    Venugopal Ireni

  • Mitigation Control Migration From 53. to GRC10

    Hello,
    Can you please let me know where do I find a templete for downloading Mitigation Controls from 5.3 and how do I upload them in GRC 10?
    An early reply would be highly appreciated.
    Thank you.

    Hello,
    Can you share how you migrated the mitigation controls?
    While migration of the mitigation controls
    I get an error "Creation of object ID 00000000 is not allowed"
    I have different buisness processes for risks/functions and the mitigations...Is it something to do with that? or shoudl i create the business processes in GRC 10 before migration?
    I am pretty much stuck here...any help is really appreciated.
    Thanks,
    Raghav

  • Transportation of Datasouces from BI DEV to BI QAS

    Hi all,
             We have been facing some troubles  while transporting from the BI DEV to BI QAS side .Our R/3 DEV source system is IED200 and R/3 QAS is IED400. I have trasnported all respective datasources from R/3 DEV to R/3 QAS , replicating the same on the BI QAS side.While Transportation of the datasources  from BI DEV, its throwing back and RC=8 error . Its states that the Source System IED200 does not exist. Can you please suggest what is the next step that is to be taken ?

    Dear  Prathibha Pillai,
    Maintain source system conversion in Quality system.
    RSA1 --> Transport Connection --> Conversion(see button)
    Maintain new entry:
    Original Source system     Target Source System
    IED200                             IED400 
    Then re import.
    Hope it Helps
    Srini

  • Problems Transporting SAPQUERY INFOSET (Global) From DEV to Production

    I made modifications to an INFOSET using SQ01. I trapped the modifications in a transport. The modifications transported successfully to our Quality Assurance (Q/A) environment. When we move the transport to our Pre-Production environment the transport logs state it migratwed successfully, but the modifications are not present. Pre-Prod security mirrors our production environment, therefore I'm unable to "adjust" the infoset or generate it. That constitutes making changes which I'm not allowd to do in production.
    Is there an established method to transport a global infoset from a test environment to production?

    You can set the object changability flags to allow you to make mods to either of three major components of process chains:
    1.  Process chain - lets you change the chain
    2.  Process starter - lets you change the start process
    3.  Process variant - lets you change process variants
    Go to the admin workbench and select transport.  Find the changability options in the upper right portion of the screen and set the process starter to everything changeable.  Leave the other set to changable original or set to no changes to lock that portion down.
    That should get you around your current issue. 
    As an added check, us table RSPCCHAIN to figure out if the whole chain is ready and active for migrating.  Plug in the chain technical name and set the version to A and if the number of entries matches the number of processes all processes are active and ready to be migrated.

  • Mitigating Controls in GRC10

    Hi,
    Is their a way we can maintain and update mitigating controls on GRC (GUI) back-end.UI can't be able to find those i created and migrated. Any ideas?
    Regards, Melvin

    Hi,
    REF CALL # : 968707 / 2011
    I created mitigating controls and imported the old mitigating controls from GRC 5.3.
    When I go to the mitigating controls on the UI no mitigating controls appear when opening the page. When I do a drop down (drill) on the TAB (SETUP) Work Centre  Link - Mitigating Control
    When drilling down on Mitigating Control IDu2019s
    The only two displayed is the ones I created on the UI. When I import the GRC5.3 mitigating controls I get the following
    message on the import tool within GRC10 back-end
    --Start Loading File - Scenario of 5.3 Mitigation - Migration
    sapvirdevexport53/BUNITdata.dat
    Mitigation Control EA:BS001 already exists
    Mitigation Control EA:BU001 already exists
    Mitigation Control SOLMAN99 already exists
    --File loaded successfully
    The migration document refers to the following steps and this was followed
    Why is the screen empty when going into the mitigating control link on the  UI - Another strange phenomenon is when I run the mitigating report from report and analytics the mitigating control comes up blank.
    When in the report and analytic work centre, and running the mitigation control report - -> I drill down on the Control ID and get the blank screen.
    This is why im asking can I look at mitigating controls not from ECC but GRC back-end system and maintain it from their
    Regards, Melvin

  • RAR 5.3 SP10 Mitigating Control Import Utility

    All -
    I exported my mitigating controls from a RAR 5.3 SP9 system and imported them into a 5.3 SP10 system. I received a successful confirmation of the import, but when I "searched" my mitigating controls there were duplicated mitigating control numbers. It looks like the import tool duplicated the mitigating control ID for every "monitor" assigned to the mitigating control number. For example, mitigating control MC00000001 with Monitor1, Monitor2, & Monitor3 equated to 3 entries of MC00000001. If I try to delete 2 of the 3 entries, I receive a "Successfully deleted" message and get the error "Exception!!. No relavent language message available in database for :0053". When I "search" again, the mtigating control is no longer there (as expected).
    I confirmed my mitigating control import file does not have the multiple entries.
    Any ideas?
    Thanks,
    Daniel

    Venky,
    Thank you for your response. The message issue actually wasn't the one that I was asking about, but thanks for the heads up. The main issue is that RAR (5.3 SP10) is multiplying mitigating control entries for the number of monitors assigned to the mitigating control. It appears to be an issue with SP10 as it did not occur in SP9. I'm trying to see if anyone knows what the fix is.
    Thanks,
    Daniel

  • Mitigation control usage in PC 10

    Hi Experts,
    I am able to create Mitigation control under the PC of GRC 10. The same can be seen under the Mitigation control tab of AC. However, I am unable to see the mitigation controls that are designed under AC for assignment in PC. 
    Is there any configuration that has to be done to connect both AC and PC?
    Please let me know.
    Thanks,
    Suma

    Hello Adreas,
    Thanks for the reply.
    As you mentioned i have maintained the organization under Setup --> Organizations. However, I am still unable to see Mitigation controls under the subprocess.
    I see that I can create a new mitigation control when I navigate through Master data>select specific organization code> select the subprocess-->add new control. This tab shows the creation of new Mitigation control. However, it does not diplay the mitigation controls that were created under AC.
    Am I missing something? Please suggest.
    Thanks,
    Suma

Maybe you are looking for